/blkid

## blkid
/dev/sda1: LABEL="SYSTEM" UUID="5289-44BC" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="3ad50a81-ff0e-441e-980a-6cdfe0bc52b3"
/dev/sda2: LABEL="Recovery" UUID="5EC02477C0245813" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="7569b016-e2da-41a2-b116-7a0cf8b185a2"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="0397fe79-7134-4ecd-9706-5fbb5348e073"
/dev/sda4: UUID="6C72F2AD72F27B62" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="cd864342-7763-45c6-bdac-fc276c1d5460"
/dev/sda5: UUID="c14d9dd7-f264-4c15-ac49-6aff83059e70" TYPE="ext4" PARTLABEL="Manjaro" PARTUUID="98eab938-51aa-47c0-8c59-1134f6e10d6d"
/dev/sda6: UUID="d7741133-c24c-4e99-9633-018d30c5e334" TYPE="swap" PARTLABEL="Swap" PARTUUID="c8be27d5-38ea-4d65-a9b6-779764416608"
/dev/sda7: UUID="4aea8c24-3219-47de-b2f2-90e56dad595d" TYPE="ext4" PARTLABEL="Arch" PARTUUID="a2541d7b-a8c8-4a32-afc9-7031323be525"
/dev/sda8: LABEL="M-PM-^]M-PM->M-PM-2M-QM-^KM-PM-9 M-QM-^BM-PM->M-PM-<" UUID="D278ACE078ACC517" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c09ffa27-eadb-42a0-8662-271ba1ff4c51"
/dev/sda9: LABEL="Data" UUID="24769EF6769EC7C6" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="a44bf304-23b3-4283-8974-b44a485834ec"
/dev/sda10: LABEL="Restore" UUID="5C882AD8882AB086" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="989dde71-b662-48d6-ad1b-23a786ccb72c"

## etc>modprobe.d>blacklist.conf
blacklist btusb
blacklist nouveau

## fstab
#
# /etc/fstab: static file system information
#
# <file system>		<dir>		<type>		<options>			<dump>	<pass>

# /dev/sda7
UUID=4aea8c24-3219-47de-b2f2-90e56dad595d	/	ext4	rw,relatime,data=ordered	0 1

# /dev/sda1 LABEL=SYSTEM
UUID=5289-44BC	/boot/efi	vfat	rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro	0 2

# /dev/sda6 SWAP
/dev/sda6			swap		swap		defaults,noatime	0	0

## inxi -F
Resuming in non X mode: xrandr not found. For package install advice run: inxi --recommends
System:    Host: Asus Kernel: 4.4.14-1-lts x86_64 (64 bit) Desktop: KDE Plasma 5.6.5 Distro: Arch Linux
Machine:   System: ASUSTeK (portable) product: X555LD v: 1.0
           Mobo: ASUSTeK model: X555LD v: 1.0 Bios: American Megatrends v: X555LD.402 date: 10/29/2015
Battery    BAT0: charge: 27.9 Wh 86.1% condition: 32.4/37.3 Wh (87%)
CPU:       Dual core Intel Core i3-4030U (-HT-MCP-) cache: 3072 KB
           clock speeds: max: 1900 MHz 1: 1799 MHz 2: 1799 MHz 3: 1800 MHz 4: 1799 MHz
Graphics:  Card-1: Intel Haswell-ULT Integrated Graphics Controller
           Card-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M]
           Display Server: N/A driver: intel Resolution: 155x35
Audio:     Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel Sound: ALSA v: k4.4.14-1-lts
           Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: enp2s0 state: down mac: 38:2c:4a:29:6b:b3
           Card-2: Broadcom BCM43142 802.11b/g/n driver: wl
           IF: wlp3s0 state: up mac: 30:10:b3:c0:98:22
Drives:    HDD Total Size: 500.1GB (2.7% used) ID-1: /dev/sda model: WDC_WD5000LPVX size: 500.1GB
Partition: ID-1: / size: 14G used: 6.9G (54%) fs: ext4 dev: /dev/sda7
           ID-2: swap-1 size: 6.44GB used: 0.06GB (1%) fs: swap dev: /dev/sda6
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A
           Fan Speeds (in rpm): cpu: 2800
Info:      Processes: 156 Uptime: 1:36 Memory: 1243.3/3840.4MB Init: systemd Client: Shell (bash) inxi: 2.3.0

## lsblk
NAME    MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda       8:0    0 465,8G  0 disk
├─sda1    8:1    0   100M  0 part /boot/efi
├─sda2    8:2    0   900M  0 part
├─sda3    8:3    0   128M  0 part
├─sda4    8:4    0    50G  0 part
├─sda5    8:5    0    20G  0 part
├─sda6    8:6    0     6G  0 part [SWAP]
├─sda7    8:7    0    14G  0 part /
├─sda8    8:8    0    80G  0 part
├─sda9    8:9    0 274,7G  0 part
└─sda10   8:10   0    20G  0 part
sr0      11:0    1  1024M  0 rom

## lsblk -f
[maxim@Asus ~]$ lsblk -f
NAME    FSTYPE LABEL     UUID                                 MOUNTPOINT
sda
├─sda1  vfat   SYSTEM    5289-44BC                            /boot/efi
├─sda2  ntfs   Recovery  5EC02477C0245813
├─sda3
├─sda4  ntfs             6C72F2AD72F27B62
├─sda5  ext4             c14d9dd7-f264-4c15-ac49-6aff83059e70
├─sda6  swap             d7741133-c24c-4e99-9633-018d30c5e334 [SWAP]
├─sda7  ext4             4aea8c24-3219-47de-b2f2-90e56dad595d /
├─sda8  ntfs   Новый том D278ACE078ACC517
├─sda9  ntfs   Data      24769EF6769EC7C6
└─sda10 ntfs   Restore   5C882AD8882AB086
sr0

## mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES="i915" //без него тоже не работает

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect block filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev block filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev block mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev block lvm2 filesystems"
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
#HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
HOOKS="base udev autodetect modconf block filesystems keyboard resume fsck"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""

## refind_linux.conf
"Boot with standard options"        "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d initrd=/boot/intel-ucode.img initrd=/boot/initramfs-linux-lts.img resume=/dev/sda6 fbcon=scrollback:1024k acpi_osi="
"Boot to single-user mode"          "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d   single"
"Boot with minimal options"         "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d"

## Установленные мной пакеты (кроме base и base-devel)
$pacman -Qqe | grep -v "$(pacman -Qqg base base-devel)"
ark
broadcom-wl-dkms
dolphin
dolphin-plugins
gimp
intel-ucode
inxi
iw
kate
kcalc
kde-l10n-ru
konsole
linux-lts
linux-lts-headers
ntfs-3g
p7zip
partitionmanager
plasma-meta
polkit
qbittorrent
refind-efi
rfkill
smplayer
smplayer-themes
ttf-liberation
unrar
unzip
wget
wpa_actiond
wpa_supplicant
xorg-server
yakuake
yandex-browser-beta
	/dev/sda1: LABEL="SYSTEM" UUID="5289-44BC" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="3ad50a81-ff0e-441e-980a-6cdfe0bc52b3"
	/dev/sda2: LABEL="Recovery" UUID="5EC02477C0245813" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="7569b016-e2da-41a2-b116-7a0cf8b185a2"
	/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="0397fe79-7134-4ecd-9706-5fbb5348e073"
	/dev/sda4: UUID="6C72F2AD72F27B62" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="cd864342-7763-45c6-bdac-fc276c1d5460"
	/dev/sda5: UUID="c14d9dd7-f264-4c15-ac49-6aff83059e70" TYPE="ext4" PARTLABEL="Manjaro" PARTUUID="98eab938-51aa-47c0-8c59-1134f6e10d6d"
	/dev/sda6: UUID="d7741133-c24c-4e99-9633-018d30c5e334" TYPE="swap" PARTLABEL="Swap" PARTUUID="c8be27d5-38ea-4d65-a9b6-779764416608"
	/dev/sda7: UUID="4aea8c24-3219-47de-b2f2-90e56dad595d" TYPE="ext4" PARTLABEL="Arch" PARTUUID="a2541d7b-a8c8-4a32-afc9-7031323be525"
	/dev/sda8: LABEL="M-PM-^]M-PM->M-PM-2M-QM-^KM-PM-9 M-QM-^BM-PM->M-PM-<" UUID="D278ACE078ACC517" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="c09ffa27-eadb-42a0-8662-271ba1ff4c51"
	/dev/sda9: LABEL="Data" UUID="24769EF6769EC7C6" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="a44bf304-23b3-4283-8974-b44a485834ec"
	/dev/sda10: LABEL="Restore" UUID="5C882AD8882AB086" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="989dde71-b662-48d6-ad1b-23a786ccb72c"
	#
	# /etc/fstab: static file system information
	#
	# <file system> <dir> <type> <options> <dump> <pass>

	# /dev/sda7
	UUID=4aea8c24-3219-47de-b2f2-90e56dad595d / ext4 rw,relatime,data=ordered 0 1

	# /dev/sda1 LABEL=SYSTEM
	UUID=5289-44BC /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2

	# /dev/sda6 SWAP
	/dev/sda6 swap swap defaults,noatime 0 0
	Resuming in non X mode: xrandr not found. For package install advice run: inxi --recommends
	System: Host: Asus Kernel: 4.4.14-1-lts x86_64 (64 bit) Desktop: KDE Plasma 5.6.5 Distro: Arch Linux
	Machine: System: ASUSTeK (portable) product: X555LD v: 1.0
	Mobo: ASUSTeK model: X555LD v: 1.0 Bios: American Megatrends v: X555LD.402 date: 10/29/2015
	Battery BAT0: charge: 27.9 Wh 86.1% condition: 32.4/37.3 Wh (87%)
	CPU: Dual core Intel Core i3-4030U (-HT-MCP-) cache: 3072 KB
	clock speeds: max: 1900 MHz 1: 1799 MHz 2: 1799 MHz 3: 1800 MHz 4: 1799 MHz
	Graphics: Card-1: Intel Haswell-ULT Integrated Graphics Controller
	Card-2: NVIDIA GF117M [GeForce 610M/710M/810M/820M / GT 620M/625M/630M/720M]
	Display Server: N/A driver: intel Resolution: 155x35
	Audio: Card-1 Intel 8 Series HD Audio Controller driver: snd_hda_intel Sound: ALSA v: k4.4.14-1-lts
	Card-2 Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel
	Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
	IF: enp2s0 state: down mac: 38:2c:4a:29:6b:b3
	Card-2: Broadcom BCM43142 802.11b/g/n driver: wl
	IF: wlp3s0 state: up mac: 30:10:b3:c0:98:22
	Drives: HDD Total Size: 500.1GB (2.7% used) ID-1: /dev/sda model: WDC_WD5000LPVX size: 500.1GB
	Partition: ID-1: / size: 14G used: 6.9G (54%) fs: ext4 dev: /dev/sda7
	ID-2: swap-1 size: 6.44GB used: 0.06GB (1%) fs: swap dev: /dev/sda6
	Sensors: System Temperatures: cpu: 45.0C mobo: N/A
	Fan Speeds (in rpm): cpu: 2800
	Info: Processes: 156 Uptime: 1:36 Memory: 1243.3/3840.4MB Init: systemd Client: Shell (bash) inxi: 2.3.0
	NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
	sda 8:0 0 465,8G 0 disk
	├─sda1 8:1 0 100M 0 part /boot/efi
	├─sda2 8:2 0 900M 0 part
	├─sda3 8:3 0 128M 0 part
	├─sda4 8:4 0 50G 0 part
	├─sda5 8:5 0 20G 0 part
	├─sda6 8:6 0 6G 0 part [SWAP]
	├─sda7 8:7 0 14G 0 part /
	├─sda8 8:8 0 80G 0 part
	├─sda9 8:9 0 274,7G 0 part
	└─sda10 8:10 0 20G 0 part
	sr0 11:0 1 1024M 0 rom
	[maxim@Asus ~]$ lsblk -f
	NAME FSTYPE LABEL UUID MOUNTPOINT
	sda
	├─sda1 vfat SYSTEM 5289-44BC /boot/efi
	├─sda2 ntfs Recovery 5EC02477C0245813
	├─sda3
	├─sda4 ntfs 6C72F2AD72F27B62
	├─sda5 ext4 c14d9dd7-f264-4c15-ac49-6aff83059e70
	├─sda6 swap d7741133-c24c-4e99-9633-018d30c5e334 [SWAP]
	├─sda7 ext4 4aea8c24-3219-47de-b2f2-90e56dad595d /
	├─sda8 ntfs Новый том D278ACE078ACC517
	├─sda9 ntfs Data 24769EF6769EC7C6
	└─sda10 ntfs Restore 5C882AD8882AB086
	sr0
	# vim:set ft=sh
	# MODULES
	# The following modules are loaded before any boot hooks are
	# run. Advanced users may wish to specify all system modules
	# in this array. For instance:
	# MODULES="piix ide_disk reiserfs"
	MODULES="i915" //без него тоже не работает

	# BINARIES
	# This setting includes any additional binaries a given user may
	# wish into the CPIO image. This is run last, so it may be used to
	# override the actual binaries included by a given hook
	# BINARIES are dependency parsed, so you may safely ignore libraries
	BINARIES=""

	# FILES
	# This setting is similar to BINARIES above, however, files are added
	# as-is and are not parsed in any way. This is useful for config files.
	FILES=""

	# HOOKS
	# This is the most important setting in this file. The HOOKS control the
	# modules and scripts added to the image, and what happens at boot time.
	# Order is important, and it is recommended that you do not change the
	# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
	# help on a given hook.
	# 'base' is _required_ unless you know precisely what you are doing.
	# 'udev' is _required_ in order to automatically load modules
	# 'filesystems' is _required_ unless you specify your fs modules in MODULES
	# Examples:
	## This setup specifies all modules in the MODULES setting above.
	## No raid, lvm2, or encrypted root is needed.
	# HOOKS="base"
	#
	## This setup will autodetect all modules for your system and should
	## work as a sane default
	# HOOKS="base udev autodetect block filesystems"
	#
	## This setup will generate a 'full' image which supports most systems.
	## No autodetection is done.
	# HOOKS="base udev block filesystems"
	#
	## This setup assembles a pata mdadm array with an encrypted root FS.
	## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
	# HOOKS="base udev block mdadm encrypt filesystems"
	#
	## This setup loads an lvm2 volume group on a usb device.
	# HOOKS="base udev block lvm2 filesystems"
	#
	## NOTE: If you have /usr on a separate partition, you MUST include the
	# usr, fsck and shutdown hooks.
	#HOOKS="base udev autodetect modconf block filesystems keyboard fsck"
	HOOKS="base udev autodetect modconf block filesystems keyboard resume fsck"

	# COMPRESSION
	# Use this to compress the initramfs image. By default, gzip compression
	# is used. Use 'cat' to create an uncompressed image.
	#COMPRESSION="gzip"
	#COMPRESSION="bzip2"
	#COMPRESSION="lzma"
	#COMPRESSION="xz"
	#COMPRESSION="lzop"
	#COMPRESSION="lz4"

	# COMPRESSION_OPTIONS
	# Additional options for the compressor
	#COMPRESSION_OPTIONS=""
	"Boot with standard options" "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d initrd=/boot/intel-ucode.img initrd=/boot/initramfs-linux-lts.img resume=/dev/sda6 fbcon=scrollback:1024k acpi_osi="
	"Boot to single-user mode" "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d single"
	"Boot with minimal options" "ro root=UUID=4aea8c24-3219-47de-b2f2-90e56dad595d"
	$pacman -Qqe \| grep -v "$(pacman -Qqg base base-devel)"
	ark
	broadcom-wl-dkms
	dolphin
	dolphin-plugins
	gimp
	intel-ucode
	inxi
	iw
	kate
	kcalc
	kde-l10n-ru
	konsole
	linux-lts
	linux-lts-headers
	ntfs-3g
	p7zip
	partitionmanager
	plasma-meta
	polkit
	qbittorrent
	refind-efi
	rfkill
	smplayer
	smplayer-themes
	ttf-liberation
	unrar
	unzip
	wget
	wpa_actiond
	wpa_supplicant
	xorg-server
	yakuake
	yandex-browser-beta