Mainline Kernel 5.3.0-rc3 BananaPi M2Z

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.3.0-rc3 (alex@svn) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP Wed Aug 7 20:36:42 -03 2019
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Banana Pi M2 Zero
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 256 MiB at 0x4dc00000
[    0.000000] On node 0 totalpages: 131072
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 131072 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: Using PSCI v0.1 Function IDs from DT
[    0.000000] percpu: Embedded 16 pages/cpu s35340 r8192 d22004 u65536
[    0.000000] pcpu-alloc: s35340 r8192 d22004 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootfstype=ext4 root=/dev/mmcblk0p2 rw rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0 drm_leak_fbdev_smem=1
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 241872K/524288K available (9216K kernel code, 327K rwdata, 1972K rodata, 1024K init, 265K bss, 20272K reserved, 262144K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x484 with crng_init=0
[    0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000017] Switching to timer-based delay loop, resolution 41ns
[    0.000218] Console: colour dummy device 80x30
[    0.000269] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.000281] pid_max: default: 32768 minimum: 301
[    0.000433] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.000446] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.001264] CPU: Testing write buffer coherency: ok
[    0.001722] /cpus/cpu@0 missing clock-frequency property
[    0.001741] /cpus/cpu@1 missing clock-frequency property
[    0.001755] /cpus/cpu@2 missing clock-frequency property
[    0.001770] /cpus/cpu@3 missing clock-frequency property
[    0.001782] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.002355] Setting up static identity map for 0x40100000 - 0x40100060
[    0.002488] rcu: Hierarchical SRCU implementation.
[    0.003077] smp: Bringing up secondary CPUs ...
[    0.013875] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.024792] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.035589] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.035677] smp: Brought up 1 node, 4 CPUs
[    0.035697] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.035704] CPU: All CPU(s) started in HYP mode.
[    0.035708] CPU: Virtualization extensions available.
[    0.036722] devtmpfs: initialized
[    0.043149] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.043405] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.043432] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.052594] pinctrl core: initialized pinctrl subsystem
[    0.053805] NET: Registered protocol family 16
[    0.055714] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.056681] cpuidle: using governor menu
[    0.057015] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.057023] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.079938] SCSI subsystem initialized
[    0.080198] libata version 3.00 loaded.
[    0.080411] usbcore: registered new interface driver usbfs
[    0.080479] usbcore: registered new interface driver hub
[    0.080564] usbcore: registered new device driver usb
[    0.080821] pps_core: LinuxPPS API ver. 1 registered
[    0.080830] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.080848] PTP clock support registered
[    0.081234] Advanced Linux Sound Architecture Driver Initialized.
[    0.082607] clocksource: Switched to clocksource arch_sys_counter
[    0.082766] VFS: Disk quotas dquot_6.6.0
[    0.082845] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.090749] thermal_sys: Registered thermal governor 'fair_share'
[    0.090755] thermal_sys: Registered thermal governor 'bang_bang'
[    0.090768] thermal_sys: Registered thermal governor 'step_wise'
[    0.090774] thermal_sys: Registered thermal governor 'user_space'
[    0.090779] thermal_sys: Registered thermal governor 'power_allocator'
[    0.091423] NET: Registered protocol family 2
[    0.092186] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.092214] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.092266] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.092329] TCP: Hash tables configured (established 4096 bind 4096)
[    0.092463] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.092509] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.092878] NET: Registered protocol family 1
[    0.093536] RPC: Registered named UNIX socket transport module.
[    0.093548] RPC: Registered udp transport module.
[    0.093554] RPC: Registered tcp transport module.
[    0.093559] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.094344] Unpacking initramfs...
[    0.138245] Freeing initrd memory: 960K
[    0.140081] Initialise system trusted keyrings
[    0.140447] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.147735] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.149260] NFS: Registering the id_resolver key type
[    0.149304] Key type id_resolver registered
[    0.149311] Key type id_legacy registered
[    0.149326] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.149334] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.150312] fuse: init (API version 7.31)
[    0.150745] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[    0.188692] Key type asymmetric registered
[    0.188707] Asymmetric key parser 'x509' registered
[    0.188769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    0.188780] io scheduler mq-deadline registered
[    0.188786] io scheduler kyber registered
[    0.189870] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
[    0.194204] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    0.195972] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
[    0.248336] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    0.250073] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
[    0.251067] printk: console [ttyS0] disabled
[    0.271298] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 43, base_baud = 1500000) is a U6_16550A
[    0.964038] printk: console [ttyS0] enabled
[    0.968657] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
[    0.999344] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 44, base_baud = 1500000) is a U6_16550A
[    1.011047] libphy: Fixed MDIO Bus: probed
[    1.015428] CAN device driver interface
[    1.019897] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
[    1.025709] dwmac-sun8i 1c30000.ethernet: No regulator found
[    1.031675] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
[    1.038913] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
[    1.046140] dwmac-sun8i 1c30000.ethernet: COE Type 2
[    1.051100] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
[    1.057890] dwmac-sun8i 1c30000.ethernet: Normal descriptors
[    1.063553] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
[    1.069368] libphy: stmmac: probed
[    1.073407] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
[    1.079595] libphy: mdio_mux: probed
[    1.083213] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
[    1.089563] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
[    1.096452] libphy: mdio_mux: probed
[    1.100499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.107045] ehci-platform: EHCI generic platform driver
[    1.112452] ehci-platform 1c1a000.usb: EHCI Host Controller
[    1.118055] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
[    1.126243] ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000
[    1.152612] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
[    1.158911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.167194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.174415] usb usb1: Product: EHCI Host Controller
[    1.179288] usb usb1: Manufacturer: Linux 5.3.0-rc3 ehci_hcd
[    1.184952] usb usb1: SerialNumber: 1c1a000.usb
[    1.190058] hub 1-0:1.0: USB hub found
[    1.193862] hub 1-0:1.0: 1 port detected
[    1.198710] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.204938] ohci-platform: OHCI generic platform driver
[    1.210325] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
[    1.216966] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
[    1.224917] ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400
[    1.296777] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    1.305061] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.312274] usb usb2: Product: Generic Platform OHCI controller
[    1.318201] usb usb2: Manufacturer: Linux 5.3.0-rc3 ohci_hcd
[    1.323858] usb usb2: SerialNumber: 1c1a400.usb
[    1.328878] hub 2-0:1.0: USB hub found
[    1.332675] hub 2-0:1.0: 1 port detected
[    1.337530] usbcore: registered new interface driver usb-storage
[    1.343670] usbcore: registered new interface driver ch341
[    1.349178] usbserial: USB Serial support registered for ch341-uart
[    1.355483] usbcore: registered new interface driver cp210x
[    1.361082] usbserial: USB Serial support registered for cp210x
[    1.367049] usbcore: registered new interface driver ftdi_sio
[    1.372821] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.380219] usbcore: registered new interface driver pl2303
[    1.385839] usbserial: USB Serial support registered for pl2303
[    1.392544] mousedev: PS/2 mouse device common for all mice
[    1.398917] sun6i-rtc 1f00000.rtc: registered as rtc0
[    1.403983] sun6i-rtc 1f00000.rtc: RTC enabled
[    1.408682] i2c /dev entries driver
[    1.413926] thermal thermal_zone0: failed to read out thermal zone (-16)
[    1.421174] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
[    1.429677] sun8i-h3-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
[    1.440260] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
[    1.476164] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
[    1.484150] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
[    1.513367] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
[    1.521714] ledtrig-cpu: registered to indicate activity on CPUs
[    1.528022] hidraw: raw HID events driver (C) Jiri Kosina
[    1.533850] usbcore: registered new interface driver usbhid
[    1.539433] usbhid: USB HID core driver
[    1.546329] Initializing XFRM netlink socket
[    1.548005] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.550617] NET: Registered protocol family 17
[    1.563091] can: controller area network core (rev 20170425 abi 9)
[    1.564614] mmc0: new high speed SDHC card at address aaaa
[    1.569352] NET: Registered protocol family 29
[    1.575484] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.579225] can: raw protocol (rev 20170425)
[    1.585597] mmcblk0: mmc0:aaaa SL16G 14.8 GiB 
[    1.588970] can: broadcast manager protocol (rev 20170425 t)
[    1.595181] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.599112] can: netlink gateway (rev 20170425) max_hops=1
[    1.604806]  mmcblk0: p1 p2
[    1.610702] 9pnet: Installing 9P2000 support
[    1.614232] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.617199] Key type dns_resolver registered
[    1.625369] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.627142] Registering SWP/SWPB emulation handler
[    1.635673] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    1.637786] Loading compiled-in X.509 certificates
[    1.658421] ehci-platform 1c1b000.usb: EHCI Host Controller
[    1.664077] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
[    1.672387] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000
[    1.688530] random: fast init done
[    1.702610] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
[    1.708898] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.717171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.724393] usb usb3: Product: EHCI Host Controller
[    1.729267] usb usb3: Manufacturer: Linux 5.3.0-rc3 ehci_hcd
[    1.730086] mmc1: new high speed SDIO card at address 0001
[    1.734933] usb usb3: SerialNumber: 1c1b000.usb
[    1.735538] hub 3-0:1.0: USB hub found
[    1.748742] hub 3-0:1.0: 1 port detected
[    1.753438] ehci-platform 1c1c000.usb: EHCI Host Controller
[    1.759029] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
[    1.767049] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
[    1.802620] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
[    1.808884] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.817160] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.824384] usb usb4: Product: EHCI Host Controller
[    1.829257] usb usb4: Manufacturer: Linux 5.3.0-rc3 ehci_hcd
[    1.834919] usb usb4: SerialNumber: 1c1c000.usb
[    1.839944] hub 4-0:1.0: USB hub found
[    1.843736] hub 4-0:1.0: 1 port detected
[    1.848309] ehci-platform 1c1d000.usb: EHCI Host Controller
[    1.853915] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
[    1.861878] ehci-platform 1c1d000.usb: irq 33, io mem 0x01c1d000
[    1.892619] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
[    1.898842] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.907115] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.914341] usb usb5: Product: EHCI Host Controller
[    1.919213] usb usb5: Manufacturer: Linux 5.3.0-rc3 ehci_hcd
[    1.924876] usb usb5: SerialNumber: 1c1d000.usb
[    1.929866] hub 5-0:1.0: USB hub found
[    1.933671] hub 5-0:1.0: 1 port detected
[    1.938232] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
[    1.944873] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
[    1.953248] ohci-platform 1c1b400.usb: irq 30, io mem 0x01c1b400
[    2.026810] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    2.035083] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.042296] usb usb6: Product: Generic Platform OHCI controller
[    2.048228] usb usb6: Manufacturer: Linux 5.3.0-rc3 ohci_hcd
[    2.053894] usb usb6: SerialNumber: 1c1b400.usb
[    2.058896] hub 6-0:1.0: USB hub found
[    2.062692] hub 6-0:1.0: 1 port detected
[    2.067272] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
[    2.073917] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
[    2.081859] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
[    2.156787] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    2.165063] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.172276] usb usb7: Product: Generic Platform OHCI controller
[    2.178203] usb usb7: Manufacturer: Linux 5.3.0-rc3 ohci_hcd
[    2.183868] usb usb7: SerialNumber: 1c1c400.usb
[    2.188863] hub 7-0:1.0: USB hub found
[    2.192653] hub 7-0:1.0: 1 port detected
[    2.197210] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
[    2.203856] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
[    2.211772] ohci-platform 1c1d400.usb: irq 34, io mem 0x01c1d400
[    2.286763] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    2.295038] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.302250] usb usb8: Product: Generic Platform OHCI controller
[    2.308177] usb usb8: Manufacturer: Linux 5.3.0-rc3 ohci_hcd
[    2.313841] usb usb8: SerialNumber: 1c1d400.usb
[    2.318825] hub 8-0:1.0: USB hub found
[    2.322620] hub 8-0:1.0: 1 port detected
[    2.327296] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    2.338385] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    2.344148] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 9
[    2.352124] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    2.360400] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.367626] usb usb9: Product: MUSB HDRC host driver
[    2.372594] usb usb9: Manufacturer: Linux 5.3.0-rc3 musb-hcd
[    2.378246] usb usb9: SerialNumber: musb-hdrc.1.auto
[    2.383656] hub 9-0:1.0: USB hub found
[    2.387431] hub 9-0:1.0: 1 port detected
[    2.393556] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:06 UTC (6)
[    2.401748] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.412575] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.419431] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.422640] vcc3v0: disabling
[    2.428050] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[    2.430997] vcc5v0: disabling
[    2.441706] ALSA device list:
[    2.445274]   No soundcards found.
[    2.454722] Freeing unused kernel memory: 1024K
[    2.472873] Run /init as init process
[    2.686540] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.872707] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.089703] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
[    3.097926] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.105075] usb 1-1: Product: USB2.0 Hub
[    3.110006] hub 1-1:1.0: USB hub found
[    3.114097] hub 1-1:1.0: 4 ports detected
[    3.158319] systemd[1]: System time before build time, advancing clock.
[    3.462790] usb 1-1.2: new high-speed USB device number 3 using ehci-platform
[    3.485138] NET: Registered protocol family 10
[    3.588332] Segment Routing with IPv6
[    3.632334] random: systemd: uninitialized urandom read (16 bytes read)
[    3.634509] usb 1-1.2: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[    3.650194] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.657700] usb 1-1.2: Product: USB2.0 Hub
[    3.662934] hub 1-1.2:1.0: USB hub found
[    3.667251] hub 1-1.2:1.0: 4 ports detected
[    3.676397] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.695141] systemd[1]: Detected architecture arm.
[    3.746817] systemd[1]: Set hostname to <bpi-m2z>.
[    3.833666] random: systemd: uninitialized urandom read (16 bytes read)
[    3.861410] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    4.002756] usb 1-1.2.1: new low-speed USB device number 4 using ehci-platform
[    4.181267] usb 1-1.2.1: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[    4.189909] usb 1-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.197448] usb 1-1.2.1: Product: USB Keyboard
[    4.201908] usb 1-1.2.1: Manufacturer: SIGMACHIP
[    4.251181] input: SIGMACHIP USB Keyboard as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:1C4F:0002.0001/input/input0
[    4.341819] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-1c1a000.usb-1.2.1/input0
[    4.385016] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:1C4F:0002.0002/input/input1
[    4.463251] input: SIGMACHIP USB Keyboard System Control as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:1C4F:0002.0002/input/input2
[    4.480839] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-1c1a000.usb-1.2.1/input1
[    4.589776] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.602647] usb 1-1.2.4: new low-speed USB device number 5 using ehci-platform
[    4.623185] systemd[1]: Listening on udev Control Socket.
[    4.653050] systemd[1]: Listening on udev Kernel Socket.
[    4.693298] systemd[1]: Listening on Journal Socket.
[    4.733818] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.769749] usb 1-1.2.4: New USB device found, idVendor=1bcf, idProduct=0007, bcdDevice= 0.10
[    4.778546] usb 1-1.2.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    4.790764] usb 1-1.2.4: Product: USB Optical Mouse
[    4.796084] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.817420] systemd[1]: Reached target Remote File Systems (Pre).
[    4.834741] input: USB Optical Mouse as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:1BCF:0007.0003/input/input3
[    4.866078] input: USB Optical Mouse as /devices/platform/soc/1c1a000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:1BCF:0007.0003/input/input4
[    4.879265] hid-generic 0003:1BCF:0007.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-1c1a000.usb-1.2.4/input0
[    5.318835] g_serial gadget: Gadget Serial v2.4
[    5.326677] g_serial gadget: g_serial ready
[    5.388367] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    5.396897] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
[    5.423664] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.sinovoip,bananapi zero.txt failed with error -2
[    5.435488] brcmfmac mmc1:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac43430-sdio.sinovoip,bananapi zero.txt
[    5.472486] Bluetooth: Core ver 2.22
[    5.476283] NET: Registered protocol family 31
[    5.480752] Bluetooth: HCI device and connection manager initialized
[    5.487221] Bluetooth: HCI socket layer initialized
[    5.492143] Bluetooth: L2CAP socket layer initialized
[    5.497322] Bluetooth: SCO socket layer initialized
[    5.517956] Bluetooth: HCI UART driver ver 2.3
[    5.522435] Bluetooth: HCI UART protocol H4 registered
[    5.528716] Bluetooth: HCI UART protocol BCSP registered
[    5.534238] Bluetooth: HCI UART protocol ATH3K registered
[    5.539941] Bluetooth: HCI UART protocol Intel registered
[    5.545407] Bluetooth: HCI UART protocol AG6XX registered
[    5.564276] Bluetooth: RFCOMM TTY layer initialized
[    5.571422] Bluetooth: RFCOMM socket layer initialized
[    5.576694] Bluetooth: RFCOMM ver 1.11
[    6.734847] systemd-journald[192]: Received request to flush runtime journal from PID 1
[    6.975814] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[    6.979937] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[    6.980830] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Mar 30 2016 11:30:56 version 7.45.77.h8.4 FWID 01-ee8a6268
[    7.129736] cfg80211: failed to load regulatory.db
[    7.233174] mc: Linux media interface: v0.10
[    7.247412] videodev: Linux video capture interface: v2.00
[    7.382509] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
[    7.388266] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[    7.404385] mali: loading out-of-tree module taints kernel.
[    7.407351] Registered IR keymap rc-empty
[    7.407575] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
[    7.407750] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input5
[    7.410662] sun4i-codec 1c22c00.codec: ASoC: codec-analog@1f015c0 not registered
[    7.418221] sun4i-codec 1c22c00.codec: Failed to register our card
[    7.419628] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[    7.434730] Allwinner sunXi mali glue initialized
[    7.439382] sunxi-ir 1f02000.ir: initialized sunXi IR driver
[    7.440757] Mali: 
[    7.440768] Found Mali GPU Mali-400 MP r1p1
[    7.445989] debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
[    7.458323] sun4i-codec 1c22c00.codec: ASoC: Failed to create component debugfs directory: -17
[    7.461835] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[    7.462517] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[    7.467602] sun8i-dw-hdmi 1ee0000.hdmi: 1ee0000.hdmi supply hvcc not found, using dummy regulator
[    7.469126] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    7.475356] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
[    7.475950] sun4i-drm display-engine: bound 1ee0000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
[    7.475969] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.475974] [drm] No driver support for vblank timestamp query.
[    7.478008] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[    7.478173] Mali: 
[    7.478182] 2+0 PP cores initialized
[    7.479488] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
[    7.480990] Mali: 
[    7.480998] Mali device driver loaded
[    8.069011] Console: switching to colour frame buffer device 240x67
[    8.111624] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
[    8.284010] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok
[    8.879551] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    9.506281] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY]
[    9.506313] dwmac-sun8i 1c30000.ethernet eth0: phy: setting supported 00,00000000,000062cf advertising 00,00000000,000062cf
[    9.509364] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
[    9.509387] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
[    9.509397] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
[    9.509415] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
[    9.509440] dwmac-sun8i 1c30000.ethernet eth0: phylink_mac_config: mode=phy/mii/Unknown/Unknown adv=00,00000000,000062cf pause=10 link=0 an=1
[    9.510395] dwmac-sun8i 1c30000.ethernet eth0: phy link down mii/Unknown/Unknown
[   10.440472] zram: Added device: zram0
[   10.444090] zram: Added device: zram1
[   10.445094] zram: Added device: zram2
[   10.446163] zram: Added device: zram3
[   10.580065] zram0: detected capacity change from 0 to 64770048
[   10.852744] Adding 63248k swap on /dev/zram0.  Priority:5 extents:1 across:63248k SS
[   10.855523] zram1: detected capacity change from 0 to 64770048
[   10.962833] Adding 63248k swap on /dev/zram1.  Priority:5 extents:1 across:63248k SS
[   10.964647] zram2: detected capacity change from 0 to 64770048
[   11.074647] Adding 63248k swap on /dev/zram2.  Priority:5 extents:1 across:63248k SS
[   11.101006] zram3: detected capacity change from 0 to 64770048
[   11.192676] Adding 63248k swap on /dev/zram3.  Priority:5 extents:1 across:63248k SS
[   11.460152] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  189.860538] random: crng init done
[  189.860584] random: 7 urandom warning(s) missed due to ratelimiting