Created
October 21, 2016 22:07
-
-
Save anonymous/f20f1e202f7a634769ac2dd22d604aa6 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
root@xen:~# dmesg | grep sd | |
[ 1.159018] sd 2:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB) | |
[ 1.159090] sd 2:0:0:0: Attached scsi generic sg1 type 0 | |
[ 1.159342] sd 2:0:0:0: [sda] Write Protect is off | |
[ 1.159417] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
[ 1.159464] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 1.160689] sda: sda1 sda2 < sda5 sda6 sda7 > | |
[ 1.161553] sd 2:0:0:0: [sda] Attached SCSI disk | |
[ 2.705605] sd 4:0:0:0: [sdb] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.705721] sd 4:0:0:0: Attached scsi generic sg2 type 0 | |
[ 2.706025] sd 4:0:1:0: [sdc] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.706041] sd 4:0:1:0: [sdc] Write Protect is off | |
[ 2.706048] sd 4:0:1:0: [sdc] Mode Sense: 12 00 10 08 | |
[ 2.706100] sd 4:0:1:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.706103] sd 4:0:1:0: Attached scsi generic sg3 type 0 | |
[ 2.706427] sd 4:0:2:0: [sdd] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.706444] sd 4:0:2:0: [sdd] Write Protect is off | |
[ 2.706447] sd 4:0:2:0: [sdd] Mode Sense: 12 00 10 08 | |
[ 2.706477] sd 4:0:2:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.706956] sd 4:0:2:0: Attached scsi generic sg4 type 0 | |
[ 2.707232] sd 4:0:3:0: [sde] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.707246] sd 4:0:3:0: [sde] Write Protect is off | |
[ 2.707248] sd 4:0:3:0: [sde] Mode Sense: 12 00 10 08 | |
[ 2.707277] sd 4:0:3:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.707520] sd 4:0:3:0: Attached scsi generic sg5 type 0 | |
[ 2.707856] sd 4:0:4:0: [sdf] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.707871] sd 4:0:4:0: [sdf] Write Protect is off | |
[ 2.707874] sd 4:0:4:0: [sdf] Mode Sense: 12 00 10 08 | |
[ 2.707904] sd 4:0:4:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.708295] sd 4:0:4:0: Attached scsi generic sg6 type 0 | |
[ 2.708586] sd 4:0:6:0: [sdg] 286494720 512-byte logical blocks: (147 GB/137 GiB) | |
[ 2.708598] sd 4:0:6:0: [sdg] Write Protect is off | |
[ 2.708601] sd 4:0:6:0: [sdg] Mode Sense: 12 00 10 08 | |
[ 2.708629] sd 4:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.708755] sd 4:0:6:0: Attached scsi generic sg7 type 0 | |
[ 2.710554] sdd: sdd1 | |
[ 2.710942] sd 4:0:2:0: [sdd] Attached SCSI removable disk | |
[ 2.712136] sdc: sdc1 | |
[ 2.712263] sdf: sdf1 | |
[ 2.712411] sd 4:0:1:0: [sdc] Attached SCSI removable disk | |
[ 2.712611] sd 4:0:4:0: [sdf] Attached SCSI removable disk | |
[ 2.713847] sdg: sdg1 | |
[ 2.714107] sd 4:0:6:0: [sdg] Attached SCSI removable disk | |
[ 2.714472] sde: sde1 | |
[ 2.714698] sd 4:0:3:0: [sde] Attached SCSI removable disk | |
[ 2.894777] sd 4:0:0:0: [sdb] Write Protect is off | |
[ 2.900114] sd 4:0:0:0: [sdb] Mode Sense: 12 00 10 08 | |
[ 2.900388] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA | |
[ 2.910673] sdb: sdb1 | |
[ 2.916417] sd 4:0:0:0: [sdb] Attached SCSI removable disk | |
[ 3.119294] md: bind<sdc1> | |
[ 3.145889] md: bind<sdd1> | |
[ 3.171172] md: bind<sdf1> | |
[ 3.204718] md: bind<sdg1> | |
[ 3.229738] md: bind<sdb1> | |
[ 3.257160] md: bind<sde1> | |
[ 3.306617] disk 0, wo:0, o:1, dev:sdb1 | |
[ 3.306619] disk 1, wo:0, o:1, dev:sdc1 | |
[ 3.306621] disk 2, wo:0, o:1, dev:sdd1 | |
[ 3.306624] disk 3, wo:0, o:1, dev:sde1 | |
[ 3.306629] disk 0, wo:0, o:1, dev:sdb1 | |
[ 3.306631] disk 1, wo:0, o:1, dev:sdc1 | |
[ 3.306634] disk 2, wo:0, o:1, dev:sdd1 | |
[ 3.306636] disk 3, wo:0, o:1, dev:sde1 | |
[ 4.464342] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) | |
[ 5.702633] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro | |
[ 6.378636] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) | |
[ 6.396446] Adding 3927036k swap on /dev/sda7. Priority:-1 extents:1 across:3927036k SSFS | |
[ 6.482829] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) | |
[ 638.829402] sd 5:0:0:0: Attached scsi generic sg16 type 0 | |
[ 638.829856] sd 5:0:0:0: [sdh] 1073741824 512-byte logical blocks: (550 GB/512 GiB) | |
[ 638.829862] sd 5:0:0:0: [sdh] 16384-byte physical blocks | |
[ 638.831294] sd 5:0:0:0: [sdh] Write Protect is off | |
[ 638.831298] sd 5:0:0:0: [sdh] Mode Sense: 73 00 10 08 | |
[ 638.831693] sd 5:0:0:0: [sdh] Write cache: enabled, read cache: enabled, supports DPO and FUA | |
[ 638.835660] sdh: sdh1 | |
[ 638.840685] sd 5:0:0:0: [sdh] Attached SCSI disk | |
[ 654.732158] sdh: sdh1 | |
[ 749.791653] sdh: sdh1 | |
[ 749.798131] sdh: sdh1 | |
[ 1111.236160] sdh: sdh1 | |
[ 1111.241353] sdh: sdh1 | |
[ 1279.837996] sdh: sdh1 | |
[ 1281.036163] sdh: sdh1 | |
[ 1281.117240] sdh: sdh1 | |
[ 1287.281140] sdh: sdh1 | |
[ 1288.450882] sdh: sdh1 | |
[ 1288.457658] sdh: sdh1 | |
[ 1288.568223] sdh: sdh1 | |
[ 1361.643187] sdh: sdh1 | |
[ 1362.864475] sdh: sdh1 | |
[ 1362.977585] sdh: sdh1 | |
[ 2709.691007] sdh: sdh1 | |
root@xen:~# | |
root@xen:~# fdisk /dev/sdh | |
Welcome to fdisk (util-linux 2.27.1). | |
Changes will remain in memory only, until you decide to write them. | |
Be careful before using the write command. | |
Command (m for help): p | |
Disk /dev/sdh: 512 GiB, 549755813888 bytes, 1073741824 sectors | |
Units: sectors of 1 * 512 = 512 bytes | |
Sector size (logical/physical): 512 bytes / 16384 bytes | |
I/O size (minimum/optimal): 16384 bytes / 1048576 bytes | |
Disklabel type: dos | |
Disk identifier: 0x5eb7447a | |
Device Boot Start End Sectors Size Id Type | |
/dev/sdh1 2048 536872959 536870912 256G 8e Linux LVM | |
Command (m for help): q | |
root@xen:~# ls -1 /dev/sd* | |
/dev/sda | |
/dev/sda1 | |
/dev/sda2 | |
/dev/sda5 | |
/dev/sda6 | |
/dev/sda7 | |
/dev/sdb | |
/dev/sdb1 | |
/dev/sdc | |
/dev/sdc1 | |
/dev/sdd | |
/dev/sdd1 | |
/dev/sde | |
/dev/sde1 | |
/dev/sdf | |
/dev/sdf1 | |
/dev/sdg | |
/dev/sdg1 | |
/dev/sdh | |
root@xen:~# | |
# | |
# SYSLOG | |
# | |
Oct 21 23:30:21 xen kernel: [ 1362.864475] sdh: sdh1 | |
Oct 21 23:30:21 xen systemd-udevd[4182]: Process '/usr/bin/partx -d --nr 1-1024 /dev/sdh' failed with exit code 1. | |
Oct 21 23:30:21 xen systemd-udevd[4179]: inotify_add_watch(9, /dev/sdh1, 10) failed: No such file or directory | |
Oct 21 23:30:21 xen systemd-udevd[4179]: Process '/usr/bin/partx -d --nr 1-1024 /dev/sdh' failed with exit code 1. | |
Oct 21 23:30:21 xen systemd-udevd[4179]: inotify_add_watch(9, /dev/sdh1, 10) failed: No such file or directory | |
Oct 21 23:30:21 xen kernel: [ 1362.977585] sdh: sdh1 | |
Oct 21 23:30:21 xen systemd-udevd[4201]: Process '/usr/bin/partx -d --nr 1-1024 /dev/sdh' failed with exit code 1. | |
Oct 21 23:30:21 xen systemd-udevd[4201]: inotify_add_watch(9, /dev/sdh1, 10) failed: No such file or directory | |
Oct 21 23:33:27 xen systemd[1]: Stopping User Manager for UID 0... | |
Oct 21 23:33:27 xen systemd[2721]: Stopped target Default. | |
Oct 21 23:33:27 xen systemd[2721]: Stopped target Basic System. | |
Oct 21 23:33:27 xen systemd[2721]: Stopped target Sockets. | |
Oct 21 23:33:27 xen systemd[2721]: Stopped target Paths. | |
Oct 21 23:33:27 xen systemd[2721]: Reached target Shutdown. | |
Oct 21 23:33:27 xen systemd[2721]: Starting Exit the Session... | |
Oct 21 23:33:27 xen systemd[2721]: Stopped target Timers. | |
Oct 21 23:33:27 xen systemd[2721]: Received SIGRTMIN+24 from PID 4222 (kill). | |
Oct 21 23:33:27 xen systemd[1]: Stopped User Manager for UID 0. | |
Oct 21 23:33:27 xen systemd[1]: Removed slice User Slice of root. | |
Oct 21 23:34:47 xen systemd[1]: Created slice User Slice of root. | |
Oct 21 23:34:47 xen systemd[1]: Starting User Manager for UID 0... | |
Oct 21 23:34:47 xen systemd[1]: Started Session 3 of user root. | |
Oct 21 23:34:47 xen systemd[4233]: Reached target Timers. | |
Oct 21 23:34:47 xen systemd[4233]: Reached target Sockets. | |
Oct 21 23:34:47 xen systemd[4233]: Reached target Paths. | |
Oct 21 23:34:47 xen systemd[4233]: Reached target Basic System. | |
Oct 21 23:34:47 xen systemd[4233]: Reached target Default. | |
Oct 21 23:34:47 xen systemd[4233]: Startup finished in 46ms. | |
Oct 21 23:34:47 xen systemd[1]: Started User Manager for UID 0. | |
Oct 21 23:52:48 xen kernel: [ 2709.691007] sdh: sdh1 | |
Oct 21 23:52:48 xen systemd-udevd[4293]: Process '/usr/bin/partx -d --nr 1-1024 /dev/sdh' failed with exit code 1. | |
Oct 21 23:52:48 xen systemd-udevd[4293]: inotify_add_watch(9, /dev/sdh1, 10) failed: No such file or directory | |
Oct 22 00:04:23 xen systemd[1]: Started Session 4 of user root. | |
Oct 22 00:05:02 xen kernel: [ 3443.924704] sdh: sdh1 | |
Oct 22 00:05:02 xen systemd-udevd[4355]: Process '/usr/bin/partx -d --nr 1-1024 /dev/sdh' failed with exit code 1. | |
Oct 22 00:05:02 xen systemd-udevd[4355]: inotify_add_watch(9, /dev/sdh1, 10) failed: No such file or directory |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment