avafinger/Kernel 5.4.1 NanoPi M4 - Wifi

## Kernel 5.4.1 NanoPi M4 - Wifi
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.4.1-rk3399 (ubuntu@nanopi-m4) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #1 SMP PREEMPT Sun Dec 1 21:37:18 UTC 2019
[    0.000000] Machine model: FriendlyElec NanoPi M4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x0000000079c00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x7fbaf800-0x7fbb0fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] On node 0 totalpages: 523776
[    0.000000]   DMA32 zone: 8184 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 523776 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
[    0.000000] pcpu-alloc: s52952 r8192 d28968 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 515592
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1961992K/2095104K available (11772K kernel code, 1826K rwdata, 6372K rodata, 5056K init, 446K bss, 67576K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7f480000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x000000007f440000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007f450000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000010] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.003840] Console: colour dummy device 80x25
[    0.005219] printk: console [tty0] enabled
[    0.005399] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005458] pid_max: default: 32768 minimum: 301
[    0.005670] LSM: Security Framework initializing
[    0.005823] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.005883] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.031937] ASID allocator initialised with 32768 entries
[    0.039937] rcu: Hierarchical SRCU implementation.
[    0.048128] Platform MSI: interrupt-controller@fee20000 domain created
[    0.048668] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.056534] EFI services will not be available.
[    0.061366] smp: Bringing up secondary CPUs ...
[    0.093661] Detected VIPT I-cache on CPU1
[    0.093712] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.093733] GICv3: CPU1: using allocated LPI pending table @0x000000007f460000
[    0.093792] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.125786] Detected VIPT I-cache on CPU2
[    0.125828] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.125845] GICv3: CPU2: using allocated LPI pending table @0x000000007f470000
[    0.125890] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.157937] Detected VIPT I-cache on CPU3
[    0.157976] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.157994] GICv3: CPU3: using allocated LPI pending table @0x000000007f500000
[    0.158036] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.192760] CPU features: detected: EL2 vector hardening
[    0.193135] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.193537] Detected PIPT I-cache on CPU4
[    0.194691] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.195137] GICv3: CPU4: using allocated LPI pending table @0x000000007f510000
[    0.196341] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.236535] Detected PIPT I-cache on CPU5
[    0.237662] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.238095] GICv3: CPU5: using allocated LPI pending table @0x000000007f520000
[    0.239155] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.244189] smp: Brought up 1 node, 6 CPUs
[    0.244809] SMP: Total of 6 processors activated.
[    0.244850] CPU features: detected: 32-bit EL0 Support
[    0.244895] CPU features: detected: CRC32 instructions
[    0.401056] CPU: All CPU(s) started at EL2
[    0.401804] alternatives: patching kernel code
[    0.406797] devtmpfs: initialized
[    0.433696] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.433969] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.439308] pinctrl core: initialized pinctrl subsystem
[    0.443983] DMI not present or invalid.
[    0.445287] NET: Registered protocol family 16
[    0.469654] DMA: preallocated 256 KiB pool for atomic allocations
[    0.469767] audit: initializing netlink subsys (disabled)
[    0.471485] audit: type=2000 audit(0.464:1): state=initialized audit_enabled=0 res=1
[    0.474388] cpuidle: using governor menu
[    0.475509] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.481571] Serial: AMBA PL011 UART driver
[    0.573621] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.573923] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.573960] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.574032] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.586805] cryptd: max_cpu_qlen set to 1000
[    0.614505] ACPI: Interpreter disabled.
[    0.621145] vcc5v0_core: supplied by vdd_5v
[    0.621582] vcc5v0_sys: supplied by vdd_5v
[    0.621771] vbus_typec: supplied by vdd_5v
[    0.622075] vcc5v0_usb1: supplied by vcc5v0_sys
[    0.622494] vcc3v3_sys: supplied by vcc5v0_core
[    0.622621] vcc3v0_sd: supplied by vcc3v3_sys
[    0.622918] vcc5v0_usb2: supplied by vcc5v0_sys
[    0.626572] iommu: Default domain type: Translated
[    0.631049] vgaarb: loaded
[    0.631957] SCSI subsystem initialized
[    0.633772] libata version 3.00 loaded.
[    0.634262] usbcore: registered new interface driver usbfs
[    0.634379] usbcore: registered new interface driver hub
[    0.634861] usbcore: registered new device driver usb
[    0.637427] pps_core: LinuxPPS API ver. 1 registered
[    0.637472] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.637566] PTP clock support registered
[    0.637996] EDAC MC: Ver: 3.0.0
[    0.642223] FPGA manager framework
[    0.642563] Advanced Linux Sound Architecture Driver Initialized.
[    0.645416] clocksource: Switched to clocksource arch_sys_counter
[    0.646200] VFS: Disk quotas dquot_6.6.0
[    0.646354] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.647128] pnp: PnP ACPI: disabled
[    0.660935] thermal_sys: Registered thermal governor 'step_wise'
[    0.660966] thermal_sys: Registered thermal governor 'power_allocator'
[    0.662498] NET: Registered protocol family 2
[    0.663492] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    0.663617] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.663986] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.664570] TCP: Hash tables configured (established 16384 bind 16384)
[    0.664877] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.665025] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.666269] NET: Registered protocol family 1
[    0.669160] RPC: Registered named UNIX socket transport module.
[    0.669203] RPC: Registered udp transport module.
[    0.669316] RPC: Registered tcp transport module.
[    0.669347] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.669393] PCI: CLS 0 bytes, default 64
[    0.669892] Unpacking initramfs...
[    0.790494] Freeing initrd memory: 1128K
[    0.802451] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.805055] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.806344] kvm [1]: IPA Size Limit: 40bits
[    0.808497] kvm [1]: vgic-v2@fff20000
[    0.808869] kvm [1]: GIC system register CPU interface enabled
[    0.812109] kvm [1]: vgic interrupt IRQ10
[    0.814153] kvm [1]: Hyp mode initialized successfully
[    0.843807] Initialise system trusted keyrings
[    0.844882] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.861043] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.864184] NFS: Registering the id_resolver key type
[    0.864295] Key type id_resolver registered
[    0.864323] Key type id_legacy registered
[    0.864364] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.908280] Key type asymmetric registered
[    0.908369] Asymmetric key parser 'x509' registered
[    0.908489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.908532] io scheduler mq-deadline registered
[    0.908560] io scheduler kyber registered
[    0.965507] EINJ: ACPI disabled.
[    0.983661] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.983851] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.987287] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.987359] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.014787] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.020195] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[    1.020736] serial serial0: tty port ttyS0 registered
[    1.022258] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[    1.121599] printk: console [ttyS2] enabled
[    1.126369] SuperH (H)SCI(F) driver initialized
[    1.128835] msm_serial: driver initialized
[    1.134608] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    1.154056] loop: module loaded
[    1.169929] libphy: Fixed MDIO Bus: probed
[    1.171141] tun: Universal TUN/TAP device driver, 1.6
[    1.175143] thunder_xcv, ver 1.0
[    1.175589] thunder_bgx, ver 1.0
[    1.175973] nicpf, ver 1.0
[    1.178485] hclge is initializing
[    1.178817] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    1.179480] hns3: Copyright (c) 2017 Huawei Corporation.
[    1.180137] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.180679] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.181429] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    1.182070] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.182696] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    1.183415] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.185126] sky2: driver version 1.30
[    1.188090] VFIO - User Level meta-driver version: 0.3
[    1.201140] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    1.218187] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.218991] ehci-pci: EHCI PCI platform driver
[    1.219478] ehci-platform: EHCI generic platform driver
[    1.222774] ehci-platform fe380000.usb: EHCI Host Controller
[    1.223368] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    1.224490] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    1.237677] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.240520] hub 1-0:1.0: USB hub found
[    1.240944] hub 1-0:1.0: 1 port detected
[    1.244577] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.245145] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    1.246194] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    1.261492] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.263387] hub 2-0:1.0: USB hub found
[    1.263805] hub 2-0:1.0: 1 port detected
[    1.265402] ehci-orion: EHCI orion driver
[    1.266278] ehci-exynos: EHCI EXYNOS driver
[    1.266990] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.267682] ohci-pci: OHCI PCI platform driver
[    1.268202] ohci-platform: OHCI generic platform driver
[    1.269163] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.269949] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    1.271108] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    1.335168] hub 3-0:1.0: USB hub found
[    1.335658] hub 3-0:1.0: 1 port detected
[    1.337074] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.337781] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    1.338762] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    1.402667] hub 4-0:1.0: USB hub found
[    1.403091] hub 4-0:1.0: 1 port detected
[    1.404522] ohci-exynos: OHCI EXYNOS driver
[    1.406973] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.407559] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    1.408544] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.409565] xhci-hcd xhci-hcd.0.auto: irq 227, io mem 0xfe800000
[    1.412256] hub 5-0:1.0: USB hub found
[    1.412692] hub 5-0:1.0: 1 port detected
[    1.413932] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.414471] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    1.415205] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    1.415919] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.417870] hub 6-0:1.0: USB hub found
[    1.418282] hub 6-0:1.0: 1 port detected
[    1.419617] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.420157] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    1.421186] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    1.422367] xhci-hcd xhci-hcd.1.auto: irq 228, io mem 0xfe900000
[    1.424495] hub 7-0:1.0: USB hub found
[    1.424909] hub 7-0:1.0: 1 port detected
[    1.425974] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    1.426507] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    1.427237] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    1.427951] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.429873] hub 8-0:1.0: USB hub found
[    1.430281] hub 8-0:1.0: 1 port detected
[    1.432426] usbcore: registered new interface driver usb-storage
[    1.444177] i2c /dev entries driver
[    1.454269] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    1.455141] fan53555-reg: supplied by vcc3v3_sys
[    1.458258] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    1.458930] fan53555-reg: supplied by vcc3v3_sys
[    1.462005] rk808 0-001b: chip id: 0x0
[    1.470068] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.470811] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.471497] DCDC_REG1: supplied by vcc3v3_sys
[    1.473585] DCDC_REG2: supplied by vcc3v3_sys
[    1.474804] DCDC_REG3: supplied by vcc3v3_sys
[    1.475588] DCDC_REG4: supplied by vcc3v3_sys
[    1.476771] LDO_REG1: supplied by vcc3v3_sys
[    1.478875] LDO_REG2: supplied by vcc3v3_sys
[    1.480493] LDO_REG3: supplied by vcc3v3_sys
[    1.482340] LDO_REG4: supplied by vcc3v3_sys
[    1.484149] LDO_REG5: supplied by vcc3v3_sys
[    1.485813] LDO_REG6: supplied by vcc3v3_sys
[    1.487617] LDO_REG7: supplied by vcc3v3_sys
[    1.489317] LDO_REG8: supplied by vcc3v3_sys
[    1.491108] SWITCH_REG1: supplied by vcc3v3_sys
[    1.492126] SWITCH_REG2: supplied by vcc3v3_sys
[    1.519013] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[    1.520377] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[    1.523524] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[    1.526170] random: fast init done
[    1.526897] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[    1.530437] sdhci: Secure Digital Host Controller Interface driver
[    1.530986] sdhci: Copyright(c) Pierre Ossman
[    1.531787] Synopsys Designware Multimedia Card Interface Driver
[    1.533177] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.533846] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.534450] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.534992] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    1.535937] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.536463] mmc_host mmc0: card is non-removable.
[    1.549956] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.564045] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.564727] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.565345] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.565907] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    1.566908] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
[    1.580439] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.595234] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.596978] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.597520] mmc2: CQHCI version 5.10
[    1.599222] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.601381] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.604744] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.622315] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.624990] ledtrig-cpu: registered to indicate activity on CPUs
[    1.626764] usbcore: registered new interface driver usbhid
[    1.627259] usbhid: USB HID core driver
[    1.631824] NET: Registered protocol family 17
[    1.632290] Key type dns_resolver registered
[    1.633019] registered taskstats version 1
[    1.633421] Loading compiled-in X.509 certificates
[    1.654160] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.655154] hctosys: unable to open rtc device (rtc0)
[    1.656273] ALSA device list:
[    1.656543]   No soundcards found.
[    1.657011] ttyS2 - failed to request DMA
[    1.659060] Freeing unused kernel memory: 5056K
[    1.661030] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    1.673591] Run /init as init process
[    1.673959] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    1.761388] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    1.921709] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 182
[    1.923560] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    1.949157] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 206
[    1.949818] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    1.951134] mmcblk1: mmc1:aaaa SB32G 29.7 GiB
[    1.954471]  mmcblk1: p1 p2
[    1.972491] hub 7-1:1.0: USB hub found
[    1.973075] hub 7-1:1.0: 4 ports detected
[    2.067096] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    2.180616] hub 8-1:1.0: USB hub found
[    2.181316] hub 8-1:1.0: 4 ports detected
[    2.765430] usb 7-1.4: new high-speed USB device number 3 using xhci-hcd
[    2.964587] hub 7-1.4:1.0: USB hub found
[    2.965391] hub 7-1.4:1.0: 4 ports detected
[    3.253429] usb 7-1.4.1: new low-speed USB device number 4 using xhci-hcd
[    3.416975] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.1/7-1.4.1:1.0/0003:1BCF:0007.0001/input/input1
[    3.418795] input: USB Optical Mouse as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.1/7-1.4.1:1.0/0003:1BCF:0007.0001/input/input2
[    3.420355] hid-generic 0003:1BCF:0007.0001: input: USB HID v1.10 Mouse [USB Optical Mouse] on usb-xhci-hcd.1.auto-1.4.1/input0
[    3.501429] usb 7-1.4.3: new low-speed USB device number 5 using xhci-hcd
[    3.703912] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.0/0003:1C4F:0002.0002/input/input3
[    3.765840] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input0
[    3.770948] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0003/input/input4
[    3.829805] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0003/input/input5
[    3.831658] hid-generic 0003:1C4F:0002.0003: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input1
[    6.741125] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[    7.086194] systemd[1]: System time before build time, advancing clock.
[    7.419967] NET: Registered protocol family 10
[    7.421117] Segment Routing with IPv6
[    7.469608] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    7.472007] systemd[1]: Detected architecture arm64.
[    7.516547] systemd[1]: Set hostname to <nanopi-m4>.
[    7.518373] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    7.713345] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    7.714859] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    7.821327] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
[    7.921449] random: systemd: uninitialized urandom read (16 bytes read)
[    7.922421] systemd[1]: Listening on udev Kernel Socket.
[    7.923915] random: systemd: uninitialized urandom read (16 bytes read)
[    7.924888] systemd[1]: Listening on Journal Socket.
[    7.937660] random: systemd: uninitialized urandom read (16 bytes read)
[    7.941485] systemd[1]: Starting Nameserver information manager...
[    8.065544] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[    8.156290] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[    8.505016] systemd-journald[261]: Received request to flush runtime journal from PID 1
[    8.805223] vcc1v8_s3: supplied by vcc_1v8
[    8.937679] rk808-rtc rk808-rtc: registered as rtc0
[    9.049848] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[    9.049860] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    9.049869] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    9.049877] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    9.224319] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[    9.224919] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[    9.225580] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[    9.225677] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    9.225683] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    9.225687] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    9.225696] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    9.225731] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    9.226358] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    9.231439] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    9.231655] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[    9.231662] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[    9.231667] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[    9.231671] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[    9.231674] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[    9.231677] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[    9.231680] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[    9.231706] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[    9.231709] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[    9.231713] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    9.231722] rk_gmac-dwmac fe300000.ethernet: device MAC address 9e:af:09:2b:bc:79
[    9.297266] libphy: stmmac: probed
[    9.556685] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.567980] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.577340] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    9.578010] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    9.735713] panfrost ff9a0000.gpu: clock rate = 500000000
[    9.735928] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[    9.735931] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[    9.735935] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[    9.735937] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[    9.736798] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[    9.936250] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[    9.959400] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4356-sdio.friendlyarm,nanopi-m4.txt failed with error -2
[    9.959405] brcmfmac mmc0:0001:1: Falling back to sysfs fallback for: brcm/brcmfmac4356-sdio.friendlyarm,nanopi-m4.txt
[   10.035219] random: crng init done
[   10.035229] random: 7 urandom warning(s) missed due to ratelimiting
[   10.038387] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[   10.039239] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[   10.039501] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: May 14 2014 19:51:52 version 7.35.17 (r477908) FWID 01-2ed3ee81
[   10.065030] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[   10.065344] rockchip-vop ff900000.vop: Adding to iommu group 2
[   10.070709] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   10.074265] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   10.074764] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   10.077507] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[   10.077524] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   10.077536] [drm] No driver support for vblank timestamp query.
[   10.152238] Console: switching to colour frame buffer device 240x67
[   10.191990] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[   10.217933] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   10.262264] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   10.262340] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
[   10.457858] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[   10.457872] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[   10.748179] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet]
[   10.761317] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   10.761350] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   10.761366] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[   12.110916] Filesystem uses "xz" compression. This is not supported
[   15.782312] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready