rock64 okay boot

output.log

U-Boot TPL 2022.07-armbian (May 27 2023 - 19:26:49)                                                                                                             
LPDDR3, 800MHz                                                                                                                                                  
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Sizeot from BOOTROM                                                                                                 
Returning to boot ROM...                                                                                                                                        
                                                                                                                                                                
U-Boot SPL 2022.07-armbian (May 27 2023 - 19:26:49 +0000)                                                                                                       
Trying to boot from MMC1                                                                                                                                        
NOTICE:  BL31: v2.6(release):armbian                                                                                                                            
NOTICE:  BL31: Built : 19:23                                                                                                                                    
NOTICE:  BL31:Rockchip relea    ARM GICv2 driver initialized                                                                                                    
INFO:    plat_rockchip_pmu_inistatus 0xe                                                                                                                        
INFO:    BL31: Initi                                                                                                                                            
INFO:    BL31: Preparing for EL3 exit to normal world                                                                                                           
INFO:  oint address = 0x200000                                                                                                                                  
INFO:                                                                                                                                                           

U-Boot 2022.07-armbian (May 27 2023 - 19:26:49 +0000)

Model: Pine64 Rock64
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x50, off=0x01)
Core:  229 devices, 25 uclasses, devicetree: separate
MMC:   mmc@ff500000: 1, mmc@ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ffModel: Pine64 Rock64
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0 
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3252 bytes read in 6 ms (529.3 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
117 bytes read in 5 ms (22.5 KiB/s)
14085809 bytes read in 623 ms (21.6 MiB/s)
29331968 bytes read in 1290 ms (21.7 MiB/s)
52872 bytes read in 12 ms (4.2 MiB/s)
2698 bytes read in 9 ms (292 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scng script at 09000000
Unknown command 'kaslrseed' - try 'help'
Moving Image from 0x2080000 to 0x2200000, end=3e90000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image TyArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    1es = 13.4 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Lok to 3d1b2000, end 3df20e71 ... OK
   Loading Device Tree to 000000003d13c000, end 000000003d1b1fff ... OK

Starting kernel ...


rock64 login: root (automatic login)