avafinger/NanoPi NEO Plus2 with kernel 4.14.3

## NanoPi NEO Plus2 with kernel 4.14.3
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.3-h5 (alex@svn) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Dec 5 09:32:37 -02 2017
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] Machine model: FriendlyArm NanoPi NEO Plus2
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] On node 0 totalpages: 262144
[    0.000000]   DMA zone: 4096 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 262144 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] random: fast init done
[    0.000000] percpu: Embedded 21 pages/cpu @ffff80003ef7c000 s46232 r8192 d31592 u86016
[    0.000000] pcpu-alloc: s46232 r8192 d31592 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10
[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
[    0.000000] log_buf_len min size: 16384 bytes
[    0.000000] log_buf_len: 32768 bytes
[    0.000000] early log buf free: 14796(90%)
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Memory: 1000164K/1048576K available (8126K kernel code, 644K rwdata, 2740K rodata, 448K init, 408K bss, 32028K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffff000000000000 - 0xffff000008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000   (129022 GB)
[    0.000000]       .text : 0xffff000008080000 - 0xffff000008870000   (  8128 KB)
[    0.000000]     .rodata : 0xffff000008870000 - 0xffff000008b20000   (  2752 KB)
[    0.000000]       .init : 0xffff000008b20000 - 0xffff000008b90000   (   448 KB)
[    0.000000]       .data : 0xffff000008b90000 - 0xffff000008c31008   (   645 KB)
[    0.000000]        .bss : 0xffff000008c31008 - 0xffff000008c97268   (   409 KB)
[    0.000000]     fixed   : 0xffff7dfffe7fd000 - 0xffff7dfffec00000   (  4108 KB)
[    0.000000]     PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000   (    16 MB)
[    0.000000]     vmemmap : 0xffff7e0000000000 - 0xffff800000000000   (  2048 GB maximum)
[    0.000000]               0xffff7e0000000000 - 0xffff7e0001000000   (    16 MB actual)
[    0.000000]     memory  : 0xffff800000000000 - 0xffff800040000000   (  1024 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000149] Console: colour dummy device 80x25
[    0.000176] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000188] pid_max: default: 32768 minimum: 301
[    0.000288] Security Framework initialized
[    0.000301] AppArmor: AppArmor disabled by boot time parameter
[    0.000350] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000366] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001546] ASID allocator initialised with 65536 entries
[    0.001614] Hierarchical SRCU implementation.
[    0.002008] smp: Bringing up secondary CPUs ...
[    0.002944] Detected VIPT I-cache on CPU1
[    0.003000] CPU1: Booted secondary processor [410fd034]
[    0.003659] Detected VIPT I-cache on CPU2
[    0.003688] CPU2: Booted secondary processor [410fd034]
[    0.004369] Detected VIPT I-cache on CPU3
[    0.004395] CPU3: Booted secondary processor [410fd034]
[    0.004459] smp: Brought up 1 node, 4 CPUs
[    0.004480] SMP: Total of 4 processors activated.
[    0.004488] CPU features: detected feature: 32-bit EL0 Support
[    0.004599] CPU: All CPU(s) started at EL2
[    0.004620] alternatives: patching kernel code
[    0.005539] devtmpfs: initialized
[    0.010260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.010279] futex hash table entries: 1024 (order: 5, 131072 bytes)
[    0.011035] pinctrl core: initialized pinctrl subsystem
[    0.011717] NET: Registered protocol family 16
[    0.012535] cpuidle: using governor menu
[    0.013131] vdso: 2 pages (1 code @ ffff000008876000, 1 data @ ffff000008b94000)
[    0.013147] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.014053] DMA: preallocated 256 KiB pool for atomic allocations
[    0.014119] Serial: AMBA PL011 UART driver
[    0.025549] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.026658] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc/pinctrl@01c20800/gmac_power_pin@0, deferring probe
[    0.026777] gpio-regulator gpio-regulator: could not find pctldev for node /soc/pinctrl@01f02c00/regulator_pins@0, deferring probe
[    0.027118] SCSI subsystem initialized
[    0.027292] usbcore: registered new interface driver usbfs
[    0.027329] usbcore: registered new interface driver hub
[    0.027381] usbcore: registered new device driver usb
[    0.027595] pps_core: LinuxPPS API ver. 1 registered
[    0.027601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.027617] PTP clock support registered
[    0.027863] Advanced Linux Sound Architecture Driver Initialized.
[    0.028687] clocksource: Switched to clocksource arch_sys_counter
[    0.028909] VFS: Disk quotas dquot_6.6.0
[    0.028968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.029093] FS-Cache: Loaded
[    0.029266] CacheFiles: Loaded
[    0.034970] NET: Registered protocol family 2
[    0.035434] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.035520] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.035698] TCP: Hash tables configured (established 8192 bind 8192)
[    0.035825] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.035859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.036041] NET: Registered protocol family 1
[    0.036387] RPC: Registered named UNIX socket transport module.
[    0.036395] RPC: Registered udp transport module.
[    0.036400] RPC: Registered tcp transport module.
[    0.036405] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.036586] Unpacking initramfs...
[    0.089262] Freeing initrd memory: 1076K
[    0.093682] audit: initializing netlink subsys (disabled)
[    0.093804] audit: type=2000 audit(0.092:1): state=initialized audit_enabled=0 res=1
[    0.094056] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.100440] FS-Cache: Netfs 'nfs' registered for caching
[    0.100911] NFS: Registering the id_resolver key type
[    0.100936] Key type id_resolver registered
[    0.100942] Key type id_legacy registered
[    0.100956] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.100962] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.106446] NET: Registered protocol family 38
[    0.106724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.106816] io scheduler noop registered
[    0.106823] io scheduler deadline registered
[    0.107021] io scheduler cfq registered (default)
[    0.107028] io scheduler mq-deadline registered
[    0.107034] io scheduler kyber registered
[    0.107558] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.109383] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.112325] sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.117865] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.118927] console [ttyS0] disabled
[    0.139076] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a U6_16550A
[    0.883132] console [ttyS0] enabled
[    0.909335] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 32, base_baud = 1500000) is a U6_16550A
[    0.938803] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 33, base_baud = 1500000) is a U6_16550A
[    0.948768] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.959312] loop: module loaded
[    0.964104] libphy: Fixed MDIO Bus: probed
[    0.969197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.975726] ehci-platform: EHCI generic platform driver
[    0.981099] ehci-platform 1c1a000.usb: EHCI Host Controller
[    0.986689] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    0.994872] ehci-platform 1c1a000.usb: irq 13, io mem 0x01c1a000
[    1.016688] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    1.023488] hub 1-0:1.0: USB hub found
[    1.027281] hub 1-0:1.0: 1 port detected
[    1.031833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.038032] ohci-platform: OHCI generic platform driver
[    1.043427] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.050056] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    1.058015] ohci-platform 1c1a400.usb: irq 14, io mem 0x01c1a400
[    1.125266] hub 2-0:1.0: USB hub found
[    1.129057] hub 2-0:1.0: 1 port detected
[    1.133613] usbcore: registered new interface driver uas
[    1.139002] usbcore: registered new interface driver usb-storage
[    1.145525] mousedev: PS/2 mouse device common for all mice
[    1.151374] ads7846 spi0.1: spi0.1 supply vcc not found, using dummy regulator
[    1.158910] ads7846 spi0.1: touchscreen, irq 146
[    1.163969] input: ADS7846 Touchscreen as /devices/platform/soc/1c68000.spi/spi_master/spi0/spi0.1/input/input0
[    1.174636] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
[    1.181429] sun6i-rtc 1f00000.rtc: RTC enabled
[    1.185932] i2c /dev entries driver
[    1.191047] thermal thermal_zone0: failed to read out thermal zone (-16)
[    1.198401] sdhci: Secure Digital Host Controller Interface driver
[    1.204586] sdhci: Copyright(c) Pierre Ossman
[    1.208970] Synopsys Designware Multimedia Card Interface Driver
[    1.216074] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    1.256816] sunxi-mmc 1c0f000.mmc: base:0xffff000008ce5000 irq:9
[    1.263652] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.310821] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.318916] mmc0: new SDHC card at address 0001
[    1.323911] mmcblk0: mmc0:0001 00000 14.6 GiB
[    1.330234]  mmcblk0: p1 p2
[    1.516706] sunxi-mmc 1c10000.mmc: base:0xffff000008cf5000 irq:10
[    1.550263] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.558710] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.560705] sunxi-mmc 1c11000.mmc: base:0xffff000008d05000 irq:11
[    1.560959] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.575961] ledtrig-cpu: registered to indicate activity on CPUs
[    1.582198] hidraw: raw HID events driver (C) Jiri Kosina
[    1.587816] usbcore: registered new interface driver usbhid
[    1.593402] usbhid: USB HID core driver
[    1.597330] fbtft_of_value: buswidth = 8
[    1.601267] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.606767] fbtft_of_value: debug = 0
[    1.610443] fbtft_of_value: rotate = 90
[    1.614294] fbtft_of_value: fps = 33
[    1.620835] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.661781] mmc2: new high speed MMC card at address 0001
[    1.667681] mmcblk2: mmc2:0001 8WPD3R 7.28 GiB
[    1.672465] mmcblk2boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB
[    1.678624] mmcblk2boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB
[    1.685691]  mmcblk2: p1 p2
[    1.767753] Console: switching to colour frame buffer device 40x30
[    1.774677] graphics fb0: fb_st7789v frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=35, spi0.0 at 50 MHz
[    1.787362] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
[    1.795289] sun4i-codec 1c22c00.codec: Failed to register our card
[    1.795656] mmc1: new high speed SDIO card at address 0001
[    1.808621] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.814337] NET: Registered protocol family 10
[    1.825654] Segment Routing with IPv6
[    1.830696] NET: Registered protocol family 17
[    1.842596] rfkill_gpio rfkill_bt: sunxi-bt device registered.
[    1.848508] 9pnet: Installing 9P2000 support
[    1.852830] Key type dns_resolver registered
[    1.857661] registered taskstats version 1
[    1.862253] Key type encrypted registered
[    1.872512] sun8i-emac 1c30000.ethernet: PHY regulator found
[    1.879032] ehci-platform 1c1b000.usb: EHCI Host Controller
[    1.884637] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    1.892609] ehci-platform 1c1b000.usb: irq 15, io mem 0x01c1b000
[    1.912691] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    1.919375] hub 3-0:1.0: USB hub found
[    1.923161] hub 3-0:1.0: 1 port detected
[    1.927660] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.933249] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    1.941164] ehci-platform 1c1c000.usb: irq 17, io mem 0x01c1c000
[    1.960695] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.967273] hub 4-0:1.0: USB hub found
[    1.971052] hub 4-0:1.0: 1 port detected
[    1.975483] ehci-platform 1c1d000.usb: EHCI Host Controller
[    1.981072] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    1.988979] ehci-platform 1c1d000.usb: irq 19, io mem 0x01c1d000
[    2.008699] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    2.015286] hub 5-0:1.0: USB hub found
[    2.019065] hub 5-0:1.0: 1 port detected
[    2.023504] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    2.030133] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    2.038008] ohci-platform 1c1b400.usb: irq 16, io mem 0x01c1b400
[    2.105188] hub 6-0:1.0: USB hub found
[    2.108968] hub 6-0:1.0: 1 port detected
[    2.113397] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    2.120025] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    2.127900] ohci-platform 1c1c400.usb: irq 18, io mem 0x01c1c400
[    2.197201] hub 7-0:1.0: USB hub found
[    2.200984] hub 7-0:1.0: 1 port detected
[    2.206294] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    2.212923] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    2.220823] ohci-platform 1c1d400.usb: irq 20, io mem 0x01c1d400
[    2.289188] hub 8-0:1.0: USB hub found
[    2.292968] hub 8-0:1.0: 1 port detected
[    2.297473] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    2.308437] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.314193] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9
[    2.322535] hub 9-0:1.0: USB hub found
[    2.326325] hub 9-0:1.0: 1 port detected
[    2.335943] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    2.346873] input: r-gpio-keys as /devices/platform/r-gpio-keys/input/input1
[    2.355117] gmac-3v3: disabling
[    2.358349] ALSA device list:
[    2.361365]   #0: H3 Audio Codec
[    2.366020] Freeing unused kernel memory: 448K
[    2.560939] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
[    2.570311] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
[    2.613169] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[    3.350374] systemd[1]: System time before build time, advancing clock.
[    3.506221] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.525469] systemd[1]: Detected architecture arm64.
[    3.550796] systemd[1]: Set hostname to <nanopi-neo-plus2>.
[    4.182807] systemd[1]: Listening on udev Control Socket.
[    4.201637] systemd[1]: Listening on Journal Socket.
[    4.217031] systemd[1]: Reached target Remote File Systems (Pre).
[    4.237231] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.256963] systemd[1]: Reached target Encrypted Volumes.
[    4.274483] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.301497] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.635393] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.042144] systemd-journald[228]: Received request to flush runtime journal from PID 1
[    5.784917] lirc_dev: IR Remote Control driver registered, major 245
[    5.789549] IR LIRC bridge handler initialized
[    5.790180] Registered IR keymap rc-empty
[    5.790303] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
[    5.790423] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input2
[    5.790765] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
[    5.790926] sunxi-ir 1f02000.ir: initialized sunXi IR driver
[    6.189067] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[    6.342875] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct  8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3
[    6.343549] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.1.6 Inc Compiler: 1.29.4 Inc ClmImport: 1.29.13 Creation: 2016-09-21 14:40:59
[    6.379503] random: crng init done
[    6.685316] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    7.186122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[    7.186134] brcmfmac: power management disabled
[    7.293479] libphy: 1c30000.ethernet: probed
[    7.305341] RTL8211E Gigabit Ethernet 1c30000.ethernet-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=1c30000.ethernet-0:00, irq=POLL)
[    7.305379] sun8i-emac 1c30000.ethernet: device MAC address slot 0 02:01:36:dd:1d:e9
[    7.315558] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[    7.315741] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[    7.315762] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
[    7.315794] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    7.612812] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
[    7.619728] rtc-ds1307: probe of 0-0068 failed with error -110
[   11.425750] sun8i-emac 1c30000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   11.425818] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.426191] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
[   11.426213] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
[   11.426233] sun8i-emac 1c30000.ethernet: device MAC address slot 3 33:33:ff:dd:1d:e9
	[ 0.000000] Booting Linux on physical CPU 0x0
	[ 0.000000] Linux version 4.14.3-h5 (alex@svn) (gcc version 7.1.1 20170707 (Linaro GCC 7.1-2017.08)) #1 SMP Tue Dec 5 09:32:37 -02 2017
	[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
	[ 0.000000] Machine model: FriendlyArm NanoPi NEO Plus2
	[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
	[ 0.000000] On node 0 totalpages: 262144
	[ 0.000000] DMA zone: 4096 pages used for memmap
	[ 0.000000] DMA zone: 0 pages reserved
	[ 0.000000] DMA zone: 262144 pages, LIFO batch:31
	[ 0.000000] psci: probing for conduit method from DT.
	[ 0.000000] psci: PSCIv0.2 detected in firmware.
	[ 0.000000] psci: Using standard PSCI v0.2 function IDs
	[ 0.000000] psci: Trusted OS migration not required
	[ 0.000000] random: fast init done
	[ 0.000000] percpu: Embedded 21 pages/cpu @ffff80003ef7c000 s46232 r8192 d31592 u86016
	[ 0.000000] pcpu-alloc: s46232 r8192 d31592 u86016 alloc=21*4096
	[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
	[ 0.000000] Detected VIPT I-cache on CPU0
	[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
	[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
	[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait fsck.repair=yes panic=10
	[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
	[ 0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
	[ 0.000000] log_buf_len min size: 16384 bytes
	[ 0.000000] log_buf_len: 32768 bytes
	[ 0.000000] early log buf free: 14796(90%)
	[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
	[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
	[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
	[ 0.000000] Memory: 1000164K/1048576K available (8126K kernel code, 644K rwdata, 2740K rodata, 448K init, 408K bss, 32028K reserved, 16384K cma-reserved)
	[ 0.000000] Virtual kernel memory layout:
	[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
	[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
	[ 0.000000] .text : 0xffff000008080000 - 0xffff000008870000 ( 8128 KB)
	[ 0.000000] .rodata : 0xffff000008870000 - 0xffff000008b20000 ( 2752 KB)
	[ 0.000000] .init : 0xffff000008b20000 - 0xffff000008b90000 ( 448 KB)
	[ 0.000000] .data : 0xffff000008b90000 - 0xffff000008c31008 ( 645 KB)
	[ 0.000000] .bss : 0xffff000008c31008 - 0xffff000008c97268 ( 409 KB)
	[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
	[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
	[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
	[ 0.000000] 0xffff7e0000000000 - 0xffff7e0001000000 ( 16 MB actual)
	[ 0.000000] memory : 0xffff800000000000 - 0xffff800040000000 ( 1024 MB)
	[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
	[ 0.000000] Hierarchical RCU implementation.
	[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
	[ 0.000000] GIC: Using split EOI/Deactivate mode
	[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
	[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
	[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
	[ 0.000149] Console: colour dummy device 80x25
	[ 0.000176] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
	[ 0.000188] pid_max: default: 32768 minimum: 301
	[ 0.000288] Security Framework initialized
	[ 0.000301] AppArmor: AppArmor disabled by boot time parameter
	[ 0.000350] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
	[ 0.000366] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
	[ 0.001546] ASID allocator initialised with 65536 entries
	[ 0.001614] Hierarchical SRCU implementation.
	[ 0.002008] smp: Bringing up secondary CPUs ...
	[ 0.002944] Detected VIPT I-cache on CPU1
	[ 0.003000] CPU1: Booted secondary processor [410fd034]
	[ 0.003659] Detected VIPT I-cache on CPU2
	[ 0.003688] CPU2: Booted secondary processor [410fd034]
	[ 0.004369] Detected VIPT I-cache on CPU3
	[ 0.004395] CPU3: Booted secondary processor [410fd034]
	[ 0.004459] smp: Brought up 1 node, 4 CPUs
	[ 0.004480] SMP: Total of 4 processors activated.
	[ 0.004488] CPU features: detected feature: 32-bit EL0 Support
	[ 0.004599] CPU: All CPU(s) started at EL2
	[ 0.004620] alternatives: patching kernel code
	[ 0.005539] devtmpfs: initialized
	[ 0.010260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
	[ 0.010279] futex hash table entries: 1024 (order: 5, 131072 bytes)
	[ 0.011035] pinctrl core: initialized pinctrl subsystem
	[ 0.011717] NET: Registered protocol family 16
	[ 0.012535] cpuidle: using governor menu
	[ 0.013131] vdso: 2 pages (1 code @ ffff000008876000, 1 data @ ffff000008b94000)
	[ 0.013147] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
	[ 0.014053] DMA: preallocated 256 KiB pool for atomic allocations
	[ 0.014119] Serial: AMBA PL011 UART driver
	[ 0.025549] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
	[ 0.026658] reg-fixed-voltage gmac-3v3: could not find pctldev for node /soc/pinctrl@01c20800/gmac_power_pin@0, deferring probe
	[ 0.026777] gpio-regulator gpio-regulator: could not find pctldev for node /soc/pinctrl@01f02c00/regulator_pins@0, deferring probe
	[ 0.027118] SCSI subsystem initialized
	[ 0.027292] usbcore: registered new interface driver usbfs
	[ 0.027329] usbcore: registered new interface driver hub
	[ 0.027381] usbcore: registered new device driver usb
	[ 0.027595] pps_core: LinuxPPS API ver. 1 registered
	[ 0.027601] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
	[ 0.027617] PTP clock support registered
	[ 0.027863] Advanced Linux Sound Architecture Driver Initialized.
	[ 0.028687] clocksource: Switched to clocksource arch_sys_counter
	[ 0.028909] VFS: Disk quotas dquot_6.6.0
	[ 0.028968] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
	[ 0.029093] FS-Cache: Loaded
	[ 0.029266] CacheFiles: Loaded
	[ 0.034970] NET: Registered protocol family 2
	[ 0.035434] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
	[ 0.035520] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
	[ 0.035698] TCP: Hash tables configured (established 8192 bind 8192)
	[ 0.035825] UDP hash table entries: 512 (order: 2, 16384 bytes)
	[ 0.035859] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
	[ 0.036041] NET: Registered protocol family 1
	[ 0.036387] RPC: Registered named UNIX socket transport module.
	[ 0.036395] RPC: Registered udp transport module.
	[ 0.036400] RPC: Registered tcp transport module.
	[ 0.036405] RPC: Registered tcp NFSv4.1 backchannel transport module.
	[ 0.036586] Unpacking initramfs...
	[ 0.089262] Freeing initrd memory: 1076K
	[ 0.093682] audit: initializing netlink subsys (disabled)
	[ 0.093804] audit: type=2000 audit(0.092:1): state=initialized audit_enabled=0 res=1
	[ 0.094056] workingset: timestamp_bits=46 max_order=18 bucket_order=0
	[ 0.100440] FS-Cache: Netfs 'nfs' registered for caching
	[ 0.100911] NFS: Registering the id_resolver key type
	[ 0.100936] Key type id_resolver registered
	[ 0.100942] Key type id_legacy registered
	[ 0.100956] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
	[ 0.100962] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
	[ 0.106446] NET: Registered protocol family 38
	[ 0.106724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
	[ 0.106816] io scheduler noop registered
	[ 0.106823] io scheduler deadline registered
	[ 0.107021] io scheduler cfq registered (default)
	[ 0.107028] io scheduler mq-deadline registered
	[ 0.107034] io scheduler kyber registered
	[ 0.107558] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
	[ 0.109383] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
	[ 0.112325] sun50i-h5-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
	[ 0.117865] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
	[ 0.118927] console [ttyS0] disabled
	[ 0.139076] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 31, base_baud = 1500000) is a U6_16550A
	[ 0.883132] console [ttyS0] enabled
	[ 0.909335] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 32, base_baud = 1500000) is a U6_16550A
	[ 0.938803] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 33, base_baud = 1500000) is a U6_16550A
	[ 0.948768] cacheinfo: Unable to detect cache hierarchy for CPU 0
	[ 0.959312] loop: module loaded
	[ 0.964104] libphy: Fixed MDIO Bus: probed
	[ 0.969197] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
	[ 0.975726] ehci-platform: EHCI generic platform driver
	[ 0.981099] ehci-platform 1c1a000.usb: EHCI Host Controller
	[ 0.986689] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
	[ 0.994872] ehci-platform 1c1a000.usb: irq 13, io mem 0x01c1a000
	[ 1.016688] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
	[ 1.023488] hub 1-0:1.0: USB hub found
	[ 1.027281] hub 1-0:1.0: 1 port detected
	[ 1.031833] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
	[ 1.038032] ohci-platform: OHCI generic platform driver
	[ 1.043427] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
	[ 1.050056] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
	[ 1.058015] ohci-platform 1c1a400.usb: irq 14, io mem 0x01c1a400
	[ 1.125266] hub 2-0:1.0: USB hub found
	[ 1.129057] hub 2-0:1.0: 1 port detected
	[ 1.133613] usbcore: registered new interface driver uas
	[ 1.139002] usbcore: registered new interface driver usb-storage
	[ 1.145525] mousedev: PS/2 mouse device common for all mice
	[ 1.151374] ads7846 spi0.1: spi0.1 supply vcc not found, using dummy regulator
	[ 1.158910] ads7846 spi0.1: touchscreen, irq 146
	[ 1.163969] input: ADS7846 Touchscreen as /devices/platform/soc/1c68000.spi/spi_master/spi0/spi0.1/input/input0
	[ 1.174636] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
	[ 1.181429] sun6i-rtc 1f00000.rtc: RTC enabled
	[ 1.185932] i2c /dev entries driver
	[ 1.191047] thermal thermal_zone0: failed to read out thermal zone (-16)
	[ 1.198401] sdhci: Secure Digital Host Controller Interface driver
	[ 1.204586] sdhci: Copyright(c) Pierre Ossman
	[ 1.208970] Synopsys Designware Multimedia Card Interface Driver
	[ 1.216074] sunxi-mmc 1c0f000.mmc: Got CD GPIO
	[ 1.256816] sunxi-mmc 1c0f000.mmc: base:0xffff000008ce5000 irq:9
	[ 1.263652] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
	[ 1.310821] mmc0: host does not support reading read-only switch, assuming write-enable
	[ 1.318916] mmc0: new SDHC card at address 0001
	[ 1.323911] mmcblk0: mmc0:0001 00000 14.6 GiB
	[ 1.330234] mmcblk0: p1 p2
	[ 1.516706] sunxi-mmc 1c10000.mmc: base:0xffff000008cf5000 irq:10
	[ 1.550263] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
	[ 1.558710] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
	[ 1.560705] sunxi-mmc 1c11000.mmc: base:0xffff000008d05000 irq:11
	[ 1.560959] sdhci-pltfm: SDHCI platform and OF driver helper
	[ 1.575961] ledtrig-cpu: registered to indicate activity on CPUs
	[ 1.582198] hidraw: raw HID events driver (C) Jiri Kosina
	[ 1.587816] usbcore: registered new interface driver usbhid
	[ 1.593402] usbhid: USB HID core driver
	[ 1.597330] fbtft_of_value: buswidth = 8
	[ 1.601267] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
	[ 1.606767] fbtft_of_value: debug = 0
	[ 1.610443] fbtft_of_value: rotate = 90
	[ 1.614294] fbtft_of_value: fps = 33
	[ 1.620835] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
	[ 1.661781] mmc2: new high speed MMC card at address 0001
	[ 1.667681] mmcblk2: mmc2:0001 8WPD3R 7.28 GiB
	[ 1.672465] mmcblk2boot0: mmc2:0001 8WPD3R partition 1 4.00 MiB
	[ 1.678624] mmcblk2boot1: mmc2:0001 8WPD3R partition 2 4.00 MiB
	[ 1.685691] mmcblk2: p1 p2
	[ 1.767753] Console: switching to colour frame buffer device 40x30
	[ 1.774677] graphics fb0: fb_st7789v frame buffer, 320x240, 150 KiB video memory, 4 KiB buffer memory, fps=35, spi0.0 at 50 MHz
	[ 1.787362] sun4i-codec 1c22c00.codec: ASoC: /soc/codec-analog@01f015c0 not registered
	[ 1.795289] sun4i-codec 1c22c00.codec: Failed to register our card
	[ 1.795656] mmc1: new high speed SDIO card at address 0001
	[ 1.808621] ip_tables: (C) 2000-2006 Netfilter Core Team
	[ 1.814337] NET: Registered protocol family 10
	[ 1.825654] Segment Routing with IPv6
	[ 1.830696] NET: Registered protocol family 17
	[ 1.842596] rfkill_gpio rfkill_bt: sunxi-bt device registered.
	[ 1.848508] 9pnet: Installing 9P2000 support
	[ 1.852830] Key type dns_resolver registered
	[ 1.857661] registered taskstats version 1
	[ 1.862253] Key type encrypted registered
	[ 1.872512] sun8i-emac 1c30000.ethernet: PHY regulator found
	[ 1.879032] ehci-platform 1c1b000.usb: EHCI Host Controller
	[ 1.884637] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
	[ 1.892609] ehci-platform 1c1b000.usb: irq 15, io mem 0x01c1b000
	[ 1.912691] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
	[ 1.919375] hub 3-0:1.0: USB hub found
	[ 1.923161] hub 3-0:1.0: 1 port detected
	[ 1.927660] ehci-platform 1c1c000.usb: EHCI Host Controller
	[ 1.933249] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
	[ 1.941164] ehci-platform 1c1c000.usb: irq 17, io mem 0x01c1c000
	[ 1.960695] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
	[ 1.967273] hub 4-0:1.0: USB hub found
	[ 1.971052] hub 4-0:1.0: 1 port detected
	[ 1.975483] ehci-platform 1c1d000.usb: EHCI Host Controller
	[ 1.981072] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
	[ 1.988979] ehci-platform 1c1d000.usb: irq 19, io mem 0x01c1d000
	[ 2.008699] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
	[ 2.015286] hub 5-0:1.0: USB hub found
	[ 2.019065] hub 5-0:1.0: 1 port detected
	[ 2.023504] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
	[ 2.030133] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
	[ 2.038008] ohci-platform 1c1b400.usb: irq 16, io mem 0x01c1b400
	[ 2.105188] hub 6-0:1.0: USB hub found
	[ 2.108968] hub 6-0:1.0: 1 port detected
	[ 2.113397] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
	[ 2.120025] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
	[ 2.127900] ohci-platform 1c1c400.usb: irq 18, io mem 0x01c1c400
	[ 2.197201] hub 7-0:1.0: USB hub found
	[ 2.200984] hub 7-0:1.0: 1 port detected
	[ 2.206294] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
	[ 2.212923] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
	[ 2.220823] ohci-platform 1c1d400.usb: irq 20, io mem 0x01c1d400
	[ 2.289188] hub 8-0:1.0: USB hub found
	[ 2.292968] hub 8-0:1.0: 1 port detected
	[ 2.297473] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
	[ 2.308437] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
	[ 2.314193] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9
	[ 2.322535] hub 9-0:1.0: USB hub found
	[ 2.326325] hub 9-0:1.0: 1 port detected
	[ 2.335943] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
	[ 2.346873] input: r-gpio-keys as /devices/platform/r-gpio-keys/input/input1
	[ 2.355117] gmac-3v3: disabling
	[ 2.358349] ALSA device list:
	[ 2.361365] #0: H3 Audio Codec
	[ 2.366020] Freeing unused kernel memory: 448K
	[ 2.560939] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
	[ 2.570311] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
	[ 2.613169] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
	[ 3.350374] systemd[1]: System time before build time, advancing clock.
	[ 3.506221] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
	[ 3.525469] systemd[1]: Detected architecture arm64.
	[ 3.550796] systemd[1]: Set hostname to <nanopi-neo-plus2>.
	[ 4.182807] systemd[1]: Listening on udev Control Socket.
	[ 4.201637] systemd[1]: Listening on Journal Socket.
	[ 4.217031] systemd[1]: Reached target Remote File Systems (Pre).
	[ 4.237231] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
	[ 4.256963] systemd[1]: Reached target Encrypted Volumes.
	[ 4.274483] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
	[ 4.301497] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
	[ 4.635393] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
	[ 5.042144] systemd-journald[228]: Received request to flush runtime journal from PID 1
	[ 5.784917] lirc_dev: IR Remote Control driver registered, major 245
	[ 5.789549] IR LIRC bridge handler initialized
	[ 5.790180] Registered IR keymap rc-empty
	[ 5.790303] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
	[ 5.790423] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input2
	[ 5.790765] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at minor = 0
	[ 5.790926] sunxi-ir 1f02000.ir: initialized sunXi IR driver
	[ 6.189067] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
	[ 6.342875] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 8 2016 15:31:47 version 7.46.57.4.ap.r4 (A1 Station/P2P) FWID 01-3621395e es6.c5.n4.a3
	[ 6.343549] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.1.6 Inc Compiler: 1.29.4 Inc ClmImport: 1.29.13 Creation: 2016-09-21 14:40:59
	[ 6.379503] random: crng init done
	[ 6.685316] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
	[ 7.186122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
	[ 7.186134] brcmfmac: power management disabled
	[ 7.293479] libphy: 1c30000.ethernet: probed
	[ 7.305341] RTL8211E Gigabit Ethernet 1c30000.ethernet-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=1c30000.ethernet-0:00, irq=POLL)
	[ 7.305379] sun8i-emac 1c30000.ethernet: device MAC address slot 0 02:01:36:dd:1d:e9
	[ 7.315558] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
	[ 7.315741] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
	[ 7.315762] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
	[ 7.315794] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
	[ 7.612812] i2c i2c-0: mv64xxx: I2C bus locked, block: 1, time_left: 0
	[ 7.619728] rtc-ds1307: probe of 0-0068 failed with error -110
	[ 11.425750] sun8i-emac 1c30000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
	[ 11.425818] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
	[ 11.426191] sun8i-emac 1c30000.ethernet: device MAC address slot 1 33:33:00:00:00:01
	[ 11.426213] sun8i-emac 1c30000.ethernet: device MAC address slot 2 01:00:5e:00:00:01
	[ 11.426233] sun8i-emac 1c30000.ethernet: device MAC address slot 3 33:33:ff:dd:1d:e9