LUNA-88K2 diag mode (set DIPSW1-8:on then power on) log

LUNA-88K2-diag-mode.log

PIO set Start    End
LUNA 88K2 SELF DIAGONOSIS TEST Ver 1.2
 1. MULTI CPU Test.
    3 Port Memory clear Start    End
    Main memory size check (Memory : 07000000 Hex byte)

        LCD Display Check.
                Main Memory Clear ( 3f0000H )
        CMMU set Start     End
    CPU 0 OK      CPU 2 OK      CPU 1 OK
    CPU 1 START
 This Borad Version Name is MNAME=LUNA88K+
        Internal SCSI Device Check
                ID No.4 ---- TEAC    MT-2ST/N50      RV T
                ID No.6 ----    No Device !!
        External SCSI Device Check
                ID No.6 ----    No Device !!
        LANCE Board ON
CRTC-II Initialize Start    End
        BM Board ON Plane 5
 Update Mon Jan 18 15:13:17 1993
        *****************************************
        *       Manual Test Menu                *
        *****************************************
        *                                       *
        *       1 :     3 Port Memory   Test    *
        *       2 :     Interrupt       Test    *
        *       3 :     SCSI            Test    *
        *       4 :     Calender        Test    *
        *       5 :     PIO             Test    *
        *       6 :     2 Port LAN      Test    *
        *       7 :     CACHE           Test    *
        *       8 :     Semi CACHE      Test    *
        *       9 :     NVRAM           Test    *
        *       A :     Switch          Test    *
        *       B :     BM              Test    *
        *       C :     PC I/F Board    Test    *
        *       Q :     E N D                   *
        *                                       *
        *****************************************
        Key In : 1
 4. 3 Port RAM Memory  Test.
        Data    Test                    OK
        Address Test                    OK
        Key In : 2
 5. Interrupt   Test.
        *****************************************
        *       Interrupt Test Menu             *
        *****************************************
        *                                       *
        *       1 : Interrupt Mask       Test   *
        *       2 : SOFT Interrupt       Test   *
        *       3 : Abort SW             Test   *
        *       4 : Multi CPU Interrupt  Test   *
        *       5 : INT 2 & INT 5        Test   *
        *       6 : SYSTEM Clock         Test   *
        *       7 : Sirial Interrrupt    Test   *
        *       Q :     E N D                   *
        *                                       *
        *****************************************
        Key In : 1
        Interrupt Mask Register Test    OK
        Key In : 2
        SOFT Interrupt Test             OK
        Key In : 3
        Abort SW                        OK
        Key In : 4
        MULTI CPU Interrupt Test        OK
        Key In : 5
        INT 2 & INT 5 Test              OK
        Key In : 6
        SYSTEM CLOCK Interrupt Test     OK
        Key In : 7
        Sirial Interrupt Test           OK
        Key In : Q
        *****************************************
        *       Manual Test Menu                *
        *****************************************
        *                                       *
        *       1 :     3 Port Memory   Test    *
        *       2 :     Interrupt       Test    *
        *       3 :     SCSI            Test    *
        *       4 :     Calender        Test    *
        *       5 :     PIO             Test    *
        *       6 :     2 Port LAN      Test    *
        *       7 :     CACHE           Test    *
        *       8 :     Semi CACHE      Test    *
        *       9 :     NVRAM           Test    *
        *       A :     Switch          Test    *
        *       B :     BM              Test    *
        *       C :     PC I/F Board    Test    *
        *       Q :     E N D                   *
        *                                       *
        *****************************************
        Key In : 6
 9. 2 Port LANCE Test
        LANCE 0                         OK
        LANCE 1                         OK
        Key In : 7
10. Cache Test.                         OK
        Key In : 8
11. Semi Cache Test.                    OK
        Key In : 9
12. NVRAM Memory Test & Dainamic Memory Serging Test
        a. NVRAM Memory Test                            OK
        b. NVRAM Dynamic Bus Sizing Test                OK
        Key In : A
13. Switch ON / OFF Test
        Please  Push Power Switch
                ON              OFF
        Key In : B
CRTC-II Initialize Start    End
14. BM Memory   Test.(BM End address : $b11bffff)
        Pallet  Test(4P)                OK ( Write only ! )
        Data    Test                    OK
        Address Test                    OK
        Raster Operation calculation Test
         (Memory sel : 0001FFFF Hex, Mask : F0F0F0F0 Hex, Write : FFFF8000 Hex)
                Plane 0 Logic code (     ONE     )      CHECK OK !!
                Plane 1 Logic code (     ONE     )      CHECK OK !!
                Plane 2 Logic code (     ONE     )      CHECK OK !!
                Plane 3 Logic code (     ONE     )      CHECK OK !!
        Raster Operation same calculation Test
         (Memory sel : 0001FFFF Hex, Mask : F0F0F0F0 Hex, Write : FFFF8000 Hex)
                Plane 0~3 Logic code (     ONE     )    CHECK OK !!
        Key In :
        *****************************************
        *       Manual Test Menu                *
        *****************************************
        *                                       *
        *       1 :     3 Port Memory   Test    *
        *       2 :     Interrupt       Test    *
        *       3 :     SCSI            Test    *
        *       4 :     Calender        Test    *
        *       5 :     PIO             Test    *
        *       6 :     2 Port LAN      Test    *
        *       7 :     CACHE           Test    *
        *       8 :     Semi CACHE      Test    *
        *       9 :     NVRAM           Test    *
        *       A :     Switch          Test    *
        *       B :     BM              Test    *
        *       C :     PC I/F Board    Test    *
        *       Q :     E N D                   *
        *                                       *
        *****************************************
        Key In : C
 15. PC Interface Board Test.
        PC-I/F Board ON/OFF Check                       OK
        PC-I/F Memory Board ON/OFF Check-Test Board Set         NG (Memory board None)
        Key In :