Skip to content

Instantly share code, notes, and snippets.

@arronmabrey

arronmabrey/gist:5505503

Forked from tkersey/gist:1130675
Created May 2, 2013 21:12
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save arronmabrey/5505503 to your computer and use it in GitHub Desktop.
Save arronmabrey/5505503 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
gistfile1.md

found at: http://fascinated.fm/post/2379188731/getting-a-motorola-sbg6580-into-bridge-mode-on

Getting a Motorola SBG6580 into “Bridge” mode on TimeWarner Wideband

  1. Unplug coax cable from Motorola
  2. Hold down the white reset button on the back panel with a pen for 30s.  This resets all settings to factory defaults. The modem will be auto-reconfigured once you plug in the coax cable.
  3. When modem is back on plug in a computer with an Ethernet cable into the modem.
  4. Connect to http://192.168.0.1 and login with “admin” / “motorola”
  5. Now you will make some changes:
 
    • Wireless -> Primary Network -> Disabled
    • Basic -> Setup -> NAPT Mode -> Disabled
    • Basic -> DHCP -> No
    • Advanced -> Options -> Rg Passthrough -> Enable
    • Advanced -> Options -> Passthrough Mac Addresses -> Add WAN MAC address of your router 6. Connect port 1 on the Motorola modem to the WAN port of your router.
  6. Plug the coaxial cable back into the modem and power cycle it.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment