Skip to content

Instantly share code, notes, and snippets.

@avafinger
Created May 24, 2019 01:16
Show Gist options
  • Save avafinger/a6b43c140b52e7d48419294d88e8d311 to your computer and use it in GitHub Desktop.
Save avafinger/a6b43c140b52e7d48419294d88e8d311 to your computer and use it in GitHub Desktop.
Orange Pi H6 Mainline Kernel 5.2.0-rc1 boot log
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.2.0-rc1 (alex@svn) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #1 SMP PREEMPT Thu May 23 20:55:08 -03 2019
[ 0.000000] Machine model: Opi H6
[ 0.000000] cma: Reserved 128 MiB at 0x0000000078000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x77dd9840-0x77ddafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 0 pages reserved
[ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 22 pages/cpu s52696 r8192 d29224 u90112
[ 0.000000] pcpu-alloc: s52696 r8192 d29224 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 12288 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log_buf_len: 32768 bytes
[ 0.000000] printk: early log buf free: 14084(85%)
[ 0.000000] Memory: 884852K/1048576K available (8446K kernel code, 634K rwdata, 2480K rodata, 512K init, 228K bss, 32652K reserved, 131072K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] random: get_random_bytes called from start_kernel+0x2b0/0x458 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000222] Console: colour dummy device 80x25
[ 0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000304] pid_max: default: 32768 minimum: 301
[ 0.000383] LSM: Security Framework initializing
[ 0.000886] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001135] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.001166] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001180] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001639] *** VALIDATE proc ***
[ 0.001825] *** VALIDATE cgroup1 ***
[ 0.001832] *** VALIDATE cgroup2 ***
[ 0.024036] ASID allocator initialised with 32768 entries
[ 0.032028] rcu: Hierarchical SRCU implementation.
[ 0.048066] smp: Bringing up secondary CPUs ...
[ 0.080514] Detected VIPT I-cache on CPU1
[ 0.080567] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.112466] Detected VIPT I-cache on CPU2
[ 0.112498] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.144524] Detected VIPT I-cache on CPU3
[ 0.144553] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.144648] smp: Brought up 1 node, 4 CPUs
[ 0.144653] SMP: Total of 4 processors activated.
[ 0.144658] CPU features: detected: 32-bit EL0 Support
[ 0.144664] CPU features: detected: CRC32 instructions
[ 0.144982] CPU: All CPU(s) started at EL2
[ 0.145002] alternatives: patching kernel code
[ 0.146225] devtmpfs: initialized
[ 0.151747] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.151802] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.156046] pinctrl core: initialized pinctrl subsystem
[ 0.157250] NET: Registered protocol family 16
[ 0.157668] audit: initializing netlink subsys (disabled)
[ 0.157780] audit: type=2000 audit(0.156:1): state=initialized audit_enabled=0 res=1
[ 0.158740] cpuidle: using governor menu
[ 0.159029] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.161675] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.162365] Serial: AMBA PL011 UART driver
[ 0.181482] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.181491] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.181496] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.181502] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.183637] cryptd: max_cpu_qlen set to 1000
[ 0.190460] SCSI subsystem initialized
[ 0.190664] libata version 3.00 loaded.
[ 0.191025] usbcore: registered new interface driver usbfs
[ 0.191077] usbcore: registered new interface driver hub
[ 0.191159] usbcore: registered new device driver usb
[ 0.191672] pps_core: LinuxPPS API ver. 1 registered
[ 0.191678] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.191701] PTP clock support registered
[ 0.191879] EDAC MC: Ver: 3.0.0
[ 0.192810] Advanced Linux Sound Architecture Driver Initialized.
[ 0.193776] clocksource: Switched to clocksource arch_sys_counter
[ 0.193980] VFS: Disk quotas dquot_6.6.0
[ 0.194040] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.194092] *** VALIDATE hugetlbfs ***
[ 0.202642] NET: Registered protocol family 2
[ 0.203072] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
[ 0.203120] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.203221] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.203358] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.203467] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.203503] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.203648] NET: Registered protocol family 1
[ 0.204067] RPC: Registered named UNIX socket transport module.
[ 0.204071] RPC: Registered udp transport module.
[ 0.204074] RPC: Registered tcp transport module.
[ 0.204078] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.204257] Trying to unpack rootfs image as initramfs...
[ 0.252912] Freeing initrd memory: 1076K
[ 0.260331] Initialise system trusted keyrings
[ 0.260480] workingset: timestamp_bits=44 max_order=18 bucket_order=0
[ 0.268593] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.269417] NFS: Registering the id_resolver key type
[ 0.269441] Key type id_resolver registered
[ 0.269445] Key type id_legacy registered
[ 0.269457] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.269641] 9p: Installing v9fs 9p2000 file system support
[ 0.270032] NET: Registered protocol family 38
[ 0.270043] Key type asymmetric registered
[ 0.270048] Asymmetric key parser 'x509' registered
[ 0.270093] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.270246] io scheduler mq-deadline registered
[ 0.270251] io scheduler kyber registered
[ 0.270658] sun50i-de2-bus 1000000.display-engine: Error couldn't map SRAM to device
[ 0.271549] sun4i-usb-phy 5100400.phy: Couldn't get regulator usb0_vbus... Deferring probe
[ 0.276371] sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
[ 0.291886] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.294275] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.299198] loop: module loaded
[ 0.301684] libphy: Fixed MDIO Bus: probed
[ 0.302003] tun: Universal TUN/TAP device driver, 1.6
[ 0.302584] PPP generic driver version 2.4.2
[ 0.302912] VFIO - User Level meta-driver version: 0.3
[ 0.303936] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.303942] ehci-platform: EHCI generic platform driver
[ 0.304192] ehci-platform 5101000.usb: EHCI Host Controller
[ 0.304214] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 1
[ 0.305095] ehci-platform 5101000.usb: irq 22, io mem 0x05101000
[ 0.317919] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
[ 0.318114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 0.318122] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.318128] usb usb1: Product: EHCI Host Controller
[ 0.318135] usb usb1: Manufacturer: Linux 5.2.0-rc1 ehci_hcd
[ 0.318141] usb usb1: SerialNumber: 5101000.usb
[ 0.318714] hub 1-0:1.0: USB hub found
[ 0.318755] hub 1-0:1.0: 1 port detected
[ 0.319435] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.319461] ohci-platform: OHCI generic platform driver
[ 0.319682] ohci-platform 5101400.usb: Generic Platform OHCI controller
[ 0.319701] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 2
[ 0.319974] ohci-platform 5101400.usb: irq 23, io mem 0x05101400
[ 0.382027] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 0.382036] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.382042] usb usb2: Product: Generic Platform OHCI controller
[ 0.382049] usb usb2: Manufacturer: Linux 5.2.0-rc1 ohci_hcd
[ 0.382055] usb usb2: SerialNumber: 5101400.usb
[ 0.382565] hub 2-0:1.0: USB hub found
[ 0.382597] hub 2-0:1.0: 1 port detected
[ 0.383670] usbcore: registered new interface driver usb-storage
[ 0.385601] mousedev: PS/2 mouse device common for all mice
[ 0.386483] sun6i-rtc 7000000.rtc: registered as rtc0
[ 0.386492] sun6i-rtc 7000000.rtc: RTC enabled
[ 0.386604] i2c /dev entries driver
[ 0.386880] sun50i-h6-r-pinctrl 7022000.pinctrl: 7022000.pinctrl supply vcc-pl not found, using dummy regulator
[ 0.387585] axp20x-i2c 2-0036: AXP20x variant AXP806 found
[ 0.392091] dcdca: supplied by regulator-dummy
[ 0.393230] dcdcc: supplied by regulator-dummy
[ 0.393941] dcdcd: supplied by regulator-dummy
[ 0.394407] vdd-sys: Bringing 900000uV into 960000-960000uV
[ 0.394969] dcdce: supplied by regulator-dummy
[ 0.395623] aldo1: supplied by regulator-dummy
[ 0.396292] aldo2: supplied by regulator-dummy
[ 0.396758] vcc-ac200: Bringing 700000uV into 3300000-3300000uV
[ 0.397295] aldo3: supplied by regulator-dummy
[ 0.397784] vcc-3v3-1: Bringing 700000uV into 3300000-3300000uV
[ 0.398610] bldo1: supplied by regulator-dummy
[ 0.399693] bldo2: supplied by regulator-dummy
[ 0.400398] bldo3: supplied by regulator-dummy
[ 0.400865] vcc-dcxoio: Bringing 700000uV into 1800000-1800000uV
[ 0.401689] bldo4: supplied by regulator-dummy
[ 0.402394] cldo1: supplied by regulator-dummy
[ 0.403089] cldo2: supplied by regulator-dummy
[ 0.403561] vcc-wifi-1: Bringing 700000uV into 3300000-3300000uV
[ 0.404104] cldo3: supplied by regulator-dummy
[ 0.404571] vcc-wifi-2: Bringing 700000uV into 3300000-3300000uV
[ 0.405106] sw: supplied by regulator-dummy
[ 0.405309] axp20x-i2c 2-0036: AXP20X driver loaded
[ 0.409682] sdhci: Secure Digital Host Controller Interface driver
[ 0.409688] sdhci: Copyright(c) Pierre Ossman
[ 0.409821] Synopsys Designware Multimedia Card Interface Driver
[ 0.410257] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.411059] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.411243] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.411447] usbcore: registered new interface driver usbhid
[ 0.411449] usbhid: USB HID core driver
[ 0.413191] NET: Registered protocol family 17
[ 0.413327] 9pnet: Installing 9P2000 support
[ 0.413378] Key type dns_resolver registered
[ 0.413946] registered taskstats version 1
[ 0.413949] Loading compiled-in X.509 certificates
[ 0.425868] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
[ 0.426155] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-ph not found, using dummy regulator
[ 0.426576] printk: console [ttyS0] disabled
[ 0.447487] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 17, base_baud = 1500000) is a 16550A
[ 0.447529] printk: console [ttyS0] enabled
[ 0.448134] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pc not found, using dummy regulator
[ 0.553853] ehci-platform 5311000.usb: EHCI Host Controller
[ 0.553902] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3
[ 0.555183] ehci-platform 5311000.usb: irq 24, io mem 0x05311000
[ 0.569844] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
[ 0.570156] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 0.570171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.570183] usb usb3: Product: EHCI Host Controller
[ 0.570195] usb usb3: Manufacturer: Linux 5.2.0-rc1 ehci_hcd
[ 0.570207] usb usb3: SerialNumber: 5311000.usb
[ 0.571077] hub 3-0:1.0: USB hub found
[ 0.571136] hub 3-0:1.0: 1 port detected
[ 0.572469] ohci-platform 5311400.usb: Generic Platform OHCI controller
[ 0.572502] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 4
[ 0.572981] ohci-platform 5311400.usb: irq 25, io mem 0x05311400
[ 0.634223] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[ 0.634238] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.634250] usb usb4: Product: Generic Platform OHCI controller
[ 0.634262] usb usb4: Manufacturer: Linux 5.2.0-rc1 ohci_hcd
[ 0.634274] usb usb4: SerialNumber: 5311400.usb
[ 0.635113] hub 4-0:1.0: USB hub found
[ 0.635182] hub 4-0:1.0: 1 port detected
[ 0.636656] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[ 0.637351] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 0.637369] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
[ 0.637652] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[ 0.637667] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.637679] usb usb5: Product: MUSB HDRC host driver
[ 0.637691] usb usb5: Manufacturer: Linux 5.2.0-rc1 musb-hcd
[ 0.637703] usb usb5: SerialNumber: musb-hdrc.1.auto
[ 0.638514] hub 5-0:1.0: USB hub found
[ 0.638571] hub 5-0:1.0: 1 port detected
[ 0.641504] thermal thermal_zone0: failed to read out thermal zone (-16)
[ 0.641550] thermal thermal_zone1: failed to read out thermal zone (-16)
[ 0.641969] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pf not found, using dummy regulator
[ 0.642531] sunxi-mmc 4020000.mmc: Got CD GPIO
[ 0.668070] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
[ 0.669708] sun50i-h6-pinctrl 300b000.pinctrl: 300b000.pinctrl supply vcc-pd not found, using dummy regulator
[ 0.669931] vcc-gmac-3v3: supplied by vcc-ac200
[ 0.670892] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:05 UTC (5)
[ 0.671470] vdd-gpu: disabling
[ 0.671854] vcc-gmac-3v3: disabling
[ 0.671863] ALSA device list:
[ 0.671871] No soundcards found.
[ 0.672645] Freeing unused kernel memory: 512K
[ 0.701878] Run /init as init process
[ 0.706758] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.709932] mmc0: new high speed SDHC card at address aaaa
[ 0.711976] mmcblk0: mmc0:aaaa SB32G 29.7 GiB
[ 0.714712] mmcblk0: p1 p2
[ 0.725322] random: fast init done
[ 0.802308] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
[ 0.909822] usb 3-1: new high-speed USB device number 2 using ehci-platform
[ 1.067620] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice= 9.01
[ 1.067634] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.067643] usb 3-1: Product: USB2.0 Hub
[ 1.068542] hub 3-1:1.0: USB hub found
[ 1.068863] hub 3-1:1.0: 4 ports detected
[ 1.315230] systemd[1]: System time before build time, advancing clock.
[ 1.357819] usb 3-1.1: new low-speed USB device number 3 using ehci-platform
[ 1.403536] NET: Registered protocol family 10
[ 1.404140] Segment Routing with IPv6
[ 1.457447] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 1.458107] systemd[1]: Detected architecture arm64.
[ 1.470723] usb 3-1.1: New USB device found, idVendor=1bcf, idProduct=0007, bcdDevice= 0.10
[ 1.470730] usb 3-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.470735] usb 3-1.1: Product: USB Optical Mouse
[ 1.488755] systemd[1]: Set hostname to <opi-h6>.
[ 1.509337] input: USB Optical Mouse as /devices/platform/soc/5311000.usb/usb3/3-1/3-1.1/3-1.1:1.0/0003:1BCF:0007.0001/input/input0
[ 1.509723] input: USB Optical Mouse as /devices/platform/soc/5311000.usb/usb3/3-1/3-1.1/3-1.1:1.0/0003:1BCF:0007.0001/input/input1
[ 1.510088] hid-generic 0003:1BCF:0007.0001: input,hiddev96,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-5311000.usb-1.1/input0
[ 1.597802] usb 3-1.4: new low-speed USB device number 4 using ehci-platform
[ 1.711745] usb 3-1.4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[ 1.711759] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.711768] usb 3-1.4: Product: USB Keyboard
[ 1.711777] usb 3-1.4: Manufacturer: SIGMACHIP
[ 1.720789] input: SIGMACHIP USB Keyboard as /devices/platform/soc/5311000.usb/usb3/3-1/3-1.4/3-1.4:1.0/0003:1C4F:0002.0002/input/input2
[ 1.776868] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 1.776880] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 1.778364] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-5311000.usb-1.4/input0
[ 1.784862] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/soc/5311000.usb/usb3/3-1/3-1.4/3-1.4:1.1/0003:1C4F:0002.0003/input/input3
[ 1.842248] input: SIGMACHIP USB Keyboard System Control as /devices/platform/soc/5311000.usb/usb3/3-1/3-1.4/3-1.4:1.1/0003:1C4F:0002.0003/input/input4
[ 1.842624] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-5311000.usb-1.4/input1
[ 1.927727] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.928608] systemd[1]: Created slice User and Session Slice.
[ 1.942073] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.942157] systemd[1]: Reached target Remote File Systems.
[ 1.958246] random: systemd: uninitialized urandom read (16 bytes read)
[ 1.958948] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.978044] systemd[1]: Reached target Swap.
[ 1.991262] systemd[1]: Created slice System Slice.
[ 2.302534] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
[ 2.742650] systemd-journald[1382]: Received request to flush runtime journal from PID 1
[ 2.893934] media: Linux media interface: v0.10
[ 2.916732] videodev: Linux video capture interface: v2.00
[ 2.970628] Registered IR keymap rc-empty
[ 2.970716] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
[ 2.970810] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input5
[ 2.971013] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
[ 2.971206] sunxi-ir 7040000.ir: initialized sunXi IR driver
[ 2.983778] asoc-simple-card sound_spdif: dit-hifi <-> 5093000.spdif mapping ok
[ 3.000243] dwmac-sun8i 5020000.ethernet: PTP uses main clock
[ 3.001152] sun4i-drm display-engine: bound 1100000.mixer (ops sun8i_mixer_platform_driver_exit [sun8i_mixer])
[ 3.001386] sun4i-drm display-engine: bound 6510000.tcon-top (ops sun8i_tcon_top_platform_driver_exit [sun8i_tcon_top])
[ 3.001672] sun4i-drm display-engine: bound 6515000.lcd-controller (ops sun4i_tcon_platform_driver_exit [sun4i_tcon])
[ 3.003772] sun8i-dw-hdmi 6000000.hdmi: 6000000.hdmi supply hvcc not found, using dummy regulator
[ 3.007453] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
[ 3.009400] cedrus 1c0e000.video-codec: Device registered as /dev/video0
[ 3.106477] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
[ 3.109456] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
[ 3.109646] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0)
[ 3.109666] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
[ 3.109670] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
[ 3.109673] dwmac-sun8i 5020000.ethernet: COE Type 2
[ 3.109677] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
[ 3.109680] dwmac-sun8i 5020000.ethernet: Normal descriptors
[ 3.109684] dwmac-sun8i 5020000.ethernet: Chain mode enabled
[ 3.109697] dwmac-sun8i 5020000.ethernet (unnamed net_device) (uninitialized): device MAC address ca:fd:d0:61:30:d6
[ 3.110100] libphy: stmmac: probed
[ 3.110468] sun4i-drm display-engine: bound 6000000.hdmi (ops sun8i_dw_hdmi_ops [sun8i_drm_hdmi])
[ 3.110476] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.110478] [drm] No driver support for vblank timestamp query.
[ 3.111309] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
[ 3.272726] Console: switching to colour frame buffer device 240x67
[ 3.311955] sun4i-drm display-engine: fb0: sun4i-drmdrmfb frame buffer device
[ 3.362566] asoc-simple-card sound: i2s-hifi <-> 5091000.i2s mapping ok
[ 3.369828] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.837837] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 3.839661] dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
[ 3.839674] dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
[ 3.839681] dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
[ 7.938342] dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 7.938389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.101683] random: crng init done
[ 12.101695] random: 7 urandom warning(s) missed due to ratelimiting
Module Size Used by
snd_soc_hdmi_codec 16384 1
dw_hdmi_i2s_audio 16384 0
dw_hdmi_cec 16384 0
sunxi_cedrus 32768 0
crct10dif_ce 16384 1
dwmac_sun8i 20480 0
sun8i_drm_hdmi 24576 0
snd_soc_simple_card 20480 0
dw_hdmi 28672 2 sun8i_drm_hdmi,dw_hdmi_i2s_audio
snd_soc_simple_card_utils 20480 1 snd_soc_simple_card
snd_soc_spdif_tx 16384 1
sunxi_cir 16384 0
cec 49152 3 sun8i_drm_hdmi,dw_hdmi_cec,dw_hdmi
videobuf2_dma_contig 20480 1 sunxi_cedrus
videobuf2_memops 16384 1 videobuf2_dma_contig
rc_core 32768 2 sunxi_cir
v4l2_mem2mem 20480 1 sunxi_cedrus
mdio_mux 16384 1 dwmac_sun8i
videobuf2_v4l2 24576 2 sunxi_cedrus,v4l2_mem2mem
videobuf2_common 49152 3 sunxi_cedrus,videobuf2_v4l2,v4l2_mem2mem
sun4i_drm 20480 0
videodev 192512 4 sunxi_cedrus,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem
sun4i_frontend 16384 1 sun4i_drm
sun4i_tcon 28672 1 sun4i_drm
sun8i_mixer 40960 0
media 32768 5 sunxi_cedrus,videodev,videobuf2_v4l2,videobuf2_common,v4l2_mem2mem
sun8i_tcon_top 16384 4 sun8i_drm_hdmi,sun4i_tcon,sun4i_drm
ip_tables 32768 0
x_tables 28672 1 ip_tables
ipv6 344064 18
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment