Skip to content

Instantly share code, notes, and snippets.

View ask1234560's full-sized avatar
🌺
Free as in free speech, not free beer.

Ananthu ask1234560

🌺
Free as in free speech, not free beer.
View GitHub Profile
@pjdietz
pjdietz / Virtual Box Host Only Static IP.md
Created June 12, 2013 19:01
VirtualBox Host-Only Adapter with Static IP

VirtualBox Host-Only Static IP

My typical setup for a development box in VirtualBox uses two NICs. The first uses NAT to allow the box to communicate with the outside world through my host computer’s network connection. (NAT is the default, so shouldn't require any setup.) The second is a "host-only" connection that allows my host and guest to interact.

To create a host-only connection in VirtualBox, start by opening the preferences in VirtualBox. Go to the "Network" tab, and addd a Host-only Network. Modify the host-only network, and disable DHCP. Make a note of the IP address. (Feel free to set the IP address as well, if you like.)

Next, assign this host-only adapter to the virtual machine. Select the VM and press "Settings". Go to the "Network" tab, and select "Adpater 2". Enable the adapter, set it to a "Host-only Adapter", and select the adpater you created above.

Temporary