Skip to content

Instantly share code, notes, and snippets.

@avafinger

avafinger/Kernel 5.7.1 - NanoPi M4

Created June 7, 2020 23:15
Show Gist options
  • Save avafinger/54a1d590308215a37e437d1a93033c15 to your computer and use it in GitHub Desktop.
Save avafinger/54a1d590308215a37e437d1a93033c15 to your computer and use it in GitHub Desktop.
Download ZIP
Stable kernel 5.7.1 - NanoPi M4
Raw
Kernel 5.7.1 - NanoPi M4
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.7.1 (alex@svn) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12-rc1), GNU ld (Linaro_Binutils-2019.12-rc1) 2.28.2.20170706) #1 SMP PREEMPT Sun Jun 7 19:11:16 -03 2020
[ 0.000000] Machine model: FriendlyElec NanoPi M4
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x000000007c000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7bbab100-0x7bbacfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 523776
[ 0.000000] DMA zone: 4088 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 261632 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 22 pages/cpu s52568 r8192 d29352 u90112
[ 0.000000] pcpu-alloc: s52568 r8192 d29352 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 1901924K/2095104K available (11452K kernel code, 762K rwdata, 4420K rodata, 2496K init, 502K bss, 127644K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x000000007b040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b050000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4f0 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002132] Console: colour dummy device 80x25
[ 0.003702] printk: console [tty0] enabled
[ 0.003877] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.003940] pid_max: default: 32768 minimum: 301
[ 0.004164] LSM: Security Framework initializing
[ 0.004324] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.004387] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.007692] rcu: Hierarchical SRCU implementation.
[ 0.008215] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.008809] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.011922] EFI services will not be available.
[ 0.012572] smp: Bringing up secondary CPUs ...
[ 0.013551] Detected VIPT I-cache on CPU1
[ 0.013605] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.013626] GICv3: CPU1: using allocated LPI pending table @0x000000007b060000
[ 0.013687] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.014699] Detected VIPT I-cache on CPU2
[ 0.014745] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.014763] GICv3: CPU2: using allocated LPI pending table @0x000000007b070000
[ 0.014807] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.015937] Detected VIPT I-cache on CPU3
[ 0.015980] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.015999] GICv3: CPU3: using allocated LPI pending table @0x000000007b100000
[ 0.016042] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.019631] CPU features: detected: EL2 vector hardening
[ 0.020059] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.020387] CPU features: detected: ARM erratum 1319367
[ 0.020667] Detected PIPT I-cache on CPU4
[ 0.021923] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.022396] GICv3: CPU4: using allocated LPI pending table @0x000000007b110000
[ 0.023670] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.033048] Detected PIPT I-cache on CPU5
[ 0.034255] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.034703] GICv3: CPU5: using allocated LPI pending table @0x000000007b120000
[ 0.035822] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.041507] smp: Brought up 1 node, 6 CPUs
[ 0.042209] SMP: Total of 6 processors activated.
[ 0.042261] CPU features: detected: 32-bit EL0 Support
[ 0.042311] CPU features: detected: CRC32 instructions
[ 0.221755] CPU: All CPU(s) started at EL2
[ 0.222597] alternatives: patching kernel code
[ 0.228135] devtmpfs: initialized
[ 0.254512] KASLR disabled due to lack of seed
[ 0.255527] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.255625] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.261207] pinctrl core: initialized pinctrl subsystem
[ 0.263610] thermal_sys: Registered thermal governor 'step_wise'
[ 0.264594] DMI not present or invalid.
[ 0.266258] NET: Registered protocol family 16
[ 0.309698] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.309820] audit: initializing netlink subsys (disabled)
[ 0.313289] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
[ 0.317353] cpuidle: using governor menu
[ 0.318151] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.320832] ASID allocator initialised with 65536 entries
[ 0.377912] Serial: AMBA PL011 UART driver
[ 2.440109] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 2.441273] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 2.442840] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 2.443672] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 2.572557] cryptd: max_cpu_qlen set to 1000
[ 2.592271] ACPI: Interpreter disabled.
[ 2.599668] vcc5v0_core: supplied by vdd_5v
[ 2.600206] vcc5v0_sys: supplied by vdd_5v
[ 2.600379] vbus_typec: supplied by vdd_5v
[ 2.600783] vcc5v0_usb1: supplied by vcc5v0_sys
[ 2.601148] vcc3v3_sys: supplied by vcc5v0_core
[ 2.601272] vcc3v0_sd: supplied by vcc3v3_sys
[ 2.601658] vcc5v0_usb2: supplied by vcc5v0_sys
[ 2.605958] iommu: Default domain type: Translated
[ 2.612011] vgaarb: loaded
[ 2.613524] SCSI subsystem initialized
[ 2.615546] libata version 3.00 loaded.
[ 2.616324] usbcore: registered new interface driver usbfs
[ 2.616452] usbcore: registered new interface driver hub
[ 2.616732] usbcore: registered new device driver usb
[ 2.617903] pps_core: LinuxPPS API ver. 1 registered
[ 2.617941] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.618017] PTP clock support registered
[ 2.618563] EDAC MC: Ver: 3.0.0
[ 2.620961] FPGA manager framework
[ 2.621251] Advanced Linux Sound Architecture Driver Initialized.
[ 2.625036] clocksource: Switched to clocksource arch_sys_counter
[ 2.626498] VFS: Disk quotas dquot_6.6.0
[ 2.626852] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.627396] pnp: PnP ACPI: disabled
[ 2.643044] NET: Registered protocol family 2
[ 2.644363] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 2.644513] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 2.645096] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 2.645693] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.646005] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.646179] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 2.647442] NET: Registered protocol family 1
[ 2.650359] RPC: Registered named UNIX socket transport module.
[ 2.650398] RPC: Registered udp transport module.
[ 2.650428] RPC: Registered tcp transport module.
[ 2.650458] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.650519] PCI: CLS 0 bytes, default 64
[ 2.651066] Unpacking initramfs...
[ 2.771682] Freeing initrd memory: 1128K
[ 2.780895] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 2.783654] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 2.785747] kvm [1]: IPA Size Limit: 40bits
[ 2.787541] kvm [1]: vgic-v2@fff20000
[ 2.787764] kvm [1]: GIC system register CPU interface enabled
[ 2.790935] kvm [1]: vgic interrupt IRQ10
[ 2.794052] kvm [1]: Hyp mode initialized successfully
[ 2.817907] Initialise system trusted keyrings
[ 2.819221] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 2.838261] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.842347] NFS: Registering the id_resolver key type
[ 2.842552] Key type id_resolver registered
[ 2.842583] Key type id_legacy registered
[ 2.842627] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.885599] Key type asymmetric registered
[ 2.885725] Asymmetric key parser 'x509' registered
[ 2.885889] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 2.885935] io scheduler mq-deadline registered
[ 2.885965] io scheduler kyber registered
[ 2.919483] EINJ: ACPI disabled.
[ 2.924594] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.924897] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 2.927977] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 2.928062] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 2.939850] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.945255] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[ 2.945896] serial serial0: tty port ttyS0 registered
[ 2.947411] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[ 3.044045] printk: console [ttyS2] enabled
[ 3.050233] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 3.069196] loop: module loaded
[ 3.079915] libphy: Fixed MDIO Bus: probed
[ 3.081183] tun: Universal TUN/TAP device driver, 1.6
[ 3.084197] thunder_xcv, ver 1.0
[ 3.084616] thunder_bgx, ver 1.0
[ 3.085073] nicpf, ver 1.0
[ 3.087089] hclge is initializing
[ 3.087874] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 3.088547] hns3: Copyright (c) 2017 Huawei Corporation.
[ 3.089235] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 3.089778] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 3.090413] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 3.091056] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.091686] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 3.092408] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 3.093451] sky2: driver version 1.30
[ 3.095005] VFIO - User Level meta-driver version: 0.3
[ 3.106130] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 3.122201] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.123022] ehci-pci: EHCI PCI platform driver
[ 3.123514] ehci-platform: EHCI generic platform driver
[ 3.126959] ehci-platform fe380000.usb: EHCI Host Controller
[ 3.127576] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 3.128943] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[ 3.144848] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 3.145848] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 3.146623] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.147297] usb usb1: Product: EHCI Host Controller
[ 3.147761] usb usb1: Manufacturer: Linux 5.7.1 ehci_hcd
[ 3.148261] usb usb1: SerialNumber: fe380000.usb
[ 3.150150] hub 1-0:1.0: USB hub found
[ 3.150567] hub 1-0:1.0: 1 port detected
[ 3.154186] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 3.154752] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 3.155817] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[ 3.168739] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 3.169607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 3.170380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.171059] usb usb2: Product: EHCI Host Controller
[ 3.171520] usb usb2: Manufacturer: Linux 5.7.1 ehci_hcd
[ 3.172019] usb usb2: SerialNumber: fe3c0000.usb
[ 3.173688] hub 2-0:1.0: USB hub found
[ 3.174099] hub 2-0:1.0: 1 port detected
[ 3.175854] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.176479] ohci-pci: OHCI PCI platform driver
[ 3.177211] ohci-platform: OHCI generic platform driver
[ 3.178248] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 3.178903] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 3.179966] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[ 3.241304] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07
[ 3.242078] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.242752] usb usb3: Product: Generic Platform OHCI controller
[ 3.243306] usb usb3: Manufacturer: Linux 5.7.1 ohci_hcd
[ 3.243805] usb usb3: SerialNumber: fe3a0000.usb
[ 3.245255] hub 3-0:1.0: USB hub found
[ 3.245674] hub 3-0:1.0: 1 port detected
[ 3.247065] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 3.247720] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 3.248778] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[ 3.312991] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.07
[ 3.313766] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.314443] usb usb4: Product: Generic Platform OHCI controller
[ 3.314997] usb usb4: Manufacturer: Linux 5.7.1 ohci_hcd
[ 3.315496] usb usb4: SerialNumber: fe3e0000.usb
[ 3.316930] hub 4-0:1.0: USB hub found
[ 3.317342] hub 4-0:1.0: 1 port detected
[ 3.321039] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.321630] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 3.322722] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 3.323684] xhci-hcd xhci-hcd.0.auto: irq 231, io mem 0xfe800000
[ 3.325210] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 3.325986] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.326660] usb usb5: Product: xHCI Host Controller
[ 3.327120] usb usb5: Manufacturer: Linux 5.7.1 xhci-hcd
[ 3.327618] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 3.329534] hub 5-0:1.0: USB hub found
[ 3.329975] hub 5-0:1.0: 1 port detected
[ 3.331138] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 3.331676] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 3.332405] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 3.333169] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.334143] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[ 3.334915] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.335588] usb usb6: Product: xHCI Host Controller
[ 3.336048] usb usb6: Manufacturer: Linux 5.7.1 xhci-hcd
[ 3.336546] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 3.338019] hub 6-0:1.0: USB hub found
[ 3.338448] hub 6-0:1.0: 1 port detected
[ 3.339860] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.340408] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 3.341509] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 3.342625] xhci-hcd xhci-hcd.1.auto: irq 232, io mem 0xfe900000
[ 3.343814] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
[ 3.344588] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.345305] usb usb7: Product: xHCI Host Controller
[ 3.345768] usb usb7: Manufacturer: Linux 5.7.1 xhci-hcd
[ 3.346268] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 3.347707] hub 7-0:1.0: USB hub found
[ 3.348123] hub 7-0:1.0: 1 port detected
[ 3.349229] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.349766] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 3.350494] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 3.351212] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.352215] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.07
[ 3.353089] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.353766] usb usb8: Product: xHCI Host Controller
[ 3.354227] usb usb8: Manufacturer: Linux 5.7.1 xhci-hcd
[ 3.354727] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 3.356062] hub 8-0:1.0: USB hub found
[ 3.356477] hub 8-0:1.0: 1 port detected
[ 3.358129] usbcore: registered new interface driver usb-storage
[ 3.367102] i2c /dev entries driver
[ 3.375878] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 3.377014] fan53555-reg: supplied by vcc3v3_sys
[ 3.380470] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 3.381441] fan53555-reg: supplied by vcc3v3_sys
[ 3.384727] rk808 0-001b: chip id: 0x0
[ 3.393541] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 3.394276] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 3.394964] DCDC_REG1: supplied by vcc3v3_sys
[ 3.396834] DCDC_REG2: supplied by vcc3v3_sys
[ 3.398101] DCDC_REG3: supplied by vcc3v3_sys
[ 3.398957] DCDC_REG4: supplied by vcc3v3_sys
[ 3.400235] LDO_REG1: supplied by vcc3v3_sys
[ 3.402247] LDO_REG2: supplied by vcc3v3_sys
[ 3.403820] LDO_REG3: supplied by vcc3v3_sys
[ 3.405624] LDO_REG4: supplied by vcc3v3_sys
[ 3.407368] LDO_REG5: supplied by vcc3v3_sys
[ 3.409107] LDO_REG6: supplied by vcc3v3_sys
[ 3.410962] LDO_REG7: supplied by vcc3v3_sys
[ 3.412571] LDO_REG8: supplied by vcc3v3_sys
[ 3.414358] SWITCH_REG1: supplied by vcc3v3_sys
[ 3.415300] SWITCH_REG2: supplied by vcc3v3_sys
[ 3.431276] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[ 3.432596] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[ 3.436186] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[ 3.438325] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[ 3.441843] sdhci: Secure Digital Host Controller Interface driver
[ 3.442395] sdhci: Copyright(c) Pierre Ossman
[ 3.442930] Synopsys Designware Multimedia Card Interface Driver
[ 3.444437] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 3.445097] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 3.445686] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 3.446220] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[ 3.447214] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 3.447727] mmc_host mmc0: card is non-removable.
[ 3.460853] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.474879] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 3.475532] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 3.476121] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 3.476683] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[ 3.477728] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 3.478494] random: fast init done
[ 3.491572] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.505542] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.507083] mmc2: CQHCI version 5.10
[ 3.509240] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.511489] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.513970] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.517562] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.531441] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 3.533661] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.534633] usbcore: registered new interface driver usbhid
[ 3.535122] usbhid: USB HID core driver
[ 3.536690] NET: Registered protocol family 17
[ 3.537117] Key type dns_resolver registered
[ 3.537941] registered taskstats version 1
[ 3.538310] Loading compiled-in X.509 certificates
[ 3.552299] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.553742] ALSA device list:
[ 3.554012] No soundcards found.
[ 3.554434] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 3.555807] Freeing unused kernel memory: 2496K
[ 3.568828] Run /init as init process
[ 3.569158] with arguments:
[ 3.569160] /init
[ 3.569161] earlyprintk
[ 3.569162] with environment:
[ 3.569163] HOME=/
[ 3.569165] TERM=linux
[ 3.580483] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 3.585250] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 3.688828] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 3.840834] usb 7-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 0.50
[ 3.841570] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.842201] usb 7-1: Product: USB2.0 Hub
[ 3.842649] usb 7-1: Manufacturer: VIA Labs, Inc.
[ 3.895614] hub 7-1:1.0: USB hub found
[ 3.896279] hub 7-1:1.0: 4 ports detected
[ 3.968893] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 213
[ 3.969518] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 3.970733] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[ 3.974109] mmcblk1: p1 p2
[ 3.980919] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 178
[ 3.985324] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 3.990497] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 4.083619] usb 8-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 0.50
[ 4.084355] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.085023] usb 8-1: Product: USB3.0 Hub
[ 4.085472] usb 8-1: Manufacturer: VIA Labs, Inc.
[ 4.103828] hub 8-1:1.0: USB hub found
[ 4.104511] hub 8-1:1.0: 4 ports detected
[ 4.696825] usb 7-1.4: new high-speed USB device number 3 using xhci-hcd
[ 4.846552] usb 7-1.4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[ 4.847305] usb 7-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.847951] usb 7-1.4: Product: USB2.0 Hub
[ 4.887777] hub 7-1.4:1.0: USB hub found
[ 4.888550] hub 7-1.4:1.0: 4 ports detected
[ 5.176825] usb 7-1.4.3: new low-speed USB device number 4 using xhci-hcd
[ 5.282959] usb 7-1.4.3: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[ 5.283727] usb 7-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.284389] usb 7-1.4.3: Product: USB Keyboard
[ 5.284821] usb 7-1.4.3: Manufacturer: SIGMACHIP
[ 5.370883] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.0/0003:1C4F:0002.0001/input/input1
[ 5.429465] hid-generic 0003:1C4F:0002.0001: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input0
[ 5.433939] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0002/input/input2
[ 5.493384] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0002/input/input3
[ 5.495312] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input1
[ 8.654469] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[ 9.050071] systemd[1]: System time before build time, advancing clock.
[ 9.386305] NET: Registered protocol family 10
[ 9.387864] Segment Routing with IPv6
[ 9.438298] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 9.440775] systemd[1]: Detected architecture arm64.
[ 9.469868] systemd[1]: Set hostname to <nanopi-m4>.
[ 9.471687] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 9.678884] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 9.680432] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 9.795703] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 9.834495] systemd[1]: /etc/systemd/system/rc-local.service:10: Support for option SysVStartPriority= has been removed and it is ignored
[ 9.893050] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.894248] systemd[1]: Listening on Journal Socket.
[ 9.904908] random: systemd: uninitialized urandom read (16 bytes read)
[ 9.907389] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 9.917121] random: systemd: uninitialized urandom read (16 bytes read)
[ 10.112103] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[ 10.561673] systemd-journald[262]: Received request to flush runtime journal from PID 1
[ 10.658411] vcc1v8_s3: supplied by vcc_1v8
[ 10.658478] vcca1v8_s3: supplied by vcc1v8_s3
[ 10.706988] rt5651 1-001a: Failed to reguest IRQ 0: -22
[ 10.732999] rk808-rtc rk808-rtc: registered as rtc0
[ 10.733490] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:19 UTC (1358499019)
[ 10.812621] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 10.812662] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 10.812826] vcca0v9_s3: supplied by vcc1v8_s3
[ 10.831483] mc: Linux media interface: v0.10
[ 11.169484] videodev: Linux video capture interface: v2.00
[ 11.340759] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 11.341623] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 11.607363] Bluetooth: Core ver 2.22
[ 11.607450] NET: Registered protocol family 31
[ 11.607452] Bluetooth: HCI device and connection manager initialized
[ 11.607466] Bluetooth: HCI socket layer initialized
[ 11.607473] Bluetooth: L2CAP socket layer initialized
[ 11.607486] Bluetooth: SCO socket layer initialized
[ 11.612866] asoc-simple-card rt5651-sound: rt5651-aif1 <-> ff890000.i2s mapping ok
[ 11.612904] asoc-simple-card rt5651-sound: ASoC: no DMI vendor name!
[ 11.620449] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 11.620454] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 11.620524] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 11.620588] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 11.620592] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 11.620594] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 11.620605] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 11.620646] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 11.621262] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 11.626269] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 11.626449] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 11.626452] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 11.626455] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 11.626458] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 11.626459] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 11.626462] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 11.626464] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 11.626478] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 11.626480] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 11.626483] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 11.626488] rk_gmac-dwmac fe300000.ethernet: device MAC address 16:00:51:31:01:7e
[ 11.626665] libphy: stmmac: probed
[ 11.789392] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.791484] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[ 11.791500] asoc-simple-card spdif-sound: ASoC: no DMI vendor name!
[ 11.803505] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 11.857114] panfrost ff9a0000.gpu: clock rate = 500000000
[ 11.857422] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 11.857428] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[ 11.857433] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 11.857437] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 11.858533] panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[ 11.858854] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[ 11.953953] Bluetooth: HCI UART driver ver 2.3
[ 11.953961] Bluetooth: HCI UART protocol H4 registered
[ 11.954006] Bluetooth: HCI UART protocol LL registered
[ 11.954265] Bluetooth: HCI UART protocol Broadcom registered
[ 12.072838] dw-apb-uart ff180000.serial: failed to request DMA
[ 12.136807] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 12.218342] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[ 12.218836] rockchip-vop ff900000.vop: Adding to iommu group 3
[ 12.222401] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[ 12.223973] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[ 12.224177] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 12.224559] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[ 12.224563] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.264301] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.266135] rkvdec ff660000.video-codec: Adding to iommu group 1
[ 12.291571] Console: switching to colour frame buffer device 240x67
[ 12.303199] random: crng init done
[ 12.303204] random: 7 urandom warning(s) missed due to ratelimiting
[ 12.305250] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 12.322816] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[ 12.329201] Bluetooth: hci0: BCM: chip id 101
[ 12.329413] Bluetooth: hci0: BCM: features 0x2f
[ 12.330402] Bluetooth: hci0: BCM4354A2
[ 12.330407] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[ 12.340915] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[ 12.357232] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.361921] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[ 12.362447] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video1
[ 12.362578] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video2
[ 12.414681] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 12.419295] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d
[ 12.470545] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 12.470555] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
[ 12.926814] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[ 12.926828] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 13.065505] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[ 13.293439] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=174)
[ 13.304713] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 13.304729] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 13.304739] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[ 14.387712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.387731] Bluetooth: BNEP socket layer initialized
[ 14.793763] Filesystem uses "xz" compression. This is not supported
[ 22.882341] Bluetooth: RFCOMM socket layer initialized
[ 22.882374] Bluetooth: RFCOMM ver 1.11
[ 24.931313] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.776936] vcca0v9_s3: disabling
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment