fbtft_framebuffer_kernellog_4.14.14.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.14-h5 (alex@svn) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11)) #1 SMP Sun Jan 21 19:37:27 -02 2018
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: FriendlyArm NanoPi NEO Plus2
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 262144 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 21 pages/cpu @ffff80003ef79000 s46232 r8192 d31592 u86016
[    0.000000] pcpu-alloc: s46232 r8192 d31592 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 14792(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 1000096K/1048576K available (8126K kernel code, 646K rwdata, 2748K rodata, 448K init, 398K bss, 32096K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008870000   (  8128 KB)
[    0.000000]     .rodata : 0xffff000008870000 - 0xffff000008b30000   (  2816 KB)
[    0.000000]       .init : 0xffff000008b30000 - 0xffff000008ba0000   (   448 KB)
[    0.000000]       .data : 0xffff000008ba0000 - 0xffff000008c41808   (   647 KB)
[    0.000000]        .bss : 0xffff000008c41808 - 0xffff000008ca51e8   (   399 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000147] Console: colour dummy device 80x25
[    0.000175] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000187] pid_max: default: 32768 minimum: 301
[    0.000286] Security Framework initialized
[    0.000298] AppArmor: AppArmor disabled by boot time parameter
[    0.000347] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000363] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001537] ASID allocator initialised with 65536 entries
[    0.001606] Hierarchical SRCU implementation.
[    0.001999] smp: Bringing up secondary CPUs ...
[    0.002958] Detected VIPT I-cache on CPU1
[    0.003012] CPU1: Booted secondary processor [410fd034]
[    0.003671] Detected VIPT I-cache on CPU2
[    0.003699] CPU2: Booted secondary processor [410fd034]
[    0.004374] Detected VIPT I-cache on CPU3
[    0.004401] CPU3: Booted secondary processor [410fd034]
[    0.004465] smp: Brought up 1 node, 4 CPUs
[    0.004486] SMP: Total of 4 processors activated.
[    0.004494] CPU features: detected feature: 32-bit EL0 Support
[    0.004604] CPU: All CPU(s) started at EL2
[    0.004626] alternatives: patching kernel code
[    0.005540] devtmpfs: initialized
[    0.010492] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.010513] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.011274] pinctrl core: initialized pinctrl subsystem
[    0.011996] NET: Registered protocol family 16
[    0.012800] cpuidle: using governor menu
[    0.013407] vdso: 2 pages (1 code @ ffff000008876000, 1 data @ ffff000008ba4000)
[    0.013425] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.014344] DMA: preallocated 256 KiB pool for atomic allocations
[    0.014410] Serial: AMBA PL011 UART driver
[    0.025855] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.026928] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    0.027046] gpio-regulator gpio-regulator: could not find pctldev for node /soc/pinctrl@01f02c00/regulator_pins@0, deferring probe
[    0.027387] SCSI subsystem initialized
[    0.027566] usbcore: registered new interface driver usbfs
[    0.027604] usbcore: registered new interface driver hub
[    0.027659] usbcore: registered new device driver usb
[    0.027868] pps_core: LinuxPPS API ver. 1 registered
[    0.027874] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.027890] PTP clock support registered
[    0.028161] Advanced Linux Sound Architecture Driver Initialized.
[    0.028999] clocksource: Switched to clocksource arch_sys_counter
[    0.029216] VFS: Disk quotas dquot_6.6.0
[    0.029274] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.029395] FS-Cache: Loaded
[    0.029563] CacheFiles: Loaded
[    0.035391] NET: Registered protocol family 2
[    0.035850] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.035936] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.036112] TCP: Hash tables configured (established 8192 bind 8192)
[    0.036239] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.036273] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.036454] NET: Registered protocol family 1
[    0.036805] RPC: Registered named UNIX socket transport module.
[    0.036812] RPC: Registered udp transport module.
[    0.036818] RPC: Registered tcp transport module.
[    0.036823] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.037042] Unpacking initramfs...
[    0.089741] Freeing initrd memory: 1076K
[    0.094142] audit: initializing netlink subsys (disabled)
[    0.094264] audit: type=2000 audit(0.092:1): state=initialized audit_enabled=0 res=1
[    0.094482] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.100914] FS-Cache: Netfs 'nfs' registered for caching
[    0.101372] NFS: Registering the id_resolver key type
[    0.101403] Key type id_resolver registered
[    0.101408] Key type id_legacy registered
[    0.101423] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.101429] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.106944] NET: Registered protocol family 38
[    0.107216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.107306] io scheduler noop registered
[    0.107313] io scheduler deadline registered
[    0.107506] io scheduler cfq registered (default)
[    0.107513] io scheduler mq-deadline registered
[    0.107519] io scheduler kyber registered
[    0.108053] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.109848] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.112778] sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.118376] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.119453] console [ttyS0] disabled
[    0.139601] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a U6_16550A
[    0.883848] console [ttyS0] enabled
[    0.910043] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 32, base_baud = 1500000) is a U6_16550A
[    0.939511] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.949517] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.959760] loop: module loaded
[    0.964520] libphy: Fixed MDIO Bus: probed
[    0.969599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.976128] ehci-platform: EHCI generic platform driver
[    0.981504] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.987097] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.995288] ehci-platform 1c1a000.usb: irq 13, io mem 0x01c1a000
[    1.017002] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    1.023810] hub 1-0:1.0: USB hub found
[    1.027605] hub 1-0:1.0: 1 port detected
[    1.032134] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.038332] ohci-platform: OHCI generic platform driver
[    1.043727] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.050362] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    1.058328] ohci-platform 1c1a400.usb: irq 14, io mem 0x01c1a400
[    1.125596] hub 2-0:1.0: USB hub found
[    1.129387] hub 2-0:1.0: 1 port detected
[    1.133952] usbcore: registered new interface driver cdc_acm
[    1.139621] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.147660] usbcore: registered new interface driver uas
[    1.153046] usbcore: registered new interface driver usb-storage
[    1.159563] mousedev: PS/2 mouse device common for all mice
[    1.165406] ads7846 spi0.1: spi0.1 supply vcc not found, using dummy regulator
[    1.172958] ads7846 spi0.1: touchscreen, irq 146
[    1.178010] input: ADS7846 Touchscreen as /devices/platform/soc/1c68000.spi/spi_master/spi0/spi0.1/input/input0
[    1.188604] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    1.195395] sun6i-rtc 1f00000.rtc: RTC enabled
[    1.199897] i2c /dev entries driver
[    1.205063] thermal thermal_zone0: failed to read out thermal zone (-16)
[    1.212393] sdhci: Secure Digital Host Controller Interface driver
[    1.218576] sdhci: Copyright(c) Pierre Ossman
[    1.222966] Synopsys Designware Multimedia Card Interface Driver
[    1.230088] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.273152] sunxi-mmc 1c0f000.mmc: base:0xffff000008ced000 irq:9
[    1.279934] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.331815] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.345542] mmc0: new high speed SDHC card at address aaaa
[    1.351481] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    1.357137]  mmcblk0: p1 p2
[    1.533021] sunxi-mmc 1c10000.mmc: base:0xffff000008cfd000 irq:10
[    1.566591] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.575039] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.577022] sunxi-mmc 1c11000.mmc: base:0xffff000008d0d000 irq:11
[    1.577282] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.592288] ledtrig-cpu: registered to indicate activity on CPUs
[    1.598525] hidraw: raw HID events driver (C) Jiri Kosina
[    1.604148] usbcore: registered new interface driver usbhid
[    1.609735] usbhid: USB HID core driver
[    1.613659] fbtft_of_value: buswidth = 8
[    1.617595] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.623095] fbtft_of_value: debug = 0
[    1.626772] fbtft_of_value: rotate = 90
[    1.630622] fbtft_of_value: fps = 50
[    1.634206] fbtft_of_value: txbuflen = 32768
[    1.640853] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.678100] mmc2: new high speed MMC card at address 0001
[    1.683991] mmcblk2: mmc2:0001 8WPD3R 7.28 GiB 
[    1.688772] mmcblk2boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB
[    1.694928] mmcblk2boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB
[    1.701927]  mmcblk2: p1 p2
[    1.787618] Console: switching to colour frame buffer device 40x30
[    1.794536] graphics fb0: fb_st7789v frame buffer, 320x240, 150 KiB video memory, 32 KiB buffer memory, fps=50, spi0.0 at 50 MHz
[    1.807284] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[    1.815223] sun4i-codec 1c22c00.codec: Failed to register our card
[    1.815931] mmc1: new high speed SDIO card at address 0001
[    1.828084] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.833815] NET: Registered protocol family 10
[    1.843656] Segment Routing with IPv6
[    1.847403] NET: Registered protocol family 17
[    1.852407] rfkill_gpio rfkill_bt: sunxi-bt device registered.
[    1.858322] 9pnet: Installing 9P2000 support
[    1.862643] Key type dns_resolver registered
[    1.867552] registered taskstats version 1
[    1.872187] Key type encrypted registered
[    1.882439] sun8i-emac 1c30000.ethernet: PHY regulator found
[    1.888923] ehci-platform 1c1b000.usb: EHCI Host Controller
[    1.894520] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    1.902584] ehci-platform 1c1b000.usb: irq 15, io mem 0x01c1b000
[    1.921002] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    1.927705] hub 3-0:1.0: USB hub found
[    1.931493] hub 3-0:1.0: 1 port detected
[    1.935970] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.941568] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    1.949527] ehci-platform 1c1c000.usb: irq 17, io mem 0x01c1c000
[    1.969012] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.975611] hub 4-0:1.0: USB hub found
[    1.979390] hub 4-0:1.0: 1 port detected
[    1.983835] ehci-platform 1c1d000.usb: EHCI Host Controller
[    1.989424] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    1.997374] ehci-platform 1c1d000.usb: irq 19, io mem 0x01c1d000
[    2.017012] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    2.023616] hub 5-0:1.0: USB hub found
[    2.027395] hub 5-0:1.0: 1 port detected
[    2.031829] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    2.038461] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    2.046416] ohci-platform 1c1b400.usb: irq 16, io mem 0x01c1b400
[    2.113510] hub 6-0:1.0: USB hub found
[    2.117294] hub 6-0:1.0: 1 port detected
[    2.121734] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    2.128363] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    2.136315] ohci-platform 1c1c400.usb: irq 18, io mem 0x01c1c400
[    2.205502] hub 7-0:1.0: USB hub found
[    2.209281] hub 7-0:1.0: 1 port detected
[    2.213710] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    2.220339] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    2.228308] ohci-platform 1c1d400.usb: irq 20, io mem 0x01c1d400
[    2.297533] hub 8-0:1.0: USB hub found
[    2.301313] hub 8-0:1.0: 1 port detected
[    2.305789] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    2.316746] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.322503] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9
[    2.330851] hub 9-0:1.0: USB hub found
[    2.334639] hub 9-0:1.0: 1 port detected
[    2.341874] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    2.350220] input: r-gpio-keys as /devices/platform/r-gpio-keys/input/input1
[    2.357688] gmac-3v3: disabling
[    2.360826] ALSA device list:
[    2.363804]   #0: H3 Audio Codec
[    2.367541] Freeing unused kernel memory: 448K
[    2.498208] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    2.507183] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.532668] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    2.938355] systemd[1]: System time before build time, advancing clock.
[    3.053126] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.072307] systemd[1]: Detected architecture arm64.
[    3.094468] systemd[1]: Set hostname to <nanopi-neo-plus2>.
[    3.472139] systemd[1]: Listening on Journal Socket.
[    3.489474] systemd[1]: Reached target Swap.
[    3.506005] systemd[1]: Listening on Journal Audit Socket.
[    3.525775] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    3.554779] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.581547] systemd[1]: Listening on fsck to fsckd communication Socket.
[    3.601543] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.910278] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    4.364908] systemd-journald[214]: Received request to flush runtime journal from PID 1
[    4.750675] lirc_dev: IR Remote Control driver registered, major 245
[    4.760857] IR LIRC bridge handler initialized
[    4.761821] Registered IR keymap rc-empty
[    4.761988] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
[    4.762154] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input2
[    4.762714] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[    4.762861] sunxi-ir 1f02000.ir: initialized sunXi IR driver
[    4.807658] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[    4.948504] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct  8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3
[    4.949394] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.1.6 Inc Compiler: 1.29.4 Inc ClmImport: 1.29.13 Creation: 2016-09-21 14:40:59 
[    5.152395] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    5.673510] libphy: 1c30000.ethernet: probed
[    5.681372] RTL8211E Gigabit Ethernet 1c30000.ethernet-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=1c30000.ethernet-0:00, irq=POLL)
[    5.681395] sun8i-emac 1c30000.ethernet: device MAC address slot 0 02:01:36:dd:1d:e9
[    5.689823] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[    5.689922] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[    5.689931] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
[    5.689946] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.773937] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    5.773955] brcmfmac: power management disabled
[    6.671456] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[    6.689055] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[    6.695950] rtc-ds1307: probe of 0-0068 failed with error -110
[    8.367829] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[    8.367841] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
[   43.229264] random: crng init done
[ 2276.363912] usb 2-1: new low-speed USB device number 2 using ohci-platform
[ 2276.613504] input: USB USB Keykoard as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.0/0003:1C4F:0002.0001/input/input3
[ 2276.678092] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-1c1a400.usb-1/input0
[ 2276.696696] input: USB USB Keykoard as /devices/platform/soc/1c1a400.usb/usb2/2-1/2-1:1.1/0003:1C4F:0002.0002/input/input4
[ 2276.756749] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-1c1a400.usb-1/input1
[ 2415.317071] fb_st7789v spi0.0: fbtft_update_display: start_line=239 is larger than end_line=0. Shouldn't happen, will do full display update
[ 2577.155947] fb_st7789v spi0.0: fbtft_update_display: start_line=239 is larger than end_line=0. Shouldn't happen, will do full display update