Skip to content

Instantly share code, notes, and snippets.

@avafinger

avafinger/HDMI sound broken (distro issue?)

Last active February 2, 2021 00:32
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save avafinger/7b08a83ca596d6ad5af2033720d04664 to your computer and use it in GitHub Desktop.
Save avafinger/7b08a83ca596d6ad5af2033720d04664 to your computer and use it in GitHub Desktop.
Download ZIP
Dual Camera ov4689
Raw
HDMI sound broken (distro issue?)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Linux version 5.11.0-rc6 (alex@svn) (aarch64-linux-gnu-gcc (Linaro GCC 7.5-2019.12-rc1) 7.5.0, GNU ld (Linaro_Binutils-2019.12-rc1) 2.28.2.20170706) #2 SMP PREEMPT Mon Feb 1 17:57:17 -03 2021
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Machine model: FriendlyElec NanoPi M4
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] efi: UEFI not found.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] NUMA: No NUMA configuration found
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] NUMA: NODE_DATA [mem 0x7fba1100-0x7fba2fff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Zone ranges:
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] DMA32 empty
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Normal empty
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Movable zone start for each node
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Early memory node ranges
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] On node 0 totalpages: 523776
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] DMA zone: 8184 pages used for memmap
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] DMA zone: 0 pages reserved
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] DMA zone: 523776 pages, LIFO batch:63
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] cma: Reserved 128 MiB at 0x0000000071c00000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] psci: probing for conduit method from DT.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] psci: PSCIv1.0 detected in firmware.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] psci: SMC Calling Convention v1.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] percpu: Embedded 23 pages/cpu s55320 r8192 d30696 u94208
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] pcpu-alloc: s55320 r8192 d30696 u94208 alloc=23*4096
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Detected VIPT I-cache on CPU0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] CPU features: detected: ARM erratum 845719
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] CPU features: detected: GIC system register CPU interface
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Policy zone: DMA
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Memory: 1900140K/2095104K available (12608K kernel code, 1676K rwdata, 4640K rodata, 2304K init, 498K bss, 63892K reserved, 131072K cma-reserved)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] Trampoline variant of Tasks RCU enabled.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: 256 SPIs implemented
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: 0 Extended SPIs implemented
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: Distributor has no Range Selector support
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: 16 PPIs implemented
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] ITS: using cache flushing for cmd queue
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: using LPI property table @0x0000000000440000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GIC: using cache flushing for LPI property table
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000450000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] random: get_random_bytes called from start_kernel+0x618/0x7e4 with crng_init=0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.001708] Console: colour dummy device 80x25
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003025] printk: console [tty0] enabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003205] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003274] pid_max: default: 32768 minimum: 301
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003560] LSM: Security Framework initializing
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003723] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.003793] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.007380] rcu: Hierarchical SRCU implementation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.007994] Platform MSI: interrupt-controller@fee20000 domain created
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.008632] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.011666] EFI services will not be available.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.012310] smp: Bringing up secondary CPUs ...
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.013304] Detected VIPT I-cache on CPU1
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.013364] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.013395] GICv3: CPU1: using allocated LPI pending table @0x0000000000460000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.013479] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.014601] Detected VIPT I-cache on CPU2
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.014651] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.014677] GICv3: CPU2: using allocated LPI pending table @0x0000000000470000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.014738] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.015882] Detected VIPT I-cache on CPU3
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.015932] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.015957] GICv3: CPU3: using allocated LPI pending table @0x0000000000500000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.016016] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.019637] CPU features: detected: Spectre-v3a
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.020335] CPU features: detected: Spectre-v2
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.020638] CPU features: detected: Spectre-v4
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.020891] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.021238] Detected PIPT I-cache on CPU4
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.022515] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.023276] GICv3: CPU4: using allocated LPI pending table @0x0000000000510000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.024907] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.034203] Detected PIPT I-cache on CPU5
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.035633] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.036343] GICv3: CPU5: using allocated LPI pending table @0x0000000000520000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.037766] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.043272] smp: Brought up 1 node, 6 CPUs
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.044069] SMP: Total of 6 processors activated.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.044117] CPU features: detected: 32-bit EL0 Support
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.044172] CPU features: detected: CRC32 instructions
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.044212] CPU features: detected: 32-bit EL1 Support
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.237927] CPU: All CPU(s) started at EL2
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.239217] alternatives: patching kernel code
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.244724] devtmpfs: initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.274559] KASLR disabled due to lack of seed
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.275343] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.275443] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.285759] pinctrl core: initialized pinctrl subsystem
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.287466] DMI not present or invalid.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.289219] NET: Registered protocol family 16
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.304360] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.309912] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.310557] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.310792] audit: initializing netlink subsys (disabled)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.311353] audit: type=2000 audit(0.308:1): state=initialized audit_enabled=0 res=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.314042] thermal_sys: Registered thermal governor 'step_wise'
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.316231] cpuidle: using governor menu
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.317168] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.319186] ASID allocator initialised with 65536 entries
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.322138] Serial: AMBA PL011 UART driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.429580] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.429881] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.429925] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.429966] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.438170] cryptd: max_cpu_qlen set to 1000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.454108] ACPI: Interpreter disabled.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.461009] vcc5v0_sys: supplied by vdd_5v
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.461435] vbus_typec: supplied by vdd_5v
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.461557] vcc5v0_core: supplied by vdd_5v
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.462220] vcc3v3_sys: supplied by vcc5v0_core
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.462365] vcc3v0_sd: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.462555] vcc5v0_usb1: supplied by vcc5v0_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.463254] vcc5v0_usb2: supplied by vcc5v0_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.467931] iommu: Default domain type: Translated
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.474055] vgaarb: loaded
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.474993] SCSI subsystem initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.476311] libata version 3.00 loaded.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.476823] usbcore: registered new interface driver usbfs
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.476946] usbcore: registered new interface driver hub
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.477056] usbcore: registered new device driver usb
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.478163] pps_core: LinuxPPS API ver. 1 registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.478205] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.478278] PTP clock support registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.478730] EDAC MC: Ver: 3.0.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.481475] FPGA manager framework
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.481747] Advanced Linux Sound Architecture Driver Initialized.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483178] Bluetooth: Core ver 2.22
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483360] NET: Registered protocol family 31
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483395] Bluetooth: HCI device and connection manager initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483444] Bluetooth: HCI socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483485] Bluetooth: L2CAP socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.483545] Bluetooth: SCO socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.486602] clocksource: Switched to clocksource arch_sys_counter
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.487136] VFS: Disk quotas dquot_6.6.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.487315] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.488037] pnp: PnP ACPI: disabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.504438] NET: Registered protocol family 2
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.505968] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.506243] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.506610] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.507210] TCP: Hash tables configured (established 16384 bind 16384)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.507606] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.508157] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.509761] NET: Registered protocol family 1
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.511526] RPC: Registered named UNIX socket transport module.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.511576] RPC: Registered udp transport module.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.511608] RPC: Registered tcp transport module.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.511639] RPC: Registered tcp NFSv4.1 backchannel transport module.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.511686] PCI: CLS 0 bytes, default 64
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.512195] Unpacking initramfs...
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.631568] Freeing initrd memory: 1128K
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.644375] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.648196] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.649941] kvm [1]: IPA Size Limit: 40 bits
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.652904] kvm [1]: vgic-v2@fff20000
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.653159] kvm [1]: GIC system register CPU interface enabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.656884] kvm [1]: vgic interrupt IRQ18
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.659625] kvm [1]: Hyp mode initialized successfully
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.672125] Initialise system trusted keyrings
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.672505] Key type blacklist registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.673185] workingset: timestamp_bits=44 max_order=19 bucket_order=0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.690085] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.692948] NFS: Registering the id_resolver key type
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.693102] Key type id_resolver registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.693136] Key type id_legacy registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.693380] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.803806] Key type asymmetric registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.803906] Asymmetric key parser 'x509' registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.804031] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.804085] io scheduler mq-deadline registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.804119] io scheduler kyber registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.838809] EINJ: ACPI disabled.
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.844612] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.844825] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.848003] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.848085] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.861250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.866788] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 47, base_baud = 1500000) is a 16550A
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.867446] serial serial0: tty port ttyS0 registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.869145] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 48, base_baud = 1500000) is a 16550A
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.970533] printk: console [ttyS2] enabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.976520] cacheinfo: Unable to detect cache hierarchy for CPU 0
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.995854] loop: module loaded
Feb 1 21:35:14 nanopi-m4 kernel: [ 0.997576] zram: Added device: zram0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.006558] libphy: Fixed MDIO Bus: probed
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.008109] tun: Universal TUN/TAP device driver, 1.6
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.011155] thunder_xcv, ver 1.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.011604] thunder_bgx, ver 1.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.011995] nicpf, ver 1.0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.013896] hclge is initializing
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.014313] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.014990] hns3: Copyright (c) 2017 Huawei Corporation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.015597] e1000e: Intel(R) PRO/1000 Network Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.016063] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.016697] igb: Intel(R) Gigabit Ethernet Network Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.017202] igb: Copyright (c) 2007-2014 Intel Corporation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.017786] igbvf: Intel(R) Gigabit Virtual Function Network Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.018397] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.019382] sky2: driver version 1.30
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.020983] VFIO - User Level meta-driver version: 0.3
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.031723] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.047955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.048807] ehci-pci: EHCI PCI platform driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.049300] ehci-platform: EHCI generic platform driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.053000] ehci-platform fe380000.usb: EHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.053597] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.054936] ehci-platform fe380000.usb: irq 39, io mem 0xfe380000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.070370] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.071372] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.072156] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.072835] usb usb1: Product: EHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.073299] usb usb1: Manufacturer: Linux 5.11.0-rc6 ehci_hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.073839] usb usb1: SerialNumber: fe380000.usb
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.075588] hub 1-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.076101] hub 1-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.080043] ehci-platform fe3c0000.usb: EHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.080623] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.081674] ehci-platform fe3c0000.usb: irq 41, io mem 0xfe3c0000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.098214] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.099123] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.099905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.100585] usb usb2: Product: EHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.101049] usb usb2: Manufacturer: Linux 5.11.0-rc6 ehci_hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.101589] usb usb2: SerialNumber: fe3c0000.usb
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.102992] hub 2-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.103412] hub 2-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.105265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.105892] ohci-pci: OHCI PCI platform driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.106481] ohci-platform: OHCI generic platform driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.107681] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.108356] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.109436] ohci-platform fe3a0000.usb: irq 40, io mem 0xfe3a0000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.170668] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.171452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.172133] usb usb3: Product: Generic Platform OHCI controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.172690] usb usb3: Manufacturer: Linux 5.11.0-rc6 ohci_hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.173230] usb usb3: SerialNumber: fe3a0000.usb
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.174649] hub 3-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.175078] hub 3-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.176869] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.177529] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.178650] ohci-platform fe3e0000.usb: irq 42, io mem 0xfe3e0000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.242522] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.243304] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.243983] usb usb4: Product: Generic Platform OHCI controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.244539] usb usb4: Manufacturer: Linux 5.11.0-rc6 ohci_hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.245080] usb usb4: SerialNumber: fe3e0000.usb
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.246493] hub 4-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.246931] hub 4-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.250591] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.251227] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.252288] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.253251] xhci-hcd xhci-hcd.0.auto: irq 79, io mem 0xfe800000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.254831] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.255613] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.256294] usb usb5: Product: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.256757] usb usb5: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.257300] usb usb5: SerialNumber: xhci-hcd.0.auto
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.258817] hub 5-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.259250] hub 5-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.260292] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.260843] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.261573] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.262411] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.263413] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.264193] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.264873] usb usb6: Product: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.265337] usb usb6: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.265877] usb usb6: SerialNumber: xhci-hcd.0.auto
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.267305] hub 6-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.267738] hub 6-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.269234] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.269793] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.270901] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.272003] xhci-hcd xhci-hcd.1.auto: irq 80, io mem 0xfe900000
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.273228] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.274011] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.274738] usb usb7: Product: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.275205] usb usb7: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.275745] usb usb7: SerialNumber: xhci-hcd.1.auto
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.277114] hub 7-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.277533] hub 7-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.278785] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.279342] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.280073] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.280869] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.281851] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.282670] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.283351] usb usb8: Product: xHCI Host Controller
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.283815] usb usb8: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.284357] usb usb8: SerialNumber: xhci-hcd.1.auto
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.285725] hub 8-0:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.286201] hub 8-0:1.0: 1 port detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.287691] usbcore: registered new interface driver usb-storage
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.295357] i2c /dev entries driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.307913] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.310507] vdd_cpu_b: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.313179] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.315549] vdd_gpu: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.319872] rk808 0-001b: chip id: 0x0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.328482] rk808-regulator rk808-regulator: there is no dvs0 gpio
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.329251] rk808-regulator rk808-regulator: there is no dvs1 gpio
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.331151] vdd_center: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.332505] vdd_cpu_l: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.333387] vcc_ddr: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.334705] vcc_1v8: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.336644] vcc1v8_cam: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.338371] vcc3v0_touch: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.340237] vcc1v8_pmupll: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.342046] vcc_sdio: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.343794] vcca3v0_codec: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.345670] vcc_1v5: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.347392] vcca1v8_codec: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.349249] vcc_3v0: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.350143] vcc3v3_s3: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.351241] vcc3v3_s0: supplied by vcc3v3_sys
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.360592] dw_wdt ff848000.watchdog: No valid TOPs array specified
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.369118] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 400000 KHz, changing to: 408000 KHz
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.373301] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 12000 KHz, changing to: 408000 KHz
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.376708] sdhci: Secure Digital Host Controller Interface driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.377255] sdhci: Copyright(c) Pierre Ossman
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.377733] Synopsys Designware Multimedia Card Interface Driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.378737] sdhci-pltfm: SDHCI platform and OF driver helper
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379092] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379092] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379113] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379121] dwmmc_rockchip fe310000.mmc: Version ID is 270a
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379167] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379423] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.379862] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.380312] mmc2: CQHCI version 5.10
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.380490] mmc_host mmc0: card is non-removable.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.381061] dwmmc_rockchip fe320000.mmc: Version ID is 270a
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.384699] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.385710] dwmmc_rockchip fe320000.mmc: Got CD GPIO
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.386302] ledtrig-cpu: registered to indicate activity on CPUs
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.387120] hid: raw HID events driver (C) Jiri Kosina
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.387766] usbcore: registered new interface driver usbhid
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.388255] usbhid: USB HID core driver
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.389981] NET: Registered protocol family 17
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.390747] Bluetooth: RFCOMM TTY layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.391179] Bluetooth: RFCOMM socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.391638] Bluetooth: RFCOMM ver 1.11
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.391972] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.392492] Bluetooth: HIDP socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.392958] Key type dns_resolver registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.393631] registered taskstats version 1
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.393995] Loading compiled-in X.509 certificates
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.394419] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.399235] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.406083] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.408414] input: gpio-keys as /devices/platform/gpio-keys/input/input0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.409614] ALSA device list:
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.409883] No soundcards found.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.410317] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.410339] random: fast init done
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.412398] Freeing unused kernel memory: 2304K
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434448] Run /init as init process
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434785] with arguments:
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434786] /init
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434789] earlyprintk
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434791] with environment:
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434793] HOME=/
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.434795] TERM=linux
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.443225] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.445478] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.447814] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.451348] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.491228] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.505974] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.614280] usb 7-1: new high-speed USB device number 2 using xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.672037] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 181
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.675939] mmc0: new ultra high speed SDR104 SDIO card at address 0001
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.767490] usb 7-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 0.50
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.768220] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.768846] usb 7-1: Product: USB2.0 Hub
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.769289] usb 7-1: Manufacturer: VIA Labs, Inc.
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.780050] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 202
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.780662] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.782045] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.785661] mmcblk1: p1 p2
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.825238] hub 7-1:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.825804] hub 7-1:1.0: 4 ports detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 1.920034] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.014513] usb 8-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 0.50
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.015243] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.015868] usb 8-1: Product: USB3.0 Hub
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.016312] usb 8-1: Manufacturer: VIA Labs, Inc.
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.049515] hub 8-1:1.0: USB hub found
Feb 1 21:35:14 nanopi-m4 kernel: [ 2.050265] hub 8-1:1.0: 4 ports detected
Feb 1 21:35:14 nanopi-m4 kernel: [ 6.504230] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null). Quota mode: none.
Feb 1 21:35:14 nanopi-m4 kernel: [ 7.148356] NET: Registered protocol family 10
Feb 1 21:35:14 nanopi-m4 kernel: [ 7.149623] Segment Routing with IPv6
Feb 1 21:35:14 nanopi-m4 kernel: [ 7.703666] random: systemd: uninitialized urandom read (16 bytes read)
Feb 1 21:35:14 nanopi-m4 kernel: [ 7.718578] random: systemd: uninitialized urandom read (16 bytes read)
Feb 1 21:35:14 nanopi-m4 kernel: [ 7.730564] random: systemd: uninitialized urandom read (16 bytes read)
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.113535] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.841754] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.841805] OF: /pcie@f8000000: Missing device_type
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.841823] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.841837] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.842537] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.842567] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.842593] vcc1v8_s3: supplied by vcc_1v8
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.842670] vcca1v8_s3: supplied by vcc1v8_s3
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.842940] vcca0v9_s3: supplied by vcc1v8_s3
Feb 1 21:35:14 nanopi-m4 kernel: [ 8.953257] rt5651 1-001a: Failed to reguest IRQ 0: -22
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.094398] mc: Linux media interface: v0.10
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.127840] rk808-rtc rk808-rtc: registered as rtc0
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.128382] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:18 UTC (1358499018)
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.254692] Bluetooth: HCI UART driver ver 2.3
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.254717] Bluetooth: HCI UART protocol H4 registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.254792] Bluetooth: HCI UART protocol LL registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.255087] Bluetooth: HCI UART protocol Broadcom registered
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.343205] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.344353] rockchip-pcie: probe of f8000000.pcie failed with error -110
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.374295] dw-apb-uart ff180000.serial: failed to request DMA
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.468899] videodev: Linux video capture interface: v2.00
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608054] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608073] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608172] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608374] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608381] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608388] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608398] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.608430] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.609059] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614070] rk_gmac-dwmac fe300000.ethernet: init for RGMII_ID
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614319] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614335] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614342] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614347] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614351] rk_gmac-dwmac fe300000.ethernet: COE Type 2
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614356] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614361] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614439] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614445] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614450] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614459] rk_gmac-dwmac fe300000.ethernet: device MAC address 82:d8:43:34:63:dd
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.614778] libphy: stmmac: probed
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.642829] Bluetooth: hci0: BCM: chip id 101
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.643077] Bluetooth: hci0: BCM: features 0x2f
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.644083] Bluetooth: hci0: BCM4354A2
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.644093] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.734650] ov4689 1-0036: driver version: 00.01.01
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.734663] ov4689 1-0036: could not get module information!
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.737212] ov4689 1-0036: Detected OV004688 sensor
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.740906] Bluetooth: hci0: BCM4356A2 'brcm/BCM4356A2.hcd' Patch
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.754795] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.763655] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.947825] panfrost ff9a0000.gpu: clock rate = 500000000
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.948563] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.948573] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.948578] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.948583] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.949312] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.973498] rockchip-vop ff8f0000.vop: Adding to iommu group 2
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.974519] rockchip-vop ff900000.vop: Adding to iommu group 3
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.977794] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.977864] [drm] unsupported AFBC format[3231564e]
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.979203] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.979423] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.979879] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.980070] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
Feb 1 21:35:14 nanopi-m4 kernel: [ 9.980338] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.054232] rockchip-rga ff680000.rga: HW Version: 0x03.02
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.054562] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.063674] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.065188] rkvdec ff660000.video-codec: Adding to iommu group 1
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.108145] rkisp1 ff910000.isp0: Adding to iommu group 4
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.108645] rkisp1: registered rkisp1_mainpath as /dev/video2
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.108704] rkisp1: registered rkisp1_selfpath as /dev/video3
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.242367] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.245580] hantro-vpu ff650000.video-codec: Adding to iommu group 0
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.246127] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video6
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.246263] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video7
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.270427] asoc-simple-card rt5651-sound: ASoC: no DMI vendor name!
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.273958] asoc-simple-card spdif-sound: ASoC: no DMI vendor name!
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.311998] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.367030] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.367113] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.380356] random: crng init done
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.380373] random: 7 urandom warning(s) missed due to ratelimiting
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.404967] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.455815] Bluetooth: hci0: BCM4356 37.4MHz AMPAK AP6356-0055
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.455836] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.462984] Console: switching to colour frame buffer device 240x67
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.499438] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.554453] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.559041] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d
Feb 1 21:35:14 nanopi-m4 kernel: [ 10.576061] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.139275] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=94)
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.150250] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.150278] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.150620] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii-id link mode
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.810703] zram0: detected capacity change from 339112 to 0
Feb 1 21:35:14 nanopi-m4 kernel: [ 11.886363] Adding 169552k swap on /dev/zram0. Priority:5 extents:1 across:169552k SS
Feb 1 21:35:14 nanopi-m4 kernel: [ 12.178514] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Feb 1 21:35:14 nanopi-m4 kernel: [ 12.178524] Bluetooth: BNEP filters: protocol multicast
Feb 1 21:35:14 nanopi-m4 kernel: [ 12.178534] Bluetooth: BNEP socket layer initialized
Feb 1 21:35:14 nanopi-m4 kernel: [ 12.213284] NET: Registered protocol family 38
Feb 1 21:35:34 nanopi-m4 kernel: [ 31.714452] vcca0v9_s3: disabling
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.682505] usb 7-1.4: new low-speed USB device number 3 using xhci-hcd
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.841399] usb 7-1.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.841448] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.841471] usb 7-1.4: Product: USB Keyboard
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.841491] usb 7-1.4: Manufacturer: SIGMACHIP
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.918883] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.0/0003:1C4F:0002.0001/input/input1
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.979473] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4/input0
Feb 1 21:37:05 nanopi-m4 kernel: [ 122.983317] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.1/0003:1C4F:0002.0002/input/input2
Feb 1 21:37:05 nanopi-m4 kernel: [ 123.043335] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.1/0003:1C4F:0002.0002/input/input3
Feb 1 21:37:05 nanopi-m4 kernel: [ 123.044102] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4/input1
Feb 1 21:37:19 nanopi-m4 kernel: [ 137.490511] usb 7-1.2: new low-speed USB device number 4 using xhci-hcd
Feb 1 21:37:19 nanopi-m4 kernel: [ 137.642772] usb 7-1.2: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
Feb 1 21:37:19 nanopi-m4 kernel: [ 137.642822] usb 7-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Feb 1 21:37:19 nanopi-m4 kernel: [ 137.642845] usb 7-1.2: Product: USB OPTICAL MOUSE
Feb 1 21:37:20 nanopi-m4 kernel: [ 137.702134] input: USB OPTICAL MOUSE as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.2/7-1.2:1.0/0003:275D:0BA6.0003/input/input4
Feb 1 21:37:20 nanopi-m4 kernel: [ 137.703205] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-xhci-hcd.1.auto-1.2/input0
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.613208] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported!
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.613972] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.615187] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported!
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.615940] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.617903] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported!
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.618693] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.619981] hdmi-audio-codec hdmi-audio-codec.5.auto: Only one simultaneous stream supported!
Feb 1 21:37:24 nanopi-m4 kernel: [ 142.620734] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: error at snd_soc_dai_startup on i2s-hifi: -22
Feb 1 21:37:35 nanopi-m4 kernel: [ 152.869632] rfkill: input handler disabled
Feb 1 21:38:36 nanopi-m4 kernel: [ 214.526973] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Raw
Kernel 5.11.0-rc6 (dual-camera)
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.11.0-rc6 (alex@svn) (aarch64-linux-gnu-gcc (Linaro GCC 7.5-2019.12-rc1) 7.5.0, GNU ld (Linaro_Binutils-2019.12-rc1) 2.28.2.20170706) #3 SMP PREEMPT Mon Feb 1 20:14:43 -03 2021
[ 0.000000] Machine model: FriendlyElec NanoPi M4
[ 0.000000] efi: UEFI not found.
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fba0100-0x7fba1fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 523776
[ 0.000000] DMA zone: 8184 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 523776 pages, LIFO batch:63
[ 0.000000] cma: Reserved 128 MiB at 0x0000000071c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s55320 r8192 d30696 u94208
[ 0.000000] pcpu-alloc: s55320 r8192 d30696 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 515592
[ 0.000000] Policy zone: DMA
[ 0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 1900136K/2095104K available (12608K kernel code, 1676K rwdata, 4640K rodata, 2304K init, 498K bss, 63896K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 256 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: 16 PPIs implemented
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @480000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000000440000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000000450000
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] random: get_random_bytes called from start_kernel+0x618/0x7e4 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001826] Console: colour dummy device 80x25
[ 0.003143] printk: console [tty0] enabled
[ 0.003323] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.003443] pid_max: default: 32768 minimum: 301
[ 0.003675] LSM: Security Framework initializing
[ 0.003837] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.003908] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.007550] rcu: Hierarchical SRCU implementation.
[ 0.008114] Platform MSI: interrupt-controller@fee20000 domain created
[ 0.008775] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.012109] EFI services will not be available.
[ 0.012756] smp: Bringing up secondary CPUs ...
[ 0.013749] Detected VIPT I-cache on CPU1
[ 0.013810] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.013841] GICv3: CPU1: using allocated LPI pending table @0x0000000000460000
[ 0.013923] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.015044] Detected VIPT I-cache on CPU2
[ 0.015096] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.015122] GICv3: CPU2: using allocated LPI pending table @0x0000000000470000
[ 0.015182] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.016319] Detected VIPT I-cache on CPU3
[ 0.016370] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.016396] GICv3: CPU3: using allocated LPI pending table @0x0000000000500000
[ 0.016455] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.020095] CPU features: detected: Spectre-v3a
[ 0.020783] CPU features: detected: Spectre-v2
[ 0.021086] CPU features: detected: Spectre-v4
[ 0.021353] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.021712] Detected PIPT I-cache on CPU4
[ 0.022986] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.023744] GICv3: CPU4: using allocated LPI pending table @0x0000000000510000
[ 0.025361] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[ 0.034671] Detected PIPT I-cache on CPU5
[ 0.036108] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.036819] GICv3: CPU5: using allocated LPI pending table @0x0000000000520000
[ 0.038247] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[ 0.043765] smp: Brought up 1 node, 6 CPUs
[ 0.044557] SMP: Total of 6 processors activated.
[ 0.044600] CPU features: detected: 32-bit EL0 Support
[ 0.044647] CPU features: detected: CRC32 instructions
[ 0.044690] CPU features: detected: 32-bit EL1 Support
[ 0.238211] CPU: All CPU(s) started at EL2
[ 0.239511] alternatives: patching kernel code
[ 0.244955] devtmpfs: initialized
[ 0.275124] KASLR disabled due to lack of seed
[ 0.275898] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.275996] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.286212] pinctrl core: initialized pinctrl subsystem
[ 0.287941] DMI not present or invalid.
[ 0.289978] NET: Registered protocol family 16
[ 0.299854] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.307048] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.307729] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.307958] audit: initializing netlink subsys (disabled)
[ 0.308579] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1
[ 0.311282] thermal_sys: Registered thermal governor 'step_wise'
[ 0.312407] cpuidle: using governor menu
[ 0.313274] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.315574] ASID allocator initialised with 65536 entries
[ 0.319125] Serial: AMBA PL011 UART driver
[ 0.428120] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.428414] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.428457] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.428499] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.438324] cryptd: max_cpu_qlen set to 1000
[ 0.454559] ACPI: Interpreter disabled.
[ 0.461664] vcc5v0_sys: supplied by vdd_5v
[ 0.462053] vbus_typec: supplied by vdd_5v
[ 0.462198] vcc5v0_core: supplied by vdd_5v
[ 0.462886] vcc3v3_sys: supplied by vcc5v0_core
[ 0.463029] vcc3v0_sd: supplied by vcc3v3_sys
[ 0.463185] vcc5v0_usb1: supplied by vcc5v0_sys
[ 0.463928] vcc5v0_usb2: supplied by vcc5v0_sys
[ 0.468159] iommu: Default domain type: Translated
[ 0.474375] vgaarb: loaded
[ 0.475388] SCSI subsystem initialized
[ 0.476839] libata version 3.00 loaded.
[ 0.477352] usbcore: registered new interface driver usbfs
[ 0.477473] usbcore: registered new interface driver hub
[ 0.477576] usbcore: registered new device driver usb
[ 0.478755] pps_core: LinuxPPS API ver. 1 registered
[ 0.478797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.478870] PTP clock support registered
[ 0.479376] EDAC MC: Ver: 3.0.0
[ 0.481918] FPGA manager framework
[ 0.482195] Advanced Linux Sound Architecture Driver Initialized.
[ 0.483707] Bluetooth: Core ver 2.22
[ 0.483829] NET: Registered protocol family 31
[ 0.483866] Bluetooth: HCI device and connection manager initialized
[ 0.483916] Bluetooth: HCI socket layer initialized
[ 0.483956] Bluetooth: L2CAP socket layer initialized
[ 0.484020] Bluetooth: SCO socket layer initialized
[ 0.486955] clocksource: Switched to clocksource arch_sys_counter
[ 0.487598] VFS: Disk quotas dquot_6.6.0
[ 0.487759] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.488297] pnp: PnP ACPI: disabled
[ 0.504653] NET: Registered protocol family 2
[ 0.506085] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.506257] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.506746] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 0.507363] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.508630] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.508811] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.509289] NET: Registered protocol family 1
[ 0.511048] RPC: Registered named UNIX socket transport module.
[ 0.511107] RPC: Registered udp transport module.
[ 0.511140] RPC: Registered tcp transport module.
[ 0.511171] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.511218] PCI: CLS 0 bytes, default 64
[ 0.511707] Unpacking initramfs...
[ 0.631883] Freeing initrd memory: 1128K
[ 0.645669] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.649124] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.651230] kvm [1]: IPA Size Limit: 40 bits
[ 0.654018] kvm [1]: vgic-v2@fff20000
[ 0.654260] kvm [1]: GIC system register CPU interface enabled
[ 0.657166] kvm [1]: vgic interrupt IRQ18
[ 0.659912] kvm [1]: Hyp mode initialized successfully
[ 0.675699] Initialise system trusted keyrings
[ 0.676080] Key type blacklist registered
[ 0.676717] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 0.693822] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.696504] NFS: Registering the id_resolver key type
[ 0.696623] Key type id_resolver registered
[ 0.696657] Key type id_legacy registered
[ 0.696905] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.809108] Key type asymmetric registered
[ 0.809223] Asymmetric key parser 'x509' registered
[ 0.809356] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.809409] io scheduler mq-deadline registered
[ 0.809443] io scheduler kyber registered
[ 0.846309] EINJ: ACPI disabled.
[ 0.852077] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.852312] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.855480] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.855565] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.930339] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.944582] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 47, base_baud = 1500000) is a 16550A
[ 0.945215] serial serial0: tty port ttyS0 registered
[ 0.949527] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 48, base_baud = 1500000) is a 16550A
[ 1.051182] printk: console [ttyS2] enabled
[ 1.059894] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 1.095942] loop: module loaded
[ 1.100138] zram: Added device: zram0
[ 1.110076] libphy: Fixed MDIO Bus: probed
[ 1.111766] tun: Universal TUN/TAP device driver, 1.6
[ 1.118328] thunder_xcv, ver 1.0
[ 1.118966] thunder_bgx, ver 1.0
[ 1.119367] nicpf, ver 1.0
[ 1.121415] hclge is initializing
[ 1.121777] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 1.122450] hns3: Copyright (c) 2017 Huawei Corporation.
[ 1.123283] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.123750] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.124387] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.124892] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.125477] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.126059] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.127110] sky2: driver version 1.30
[ 1.131067] VFIO - User Level meta-driver version: 0.3
[ 1.141983] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[ 1.159794] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.160663] ehci-pci: EHCI PCI platform driver
[ 1.161172] ehci-platform: EHCI generic platform driver
[ 1.164655] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.165257] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.166444] ehci-platform fe380000.usb: irq 39, io mem 0xfe380000
[ 1.182648] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.183650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.184435] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.185114] usb usb1: Product: EHCI Host Controller
[ 1.185577] usb usb1: Manufacturer: Linux 5.11.0-rc6 ehci_hcd
[ 1.186118] usb usb1: SerialNumber: fe380000.usb
[ 1.190955] hub 1-0:1.0: USB hub found
[ 1.191399] hub 1-0:1.0: 1 port detected
[ 1.195409] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.195977] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 1.196979] ehci-platform fe3c0000.usb: irq 41, io mem 0xfe3c0000
[ 1.210589] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.211484] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.212264] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.212944] usb usb2: Product: EHCI Host Controller
[ 1.213409] usb usb2: Manufacturer: Linux 5.11.0-rc6 ehci_hcd
[ 1.213949] usb usb2: SerialNumber: fe3c0000.usb
[ 1.218662] hub 2-0:1.0: USB hub found
[ 1.219084] hub 2-0:1.0: 1 port detected
[ 1.221028] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.222014] ohci-pci: OHCI PCI platform driver
[ 1.222728] ohci-platform: OHCI generic platform driver
[ 1.223907] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.224573] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 1.225746] ohci-platform fe3a0000.usb: irq 40, io mem 0xfe3a0000
[ 1.286963] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 1.287744] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.288423] usb usb3: Product: Generic Platform OHCI controller
[ 1.288979] usb usb3: Manufacturer: Linux 5.11.0-rc6 ohci_hcd
[ 1.289520] usb usb3: SerialNumber: fe3a0000.usb
[ 1.293689] hub 3-0:1.0: USB hub found
[ 1.294108] hub 3-0:1.0: 1 port detected
[ 1.296108] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.296763] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 1.297896] ohci-platform fe3e0000.usb: irq 42, io mem 0xfe3e0000
[ 1.359114] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.11
[ 1.359899] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.360578] usb usb4: Product: Generic Platform OHCI controller
[ 1.361133] usb usb4: Manufacturer: Linux 5.11.0-rc6 ohci_hcd
[ 1.361673] usb usb4: SerialNumber: fe3e0000.usb
[ 1.366094] hub 4-0:1.0: USB hub found
[ 1.366520] hub 4-0:1.0: 1 port detected
[ 1.370963] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.371591] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[ 1.372585] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.373536] xhci-hcd xhci-hcd.0.auto: irq 80, io mem 0xfe800000
[ 1.375597] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.376379] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.377060] usb usb5: Product: xHCI Host Controller
[ 1.377525] usb usb5: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
[ 1.378066] usb usb5: SerialNumber: xhci-hcd.0.auto
[ 1.382395] hub 5-0:1.0: USB hub found
[ 1.383024] hub 5-0:1.0: 1 port detected
[ 1.384212] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 1.384756] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[ 1.385491] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.386256] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.387333] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.388113] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.388793] usb usb6: Product: xHCI Host Controller
[ 1.389256] usb usb6: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
[ 1.389797] usb usb6: SerialNumber: xhci-hcd.0.auto
[ 1.394336] hub 6-0:1.0: USB hub found
[ 1.394860] hub 6-0:1.0: 1 port detected
[ 1.396332] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.396886] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[ 1.397942] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[ 1.399350] xhci-hcd xhci-hcd.1.auto: irq 81, io mem 0xfe900000
[ 1.400926] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
[ 1.401707] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.402387] usb usb7: Product: xHCI Host Controller
[ 1.402922] usb usb7: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
[ 1.403467] usb usb7: SerialNumber: xhci-hcd.1.auto
[ 1.406750] hub 7-0:1.0: USB hub found
[ 1.407185] hub 7-0:1.0: 1 port detected
[ 1.408409] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.408952] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[ 1.409685] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.410461] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.411548] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
[ 1.412329] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.413008] usb usb8: Product: xHCI Host Controller
[ 1.413471] usb usb8: Manufacturer: Linux 5.11.0-rc6 xhci-hcd
[ 1.414010] usb usb8: SerialNumber: xhci-hcd.1.auto
[ 1.415619] hub 8-0:1.0: USB hub found
[ 1.416049] hub 8-0:1.0: 1 port detected
[ 1.417670] usbcore: registered new interface driver usb-storage
[ 1.426194] i2c /dev entries driver
[ 1.443533] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.445987] vdd_cpu_b: supplied by vcc3v3_sys
[ 1.449303] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.451505] vdd_gpu: supplied by vcc3v3_sys
[ 1.456096] rk808 0-001b: chip id: 0x0
[ 1.464664] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.465415] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.467549] vdd_center: supplied by vcc3v3_sys
[ 1.468850] vdd_cpu_l: supplied by vcc3v3_sys
[ 1.469748] vcc_ddr: supplied by vcc3v3_sys
[ 1.471165] vcc_1v8: supplied by vcc3v3_sys
[ 1.473119] vcc1v8_cam: supplied by vcc3v3_sys
[ 1.474942] vcc3v0_touch: supplied by vcc3v3_sys
[ 1.476817] vcc1v8_pmupll: supplied by vcc3v3_sys
[ 1.478792] vcc_sdio: supplied by vcc3v3_sys
[ 1.480412] vcca3v0_codec: supplied by vcc3v3_sys
[ 1.482251] vcc_1v5: supplied by vcc3v3_sys
[ 1.483976] vcca1v8_codec: supplied by vcc3v3_sys
[ 1.485803] vcc_3v0: supplied by vcc3v3_sys
[ 1.486797] vcc3v3_s3: supplied by vcc3v3_sys
[ 1.487726] vcc3v3_s0: supplied by vcc3v3_sys
[ 1.498834] dw_wdt ff848000.watchdog: No valid TOPs array specified
[ 1.508830] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 400000 KHz, changing to: 408000 KHz
[ 1.513381] cpufreq: cpufreq_online: CPU4: Running at unlisted initial frequency: 12000 KHz, changing to: 408000 KHz
[ 1.517314] sdhci: Secure Digital Host Controller Interface driver
[ 1.517874] sdhci: Copyright(c) Pierre Ossman
[ 1.518410] Synopsys Designware Multimedia Card Interface Driver
[ 1.519498] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.519711] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[ 1.520042] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[ 1.520626] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[ 1.520976] mmc2: CQHCI version 5.10
[ 1.521258] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[ 1.521825] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[ 1.522170] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[ 1.522762] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 36,32 bit host data width,256 deep fifo
[ 1.522786] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.523029] hid: raw HID events driver (C) Jiri Kosina
[ 1.523230] usbcore: registered new interface driver usbhid
[ 1.523233] usbhid: USB HID core driver
[ 1.523265] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 37,32 bit host data width,256 deep fifo
[ 1.523904] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[ 1.524824] NET: Registered protocol family 17
[ 1.524937] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[ 1.525095] mmc_host mmc0: card is non-removable.
[ 1.525749] Bluetooth: RFCOMM TTY layer initialized
[ 1.529424] Bluetooth: RFCOMM socket layer initialized
[ 1.529885] Bluetooth: RFCOMM ver 1.11
[ 1.530219] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.530750] Bluetooth: HIDP socket layer initialized
[ 1.531215] Key type dns_resolver registered
[ 1.532007] registered taskstats version 1
[ 1.532376] Loading compiled-in X.509 certificates
[ 1.537947] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.539065] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.546756] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.546870] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.548956] ALSA device list:
[ 1.549231] No soundcards found.
[ 1.549648] dw-apb-uart ff1a0000.serial: forbid DMA for kernel console
[ 1.549651] random: fast init done
[ 1.553456] Freeing unused kernel memory: 2304K
[ 1.570768] Run /init as init process
[ 1.571104] with arguments:
[ 1.571106] /init
[ 1.571108] earlyprintk
[ 1.571111] with environment:
[ 1.571113] HOME=/
[ 1.571114] TERM=linux
[ 1.587399] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.589466] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.591564] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.594812] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.630457] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.652652] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[ 1.746657] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[ 1.898896] usb 7-1: New USB device found, idVendor=2109, idProduct=2817, bcdDevice= 0.50
[ 1.899625] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.900251] usb 7-1: Product: USB2.0 Hub
[ 1.900695] usb 7-1: Manufacturer: VIA Labs, Inc.
[ 1.909979] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 205
[ 1.910637] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.911850] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[ 1.914366] mmcblk1: p1 p2
[ 1.921836] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 191
[ 1.930113] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[ 1.954952] hub 7-1:1.0: USB hub found
[ 1.955597] hub 7-1:1.0: 4 ports detected
[ 2.049853] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[ 2.143844] usb 8-1: New USB device found, idVendor=2109, idProduct=0817, bcdDevice= 0.50
[ 2.144574] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.145199] usb 8-1: Product: USB3.0 Hub
[ 2.145643] usb 8-1: Manufacturer: VIA Labs, Inc.
[ 2.179149] hub 8-1:1.0: USB hub found
[ 2.179883] hub 8-1:1.0: 4 ports detected
[ 2.730656] usb 7-1.2: new low-speed USB device number 3 using xhci-hcd
[ 2.886969] usb 7-1.2: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 2.887713] usb 7-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.888354] usb 7-1.2: Product: USB OPTICAL MOUSE
[ 2.949686] input: USB OPTICAL MOUSE as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.2/7-1.2:1.0/0003:275D:0BA6.0001/input/input1
[ 2.951831] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-xhci-hcd.1.auto-1.2/input0
[ 3.082655] usb 7-1.4: new low-speed USB device number 4 using xhci-hcd
[ 3.241702] usb 7-1.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[ 3.242447] usb 7-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.243106] usb 7-1.4: Product: USB Keyboard
[ 3.243482] usb 7-1.4: Manufacturer: SIGMACHIP
[ 3.334234] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.0/0003:1C4F:0002.0002/input/input2
[ 3.395656] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4/input0
[ 3.399732] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.1/0003:1C4F:0002.0003/input/input3
[ 3.459178] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.usb/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4:1.1/0003:1C4F:0002.0003/input/input4
[ 3.461435] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4/input1
[ 6.699105] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null). Quota mode: none.
[ 7.021174] systemd[1]: System time before build time, advancing clock.
[ 7.345190] NET: Registered protocol family 10
[ 7.346444] Segment Routing with IPv6
[ 7.393914] systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 7.396645] systemd[1]: Detected architecture arm64.
[ 7.449689] systemd[1]: Set hostname to <nanopi-m4>.
[ 7.751350] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 7.930773] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.931593] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 7.932711] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 7.935608] systemd[1]: Created slice system-modprobe.slice.
[ 7.937147] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.938644] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 7.950929] random: systemd: uninitialized urandom read (16 bytes read)
[ 7.952540] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 7.964029] systemd[1]: Created slice User and Session Slice.
[ 7.975223] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 7.987066] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[ 7.988341] systemd[1]: Reached target User and Group Name Lookups.
[ 7.999006] systemd[1]: Reached target Remote File Systems.
[ 8.000374] systemd[1]: Reached target Slices.
[ 8.011017] systemd[1]: Reached target Swap.
[ 8.028581] systemd[1]: Listening on Syslog Socket.
[ 8.039442] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.051208] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.063708] systemd[1]: Listening on Journal Audit Socket.
[ 8.065435] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.079463] systemd[1]: Listening on Journal Socket.
[ 8.091554] systemd[1]: Listening on udev Control Socket.
[ 8.093194] systemd[1]: Listening on udev Kernel Socket.
[ 8.106044] systemd[1]: Mounting Huge Pages File System...
[ 8.121857] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.127146] systemd[1]: Mounting Kernel Debug File System...
[ 8.139063] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
[ 8.143775] systemd[1]: Starting Journal Service...
[ 8.158123] systemd[1]: Starting Set the console keyboard layout...
[ 8.163531] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.178098] systemd[1]: Starting Load Kernel Module drm...
[ 8.211447] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.212418] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.279242] systemd[1]: Starting Load Kernel Modules...
[ 8.294131] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.298942] systemd[1]: Starting udev Coldplug all Devices...
[ 8.315372] systemd[1]: Started Journal Service.
[ 8.393918] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none.
[ 8.519060] systemd-journald[265]: Received client request to flush runtime journal.
[ 9.065903] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
[ 9.065940] OF: /pcie@f8000000: Missing device_type
[ 9.065956] rockchip-pcie f8000000.pcie: MEM 0x00fa000000..0x00fbdfffff -> 0x00fa000000
[ 9.065969] rockchip-pcie f8000000.pcie: IO 0x00fbe00000..0x00fbefffff -> 0x00fbe00000
[ 9.068689] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[ 9.068729] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 9.068758] vcc1v8_s3: supplied by vcc_1v8
[ 9.068839] vcca1v8_s3: supplied by vcc1v8_s3
[ 9.069163] vcca0v9_s3: supplied by vcc1v8_s3
[ 9.240799] mc: Linux media interface: v0.10
[ 9.412444] rk808-rtc rk808-rtc: registered as rtc0
[ 9.413264] rk808-rtc rk808-rtc: setting system clock to 2013-01-18T08:50:18 UTC (1358499018)
[ 9.418413] rt5651 1-001a: Failed to reguest IRQ 0: -22
[ 9.517099] Bluetooth: HCI UART driver ver 2.3
[ 9.517111] Bluetooth: HCI UART protocol H4 registered
[ 9.517154] Bluetooth: HCI UART protocol LL registered
[ 9.517307] Bluetooth: HCI UART protocol Broadcom registered
[ 9.569426] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 9.570576] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 9.638196] dw-apb-uart ff180000.serial: failed to request DMA
[ 9.653062] videodev: Linux video capture interface: v2.00
[ 9.769644] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 9.769654] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 9.769730] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 9.769857] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 9.769863] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 9.769867] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 9.769874] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 9.769897] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 9.770567] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 9.775578] rk_gmac-dwmac fe300000.ethernet: init for RGMII_ID
[ 9.775813] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 9.775819] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 9.775823] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 9.775826] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 9.775829] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 9.775832] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 9.775835] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 9.775876] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 9.775879] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 9.775882] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 9.775888] rk_gmac-dwmac fe300000.ethernet: device MAC address f6:de:cd:35:65:0f
[ 9.776062] libphy: stmmac: probed
[ 9.812773] ov4689 1-0036: driver version: 00.01.01
[ 9.812786] ov4689 1-0036: could not get module information!
[ 9.815351] ov4689 1-0036: Detected OV004688 sensor
[ 9.815982] ov4689 2-0036: driver version: 00.01.01
[ 9.815999] ov4689 2-0036: could not get module information!
[ 9.816042] ov4689 2-0036: Failed to get reset-gpios
[ 9.816055] ov4689 2-0036: Failed to get pwdn-gpios
[ 9.818417] ov4689 2-0036: Unexpected sensor id(000000), ret(-5)
[ 9.895303] Bluetooth: hci0: BCM: chip id 101
[ 9.895633] Bluetooth: hci0: BCM: features 0x2f
[ 9.896686] Bluetooth: hci0: BCM4354A2
[ 9.896691] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[ 9.952153] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.961935] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.973433] Bluetooth: hci0: BCM4356A2 'brcm/BCM4356A2.hcd' Patch
[ 10.103857] rockchip-vop ff8f0000.vop: Adding to iommu group 2
[ 10.105470] rockchip-vop ff900000.vop: Adding to iommu group 3
[ 10.176264] rockchip-rga ff680000.rga: HW Version: 0x03.02
[ 10.176587] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
[ 10.211865] rockchip_vdec: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.213469] rkvdec ff660000.video-codec: Adding to iommu group 1
[ 10.274028] rkisp1 ff910000.isp0: Adding to iommu group 4
[ 10.274818] rkisp1: registered rkisp1_mainpath as /dev/video2
[ 10.274948] rkisp1: registered rkisp1_selfpath as /dev/video3
[ 10.275970] rkisp1 ff920000.isp1: Adding to iommu group 5
[ 10.276515] rkisp1: registered rkisp1_mainpath as /dev/video6
[ 10.276595] rkisp1: registered rkisp1_selfpath as /dev/video7
[ 10.276773] debugfs: Directory 'rkisp1' with parent '/' already present!
[ 10.441271] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.444655] hantro-vpu ff650000.video-codec: Adding to iommu group 0
[ 10.445301] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video10
[ 10.445459] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video11
[ 10.488044] asoc-simple-card rt5651-sound: ASoC: no DMI vendor name!
[ 10.490001] asoc-simple-card spdif-sound: ASoC: no DMI vendor name!
[ 10.493562] panfrost ff9a0000.gpu: clock rate = 500000000
[ 10.494361] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[ 10.494371] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[ 10.494377] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 10.494384] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[ 10.496809] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[ 10.511263] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 10.585633] random: crng init done
[ 10.585652] random: 7 urandom warning(s) missed due to ratelimiting
[ 10.603789] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[ 10.605501] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[ 10.605543] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 10.684259] Bluetooth: hci0: BCM4356 37.4MHz AMPAK AP6356-0055
[ 10.684285] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[ 10.852314] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[ 10.856928] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d
[ 11.303651] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=95)
[ 11.318160] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 11.318188] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 11.318549] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 11.828666] zram0: detected capacity change from 339112 to 0
[ 11.922650] Adding 169552k swap on /dev/zram0. Priority:5 extents:1 across:169552k SS
[ 12.190317] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.190329] Bluetooth: BNEP filters: protocol multicast
[ 12.190341] Bluetooth: BNEP socket layer initialized
[ 12.231705] NET: Registered protocol family 38
[ 17.448788] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 31.638860] vcca0v9_s3: disabling
ubuntu@nanopi-m4:~$
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment