hal test

gistfile1.txt

// Начало библиотеки
// *****************
#ifndef ILI932X_CONF_H
#define ILI932X_CONF_H 120
//#include "stm32f1xx_hal.h" 
//#include "hardware_conf.h"
#ifdef __cplusplus
extern "C" {
#endif
#include "stm32f1xx_hal.h"

// Ошибки компиляции
// *****************
compiling ILI932x.c...
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(133): warning:  #47-D: incompatible redefinition of macro "HSE_STARTUP_TIMEOUT"  (declared at line 105 of "../Inc/stm32f1xx_hal_conf.h")
  #define HSE_STARTUP_TIMEOUT   ((uint16_t)0x0500) /*!< Time out for HSE start up */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(163): warning:  #47-D: incompatible redefinition of macro "__MPU_PRESENT"  (declared at line 69 of "../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h")
   #define __MPU_PRESENT             0 /*!< Other STM32 devices does not provide an MPU */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(165): warning:  #47-D: incompatible redefinition of macro "__NVIC_PRIO_BITS"  (declared at line 70 of "../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h")
  #define __NVIC_PRIO_BITS          4 /*!< STM32 uses 4 Bits for the Priority Levels    */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(166): warning:  #47-D: incompatible redefinition of macro "__Vendor_SysTickConfig"  (declared at line 71 of "../Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h")
  #define __Vendor_SysTickConfig    0 /*!< Set to 1 if different SysTick Config is used */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(175): error:  #101: "NonMaskableInt_IRQn" has already been declared in the current scope
    NonMaskableInt_IRQn         = -14,    /*!< 2 Non Maskable Interrupt                             */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(176): error:  #101: "MemoryManagement_IRQn" has already been declared in the current scope
    MemoryManagement_IRQn       = -12,    /*!< 4 Cortex-M3 Memory Management Interrupt              */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(177): error:  #101: "BusFault_IRQn" has already been declared in the current scope
    BusFault_IRQn               = -11,    /*!< 5 Cortex-M3 Bus Fault Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(178): error:  #101: "UsageFault_IRQn" has already been declared in the current scope
    UsageFault_IRQn             = -10,    /*!< 6 Cortex-M3 Usage Fault Interrupt                    */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(179): error:  #101: "SVCall_IRQn" has already been declared in the current scope
    SVCall_IRQn                 = -5,     /*!< 11 Cortex-M3 SV Call Interrupt                       */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(180): error:  #101: "DebugMonitor_IRQn" has already been declared in the current scope
    DebugMonitor_IRQn           = -4,     /*!< 12 Cortex-M3 Debug Monitor Interrupt                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(181): error:  #101: "PendSV_IRQn" has already been declared in the current scope
    PendSV_IRQn                 = -2,     /*!< 14 Cortex-M3 Pend SV Interrupt                       */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(182): error:  #101: "SysTick_IRQn" has already been declared in the current scope
    SysTick_IRQn                = -1,     /*!< 15 Cortex-M3 System Tick Interrupt                   */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(185): error:  #101: "WWDG_IRQn" has already been declared in the current scope
    WWDG_IRQn                   = 0,      /*!< Window WatchDog Interrupt                            */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(186): error:  #101: "PVD_IRQn" has already been declared in the current scope
    PVD_IRQn                    = 1,      /*!< PVD through EXTI Line detection Interrupt            */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(187): error:  #101: "TAMPER_IRQn" has already been declared in the current scope
    TAMPER_IRQn                 = 2,      /*!< Tamper Interrupt                                     */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(188): error:  #101: "RTC_IRQn" has already been declared in the current scope
    RTC_IRQn                    = 3,      /*!< RTC global Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(189): error:  #101: "FLASH_IRQn" has already been declared in the current scope
    FLASH_IRQn                  = 4,      /*!< FLASH global Interrupt                               */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(190): error:  #101: "RCC_IRQn" has already been declared in the current scope
    RCC_IRQn                    = 5,      /*!< RCC global Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(191): error:  #101: "EXTI0_IRQn" has already been declared in the current scope
    EXTI0_IRQn                  = 6,      /*!< EXTI Line0 Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(192): error:  #101: "EXTI1_IRQn" has already been declared in the current scope
    EXTI1_IRQn                  = 7,      /*!< EXTI Line1 Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(193): error:  #101: "EXTI2_IRQn" has already been declared in the current scope
    EXTI2_IRQn                  = 8,      /*!< EXTI Line2 Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(194): error:  #101: "EXTI3_IRQn" has already been declared in the current scope
    EXTI3_IRQn                  = 9,      /*!< EXTI Line3 Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(195): error:  #101: "EXTI4_IRQn" has already been declared in the current scope
    EXTI4_IRQn                  = 10,     /*!< EXTI Line4 Interrupt                                 */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(196): error:  #101: "DMA1_Channel1_IRQn" has already been declared in the current scope
    DMA1_Channel1_IRQn          = 11,     /*!< DMA1 Channel 1 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(197): error:  #101: "DMA1_Channel2_IRQn" has already been declared in the current scope
    DMA1_Channel2_IRQn          = 12,     /*!< DMA1 Channel 2 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(198): error:  #101: "DMA1_Channel3_IRQn" has already been declared in the current scope
    DMA1_Channel3_IRQn          = 13,     /*!< DMA1 Channel 3 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(199): error:  #101: "DMA1_Channel4_IRQn" has already been declared in the current scope
    DMA1_Channel4_IRQn          = 14,     /*!< DMA1 Channel 4 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(200): error:  #101: "DMA1_Channel5_IRQn" has already been declared in the current scope
    DMA1_Channel5_IRQn          = 15,     /*!< DMA1 Channel 5 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(201): error:  #101: "DMA1_Channel6_IRQn" has already been declared in the current scope
    DMA1_Channel6_IRQn          = 16,     /*!< DMA1 Channel 6 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(202): error:  #101: "DMA1_Channel7_IRQn" has already been declared in the current scope
    DMA1_Channel7_IRQn          = 17,     /*!< DMA1 Channel 7 global Interrupt                      */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(249): error:  #101: "ADC1_2_IRQn" has already been declared in the current scope
    ADC1_2_IRQn                 = 18,     /*!< ADC1 and ADC2 global Interrupt                       */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(250): error:  #101: "USB_HP_CAN1_TX_IRQn" has already been declared in the current scope
    USB_HP_CAN1_TX_IRQn         = 19,     /*!< USB Device High Priority or CAN1 TX Interrupts       */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(251): error:  #101: "USB_LP_CAN1_RX0_IRQn" has already been declared in the current scope
    USB_LP_CAN1_RX0_IRQn        = 20,     /*!< USB Device Low Priority or CAN1 RX0 Interrupts       */
D:\develop\Keil_5.24\ARM\PACK\Keil\STM32F1xx_DFP\2.2.0\Device\Include\stm32f10x.h(252): error:  #101: "CAN1_RX1_IRQn" has already been declared in the current scope
    CAN1_RX1_IRQn               = 21,     /*!< CAN1 RX1 Interrupt                                   */
..\..\lib\ili9328_8bit_hal\ILI932x.c: 4 warnings, 30 errors