Skip to content

Instantly share code, notes, and snippets.

@avafinger

avafinger/bootlog_5.3.1.txt

Last active September 22, 2019 22:50
Show Gist options
  • Save avafinger/28d976dbe48bc92580efba3fffc37078 to your computer and use it in GitHub Desktop.
Save avafinger/28d976dbe48bc92580efba3fffc37078 to your computer and use it in GitHub Desktop.
Download ZIP
Mainline Kernel 5.3.1 NanoPi M4 - RK3399
Raw
bootlog_5.3.1.txt
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.3.1 (ubuntu@nanopi-m4) (gcc version 9.2.1 20190905 (Ubuntu 9.2.1-7ubuntu2)) #1 SMP PREEMPT Sun Sep 22 20:54:57 UTC 2019
[ 0.000000] Machine model: FriendlyElec NanoPi M4
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x000000007e000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7da84840-0x7da85fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 523776
[ 0.000000] DMA32 zone: 8184 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 523776 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56728 r8192 d29288 u94208
[ 0.000000] pcpu-alloc: s56728 r8192 d29288 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1994140K/2095104K available (11324K kernel code, 1786K rwdata, 5992K rodata, 4992K init, 445K bss, 68196K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x000000007b040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b050000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x300/0x494 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.003879] Console: colour dummy device 80x25
[ 0.005198] printk: console [tty0] enabled
[ 0.005377] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.005436] pid_max: default: 32768 minimum: 301
[ 0.005639] LSM: Security Framework initializing
[ 0.005787] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.005848] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.031977] ASID allocator initialised with 32768 entries
[ 0.039975] rcu: Hierarchical SRCU implementation.
[ 0.048160] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.048713] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.056816] EFI services will not be available.
[ 0.061728] smp: Bringing up secondary CPUs ...
[ 0.094021] Detected VIPT I-cache on CPU1
[ 0.094070] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.094090] GICv3: CPU1: using allocated LPI pending table @0x000000007b060000
[ 0.094147] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.126143] Detected VIPT I-cache on CPU2
[ 0.126185] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.126202] GICv3: CPU2: using allocated LPI pending table @0x000000007b070000
[ 0.126246] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.158293] Detected VIPT I-cache on CPU3
[ 0.158333] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.158351] GICv3: CPU3: using allocated LPI pending table @0x000000007b100000
[ 0.158393] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.193114] CPU features: detected: EL2 vector hardening
[ 0.193427] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.193822] Detected PIPT I-cache on CPU4
[ 0.195047] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.195503] GICv3: CPU4: using allocated LPI pending table @0x000000007b110000
[ 0.196655] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.236839] Detected PIPT I-cache on CPU5
[ 0.237997] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.238425] GICv3: CPU5: using allocated LPI pending table @0x000000007b120000
[ 0.239446] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.244623] smp: Brought up 1 node, 6 CPUs
[ 0.245227] SMP: Total of 6 processors activated.
[ 0.245274] CPU features: detected: 32-bit EL0 Support
[ 0.245318] CPU features: detected: CRC32 instructions
[ 0.259885] CPU: All CPU(s) started at EL2
[ 0.260612] alternatives: patching kernel code
[ 0.265628] devtmpfs: initialized
[ 0.290141] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.290321] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.293686] pinctrl core: initialized pinctrl subsystem
[ 0.297768] DMI not present or invalid.
[ 0.298698] NET: Registered protocol family 16
[ 0.302348] audit: initializing netlink subsys (disabled)
[ 0.302930] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1
[ 0.307005] cpuidle: using governor menu
[ 0.308003] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.322450] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.326689] Serial: AMBA PL011 UART driver
[ 0.416475] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.416605] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.416644] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.416681] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.437760] cryptd: max_cpu_qlen set to 1000
[ 0.472117] ACPI: Interpreter disabled.
[ 0.478608] vcc5v0_core: supplied by vdd_5v
[ 0.478972] vcc5v0_sys: supplied by vdd_5v
[ 0.479109] vbus_typec: supplied by vdd_5v
[ 0.479457] vcc5v0_usb1: supplied by vcc5v0_sys
[ 0.479770] vcc3v3_sys: supplied by vcc5v0_core
[ 0.479885] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.480269] vcc5v0_usb2: supplied by vcc5v0_sys
[ 0.488699] vgaarb: loaded
[ 0.489730] SCSI subsystem initialized
[ 0.491425] libata version 3.00 loaded.
[ 0.491932] usbcore: registered new interface driver usbfs
[ 0.492046] usbcore: registered new interface driver hub
[ 0.492500] usbcore: registered new device driver usb
[ 0.495318] pps_core: LinuxPPS API ver. 1 registered
[ 0.495357] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.495424] PTP clock support registered
[ 0.495843] EDAC MC: Ver: 3.0.0
[ 0.500271] FPGA manager framework
[ 0.500537] Advanced Linux Sound Architecture Driver Initialized.
[ 0.503568] clocksource: Switched to clocksource arch_sys_counter
[ 0.504253] VFS: Disk quotas dquot_6.6.0
[ 0.504406] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.504958] pnp: PnP ACPI: disabled
[ 0.518832] thermal_sys: Registered thermal governor 'step_wise'
[ 0.518864] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.520285] NET: Registered protocol family 2
[ 0.521413] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.521534] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.521903] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.522494] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.522806] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.522953] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.524568] NET: Registered protocol family 1
[ 0.527544] RPC: Registered named UNIX socket transport module.
[ 0.527603] RPC: Registered udp transport module.
[ 0.527632] RPC: Registered tcp transport module.
[ 0.527659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.527700] PCI: CLS 0 bytes, default 64
[ 0.528600] Unpacking initramfs...
[ 0.649250] Freeing initrd memory: 1128K
[ 0.660499] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.662939] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.664307] kvm [1]: IPA Size Limit: 40bits
[ 0.666355] kvm [1]: vgic-v2@fff20000
[ 0.666542] kvm [1]: GIC system register CPU interface enabled
[ 0.669942] kvm [1]: vgic interrupt IRQ10
[ 0.672022] kvm [1]: Hyp mode initialized successfully
[ 0.696957] Initialise system trusted keyrings
[ 0.697905] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.714317] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.717368] NFS: Registering the id_resolver key type
[ 0.717481] Key type id_resolver registered
[ 0.717511] Key type id_legacy registered
[ 0.717553] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.761155] Key type asymmetric registered
[ 0.761219] Asymmetric key parser 'x509' registered
[ 0.761348] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.761394] io scheduler mq-deadline registered
[ 0.761423] io scheduler kyber registered
[ 0.818556] EINJ: ACPI disabled.
[ 0.837517] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.837630] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.840842] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.840903] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.868938] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.874376] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.874816] serial serial0: tty port ttyS0 registered
[ 0.876510] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[ 0.974073] printk: console [ttyS2] enabled
[ 0.979091] SuperH (H)SCI(F) driver initialized
[ 0.981870] msm_serial: driver initialized
[ 0.986395] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.003841] loop: module loaded
[ 1.020425] libphy: Fixed MDIO Bus: probed
[ 1.021504] tun: Universal TUN/TAP device driver, 1.6
[ 1.025659] thunder_xcv, ver 1.0
[ 1.026064] thunder_bgx, ver 1.0
[ 1.026445] nicpf, ver 1.0
[ 1.029105] hclge is initializing
[ 1.029427] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.030092] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.030749] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.031339] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.031961] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.032600] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.033214] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.033934] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.035763] sky2: driver version 1.30
[ 1.038711] VFIO - User Level meta-driver version: 0.3
[ 1.051706] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 1.068611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.069304] ehci-pci: EHCI PCI platform driver
[ 1.069793] ehci-platform: EHCI generic platform driver
[ 1.073242] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.073841] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.074951] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 1.091489] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.094141] hub 1-0:1.0: USB hub found
[ 1.094563] hub 1-0:1.0: 1 port detected
[ 1.098155] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.098713] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 1.099750] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 1.115516] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.117298] hub 2-0:1.0: USB hub found
[ 1.117703] hub 2-0:1.0: 1 port detected
[ 1.119186] ehci-orion: EHCI orion driver
[ 1.120171] ehci-exynos: EHCI EXYNOS driver
[ 1.120883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.121549] ohci-pci: OHCI PCI platform driver
[ 1.122082] ohci-platform: OHCI generic platform driver
[ 1.123160] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.123940] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 1.124986] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 1.189191] hub 3-0:1.0: USB hub found
[ 1.189614] hub 3-0:1.0: 1 port detected
[ 1.191068] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.191762] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 1.192729] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 1.256554] hub 4-0:1.0: USB hub found
[ 1.256976] hub 4-0:1.0: 1 port detected
[ 1.258368] ohci-exynos: OHCI EXYNOS driver
[ 1.260956] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.261538] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 1.262531] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.263562] xhci-hcd xhci-hcd.0.auto: irq 225, io mem 0xfe800000
[ 1.266234] hub 5-0:1.0: USB hub found
[ 1.266659] hub 5-0:1.0: 1 port detected
[ 1.267861] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.268397] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 1.269122] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.269891] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.271696] hub 6-0:1.0: USB hub found
[ 1.272108] hub 6-0:1.0: 1 port detected
[ 1.273357] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.273907] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 1.274863] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.276022] xhci-hcd xhci-hcd.1.auto: irq 226, io mem 0xfe900000
[ 1.278096] hub 7-0:1.0: USB hub found
[ 1.278506] hub 7-0:1.0: 1 port detected
[ 1.279687] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.280223] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 1.280946] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.281664] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.283484] hub 8-0:1.0: USB hub found
[ 1.283896] hub 8-0:1.0: 1 port detected
[ 1.286038] usbcore: registered new interface driver usb-storage
[ 1.297543] i2c /dev entries driver
[ 1.307187] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.308030] fan53555-reg: supplied by vcc3v3_sys
[ 1.310990] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.311755] fan53555-reg: supplied by vcc3v3_sys
[ 1.314573] rk808 0-001b: chip id: 0x0
[ 1.322296] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.322970] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.324027] DCDC_REG1: supplied by vcc3v3_sys
[ 1.326065] DCDC_REG2: supplied by vcc3v3_sys
[ 1.327422] DCDC_REG3: supplied by vcc3v3_sys
[ 1.328238] DCDC_REG4: supplied by vcc3v3_sys
[ 1.329435] LDO_REG1: supplied by vcc3v3_sys
[ 1.331533] LDO_REG2: supplied by vcc3v3_sys
[ 1.333162] LDO_REG3: supplied by vcc3v3_sys
[ 1.334982] LDO_REG4: supplied by vcc3v3_sys
[ 1.336852] LDO_REG5: supplied by vcc3v3_sys
[ 1.338489] LDO_REG6: supplied by vcc3v3_sys
[ 1.340313] LDO_REG7: supplied by vcc3v3_sys
[ 1.342004] LDO_REG8: supplied by vcc3v3_sys
[ 1.343807] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.344786] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.370545] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[ 1.372088] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[ 1.375942] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[ 1.377630] random: fast init done
[ 1.378299] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[ 1.381891] sdhci: Secure Digital Host Controller Interface driver
[ 1.382442] sdhci: Copyright(c) Pierre Ossman
[ 1.383290] Synopsys Designware Multimedia Card Interface Driver
[ 1.384626] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.385281] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.385883] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.386429] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 1.387396] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.387922] mmc_host mmc0: card is non-removable.
[ 1.399496] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.413401] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.414066] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.414669] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.415219] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 1.416224] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[ 1.429875] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.444511] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.446334] mmc2: CQHCI version 5.10
[ 1.448609] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.450840] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.453267] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.456735] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.471879] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.474723] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.476509] usbcore: registered new interface driver usbhid
[ 1.477033] usbhid: USB HID core driver
[ 1.482348] NET: Registered protocol family 17
[ 1.482838] Key type dns_resolver registered
[ 1.483968] registered taskstats version 1
[ 1.484345] Loading compiled-in X.509 certificates
[ 1.502572] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.503446] hctosys: unable to open rtc device (rtc0)
[ 1.504640] vcc1v8_s3: supplied by vcc_1v8
[ 1.505102] ALSA device list:
[ 1.505377] No soundcards found.
[ 1.505864] ttyS2 - failed to request DMA
[ 1.507967] Freeing unused kernel memory: 4992K
[ 1.520010] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.523078] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.523336] Run /init as init process
[ 1.611456] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 1.656307] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 182
[ 1.659447] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1.791171] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 216
[ 1.791832] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.793432] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[ 1.796338] mmcblk1: p1 p2
[ 1.826106] hub 7-1:1.0: USB hub found
[ 1.826703] hub 7-1:1.0: 4 ports detected
[ 1.889760] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 2.034294] hub 8-1:1.0: USB hub found
[ 2.034983] hub 8-1:1.0: 4 ports detected
[ 2.603439] usb 7-1.3: new high-speed USB device number 3 using xhci-hcd
[ 2.818296] hub 7-1.3:1.0: USB hub found
[ 2.819095] hub 7-1.3:1.0: 4 ports detected
[ 3.107438] usb 7-1.3.1: new low-speed USB device number 4 using xhci-hcd
[ 3.301493] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.1/7-1.3.1:1.0/0003:1C4F:0002.0001/input/input1
[ 3.359855] hid-generic 0003:1C4F:0002.0001: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.3.1/input0
[ 3.364770] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.1/7-1.3.1:1.1/0003:1C4F:0002.0002/input/input2
[ 3.423788] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.1/7-1.3.1:1.1/0003:1C4F:0002.0002/input/input3
[ 3.425568] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.3.1/input1
[ 3.507438] usb 7-1.3.4: new low-speed USB device number 5 using xhci-hcd
[ 3.654366] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.4/7-1.3.4:1.0/0003:1BCF:0007.0003/input/input4
[ 3.655998] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.3/7-1.3.4/7-1.3.4:1.0/0003:1BCF:0007.0003/input/input5
[ 3.657633] hid-generic 0003:1BCF:0007.0003: input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-xhci-hcd.1.auto-1.3.4/input0
[ 6.572478] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[ 6.889854] systemd[1]: System time before build time, advancing clock.
[ 7.212865] NET: Registered protocol family 10
[ 7.213722] Segment Routing with IPv6
[ 7.260204] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 7.262338] systemd[1]: Detected architecture arm64.
[ 7.273926] systemd[1]: Set hostname to <nanopi-m4>.
[ 7.275258] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 7.444785] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 7.446277] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 7.586239] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.590054] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.591426] systemd[1]: Created slice User and Session Slice.
[ 7.603553] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.604879] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.615699] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 7.627585] systemd[1]: Reached target Remote File Systems.
[ 7.802829] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[ 7.807458] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[ 8.238832] systemd-journald[257]: Received request to flush runtime journal from PID 1
[ 8.363630] rk808-rtc rk808-rtc: registered as rtc0
[ 8.497369] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 8.497384] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 8.497394] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 8.497405] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 8.822348] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 8.822410] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 8.822414] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 8.822416] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 8.822420] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 8.822439] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 8.823055] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 8.828067] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 8.828219] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 8.828223] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 8.828226] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 8.828228] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 8.828230] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 8.828232] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 8.828234] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 8.828257] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 8.828260] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 8.828262] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 8.828268] rk_gmac-dwmac fe300000.ethernet: device MAC address e6:c4:2a:63:64:49
[ 8.887260] libphy: stmmac: probed
[ 9.012854] Bluetooth: Core ver 2.22
[ 9.012890] NET: Registered protocol family 31
[ 9.012892] Bluetooth: HCI device and connection manager initialized
[ 9.012899] Bluetooth: HCI socket layer initialized
[ 9.012904] Bluetooth: L2CAP socket layer initialized
[ 9.012910] Bluetooth: SCO socket layer initialized
[ 9.023325] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 9.024032] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 9.153918] panfrost ff9a0000.gpu: clock rate = 500000000
[ 9.154183] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 9.154190] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[ 9.154195] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 9.154199] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 9.155564] [drm] Initialized panfrost 1.0.0 20180908 for ff9a0000.gpu on minor 0
[ 9.195106] Bluetooth: HCI UART driver ver 2.3
[ 9.195110] Bluetooth: HCI UART protocol H4 registered
[ 9.195139] Bluetooth: HCI UART protocol LL registered
[ 9.195358] Bluetooth: HCI UART protocol Broadcom registered
[ 9.215377] ttyS0 - failed to request DMA
[ 9.310965] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[ 9.311227] rockchip-vop ff900000.vop: Adding to iommu group 2
[ 9.314984] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[ 9.316522] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[ 9.316620] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 9.317271] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[ 9.317276] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.317278] [drm] No driver support for vblank timestamp query.
[ 9.385676] Console: switching to colour frame buffer device 240x67
[ 9.425507] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[ 9.432387] Bluetooth: hci0: BCM: chip id 101
[ 9.432695] Bluetooth: hci0: BCM: features 0x2f
[ 9.433721] Bluetooth: hci0: BCM4354A2
[ 9.433725] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[ 9.459642] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[ 9.516420] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.741744] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
[ 9.741751] rk_gmac-dwmac fe300000.ethernet eth0: phy: setting supported 00,00000000,000062ff advertising 00,00000000,000062ff
[ 9.751357] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 9.751367] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 9.751374] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[ 9.751379] rk_gmac-dwmac fe300000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/Unknown/Unknown adv=00,00000000,000062ff pause=10 link=0 an=1
[ 9.752689] rk_gmac-dwmac fe300000.ethernet eth0: phy link down rgmii/Unknown/Unknown
[ 10.163925] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[ 11.773360] random: crng init done
[ 11.773369] random: 7 urandom warning(s) missed due to ratelimiting
[ 12.111650] rk_gmac-dwmac fe300000.ethernet eth0: phy link up rgmii/1Gbps/Full
[ 12.111723] rk_gmac-dwmac fe300000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/1Gbps/Full adv=00,00000000,00000000 pause=0f link=1 an=0
[ 12.111744] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 12.111760] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment