———————————————————
>>>СКАЧАТЬ<<<
———————————————————
Download link
———————————————————
Мануал general climate
Do not expose the skin directly to cool air for long There is risk of physical injury, electric shock, or product failure. However, excludes the initial pull-down stage. Room temperature control Maintain the room temperature in accordance with the setting temperature. Connect the charge hose which you disconnected from the vacuum pump to the valve at the bottom of the cylinder. Be sure to use a hexagonal wrench to operate the valve stems. That is automatically entering to the status when power is on. Timer indicator: The indicator illuminates then TIMER is set ON. Grade Unit Pipe length and the elevation Standard Max. Purge the air from the charge hose. Мануал general climate the charge hose to the charging cylinder. Leave the valve on the charge set closed. To print the manual completely, please, it.
Do not expose the skin directly to cool air for long There is risk of physical injury, electric shock, or product failure. Note: The chart is the result from the continuous operation under constant air temperature conditions. Note: The chart is the result from the continuous operation under constant air temperature conditions. Grade Unit Pipe length and the elevation Standard Max. Confirm that the gauge needle has moved toward -0. Compressor and outdoor fan on EVAP.
Confirm that the gauge needle has moved toward -0. Note: The air in the indoor unit and in the piping must be purged. Low ambient kit The unit can operate in cooling mode at low ambient temperature conditions. Incorrect operation due to ignoring instruction will cause harm or damage. Grade Unit Pipe length and the elevation Standard Max. Outdoor unit air temp. Note: The chart is the result from the continuous operation under constant air temperature conditions. Confirm that both the 2-way and 3-way valves are set to the closed position.
Мануал general climate
Confirm that both the 2-way and 3-way valves are set to the open position. Connect the charge hose to the charging cylinder. Leave the valve on the charging cylinder closed. Purge the air from the charge hose. Do not touch the electrostatic filter, if the Operational unit is so equipped. Do not sit in the draft.
Check according to the following procedure: 12. Incorrect operation due to ignoring instruction will cause harm or damage. Characteristic of temperature sensor Temp.