Last active
August 16, 2024 01:04
-
-
Save artixnous/41f4bde311442aba6a4f5523db921415 to your computer and use it in GitHub Desktop.
Fast convert systemd Arch to OpenRC Artix
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
#!/bin/bash | |
# nous,2019-2022 | |
# How to use | |
# wget https://tiny.cc/fucksystemd | |
# chmod +x fucksystemd | |
# sudo ./fucksystemd | |
# Test Arch ISO installation: | |
# cfdisk /dev/sda | |
# mkfs.ext4 /dev/sda1 | |
# mount /dev/sda1 /mnt | |
# pacstrap /mnt base linux linux-firmware openssh wget rsync dhcpcd grub | |
# arch-chroot /mnt | |
# grub-install /dev/sda | |
# mkinitcpio -P | |
# grub-mkconfig -o /boot/grub/grub.cfg | |
source /usr/share/makepkg/util/message.sh | |
colorize | |
echo "$ALL_OFF$BOLD You should run this from inside screen(1) or tmux(1)," | |
echo "$BOLD especially if this is a remote box." | |
echo "$BOLD Use a terminal/session with a large scrollback buffer" | |
echo | |
read -n 1 -p "$RED Last chance to press CTRL-C, ENTER to continue. " | |
echo | |
echo "$CYAN Starting operation FUCKTHESKULLOFSYSTEMD" | |
echo | |
testerror() { [[ $res > 0 ]] && { echo "$RED An error occured, aborting to prevent incomplete conversion. Fix it and re-run the script FROM THE LAST STEP ONWARDS.$ALL_OFF"; exit 1; } } | |
[[ $1 == openrc ]] && target=openrc | |
[[ $1 == runit ]] && target=runit | |
# runit not yet implemented | |
#[[ $target ]] || { echo "Usage: $0 <openrc|runit>" ; exit 1; } | |
#echo "Target: $target" | |
rm -f /var/lib/pacman/db.lck | |
sed -i s/Arch/Artix/g /etc/default/grub | |
# A full systemd update is needed, because libsystemd->systemd-libs | |
echo "$GREEN Updating Arch system first, if this fails abort and update manually; then re-run the script $ALL_OFF" | |
pacman -Syu --noconfirm | |
res=$?; testerror | |
pacman -S --needed --noconfirm wget nano rsync | |
res=$?; testerror | |
cd /etc | |
echo | |
echo "$GREEN Replacing Arch repositories with Artix $ALL_OFF" | |
mv -vf pacman.conf pacman.conf.arch | |
wget https://gitea.artixlinux.org/packagesP/pacman/raw/branch/master/trunk/pacman.conf -O /etc/pacman.conf | |
res=$?; testerror | |
sed -i 's/#Parallel/Parallel/' /etc/pacman.conf | |
mv -vf pacman.d/mirrorlist pacman.d/mirrorlist-arch | |
wget https://gitea.artixlinux.org/packagesA/artix-mirrorlist/raw/branch/master/trunk/mirrorlist -O pacman.d/mirrorlist | |
res=$?; testerror | |
cp -vf pacman.d/mirrorlist pacman.d/mirrorlist.artix | |
sed -i 's/Required DatabaseOptional/Never/' pacman.conf | |
echo "$GREEN Refreshing package databases $ALL_OFF" | |
pacman -Syy --noconfirm | |
res=$?; testerror | |
echo | |
read -n 1 -p "$GREEN Press ENTER and answer <yes> to the next question to make sure all packages come from Artix repos $ALL_OFF " | |
echo | |
pacman -Scc | |
echo "$GREEN Importing Artix keys $ALL_OFF" | |
pacman -S --noconfirm artix-keyring | |
res=$?; testerror | |
pacman-key --populate artix | |
res=$?; testerror | |
pacman-key --lsign-key 95AEC5D0C1E294FC9F82B253573A673A53C01BC2 | |
res=$?; testerror | |
[ -x /bin/systemctl ] && systemctl list-units --state=running | grep -v systemd | awk '{print $1}' | grep service > /root/daemon.list | |
echo "$MAGENTA Your systemd running units are saved in /root/daemon.list.$ALL_OFF" | |
echo | |
read -n 1 -p "$RED Do not proceed if you've seen errors above - press CTRL-C to abort or ENTER to continue $ALL_OFF " | |
echo | |
echo "$GREEN Downloading systemd-free packages from Artix $ALL_OFF" | |
pacman -Sw --noconfirm base base-devel openrc-system grub linux-lts linux-lts-headers elogind-openrc openrc netifrc grub mkinitcpio net-tools rsync nano lsb-release esysusers etmpfiles | |
res=$?; testerror | |
echo | |
echo "$YELLOW This is the best part: removing systemd $ALL_OFF" | |
pacman -Rdd --noconfirm systemd systemd-libs systemd-sysvcompat dbus | |
pacman -Rdd pacman-mirrorlist | |
# Previous pacman-mirrorlist removal also deleted this, restoring | |
cp -vf pacman.d/mirrorlist.artix pacman.d/mirrorlist | |
echo "$GREEN Installing clean Artix packages $ALL_OFF" | |
pacman -S --noconfirm elogind-openrc | |
pacman -Qqn | pacman -S --noconfirm --overwrite '*' - | |
res=$?; testerror | |
echo "$GREEN Installing Artix system packages $ALL_OFF" | |
pacman -S --noconfirm --needed --overwrite '*' base base-devel openrc-system linux-lts linux-lts-headers elogind-openrc openrc netifrc grub mkinitcpio net-tools rsync nano lsb-release connman esysusers etmpfiles artix-branding-base | |
res=$?; testerror | |
echo "$GREEN Installing service files $ALL_OFF" | |
pacman -S --noconfirm --needed at-openrc xinetd-openrc cronie-openrc haveged-openrc hdparm-openrc openssh-openrc syslog-ng-openrc connman-openrc | |
res=$?; testerror | |
echo "$YELLOW Removing left-over cruft $ALL_OFF" | |
rm -fv /etc/resolv.conf | |
echo "$GREEN Enabling basic services $ALL_OFF" | |
rc-update add haveged sysinit | |
rc-update add udev sysinit | |
rc-update add sshd default | |
echo | |
echo "$BOLD Activating standard network interface naming (i.e. enp72^7s128%397 --> eth0)." | |
echo "$BOLD If you prefer the persistent naming, remove the last line from /etc/default/grub" | |
echo "$BOLD and run $ALL_OFF grub-mkconfig -o /boot/grub/grub.cfg $BOLD when this script prompts for reboot." | |
echo | |
read -n 1 -p "Press ENTER $ALL_OFF" | |
echo 'GRUB_CMDLINE_LINUX="net.ifnames=0"' >>/etc/default/grub | |
echo 'GRUB_DISABLE_OS_PROBER="false"' >>/etc/default/grub | |
pacman -S --needed --noconfirm netifrc | |
echo "=============================" | |
echo "$BOLD Write down you IP and route.$ALL_OFF" | |
echo "=============================" | |
ifconfig | |
route | |
echo "===============================================================" | |
echo "$BOLD Press ENTER to edit conf.d/net to configure static networking." | |
echo "$BOLD No editing is needed if you use dhcp or a network manager, but" | |
echo "$BOLD you MUST enable the daemon manually BEFORE rebooting. " | |
echo "$BOLD You will be given the option at the end of this procedure. " | |
echo "$BOLD Default setting is DHCP for eth0, should be enough for most.$ALL_OFF" | |
echo "===============================================================" | |
read -n 1 -p " " | |
nano /etc/conf.d/net | |
ln -sf /etc/init.d/net.lo /etc/init.d/net.eth0 | |
rc-update add net.eth0 default | |
res=$?; testerror | |
# Good riddance | |
echo "$YELLOW Removing more systemd cruft $ALL_OFF" | |
for user in journal journal-gateway timesync network bus-proxy journal-remote journal-upload resolve coredump; | |
do userdel systemd-$user | |
done | |
rm -vfr /{etc,var/lib}/systemd | |
echo "$GREEN Restoring pacman.conf security settings $ALL_OFF" | |
sed -i 's/= Never/= Required DatabaseOptional/' /etc/pacman.conf | |
echo "$GREEN Making OpenRC start faster $ALL_OFF" | |
sed -i 's/#rc_parallel="NO"/rc_parallel="YES"/' /etc/rc.conf | |
echo "$GREEN Replacing Arch with Artix in hostname and issue $ALL_OFF" | |
sed -i 's/Arch/Artix/ig' /etc/hostname /etc/issue 2>/dev/null | |
echo "$GREEN Recreating initrds $ALL_OFF" | |
mkinitcpio -P | |
echo "$GREEN Recreating grub.cfg $ALL_OFF" | |
cp -vf /boot/grub/grub.cfg /boot/grub/grub.cfg.arch | |
grub-mkconfig -o /boot/grub/grub.cfg | |
res=$?; testerror | |
echo "=============================================" | |
echo "= If you haven't seen any errors =" | |
echo "= press ENTER to reboot =" | |
echo "= Otherwise switch console and fix them =" | |
echo "= =" | |
echo "= =" | |
echo "= Press CTRL-C to stop reboot =" | |
echo "=(mandatory if you need a networking daemon)=" | |
echo "=Or switch console/terminal and type as root=" | |
echo "= $BOLD rc-service add connmand $ALL_OFF =" | |
echo "= then switch back here and continue =" | |
echo "=============================================" | |
read -n 1 -p " " | |
sync | |
mount -f / -o remount,ro | |
echo s >| /proc/sysrq-trigger | |
echo u >| /proc/sysrq-trigger | |
echo b >| /proc/sysrq-trigger |
I'd like to fork this - is there a license?
Free for all.
Ah, the new init is alphabetically before openrc now and needs explicit installation. Should be fixed. now.
Hey there! Apparently the script is unable to find artix-archlinux-support
Downloading systemd-free packages from Artix
:: There are 26 members in group base-devel:
:: Repository system
1) autoconf 2) automake 3) binutils 4) bison 5) esysusers 6) etmpfiles 7) fakeroot 8) file 9) findutils 10) flex 11) gawk 12) gcc 13) gettext 14) grep 15) groff 16) gzip 17) libtool 18) m4 19) make 20) pacman
21) patch 22) pkgconf 23) sed 24) sudo 25) texinfo 26) which
Enter a selection (default=all):
:: There are 16 members in group openrc-system:
:: Repository system
1) audit-openrc 2) cronie-openrc 3) cryptsetup-openrc 4) dhcpcd-openrc 5) glibc-openrc 6) gpm-openrc 7) hdparm-openrc 8) iptables-openrc 9) krb5-openrc 10) lvm2-openrc 11) mdadm-openrc 12) nfs-utils-openrc
13) openldap-openrc 14) openssh-openrc 15) rpcbind-openrc 16) wpa_supplicant-openrc
Enter a selection (default=all):
error: target not found: artix-archlinux-support
An error occured, aborting to prevent incomplete conversion. Fix it and re-run the script FROM THE LAST STEP ONWARDS.
Artix no longer depends on any Arch repos to operate, artix-archlinux-support is redundant and not needed for the conversion. Updated.
Artix no longer depends on any Arch repos to operate, artix-archlinux-support is redundant and not needed for the conversion. Updated.
The arch repos package have been moved over to the universe
repo of artix
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Replaced with '--overwrite'.