———————————————————
>>>СКАЧАТЬ<<<
———————————————————
Download link
———————————————————
Драйвер leica flexline
Manage To manage jobs, data, codelists, formats, system memory and USB memory stick files. Бывало такое со слётом дров на кабель передачи данных Leica для TS-ки. На кабель передачи данных к тахеометру FlexLine? Begins the application Station Setup at the Enter target point! This port is located at the base of the instrument. Data can then be transferred to a computer or other device for post processing via a LEMO cable connected to the serial interface RS232 port. Что там не понятно? When pressing the legs into the ground note that the force must be applied along the legs. Using these tools helps to maintain the measuring accuracy of the instrument. When the electronic level is centered the arrow is replaced by a checkmark. Measured offset to the horizontal драйвер leica flexline including offset right and offset left.
Certain instrument settings can not be made in this way. Displays distance with three decimals. For the Resection method, the new station coordinates are calculated later. Необходимо просто переустановить драйвер и всё!
Right Horizontal offset to the right of the horizontal alignment. Что там не понятно? V-Right Sets face I to be when the vertical drive is on the right of the instrument. Aln List of available horizontal alignment files. Press REC to measure to the target point. Aln List of available vertical alignment files. Import data step- 1. Any deviation from this figure is termed vertical index error.
Драйвер leica flexline
Formatname If Format: Single Format Name of the format to be transferred. This overwrites any PPM scale previously set in the EDM Settings screens. При первичной передаче данных все было отлично com порт былпри повторном начало сбоить, у кого нить было такое же. A height can be defined manually instead.
Field Description Line Grid increment values. Select Offset from the COGO MAIN MENU.