config.ini

[GLOBAL]
PATH: ./
PING_TIME: 5
MAX_MISSED: 3
USE_ACL: True
REG_ACL: PERMIT:ALL
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL

[REPORTS]
REPORT: True
REPORT_INTERVAL: 60
REPORT_PORT: 4321
REPORT_CLIENTS: 127.0.0.1

[LOGGER]
LOG_FILE: /tmp/hblink.log
LOG_HANDLERS: console-timed
LOG_LEVEL: DEBUG
LOG_NAME: HBlink

[ALIASES]
TRY_DOWNLOAD: True
PATH: ./
PEER_FILE: peer_ids.json
SUBSCRIBER_FILE: subscriber_ids.json
TGID_FILE: talkgroup_ids.json
PEER_URL: https://www.radioid.net/static/rptrs.json
SUBSCRIBER_URL: https://www.radioid.net/static/users.json
STALE_DAYS: 7

# MASTER INSTANCES - DUPLICATE SECTION FOR MULTIPLE MASTERS
# HomeBrew Protocol Master instances go here.
# IP may be left blank if there's one interface on your system.
# Port should be the port you want this master to listen on. It must be unique
# and unused by anything else.
# Repeat - if True, the master repeats traffic to peers, False, it does nothing.
#
# MAX_PEERS -- maximun number of peers that may be connect to this master
# at any given time. This is very handy if you're allowing hotspots to
# connect, or using a limited computer like a Raspberry Pi.
#
# ACLs:
# See comments in the GLOBAL stanza
[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
MAX_PEERS: 10
EXPORT_AMBE: False
IP:
PORT: 54000 #порт
PASSPHRASE: s3cr37w0rd #пароль
GROUP_HANGTIME: 5
USE_ACL: False # було True. Перевірка прав клієнтів. Я не певн що у нас так, але спробуй
REG_ACL: DENY:1
SUB_ACL: DENY:1
TGID_TS1_ACL: PERMIT:ALL
TGID_TS2_ACL: PERMIT:ALL