Mongo Replica Set docker compose

docker-compose-mongo-replicaset.yml

version: "3"
services:
  mongo1:
    hostname: mongo1
    container_name: localmongo1
    image: mongo:4.0-xenial
    expose:
    - 27017
    ports:
      - 27011:27017
    restart: always
    entrypoint: [ "/usr/bin/mongod", "--bind_ip_all", "--replSet", "rs0" ]
  mongo2:
    hostname: mongo2
    container_name: localmongo2
    image: mongo:4.0-xenial
    expose:
    - 27017
    ports:
    - 27012:27017
    restart: always
    entrypoint: [ "/usr/bin/mongod", "--bind_ip_all", "--replSet", "rs0" ]
  mongo3:
    hostname: mongo3
    container_name: localmongo3
    image: mongo:4.0-xenial
    expose:
    - 27017
    ports:
    - 27013:27017
    restart: always
    entrypoint: [ "/usr/bin/mongod", "--bind_ip_all", "--replSet", "rs0" ]

> rs.initiate({
...   _id : 'rs0',
...   members: [
...     { _id : 0, host : "{YOUR_LOCAL_IP}:27717" },
...     { _id : 1, host : "{YOUR_LOCAL_IP}:27718" },
...     { _id : 2, host : "{YOUR_LOCAL_IP}:27720",  arbiterOnly: true }
...   ]
... })
{
	"operationTime" : Timestamp(0, 0),
	"ok" : 0,
	"errmsg" : "No host described in new configuration 1 for replica set rs0 maps to this node",
	"code" : 93,
	"codeName" : "InvalidReplicaSetConfig",
	"$clusterTime" : {
		"clusterTime" : Timestamp(0, 0),
		"signature" : {
			"hash" : BinData(0,"AAAAAAAAAAAAAAAAAAAAAAAAAAA="),
			"keyId" : NumberLong(0)
		}
	}
}
>

I am getting this error in window. I tested it in mac which works fine

for single

I followed the steps below to run a simple replica set with one member for local development which works fine

for work environment i need to configure three standalone system docker container mongo. can you please suggest what change i need to do

is it possible to configure MongoDB replication inside docker with three different standalone server system. I have configured in single server system its working fine when am trying to configure on three different machine, secondary system is not able to add. Please help me out.

Do not use x.509 Certificates or keyfile?

> rs.initiate({
...   _id : 'rs0',
...   members: [
...     { _id : 0, host : "{YOUR_LOCAL_IP}:27717" },
...     { _id : 1, host : "{YOUR_LOCAL_IP}:27718" },
...     { _id : 2, host : "{YOUR_LOCAL_IP}:27720",  arbiterOnly: true }
...   ]
... })
{
	"operationTime" : Timestamp(0, 0),
	"ok" : 0,
	"errmsg" : "No host described in new configuration 1 for replica set rs0 maps to this node",
	"code" : 93,
	"codeName" : "InvalidReplicaSetConfig",
	"$clusterTime" : {
		"clusterTime" : Timestamp(0, 0),
		"signature" : {
			"hash" : BinData(0,"AAAAAAAAAAAAAAAAAAAAAAAAAAA="),
			"keyId" : NumberLong(0)
		}
	}
}
>

I am getting this error in window. I tested it in mac which works fine

I was able to solve the problem. Because I googled my ip address which is not configurable in mongoshell. running ipconfig to find the actual ipv4 address solve my issue

I resolved this problem using my local (host) IP:

rs.initiate({
  _id : 'rs0',
  members: [
    { _id : 0, host : "{YOUR_LOCAL_IP}:27011" },
    { _id : 1, host : "{YOUR_LOCAL_IP}:27012" },
    { _id : 2, host : "{YOUR_LOCAL_IP}:27013" }
  ]
})

This worked for me too 👍

Im confused - Did you exec into the mongo node container in order to setup the cluster? e.g. follow this to the letter? https://gist.github.com/asoorm/7822cc742831639c93affd734e97ce4f#gistcomment-2707084
Because the docker containers for Mongo are in the same network. e.g. mongo1 should be able to communicate with mongo2 via it's hostname & port. mongo2:27017.
If your mongo1 needs to go via the host machine (outside of docker) and come back into docker again, something clearly is not working.

@asoorm, yes, I followed the steps exactly. I found that the issue was from my host machine resolving the hostnames (mongo1, mongo2, mongo3).

I fixed this by adding the hostnames to /etc/hosts:

sudo echo "127.0.0.1 mongo1
          127.0.0.1 mongo2
          127.0.0.1 mongo3" | sudo tee -a /etc/hosts

and then this worked as expected:

rs.initiate(
  {
    _id : 'rs0',
    members: [
      { _id : 0, host : "mongo1:27017" },
      { _id : 1, host : "mongo2:27017" },
      { _id : 2, host : "mongo3:27017" }
    ]
  }
)

This worked for me, thanks.

Follow the below compose file, no more manual changes

mongodb:
   hostname: mongodb
   container_name: mongodb
   image: mongo:latest
   environment:
     MONGO_INITDB_DATABASE: moviebooking
     MONGO_REPLICA_SET_NAME: rs0
   volumes:
     - ./mongo-initdb.d:/docker-entrypoint-initdb.d
   expose:
     - 27017
   ports:
     - "27017:27017"
   restart: always
   healthcheck:
     test: test $$(echo "rs.initiate().ok || rs.slaveOk().ok || rs.status().ok" | mongo --quiet) -eq 1
     interval: 10s
     start_period: 30s
   entrypoint: [ "/usr/bin/mongod", "--bind_ip_all", "--replSet", "rs0" ]

shell into the container: docker exec -it mongodb /bin/bash

you should see the below

I know this has been here for awhile, but just doing this and liked the post by @mohansainani about doing this in a single docker image.

On a Mac, the only problem was that I was getting a error

Could not find host matching read preference { mode: \"nearest\" }

that indicated there was a network issue.

So.. I also used

sudo echo "127.0.0.1 mongodb" | sudo tee -a /etc/hosts

to make the host "findable"

After that I could connect with

mongo mongodb://localhost:27017/moviebooking?replicaSet=rs0

If that helps, bitnami/mongodb is a super good image.

  mongodb:
    image: bitnami/mongodb
    environment:
      MONGODB_REPLICA_SET_MODE: primary
      ALLOW_EMPTY_PASSWORD: "yes"

I can run everything perfectly but I can not connect to the set by any client.

I can run everything perfectly but I can not connect to the set by any client.

i have same problem
hel;p

Error:
getaddrinfo ENOTFOUND mongodb-primary

If that helps, bitnami/mongodb is a super good image.

  mongodb:
    image: bitnami/mongodb
    environment:
      MONGODB_REPLICA_SET_MODE: primary
      ALLOW_EMPTY_PASSWORD: "yes"

How did you configure the port

I have setup everything in this https://github.com/nguyenduyhust/docker-mongodb-replica-set.
Great if that's what you're looking for.

When I tried to connect with string URI mongodb://localhost:27011,localhost:27012,localhost:27013/?replicaSet=rs0 using Compass I got the following error
getaddrinfo EAI_AGAIN mongo1

By the way, you all would have to expose all Mongo replicaset instances ports in order to get connected to them, so I think It's redundant being exposing ports, It's better to use host network mode.

I was looking for a simple Compose for this and, unfortunately, I didn't find one complete and simple at the same time, because of that I made one as simple as possible where the secondary ones ingress their selfies on the master without any third-party script.

I hope you all find it useful

version: "3"
services:
  node0:
    image: mongo
    restart: always
    command: --replSet rs0 --bind_ip_all
    network_mode: host
    healthcheck:
      test: >
        mongosh --eval "try{rs.initiate().ok}catch(e){rs.status().ok}"
      interval: 3s

  node1:
    image: mongo
    depends_on:
      - node0
    restart: always
    command: --replSet rs0 --bind_ip_all --port 27018
    network_mode: host
    environment:
      PORT: 27018
    healthcheck:
      test: >
        mongosh --host localhost:27017 --eval "var me = '$${HOSTNAME}:$${PORT}'; rs.status().members.some(m => m.name == me) || rs.add({host: me})"
      interval: 3s

  node2:
    image: mongo
    depends_on:
      - node0
    restart: always
    command: --replSet rs0 --bind_ip_all --port 27019
    network_mode: host
    environment:
      PORT: 27019
    healthcheck:
      test: >
        mongosh --host localhost:27017 --eval "var me = '$${HOSTNAME}:$${PORT}'; rs.status().members.some(m => m.name == me) || rs.add({host: me})"
      interval: 3s

docker exec -it mongodb /bin/bash

This worked perfectly for me to create and start the mongodb set on docker containers. I can also connect to any of the servers using compass. But when I tried to open a connection from another server in the docker network (a php server), using php mongodb client, I got "Authentication failed" using this url:

mongodb://172.24.0.5:27017,172.24.0.3:27017,172.24.0.4:27017?replicaSet=dbrs

I am also sending my username and password, same that I am using in the compass connection url. The internal ips are correct, so that is not the problem.

So, basically, replicaset is up and running, I can connect from MongoDB Compass but I can't connect from my PHP code from a docker container in the same docker network.