———————————————————
>>>СКАЧАТЬ<<<
———————————————————
Download link
———————————————————
Сервис мануал hp lj 1320
Cross-section of printer Figure 5-2. Disconnect three cables callout 7. Removing the fuser 4 of 10 Chapter 6 Removal and replacement ENWW. Examine the cable routing as you unthread the cables. Operation is subject to the following two Conditions: 1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. ENWW Changing the printer separation pad. Disconnect three cables callout 2. In the USB Printer Selection section of the dialog box, click Change. Input trays To clear a jam in the input trays, perform the following steps: Do not use sharp objects, such as tweezers or needlenose pliers, to remove jams. For best results use a sheet of transparency.
Pull the tab on the cable holder callout 6 at the right side of the printer and slide it toward the center to release it from the frame, and then unroute the cables. Cover the print cartridge if CAUTION necessary. Solving print image-quality problems continued Parts of the page around the edges are not printing. Feature designations for HP LaserJet 1320 Series printers. Internal components 4 of 4.
Do not touch the contacts on the end of any of the sockets on the printer. Alphabetical parts list Description Part number Table and page Bushing RC1-3665-000CN Table 8-5 on page 209 Bushing, left RB2-2896-000CN Table 8-5 on page 209 Bushing, right RB2-2895-000CN Table 8-5 on page 209 Cam arm RC1-3544-000CN Table 8-6 on page 211 Control panel assembly HPLJ 1160 RM1-1311-000CN. Remove all covers see Covers. Remove all covers see Covers. You must have performed a complete software installation to use the HP Toolbox. Close the single-sheet priority input slot tray 1 door. Removing the fuser 2 of 10. Chapter 4 Maintenance ENWW.
Сервис мануал hp lj 1320
Slide the pickup roller assembly to the right, and remove the left end cap. Operation is subject to the following two Conditions: 1 this device may not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation. Disconnect two cables callout 3.
Removing the memory-tag-reader assembly 2 of 2 Figure 6-16. Do not use ammonia-based cleaners on or around the printer.