Skip to content

Instantly share code, notes, and snippets.

@avafinger

avafinger/Mainline Kenel 5.1-rc6 NanoPi M4

Created April 21, 2019 23:44
Show Gist options
  • Save avafinger/12c7ba931eec5972c7cfb19af0fa326a to your computer and use it in GitHub Desktop.
Save avafinger/12c7ba931eec5972c7cfb19af0fa326a to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Mainline Kenel 5.1-rc6 mpdules NanoPi M4
Module Size Used by
brcmfmac 225280 0
rockchipdrm 118784 1
brcmutil 16384 1 brcmfmac
cfg80211 327680 1 brcmfmac
analogix_dp 36864 1 rockchipdrm
dw_hdmi 32768 1 rockchipdrm
dw_mipi_dsi 20480 1 rockchipdrm
drm_kms_helper 180224 4 dw_mipi_dsi,rockchipdrm,dw_hdmi,analogix_dp
hci_uart 49152 0
drm 425984 6 drm_kms_helper,dw_mipi_dsi,rockchipdrm,dw_hdmi,analogix_dp
realtek 20480 1
btbcm 16384 1 hci_uart
bluetooth 335872 23 hci_uart,btbcm
dwmac_rk 28672 0
stmmac_platform 20480 1 dwmac_rk
crct10dif_ce 16384 1
ecdh_generic 24576 2 bluetooth
stmmac 135168 2 stmmac_platform,dwmac_rk
rfkill 28672 4 bluetooth,cfg80211
phy_rockchip_pcie 16384 0
rockchip_thermal 24576 0
rtc_rk808 16384 1
rockchip_saradc 16384 0
drm_panel_orientation_quirks 20480 1 drm
pcie_rockchip_host 20480 0
ip_tables 32768 0
x_tables 36864 1 ip_tables
ipv6 393216 26
Raw
Mainline Kenel 5.1-rc6 NanoPi M4
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.1.0-rc6 (ubuntu@nanopi-m4) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04)) #1 SMP PREEMPT Sun Apr 21 22:58:24 UTC 2019
[ 0.000000] Machine model: FriendlyElec NanoPi M4
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7da92840-0x7da93fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 523776
[ 0.000000] DMA32 zone: 8184 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] random: get_random_bytes called from start_kernel+0xa4/0x470 with crng_init=0
[ 0.000000] percpu: Embedded 23 pages/cpu s56664 r8192 d29352 u94208
[ 0.000000] pcpu-alloc: s56664 r8192 d29352 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[ 0.000000] Memory: 2001432K/2095104K available (11324K kernel code, 1708K rwdata, 5548K rodata, 1408K init, 448K bss, 60904K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x000000007b440000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b450000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] rockchip_mmc_get_phase: invalid clk rate
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.003698] Console: colour dummy device 80x25
[ 0.005002] printk: console [tty0] enabled
[ 0.005177] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.005235] pid_max: default: 32768 minimum: 301
[ 0.005438] LSM: Security Framework initializing
[ 0.007091] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007962] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008075] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.008140] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.008979] *** VALIDATE proc ***
[ 0.009350] *** VALIDATE cgroup1 ***
[ 0.009384] *** VALIDATE cgroup2 ***
[ 0.031812] ASID allocator initialised with 32768 entries
[ 0.039813] rcu: Hierarchical SRCU implementation.
[ 0.047991] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.048519] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.056884] EFI services will not be available.
[ 0.061578] smp: Bringing up secondary CPUs ...
[ 0.093883] Detected VIPT I-cache on CPU1
[ 0.093932] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.093951] GICv3: CPU1: using allocated LPI pending table @0x000000007b460000
[ 0.094004] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.126011] Detected VIPT I-cache on CPU2
[ 0.126052] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.126069] GICv3: CPU2: using allocated LPI pending table @0x000000007b470000
[ 0.126110] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.158172] Detected VIPT I-cache on CPU3
[ 0.158212] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.158229] GICv3: CPU3: using allocated LPI pending table @0x000000007b500000
[ 0.158269] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.192992] CPU features: detected: EL2 vector hardening
[ 0.193503] Detected PIPT I-cache on CPU4
[ 0.194721] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.195182] GICv3: CPU4: using allocated LPI pending table @0x000000007b510000
[ 0.196378] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.236666] Detected PIPT I-cache on CPU5
[ 0.237835] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.238269] GICv3: CPU5: using allocated LPI pending table @0x000000007b520000
[ 0.239348] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.244540] smp: Brought up 1 node, 6 CPUs
[ 0.245116] SMP: Total of 6 processors activated.
[ 0.245158] CPU features: detected: 32-bit EL0 Support
[ 0.245199] CPU features: detected: CRC32 instructions
[ 0.255652] CPU: All CPU(s) started at EL2
[ 0.256450] alternatives: patching kernel code
[ 0.261473] devtmpfs: initialized
[ 0.286374] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.286815] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.290162] pinctrl core: initialized pinctrl subsystem
[ 0.296685] DMI not present or invalid.
[ 0.298369] NET: Registered protocol family 16
[ 0.302493] audit: initializing netlink subsys (disabled)
[ 0.303025] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1
[ 0.310477] cpuidle: using governor menu
[ 0.312265] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.312936] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.326682] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.332692] Serial: AMBA PL011 UART driver
[ 0.466444] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.466633] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.466681] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.466725] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.469287] cryptd: max_cpu_qlen set to 1000
[ 0.473976] ACPI: Interpreter disabled.
[ 0.482894] vcc5v0_core: supplied by vdd_5v
[ 0.483471] vcc5v0_sys: supplied by vdd_5v
[ 0.483621] vbus_typec: supplied by vdd_5v
[ 0.483977] vcc5v0_usb1: supplied by vcc5v0_sys
[ 0.484323] vcc3v3_sys: supplied by vcc5v0_core
[ 0.484489] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.484875] vcc5v0_usb2: supplied by vcc5v0_sys
[ 0.496184] vgaarb: loaded
[ 0.497634] SCSI subsystem initialized
[ 0.498938] libata version 3.00 loaded.
[ 0.499841] usbcore: registered new interface driver usbfs
[ 0.500077] usbcore: registered new interface driver hub
[ 0.500558] usbcore: registered new device driver usb
[ 0.505399] pps_core: LinuxPPS API ver. 1 registered
[ 0.505557] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.505716] PTP clock support registered
[ 0.507849] EDAC MC: Ver: 3.0.0
[ 0.517521] Advanced Linux Sound Architecture Driver Initialized.
[ 0.521767] clocksource: Switched to clocksource arch_sys_counter
[ 0.522729] VFS: Disk quotas dquot_6.6.0
[ 0.522903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.523079] *** VALIDATE hugetlbfs ***
[ 0.523564] pnp: PnP ACPI: disabled
[ 0.549732] NET: Registered protocol family 2
[ 0.552952] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 0.553160] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.554015] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.554616] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.555163] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.555328] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.555776] NET: Registered protocol family 1
[ 0.559540] RPC: Registered named UNIX socket transport module.
[ 0.559578] RPC: Registered udp transport module.
[ 0.559605] RPC: Registered tcp transport module.
[ 0.559634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.559674] PCI: CLS 0 bytes, default 64
[ 0.560619] Unpacking initramfs...
[ 0.671106] Freeing initrd memory: 1076K
[ 0.681810] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.684975] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.686366] kvm [1]: IPA Size Limit: 40bits
[ 0.688314] kvm [1]: vgic-v2@fff20000
[ 0.688640] kvm [1]: GIC system register CPU interface enabled
[ 0.691111] kvm [1]: vgic interrupt IRQ10
[ 0.693338] kvm [1]: Hyp mode initialized successfully
[ 0.712310] Initialise system trusted keyrings
[ 0.713719] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.736985] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.740339] NFS: Registering the id_resolver key type
[ 0.740506] Key type id_resolver registered
[ 0.740535] Key type id_legacy registered
[ 0.740582] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.741150] 9p: Installing v9fs 9p2000 file system support
[ 0.793201] Key type asymmetric registered
[ 0.793383] Asymmetric key parser 'x509' registered
[ 0.793816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.793867] io scheduler mq-deadline registered
[ 0.793895] io scheduler kyber registered
[ 0.863521] EINJ: ACPI disabled.
[ 0.898778] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.898956] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.907624] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.907811] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.943952] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.951861] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.952504] serial serial0: tty port ttyS0 registered
[ 0.955002] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[ 1.053740] printk: console [ttyS2] enabled
[ 1.060186] SuperH (H)SCI(F) driver initialized
[ 1.063298] msm_serial: driver initialized
[ 1.068891] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.091161] loop: module loaded
[ 1.112378] libphy: Fixed MDIO Bus: probed
[ 1.114601] tun: Universal TUN/TAP device driver, 1.6
[ 1.120695] thunder_xcv, ver 1.0
[ 1.121533] thunder_bgx, ver 1.0
[ 1.122058] nicpf, ver 1.0
[ 1.124934] hclge is initializing
[ 1.125589] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.126257] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.127063] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.127604] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.128276] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.128916] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.129610] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.130333] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.132687] sky2: driver version 1.30
[ 1.136473] VFIO - User Level meta-driver version: 0.3
[ 1.144407] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
[ 1.157059] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 1.166092] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
[ 1.180500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.181203] ehci-pci: EHCI PCI platform driver
[ 1.181893] ehci-platform: EHCI generic platform driver
[ 1.185177] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.185922] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.188920] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 1.205388] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.207784] hub 1-0:1.0: USB hub found
[ 1.208220] hub 1-0:1.0: 1 port detected
[ 1.212208] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.212795] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 1.215640] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 1.229384] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.231812] hub 2-0:1.0: USB hub found
[ 1.232259] hub 2-0:1.0: 1 port detected
[ 1.234329] ehci-orion: EHCI orion driver
[ 1.235405] ehci-exynos: EHCI EXYNOS driver
[ 1.236265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.236962] ohci-pci: OHCI PCI platform driver
[ 1.237870] ohci-platform: OHCI generic platform driver
[ 1.238990] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.239661] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 1.243603] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 1.306973] hub 3-0:1.0: USB hub found
[ 1.307399] hub 3-0:1.0: 1 port detected
[ 1.309125] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.309896] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 1.311956] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 1.374894] hub 4-0:1.0: USB hub found
[ 1.375329] hub 4-0:1.0: 1 port detected
[ 1.377053] ohci-exynos: OHCI EXYNOS driver
[ 1.380273] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.380893] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 1.385943] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.386930] xhci-hcd xhci-hcd.0.auto: irq 223, io mem 0xfe800000
[ 1.389854] hub 5-0:1.0: USB hub found
[ 1.390290] hub 5-0:1.0: 1 port detected
[ 1.391730] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.392282] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 1.393009] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.393802] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.395977] hub 6-0:1.0: USB hub found
[ 1.396481] hub 6-0:1.0: 1 port detected
[ 1.398296] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.398877] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 1.404179] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.405331] xhci-hcd xhci-hcd.1.auto: irq 224, io mem 0xfe900000
[ 1.408155] hub 7-0:1.0: USB hub found
[ 1.408624] hub 7-0:1.0: 1 port detected
[ 1.410141] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.410698] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 1.411444] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.412200] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.414490] hub 8-0:1.0: USB hub found
[ 1.414930] hub 8-0:1.0: 1 port detected
[ 1.417897] usbcore: registered new interface driver usb-storage
[ 1.432936] i2c /dev entries driver
[ 1.448656] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.449713] fan53555-reg: supplied by vcc3v3_sys
[ 1.453906] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.454630] fan53555-reg: supplied by vcc3v3_sys
[ 1.458026] rk808 0-001b: chip id: 0x0
[ 1.466938] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.467677] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.468546] DCDC_REG1: supplied by vcc3v3_sys
[ 1.470710] DCDC_REG2: supplied by vcc3v3_sys
[ 1.472077] DCDC_REG3: supplied by vcc3v3_sys
[ 1.473030] DCDC_REG4: supplied by vcc3v3_sys
[ 1.474398] LDO_REG1: supplied by vcc3v3_sys
[ 1.476469] LDO_REG2: supplied by vcc3v3_sys
[ 1.478868] LDO_REG3: supplied by vcc3v3_sys
[ 1.480732] LDO_REG4: supplied by vcc3v3_sys
[ 1.482703] LDO_REG5: supplied by vcc3v3_sys
[ 1.484528] LDO_REG6: supplied by vcc3v3_sys
[ 1.486609] LDO_REG7: supplied by vcc3v3_sys
[ 1.488380] LDO_REG8: supplied by vcc3v3_sys
[ 1.490425] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.491483] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.523763] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[ 1.524876] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[ 1.527757] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[ 1.529200] random: fast init done
[ 1.529907] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[ 1.533668] sdhci: Secure Digital Host Controller Interface driver
[ 1.534223] sdhci: Copyright(c) Pierre Ossman
[ 1.535123] Synopsys Designware Multimedia Card Interface Driver
[ 1.536711] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.537625] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.538232] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.538774] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 1.539730] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.540257] mmc_host mmc0: card is non-removable.
[ 1.553936] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.568367] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.569258] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.569865] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.570407] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.571445] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[ 1.584901] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.599983] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.602054] mmc2: CQHCI version 5.10
[ 1.602508] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.604677] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.606787] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.610142] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.625339] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.628179] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.630163] usbcore: registered new interface driver usbhid
[ 1.630693] usbhid: USB HID core driver
[ 1.635180] NET: Registered protocol family 17
[ 1.635736] 9pnet: Installing 9P2000 support
[ 1.636154] Key type dns_resolver registered
[ 1.637006] registered taskstats version 1
[ 1.637383] Loading compiled-in X.509 certificates
[ 1.654134] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.654965] hctosys: unable to open rtc device (rtc0)
[ 1.656147] vcc1v8_s3: supplied by vcc_1v8
[ 1.656580] ALSA device list:
[ 1.656846] No soundcards found.
[ 1.657463] ttyS2 - failed to request DMA
[ 1.658227] Freeing unused kernel memory: 1408K
[ 1.666194] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.681147] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.685400] Run /init as init process
[ 1.753265] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 1.797596] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 199
[ 1.799461] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1.820002] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 223
[ 1.820645] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.822163] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[ 1.829347] mmcblk1: p1 p2
[ 1.956799] hub 7-1:1.0: USB hub found
[ 1.957578] hub 7-1:1.0: 4 ports detected
[ 2.051340] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 2.164716] hub 8-1:1.0: USB hub found
[ 2.165251] hub 8-1:1.0: 4 ports detected
[ 2.745422] usb 7-1.3: new high-speed USB device number 3 using xhci-hcd
[ 2.948801] hub 7-1.3:1.0: USB hub found
[ 2.949606] hub 7-1.3:1.0: 4 ports detected
[ 3.237422] usb 7-1.3.1: new low-speed USB device number 4 using xhci-hcd
[ 3.401637] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.1/7-1.3.1:1.0/0003:1BCF:0007.0001/input/input1
[ 3.403460] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.1/7-1.3.1:1.0/0003:1BCF:0007.0001/input/input2
[ 3.405005] hid-generic 0003:1BCF:0007.0001: input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-xhci-hcd.1.auto-1.3.1/input0
[ 3.485431] usb 7-1.3.4: new low-speed USB device number 5 using xhci-hcd
[ 3.687915] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.4/7-1.3.4:1.0/0003:1C4F:0002.0002/input/input3
[ 3.749845] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.3.4/input0
[ 3.753928] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.4/7-1.3.4:1.1/0003:1C4F:0002.0003/input/input4
[ 3.813983] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.4/7-1.3.4:1.1/0003:1C4F:0002.0003/input/input5
[ 3.815838] hid-generic 0003:1C4F:0002.0003: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.3.4/input1
[ 6.737729] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[ 7.014381] systemd[1]: System time before build time, advancing clock.
[ 7.298134] NET: Registered protocol family 10
[ 7.299209] Segment Routing with IPv6
[ 7.346717] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.348981] systemd[1]: Detected architecture arm64.
[ 7.358258] systemd[1]: Set hostname to <nanopi-m4>.
[ 7.446665] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 7.448178] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 7.546825] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.548051] systemd[1]: Created slice System Slice.
[ 7.549334] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.550152] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 7.551546] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.552616] systemd[1]: Created slice system-getty.slice.
[ 7.565837] systemd[1]: Listening on udev Kernel Socket.
[ 7.578140] systemd[1]: Created slice User and Session Slice.
[ 7.659920] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[ 8.042196] systemd-journald[1926]: Received request to flush runtime journal from PID 1
[ 8.077327] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[ 8.256529] rk808-rtc rk808-rtc: registered as rtc0
[ 8.446557] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 8.446568] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 8.446577] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 8.446585] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 8.628127] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 8.628221] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 8.628227] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 8.628232] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 8.628237] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 8.628267] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 8.628902] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 8.633972] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 8.634175] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 8.634182] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 8.634187] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 8.634190] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 8.634194] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 8.634197] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 8.634200] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 8.634226] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 8.634230] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 8.634233] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 8.778726] Bluetooth: Core ver 2.22
[ 8.778783] NET: Registered protocol family 31
[ 8.778791] Bluetooth: HCI device and connection manager initialized
[ 8.778800] Bluetooth: HCI socket layer initialized
[ 8.778804] Bluetooth: L2CAP socket layer initialized
[ 8.778816] Bluetooth: SCO socket layer initialized
[ 8.816654] libphy: stmmac: probed
[ 8.816667] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 8.816672] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 8.892739] Bluetooth: HCI UART driver ver 2.3
[ 8.892743] Bluetooth: HCI UART protocol H4 registered
[ 8.892788] Bluetooth: HCI UART protocol LL registered
[ 8.893027] Bluetooth: HCI UART protocol Broadcom registered
[ 8.913459] ttyS0 - failed to request DMA
[ 8.973304] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 8.973974] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 9.129915] Bluetooth: hci0: BCM: chip id 101
[ 9.130177] Bluetooth: hci0: BCM: features 0x2f
[ 9.131236] Bluetooth: hci0: BCM4354A2
[ 9.131248] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[ 9.187257] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.195168] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.251287] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[ 9.251610] rockchip-vop ff900000.vop: Adding to iommu group 2
[ 9.255824] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[ 9.257322] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[ 9.257397] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 9.257958] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[ 9.257963] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.257965] [drm] No driver support for vblank timestamp query.
[ 9.325351] Console: switching to colour frame buffer device 240x67
[ 9.361335] rockchip-drm display-subsystem: fb0: frame buffer device
[ 9.385673] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 9.393589] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 9.402518] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.friendlyarm,nanopi-m4.txt failed with error -2
[ 9.469908] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.472739] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 9.472777] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 9.473073] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: May 14 2014 19:51:52 version 7.35.17 (r477908) FWID 01-2ed3ee81
[ 9.482304] random: crng init done
[ 9.482311] random: 7 urandom warning(s) missed due to ratelimiting
[ 9.682570] rk_gmac-dwmac fe300000.ethernet eth0: device MAC address 12:19:5d:05:04:1c
[ 9.682746] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 9.693306] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 9.693321] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 9.981953] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[ 13.774115] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 13.774486] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
@blkf2016
Copy link

Hi，could you share your kernel config and dts file？ I have a nanopi-m4, But the mainline kernel I compiled always hangs at startup.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment