Created
June 14, 2013 05:57
-
-
Save arran4/5779764 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
/home/arran | |
arran@JungSooRi 6944% sudo hdparm -I /dev/sda | |
/dev/sda: | |
ATA device, with non-removable media | |
Model Number: ST31500341AS | |
Serial Number: 9VS1HHCN | |
Firmware Revision: CC1H | |
Transport: Serial | |
Standards: | |
Used: unknown (minor revision code 0x0029) | |
Supported: 8 7 6 5 | |
Likely used: 8 | |
Configuration: | |
Logical max current | |
cylinders 16383 16383 | |
heads 16 16 | |
sectors/track 63 63 | |
-- | |
CHS current addressable sectors: 16514064 | |
LBA user addressable sectors: 268435455 | |
LBA48 user addressable sectors: 2930277168 | |
Logical/Physical Sector size: 512 bytes | |
device size with M = 1024*1024: 1430799 MBytes | |
device size with M = 1000*1000: 1500301 MBytes (1500 GB) | |
cache/buffer size = unknown | |
Nominal Media Rotation Rate: 7200 | |
Capabilities: | |
LBA, IORDY(can be disabled) | |
Queue depth: 32 | |
Standby timer values: spec'd by Standard, no device specific minimum | |
R/W multiple sector transfer: Max = 16 Current = ? | |
Recommended acoustic management value: 254, current value: 0 | |
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
Cycle time: min=120ns recommended=120ns | |
PIO: pio0 pio1 pio2 pio3 pio4 | |
Cycle time: no flow control=120ns IORDY flow control=120ns | |
Commands/features: | |
Enabled Supported: | |
* SMART feature set | |
Security Mode feature set | |
* Power Management feature set | |
Write cache | |
* Look-ahead | |
* Host Protected Area feature set | |
* WRITE_BUFFER command | |
* READ_BUFFER command | |
* DOWNLOAD_MICROCODE | |
SET_MAX security extension | |
* Automatic Acoustic Management feature set | |
* 48-bit Address feature set | |
* Device Configuration Overlay feature set | |
* Mandatory FLUSH_CACHE | |
* FLUSH_CACHE_EXT | |
* SMART error logging | |
* SMART self-test | |
* General Purpose Logging feature set | |
* WRITE_{DMA|MULTIPLE}_FUA_EXT | |
* 64-bit World wide name | |
Write-Read-Verify feature set | |
* WRITE_UNCORRECTABLE_EXT command | |
* {READ,WRITE}_DMA_EXT_GPL commands | |
* Segmented DOWNLOAD_MICROCODE | |
* Gen1 signaling speed (1.5Gb/s) | |
* Gen2 signaling speed (3.0Gb/s) | |
* Native Command Queueing (NCQ) | |
* Phy event counters | |
Device-initiated interface power management | |
* Software settings preservation | |
* SMART Command Transport (SCT) feature set | |
* SCT Long Sector Access (AC1) | |
* SCT LBA Segment Access (AC2) | |
* SCT Error Recovery Control (AC3) | |
* SCT Features Control (AC4) | |
* SCT Data Tables (AC5) | |
unknown 206[12] (vendor specific) | |
Security: | |
Master password revision code = 65534 | |
supported | |
not enabled | |
not locked | |
not frozen | |
not expired: security count | |
supported: enhanced erase | |
262min for SECURITY ERASE UNIT. 262min for ENHANCED SECURITY ERASE UNIT. | |
Logical Unit WWN Device Identifier: 5000c50011353fc1 | |
NAA : 5 | |
IEEE OUI : 000c50 | |
Unique ID : 011353fc1 | |
Checksum: correct | |
/home/arran | |
arran@JungSooRi 6945% sudo hdparm -I /dev/sdb | |
/dev/sdb: | |
ATA device, with non-removable media | |
Model Number: ST31500341AS | |
Serial Number: 9VS1E6Q3 | |
Firmware Revision: CC1H | |
Transport: Serial | |
Standards: | |
Used: unknown (minor revision code 0x0029) | |
Supported: 8 7 6 5 | |
Likely used: 8 | |
Configuration: | |
Logical max current | |
cylinders 16383 16383 | |
heads 16 16 | |
sectors/track 63 63 | |
-- | |
CHS current addressable sectors: 16514064 | |
LBA user addressable sectors: 268435455 | |
LBA48 user addressable sectors: 2930277168 | |
Logical/Physical Sector size: 512 bytes | |
device size with M = 1024*1024: 1430799 MBytes | |
device size with M = 1000*1000: 1500301 MBytes (1500 GB) | |
cache/buffer size = unknown | |
Nominal Media Rotation Rate: 7200 | |
Capabilities: | |
LBA, IORDY(can be disabled) | |
Queue depth: 32 | |
Standby timer values: spec'd by Standard, no device specific minimum | |
R/W multiple sector transfer: Max = 16 Current = ? | |
Recommended acoustic management value: 254, current value: 0 | |
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 | |
Cycle time: min=120ns recommended=120ns | |
PIO: pio0 pio1 pio2 pio3 pio4 | |
Cycle time: no flow control=120ns IORDY flow control=120ns | |
Commands/features: | |
Enabled Supported: | |
* SMART feature set | |
Security Mode feature set | |
* Power Management feature set | |
Write cache | |
* Look-ahead | |
* Host Protected Area feature set | |
* WRITE_BUFFER command | |
* READ_BUFFER command | |
* DOWNLOAD_MICROCODE | |
SET_MAX security extension | |
* Automatic Acoustic Management feature set | |
* 48-bit Address feature set | |
* Device Configuration Overlay feature set | |
* Mandatory FLUSH_CACHE | |
* FLUSH_CACHE_EXT | |
* SMART error logging | |
* SMART self-test | |
* General Purpose Logging feature set | |
* WRITE_{DMA|MULTIPLE}_FUA_EXT | |
* 64-bit World wide name | |
Write-Read-Verify feature set | |
* WRITE_UNCORRECTABLE_EXT command | |
* {READ,WRITE}_DMA_EXT_GPL commands | |
* Segmented DOWNLOAD_MICROCODE | |
* Gen1 signaling speed (1.5Gb/s) | |
* Gen2 signaling speed (3.0Gb/s) | |
* Native Command Queueing (NCQ) | |
* Phy event counters | |
Device-initiated interface power management | |
* Software settings preservation | |
* SMART Command Transport (SCT) feature set | |
* SCT Long Sector Access (AC1) | |
* SCT LBA Segment Access (AC2) | |
* SCT Error Recovery Control (AC3) | |
* SCT Features Control (AC4) | |
* SCT Data Tables (AC5) | |
unknown 206[12] (vendor specific) | |
Security: | |
Master password revision code = 65534 | |
supported | |
not enabled | |
not locked | |
not frozen | |
not expired: security count | |
supported: enhanced erase | |
254min for SECURITY ERASE UNIT. 254min for ENHANCED SECURITY ERASE UNIT. | |
Logical Unit WWN Device Identifier: 5000c500111f7781 | |
NAA : 5 | |
IEEE OUI : 000c50 | |
Unique ID : 0111f7781 | |
Checksum: correct |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment