gistfile1.txt

U-Boot 1.1.4-gd995931a-dirty (Aug  7 2013 - 16:16:04)

Arduino Yun (ar9331) U-boot

DRAM:  64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 142k for U-Boot at: 83fdc000
Reserving 192k for malloc() at: 83fac000
Reserving 44 Bytes for Board Info at: 83fabfd4
Reserving 36 Bytes for Global Data at: 83fabfb0
Reserving 18k or bot parms() t: 8f8bf0
Stck Pinterat:83f8b98
Now running in RAM - U-Boot at: 83fdc000
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 16777216, sector count= 25
Flsh: 6 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Hit any key to stop autoboot:  4  3  2  1  0 
## Booting image at 9fea0000 ...
   Image Name:   MIPS OpenWrt Linux-3.3.8
   Created:      2014-05-17  15:39:15 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    1185362 Bytes =  1.1 MB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum at 0x9fea0040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 67108864

Starting kernel ...

[    0.000000] Linux version 3.3.8 (jenkins@jenkins) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #1 Sat May 17 17:36:39 CEST 2014
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
    000000] Clcks:CPU:40.000Hz, DR:40.000Hz, AB:200000Mz, Rf:25.00MHz
[   0.00000]Deterined hyscal RM map
[   0.00000  meory: 400000 @ 000000 (uable)
[    0.000000] Initrd not found or emty - isablng iitrd
[   0.00000] one FN rages:
[    .00000]  Norml   00000000 > 0x000400
[   0.0000] Movble zne sart PN fo eachnode
[   0.00000] arly emor PFN ange
[   0.00000]    0 0x000000 -> x0004000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
[    0.000000] Kernel command line:  board=Yun console=ttyATH0,250000 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware) rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID ash able ntrie: 256(orer: -, 102 byte)
[   000000] Detry cchehash able ntrie: 819 (oder: , 3278 byts)
    .00000] Inde-cahe ash tble etries 409 (orer: 2 1638 byts)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=000000
[   0.00000]Readack ErCtlregiser=000000
[    0.000000] Memory: 60936k/65536k available (2565k kernel code, 4600k reserved, 650k data, 180k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.080000] NET: Registered protocol family 16
[    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[    0.090000] MIPS: machine is Arduino Yun
[    0.530000] Setting DogStick2 GPIO
[    0.550000] bio: create slab <bio-0> at 0
[    0.550000] SCSI subsystem initialized
[    0.560000] usbcore: registered new interface driver usbfs
[    0.560000] usbcore: registered new interface driver hub
[    0.560000] usbcore: registered new device driver usb
[    0.570000] Switching to clocksource MIPS
[    0.570000] NET: Registered protocol family 2
[    0.570000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.580000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.580000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
[    0.580000] TCP: Hash tables configured (established 208 bid 208)
[   0.8000] TCPrenoregisered
[   0.58000] DP hah tale enries 256 orde: 0, 096 ytes
[   0.59000]UDP-ite hsh tale etrie: 256(orde: 0, 096 ytes
[   0.59000] ET:Regisered rotocl faily 
[    0.610000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.610000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.620000] msgmni has been set to 119
[    0.620000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.620000] io scheduler noop registered
[    0.630000] io scheduler deadline registered (default)
[    0.630000] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.640000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) i{ a AR933X UART
[    0.640000] console [ttyATH0] enabled, bootconsole disabled
[    0.640000] console [ttyATH0] enabled, bootconsole disabled
[    0.650000] m25p80 spi0.0: found w25q128, expected m25p80
[    0.650000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[    0.650000] 7 cmdlinepart partitions found on MTD device spi0.0
[    0.660000] Creating 7 MTD partitions on "spi0.0":
[    0.660000] 0x000000000000-0x000000040000 : "u-boot"
[    0.660000] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.670000] 0x000000050000-0x000000ea0000 : "rootfs"
[    0.670000] mtd: partition "rootfs" set to be root filesystem
[    0.670000] mtd: partition "rootfs_data" created automatically, ofs=7A0000, len=700000 
[    0.680000] 0x0000007a0000-0x000000ea0000 : "rootfs_data"
[    0.680000] 0x000000ea0000-0x000000fe0000 : "kernel"
[    0.680000] 0x000000fe0000-0x000000ff0000 : "nvram"
[    0.690000] 0x000000ff0000-0x000001000000 : "art"
[    0.690000] 0x000000050000-0x000000fe0000 : "firmware"
[    0.710000] ag71xx_mdio: probed
[    0.720000] eth0: Atheros AG71xx at 0xba000000, irq 5
[    1.270000] eth0: Found an AR7240/AR9330 built-in switch
[    2.300000] eth1: Atheros AG71xx at 0xb9000000, irq 4
[    2.850000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.850000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.850000] ehci-platform ehci-platform: Generic Platform EHCI Controller
[    2.860000] ehci-platform ehci-platform: new USB bus registered, assignedbus umbe 1
[    2.890000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[    2.910000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[    2.910000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.910000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.910000] usb usb1: Product: Generic Platform EHCI Controller
[    2.920000] usb usb1: Manufacturer Linx 3.38 ehi_hcd
[   2.92000] sb ub1: Srialumber ehciplatorm
[    2.920000] hub 1-0:1.0: USB hub found
[    2.920000] hub 1-0:1.0: 1 ort etectd
[   2.30000 Iniialiing UB Mas Storge dive...
    293000] ubcore regiterednew nterace diver sb-strag
[   2.93000] SB Mss Soragesuppot regsteed.
[    2.93000] npu: gpi-keyspolle as devies/pltformgpio-eyspolle/inpt/inpt0
[    2.940000] sdhci: Secure Digital Host Controller Interface driver
[    2.94000] dhci Copyight() Piere ssman
[   2.94000] sbcoe: reisteed ne intrfac drivr ush
[   2.40000 TCP ubic egisered
[   2.95000] NT: Rgistred potoco famly 1
[   2.95000] ridg firwallig reisteed
[   295000] 802q: 82.1QVLAN uppor v1.
[    2.960000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.960000] Freeing unused kernel memory: 180k freed
[    3.250000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.440000] usb 1-1: New USB device found, idVendor=058f, idProduct=6254
[    3.440000] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.440000] usb 1-1: Product: USB2.0Hub
[    3.580000] hub 1-1:1.0: USB hub found
[    3.580000] hub 1-1:1.0: 4 ports detected
[    3.980000] usb 1-1.4: new high-speed USB device number 3 using ehci-platform
[    4.110000] usb 1-1.4: New USB device found, idVendor=058f, idProduct=6366
[    4.110000] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.120000] usb 1-1.4: Product: Mass Storage Device
[    4.120000] usb 1-1.4: Manufacturer: Generic
[    4.120000] usb 1-1.4: SerialNumber: 058F0O1111B1
[    4.200000] scsi0 : usb-storage 1-1.4:1.0
[    5.000000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[    5.200000] scsi 0:0:0:0: Direct-Access     Multi    Flash Reader     1.00 PQ: 0 ANSI: 0
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
[    9.540000] JFFS2 notice: (526) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 13 of xref (0 dead, 2 orphan) found.
[   11.730000] sd 0:0:0:0: [sda] 3960832 512-byte logical blocks: (2.02 GB/1.88 GiB)
[   11.730000] sd 0:0:0:0: [sda] Write Protect is off
[   11.730000] sd 0:0:0:0: [sda] No Caching mode page present
[   11.730000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   11.740000] sd 0:0:0:0: [sda] No Caching mode page present
[   11.740000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   11.750000]  sda: sda1
[   11.750000] sd 0:0:0:0: [sda] No Caching mode page present
[   11.750000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   11.760000] sd 0:0:0:0: [sda] Attached SCSI removable disk
switching to jffs2
- init -

Please press Enter to activate this console. [   39.160000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
[   39.160000] Backport generated by backports.git backports-20140124-0-g1256d3e
[   39.200000] cfg80211: Calling CRDA to update world regulatory domain
[   39.200000] cfg80211: World regulatory domain updated:
[   39.200000] cfg80211:  DFS Master region: unset
[   39.200000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   39.210000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000KHz),(300mBi, 000 Bm)
   3921000] cf8021:   (45700 KHz- 242000 Hz @ 0000KHz),(300mBi, 000 mm)
   3.22000] cg8021:   247400 KH - 244000KHz  2000 KHz) (300mBi,2000mBm)
[   3.22000] fg8021:   517000 KH - 550000KHz @80000KHz, (30 mBi 2000mBm)
[  39.22000] fg8021:  (573000 Kz - 535000KHz@ 8000 KHz, (30 mBi 200 mBm)
[   9.23000]cfg8011:  (5720000 Hz  6372000 Kz @ 26000 KHz, (N/, 0 mm)
[   40.190000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   40.190000] cfg80211: Calling CRDA for country: US
[   40.200000] cfg80211: Regulatory domain changed to country: US
[   40.200000] cfg80211:  DFS Master region: FCC
[   40.200000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   40.200000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 Bi, 200 mB)
[  4021000] cfg0211:  (51000 KHz  525000 KH @ 0000 Hz), 300 Bi, 100 Bm)
   4021000] cf8021:   (25000 KHz  530000 Hz @ 0000 Hz),(300mBi, 400 mm)
[  4022000] cf80211   549000 KH - 560000 Hz @8000 KHz) (300mBi,2400 Bm)
[   4.22000] cg8021:   565000 KH - 570000KHz @40000KHz) (30 mBi,2400 Bm)
[   0.22000] fg8021:  (573500 Kz - 535000KHz  8000 KHz, (30 mBi 3000mBm)
[   0.23000] fg8011:  (5724000 Hz -6372000 KH @ 26000 KHz) (N/, 400 mBm
[   40.640000] NTFS driver 2.1.30 [Flags: R/O MODULE].
[   40.680000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
[   40.810000] PPP generic driver version 2.4.2
[   40.860000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   40.980000] NET: Registered protocol family 24
[   41.020000] nf_conntrack version 0.5.0 (954 buckets, 3816 max)
[   41.450000] i2c /dev entries driver
[   41.490000] Linux video capture interface: v2.00
[   41.610000] fuse init (API version 7.18)
[   51.200000] cfg80211: Calling CRDA for country: NZ
[   51.200000] cfg80211: Regulatory domain changed to country: NZ
[   51.200000] cfg80211:  DFS Master region: unset
[   51.200000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   51.210000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/, 300 mBm
[  51.20000]cfg8211:  (510000 Hz -525000 KH @ 8000 KH), (00 mB, 170 mBm
[  51.20000 cfg8211:  (550000KHz -533000 KH @ 8000 Hz), 300 mi, 200 mB)
[  51.20000 cfg0211:  (590000KHz  571000 Kz @ 8000 Kz), 300 Bi, 200 mB)
   5122000] cf80211   (73500 KHz- 583000 Hz @ 0000 Hz),(300 Bi, 000 mm)
[   52.400000] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (244)
[   52.450000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[   52.490000] EXT4-fs (sda1): recovery complete
[   52.490000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   55.080000] wlan0: authenticate with 90:72:40:0d:cf:7c
[   55.080000] wlan0: send auth to 90:72:40:0d:cf:7c (try 1/3)
[   55.090000] wlan0: authenticated
[   55.220000] wlan0: associate with 90:72:40:0d:cf:7c (try 1/3)
[   55.230000] wlan0: RX AssocResp from 90:72:40:0d:cf:7c (capab=0x1411 status=0 aid=1)
[   55.240000] wlan0: associated
[   55.300000] wlan0: Limiting TX power to 20 (20 - 0) dBm as advertised by 90:72:40:0d:cf:7c