Compiled with gcc 9.2.1

Mainline Kernel 5.3.0-rc7 NanoPi M4

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.3.0-rc7 (ubuntu@nanopi-m4) (gcc version 9.2.1 20190827 (Ubuntu 9.2.1-6ubuntu1)) #1 SMP PREEMPT Fri Sep 6 22:12:47 UTC 2019
[    0.000000] Machine model: FriendlyElec NanoPi M4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x7da91840-0x7da92fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] On node 0 totalpages: 523776
[    0.000000]   DMA32 zone: 8184 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 523776 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu s56728 r8192 d29288 u94208
[    0.000000] pcpu-alloc: s56728 r8192 d29288 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 515592
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1994244K/2095104K available (11324K kernel code, 1786K rwdata, 5992K rodata, 4992K init, 445K bss, 68092K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7b080000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x000000007b040000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007b050000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x300/0x494 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000011] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003888] Console: colour dummy device 80x25
[    0.005233] printk: console [tty0] enabled
[    0.005410] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005470] pid_max: default: 32768 minimum: 301
[    0.005668] LSM: Security Framework initializing
[    0.005815] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.005875] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.007679] cpu0 capacity: /cpus/cpu@0
[    0.031986] ASID allocator initialised with 32768 entries
[    0.039984] rcu: Hierarchical SRCU implementation.
[    0.048160] Platform MSI: interrupt-controller@fee20000 domain created
[    0.048714] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.056866] EFI services will not be available.
[    0.061758] smp: Bringing up secondary CPUs ...
[    0.094047] Detected VIPT I-cache on CPU1
[    0.094098] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.094117] GICv3: CPU1: using allocated LPI pending table @0x000000007b060000
[    0.094174] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.126169] Detected VIPT I-cache on CPU2
[    0.126209] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.126226] GICv3: CPU2: using allocated LPI pending table @0x000000007b070000
[    0.126270] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.158316] Detected VIPT I-cache on CPU3
[    0.158355] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.158372] GICv3: CPU3: using allocated LPI pending table @0x000000007b100000
[    0.158414] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.193121] CPU features: detected: EL2 vector hardening
[    0.193418] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.193812] Detected PIPT I-cache on CPU4
[    0.195029] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.195472] GICv3: CPU4: using allocated LPI pending table @0x000000007b110000
[    0.196626] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.236839] Detected PIPT I-cache on CPU5
[    0.238012] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.238438] GICv3: CPU5: using allocated LPI pending table @0x000000007b120000
[    0.239468] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.244589] smp: Brought up 1 node, 6 CPUs
[    0.245202] SMP: Total of 6 processors activated.
[    0.245248] CPU features: detected: 32-bit EL0 Support
[    0.245291] CPU features: detected: CRC32 instructions
[    0.259821] CPU: All CPU(s) started at EL2
[    0.260574] alternatives: patching kernel code
[    0.265559] devtmpfs: initialized
[    0.289612] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.289786] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.293306] pinctrl core: initialized pinctrl subsystem
[    0.297348] DMI not present or invalid.
[    0.298266] NET: Registered protocol family 16
[    0.301932] audit: initializing netlink subsys (disabled)
[    0.302457] audit: type=2000 audit(0.296:1): state=initialized audit_enabled=0 res=1
[    0.306044] cpuidle: using governor menu
[    0.307042] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.318609] DMA: preallocated 256 KiB pool for atomic allocations
[    0.322725] Serial: AMBA PL011 UART driver
[    0.411708] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.411838] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.411973] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.412011] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.433967] cryptd: max_cpu_qlen set to 1000
[    0.465553] ACPI: Interpreter disabled.
[    0.472035] vcc5v0_core: supplied by vdd_5v
[    0.472574] vcc5v0_sys: supplied by vdd_5v
[    0.472711] vbus_typec: supplied by vdd_5v
[    0.473005] vcc5v0_usb1: supplied by vcc5v0_sys
[    0.473352] vcc3v3_sys: supplied by vcc5v0_core
[    0.473478] vcc3v0_sd: supplied by vcc3v3_sys
[    0.473790] vcc5v0_usb2: supplied by vcc5v0_sys
[    0.481532] vgaarb: loaded
[    0.482503] SCSI subsystem initialized
[    0.484166] libata version 3.00 loaded.
[    0.484898] usbcore: registered new interface driver usbfs
[    0.485006] usbcore: registered new interface driver hub
[    0.485310] usbcore: registered new device driver usb
[    0.488054] pps_core: LinuxPPS API ver. 1 registered
[    0.488096] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.488166] PTP clock support registered
[    0.488583] EDAC MC: Ver: 3.0.0
[    0.492843] FPGA manager framework
[    0.493103] Advanced Linux Sound Architecture Driver Initialized.
[    0.496084] clocksource: Switched to clocksource arch_sys_counter
[    0.496936] VFS: Disk quotas dquot_6.6.0
[    0.497087] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.497688] pnp: PnP ACPI: disabled
[    0.511355] thermal_sys: Registered thermal governor 'step_wise'
[    0.511384] thermal_sys: Registered thermal governor 'power_allocator'
[    0.512713] NET: Registered protocol family 2
[    0.513749] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.513871] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.514250] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.514853] TCP: Hash tables configured (established 16384 bind 16384)
[    0.515155] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.515304] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.516661] NET: Registered protocol family 1
[    0.519375] RPC: Registered named UNIX socket transport module.
[    0.519412] RPC: Registered udp transport module.
[    0.519440] RPC: Registered tcp transport module.
[    0.519467] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.519508] PCI: CLS 0 bytes, default 64
[    0.520578] Unpacking initramfs...
[    0.633278] Freeing initrd memory: 1076K
[    0.644031] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.646700] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.647938] kvm [1]: IPA Size Limit: 40bits
[    0.650000] kvm [1]: vgic-v2@fff20000
[    0.650323] kvm [1]: GIC system register CPU interface enabled
[    0.652469] kvm [1]: vgic interrupt IRQ10
[    0.654424] kvm [1]: Hyp mode initialized successfully
[    0.679089] Initialise system trusted keyrings
[    0.680189] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.695571] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.698835] NFS: Registering the id_resolver key type
[    0.698949] Key type id_resolver registered
[    0.698978] Key type id_legacy registered
[    0.699018] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.743396] Key type asymmetric registered
[    0.743465] Asymmetric key parser 'x509' registered
[    0.743643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.743685] io scheduler mq-deadline registered
[    0.743714] io scheduler kyber registered
[    0.797012] EINJ: ACPI disabled.
[    0.815259] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.815385] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.818419] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.818479] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.845236] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.850454] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[    0.851014] serial serial0: tty port ttyS0 registered
[    0.852574] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[    0.950362] printk: console [ttyS2] enabled
[    0.955330] SuperH (H)SCI(F) driver initialized
[    0.958172] msm_serial: driver initialized
[    0.962618] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.979807] loop: module loaded
[    0.995784] libphy: Fixed MDIO Bus: probed
[    0.996997] tun: Universal TUN/TAP device driver, 1.6
[    1.001196] thunder_xcv, ver 1.0
[    1.001592] thunder_bgx, ver 1.0
[    1.002041] nicpf, ver 1.0
[    1.004620] hclge is initializing
[    1.004945] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.005609] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.006277] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.006815] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.007436] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.008123] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.008762] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.009483] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.011157] sky2: driver version 1.30
[    1.014299] VFIO - User Level meta-driver version: 0.3
[    1.027654] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    1.044371] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.045063] ehci-pci: EHCI PCI platform driver
[    1.045572] ehci-platform: EHCI generic platform driver
[    1.048892] ehci-platform fe380000.usb: EHCI Host Controller
[    1.049484] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    1.050633] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    1.064044] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.066451] hub 1-0:1.0: USB hub found
[    1.066859] hub 1-0:1.0: 1 port detected
[    1.070472] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.071036] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    1.072075] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    1.087851] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.089641] hub 2-0:1.0: USB hub found
[    1.090047] hub 2-0:1.0: 1 port detected
[    1.091519] ehci-orion: EHCI orion driver
[    1.092493] ehci-exynos: EHCI EXYNOS driver
[    1.093235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.093911] ohci-pci: OHCI PCI platform driver
[    1.094450] ohci-platform: OHCI generic platform driver
[    1.095399] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.096195] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    1.097405] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    1.161418] hub 3-0:1.0: USB hub found
[    1.161831] hub 3-0:1.0: 1 port detected
[    1.163270] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.163968] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    1.164932] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    1.229012] hub 4-0:1.0: USB hub found
[    1.229439] hub 4-0:1.0: 1 port detected
[    1.230833] ohci-exynos: OHCI EXYNOS driver
[    1.233343] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.233927] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    1.234918] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.235958] xhci-hcd xhci-hcd.0.auto: irq 225, io mem 0xfe800000
[    1.238457] hub 5-0:1.0: USB hub found
[    1.238866] hub 5-0:1.0: 1 port detected
[    1.240059] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.240591] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    1.241315] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.242038] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.243827] hub 6-0:1.0: USB hub found
[    1.244234] hub 6-0:1.0: 1 port detected
[    1.245479] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.246021] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    1.246976] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.248159] xhci-hcd xhci-hcd.1.auto: irq 226, io mem 0xfe900000
[    1.250130] hub 7-0:1.0: USB hub found
[    1.250538] hub 7-0:1.0: 1 port detected
[    1.251483] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.252052] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    1.252776] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.253524] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.255284] hub 8-0:1.0: USB hub found
[    1.255690] hub 8-0:1.0: 1 port detected
[    1.257857] usbcore: registered new interface driver usb-storage
[    1.269176] i2c /dev entries driver
[    1.278606] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.279371] fan53555-reg: supplied by vcc3v3_sys
[    1.282652] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.283326] fan53555-reg: supplied by vcc3v3_sys
[    1.286259] rk808 0-001b: chip id: 0x0
[    1.293974] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.294651] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.295342] DCDC_REG1: supplied by vcc3v3_sys
[    1.297485] DCDC_REG2: supplied by vcc3v3_sys
[    1.298762] DCDC_REG3: supplied by vcc3v3_sys
[    1.299647] DCDC_REG4: supplied by vcc3v3_sys
[    1.300942] LDO_REG1: supplied by vcc3v3_sys
[    1.302901] LDO_REG2: supplied by vcc3v3_sys
[    1.304615] LDO_REG3: supplied by vcc3v3_sys
[    1.306477] LDO_REG4: supplied by vcc3v3_sys
[    1.308330] LDO_REG5: supplied by vcc3v3_sys
[    1.310010] LDO_REG6: supplied by vcc3v3_sys
[    1.311902] LDO_REG7: supplied by vcc3v3_sys
[    1.313577] LDO_REG8: supplied by vcc3v3_sys
[    1.315420] SWITCH_REG1: supplied by vcc3v3_sys
[    1.316480] SWITCH_REG2: supplied by vcc3v3_sys
[    1.341948] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[    1.343120] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[    1.345912] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[    1.348420] random: fast init done
[    1.349098] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[    1.352756] sdhci: Secure Digital Host Controller Interface driver
[    1.353308] sdhci: Copyright(c) Pierre Ossman
[    1.354107] Synopsys Designware Multimedia Card Interface Driver
[    1.355430] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.356096] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.356700] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.357244] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    1.358183] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.358709] mmc_host mmc0: card is non-removable.
[    1.372185] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.386065] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.386740] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.387343] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.387916] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    1.388909] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[    1.399954] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.412971] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.414751] mmc2: CQHCI version 5.10
[    1.419156] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.421333] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.423325] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.426529] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.439788] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.442337] ledtrig-cpu: registered to indicate activity on CPUs
[    1.444054] usbcore: registered new interface driver usbhid
[    1.444553] usbhid: USB HID core driver
[    1.449162] NET: Registered protocol family 17
[    1.449627] Key type dns_resolver registered
[    1.450577] registered taskstats version 1
[    1.450944] Loading compiled-in X.509 certificates
[    1.468997] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.469925] hctosys: unable to open rtc device (rtc0)
[    1.471096] vcc1v8_s3: supplied by vcc_1v8
[    1.471551] ALSA device list:
[    1.471837]   No soundcards found.
[    1.472301] ttyS2 - failed to request DMA
[    1.474279] Freeing unused kernel memory: 4992K
[    1.479886] Run /init as init process
[    1.482492] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    1.492091] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    1.587956] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    1.740226] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 190
[    1.742102] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    1.763395] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 206
[    1.764058] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    1.765997] mmcblk1: mmc1:aaaa SB32G 29.7 GiB 
[    1.768834]  mmcblk1: p1 p2
[    1.798110] hub 7-1:1.0: USB hub found
[    1.798665] hub 7-1:1.0: 4 ports detected
[    1.892631] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.006122] hub 8-1:1.0: USB hub found
[    2.006817] hub 8-1:1.0: 4 ports detected
[    2.571953] usb 7-1.4: new high-speed USB device number 3 using xhci-hcd
[    2.758124] hub 7-1.4:1.0: USB hub found
[    2.758924] hub 7-1.4:1.0: 4 ports detected
[    3.047954] usb 7-1.4.1: new low-speed USB device number 4 using xhci-hcd
[    3.241312] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.1/7-1.4.1:1.0/0003:1C4F:0002.0001/input/input1
[    3.300362] hid-generic 0003:1C4F:0002.0001: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.1/input0
[    3.305490] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.1/7-1.4.1:1.1/0003:1C4F:0002.0002/input/input2
[    3.364296] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.1/7-1.4.1:1.1/0003:1C4F:0002.0002/input/input3
[    3.366147] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.1/input1
[    3.447952] usb 7-1.4.4: new low-speed USB device number 5 using xhci-hcd
[    3.594487] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.4/7-1.4.4:1.0/0003:1BCF:0007.0003/input/input4
[    3.596112] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.4/7-1.4.4:1.0/0003:1BCF:0007.0003/input/input5
[    3.597798] hid-generic 0003:1BCF:0007.0003: input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-xhci-hcd.1.auto-1.4.4/input0
[    6.532468] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[    6.822960] systemd[1]: System time before build time, advancing clock.
[    7.138335] NET: Registered protocol family 10
[    7.139174] Segment Routing with IPv6
[    7.186184] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    7.188354] systemd[1]: Detected architecture arm64.
[    7.202971] systemd[1]: Set hostname to <nanopi-m4>.
[    7.204383] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    7.359127] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    7.360633] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    7.489262] random: systemd: uninitialized urandom read (16 bytes read)
[    7.492991] random: systemd: uninitialized urandom read (16 bytes read)
[    7.493768] systemd[1]: Listening on udev Kernel Socket.
[    7.504025] random: systemd: uninitialized urandom read (16 bytes read)
[    7.505586] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    7.516255] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.528533] systemd[1]: Created slice User and Session Slice.
[    7.612032] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[    7.811910] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[    8.294613] rk808-rtc rk808-rtc: registered as rtc0
[    8.384218] systemd-journald[254]: Received request to flush runtime journal from PID 1
[    8.437420] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    8.437432] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    8.437440] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    8.437449] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    8.647075] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    8.647135] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    8.647139] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    8.647141] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    8.647146] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    8.647163] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    8.647801] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    8.652808] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    8.652913] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    8.652916] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    8.652919] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    8.652921] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    8.652923] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    8.652926] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    8.652927] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    8.652942] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    8.652944] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    8.652946] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    8.652951] rk_gmac-dwmac fe300000.ethernet: device MAC address 96:29:4d:be:35:e5
[    8.711787] libphy: stmmac: probed
[    8.915466] Bluetooth: Core ver 2.22
[    8.915567] NET: Registered protocol family 31
[    8.915570] Bluetooth: HCI device and connection manager initialized
[    8.915586] Bluetooth: HCI socket layer initialized
[    8.915592] Bluetooth: L2CAP socket layer initialized
[    8.915605] Bluetooth: SCO socket layer initialized
[    8.963822] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    8.964493] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    9.118152] Bluetooth: HCI UART driver ver 2.3
[    9.118157] Bluetooth: HCI UART protocol H4 registered
[    9.118190] Bluetooth: HCI UART protocol LL registered
[    9.118382] Bluetooth: HCI UART protocol Broadcom registered
[    9.131239] panfrost ff9a0000.gpu: clock rate = 500000000
[    9.131450] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[    9.131454] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[    9.131457] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    9.131460] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[    9.133456] [drm] Initialized panfrost 1.0.0 20180908 for ff9a0000.gpu on minor 0
[    9.135951] ttyS0 - failed to request DMA
[    9.241198] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[    9.241469] rockchip-vop ff900000.vop: Adding to iommu group 2
[    9.244669] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[    9.246182] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[    9.246272] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    9.247008] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[    9.247013] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.247015] [drm] No driver support for vblank timestamp query.
[    9.313443] Console: switching to colour frame buffer device 240x67
[    9.352856] Bluetooth: hci0: BCM: chip id 101
[    9.353158] Bluetooth: hci0: BCM: features 0x2f
[    9.353203] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[    9.354166] Bluetooth: hci0: BCM4354A2
[    9.354174] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[    9.377165] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[    9.380218] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[    9.642441] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
[    9.642449] rk_gmac-dwmac fe300000.ethernet eth0: phy: setting supported 00,00000000,000062ff advertising 00,00000000,000062ff
[    9.651775] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[    9.651786] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[    9.651793] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[    9.651799] rk_gmac-dwmac fe300000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/Unknown/Unknown adv=00,00000000,000062ff pause=10 link=0 an=1
[    9.653011] rk_gmac-dwmac fe300000.ethernet eth0: phy link down rgmii/Unknown/Unknown
[   10.068500] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[   12.039878] random: crng init done
[   12.039884] random: 7 urandom warning(s) missed due to ratelimiting
[   12.071742] rk_gmac-dwmac fe300000.ethernet eth0: phylink_mac_config: mode=phy/rgmii/1Gbps/Full adv=00,00000000,00000000 pause=0f link=1 an=0
[   12.071746] rk_gmac-dwmac fe300000.ethernet eth0: phy link up rgmii/1Gbps/Full
[   12.071840] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   12.071872] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready