Mainline Kernel 5.6.2 NanoPi M4

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.6.2 (alex@svn) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12-rc1)) #1 SMP PREEMPT Tue Apr 7 08:52:09 -03 2020
[    0.000000] Machine model: FriendlyElec NanoPi M4
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 64 MiB at 0x0000000079c00000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] NUMA: NODE_DATA [mem 0x7fbac100-0x7fbadfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000200000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
[    0.000000] On node 0 totalpages: 523776
[    0.000000]   DMA zone: 4088 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 261632 pages, LIFO batch:63
[    0.000000]   DMA32 zone: 4096 pages used for memmap
[    0.000000]   DMA32 zone: 262144 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.0
[    0.000000] percpu: Embedded 23 pages/cpu s53272 r8192 d32744 u94208
[    0.000000] pcpu-alloc: s53272 r8192 d32744 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 515592
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: earlyprintk root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[    0.000000] Memory: 1894896K/2095104K available (12412K kernel code, 1858K rwdata, 6780K rodata, 5120K init, 461K bss, 134672K reserved, 65536K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 256 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support, no RVPEID support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
[    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @7f080000 (flat, esz 8, psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GICv3: using LPI property table @0x000000007f040000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GICv3: CPU0: using allocated LPI pending table @0x000000007f050000
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] random: get_random_bytes called from start_kernel+0x2a8/0x444 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.004104] Console: colour dummy device 80x25
[    0.005552] printk: console [tty0] enabled
[    0.005745] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.005805] pid_max: default: 32768 minimum: 301
[    0.006027] LSM: Security Framework initializing
[    0.006184] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.006244] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.040209] rcu: Hierarchical SRCU implementation.
[    0.048427] Platform MSI: interrupt-controller@fee20000 domain created
[    0.048977] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.057663] EFI services will not be available.
[    0.065840] smp: Bringing up secondary CPUs ...
[    0.098141] Detected VIPT I-cache on CPU1
[    0.098193] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.098214] GICv3: CPU1: using allocated LPI pending table @0x000000007f060000
[    0.098275] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.130270] Detected VIPT I-cache on CPU2
[    0.130313] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.130331] GICv3: CPU2: using allocated LPI pending table @0x000000007f070000
[    0.130374] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    0.162425] Detected VIPT I-cache on CPU3
[    0.162468] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.162486] GICv3: CPU3: using allocated LPI pending table @0x000000007f100000
[    0.162530] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    0.197118] CPU features: detected: EL2 vector hardening
[    0.197544] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[    0.197865] CPU features: detected: ARM erratum 1319367
[    0.198121] Detected PIPT I-cache on CPU4
[    0.199359] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.199828] GICv3: CPU4: using allocated LPI pending table @0x000000007f110000
[    0.201091] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
[    0.241007] Detected PIPT I-cache on CPU5
[    0.242192] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.242630] GICv3: CPU5: using allocated LPI pending table @0x000000007f120000
[    0.243719] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
[    0.249072] smp: Brought up 1 node, 6 CPUs
[    0.249708] SMP: Total of 6 processors activated.
[    0.249750] CPU features: detected: 32-bit EL0 Support
[    0.249795] CPU features: detected: CRC32 instructions
[    0.434920] CPU: All CPU(s) started at EL2
[    0.435708] alternatives: patching kernel code
[    0.440958] devtmpfs: initialized
[    0.466888] KASLR disabled due to lack of seed
[    0.467949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.468029] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.473769] pinctrl core: initialized pinctrl subsystem
[    0.478256] thermal_sys: Registered thermal governor 'step_wise'
[    0.479575] DMI not present or invalid.
[    0.481373] NET: Registered protocol family 16
[    0.507301] DMA: preallocated 256 KiB pool for atomic allocations
[    0.507478] audit: initializing netlink subsys (disabled)
[    0.508465] audit: type=2000 audit(0.500:1): state=initialized audit_enabled=0 res=1
[    0.512060] cpuidle: using governor menu
[    0.513016] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.516382] ASID allocator initialised with 65536 entries
[    0.605950] Serial: AMBA PL011 UART driver
[    3.131018] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    3.132157] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    3.132993] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    3.134226] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    3.251066] cryptd: max_cpu_qlen set to 1000
[    3.362106] ACPI: Interpreter disabled.
[    3.370830] vcc5v0_core: supplied by vdd_5v
[    3.371359] vcc5v0_sys: supplied by vdd_5v
[    3.371521] vbus_typec: supplied by vdd_5v
[    3.371901] vcc5v0_usb1: supplied by vcc5v0_sys
[    3.372292] vcc3v3_sys: supplied by vcc5v0_core
[    3.372428] vcc3v0_sd: supplied by vcc3v3_sys
[    3.372928] vcc5v0_usb2: supplied by vcc5v0_sys
[    3.377658] iommu: Default domain type: Translated 
[    3.382534] vgaarb: loaded
[    3.383942] SCSI subsystem initialized
[    3.385899] libata version 3.00 loaded.
[    3.386712] usbcore: registered new interface driver usbfs
[    3.386842] usbcore: registered new interface driver hub
[    3.387129] usbcore: registered new device driver usb
[    3.390185] pps_core: LinuxPPS API ver. 1 registered
[    3.390228] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.390296] PTP clock support registered
[    3.390816] EDAC MC: Ver: 3.0.0
[    3.396174] FPGA manager framework
[    3.396546] Advanced Linux Sound Architecture Driver Initialized.
[    3.400232] clocksource: Switched to clocksource arch_sys_counter
[    3.401726] VFS: Disk quotas dquot_6.6.0
[    3.401981] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.402540] pnp: PnP ACPI: disabled
[    3.417219] NET: Registered protocol family 2
[    3.418354] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    3.418489] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    3.418867] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    3.419466] TCP: Hash tables configured (established 16384 bind 16384)
[    3.419777] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    3.420427] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    3.421044] NET: Registered protocol family 1
[    3.424128] RPC: Registered named UNIX socket transport module.
[    3.424174] RPC: Registered udp transport module.
[    3.424203] RPC: Registered tcp transport module.
[    3.424231] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.424299] PCI: CLS 0 bytes, default 64
[    3.424825] Unpacking initramfs...
[    3.542177] Freeing initrd memory: 1128K
[    3.552861] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    3.555565] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    3.557034] kvm [1]: IPA Size Limit: 40bits
[    3.559329] kvm [1]: vgic-v2@fff20000
[    3.559547] kvm [1]: GIC system register CPU interface enabled
[    3.562823] kvm [1]: vgic interrupt IRQ10
[    3.565015] kvm [1]: Hyp mode initialized successfully
[    3.596989] Initialise system trusted keyrings
[    3.598221] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    3.616804] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.620554] NFS: Registering the id_resolver key type
[    3.620722] Key type id_resolver registered
[    3.620750] Key type id_legacy registered
[    3.620793] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.663551] Key type asymmetric registered
[    3.663630] Asymmetric key parser 'x509' registered
[    3.663785] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    3.663828] io scheduler mq-deadline registered
[    3.664010] io scheduler kyber registered
[    3.727598] EINJ: ACPI disabled.
[    3.748223] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    3.748399] dma-pl330 ff6d0000.dma-controller: 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    3.751540] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    3.751612] dma-pl330 ff6e0000.dma-controller: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    3.781989] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.789297] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 39, base_baud = 1500000) is a 16550A
[    3.789974] serial serial0: tty port ttyS0 registered
[    3.791746] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 40, base_baud = 1500000) is a 16550A
[    3.888940] printk: console [ttyS2] enabled
[    3.894567] SuperH (H)SCI(F) driver initialized
[    3.897337] msm_serial: driver initialized
[    3.903640] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    3.923149] loop: module loaded
[    3.941912] libphy: Fixed MDIO Bus: probed
[    3.943102] tun: Universal TUN/TAP device driver, 1.6
[    3.947477] thunder_xcv, ver 1.0
[    3.948034] thunder_bgx, ver 1.0
[    3.948466] nicpf, ver 1.0
[    3.951102] hclge is initializing
[    3.953717] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    3.954404] hns3: Copyright (c) 2017 Huawei Corporation.
[    3.955193] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.955733] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.956412] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    3.957053] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.957671] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    3.958391] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    3.960437] sky2: driver version 1.30
[    3.963604] VFIO - User Level meta-driver version: 0.3
[    3.977696] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
[    4.207535] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.210180] ehci-pci: EHCI PCI platform driver
[    4.213772] ehci-platform: EHCI generic platform driver
[    4.229558] ehci-platform fe380000.usb: EHCI Host Controller
[    4.233232] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    4.240095] ehci-platform fe380000.usb: irq 31, io mem 0xfe380000
[    4.257722] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    4.288950] hub 1-0:1.0: USB hub found
[    4.291948] hub 1-0:1.0: 1 port detected
[    4.322782] ehci-platform fe3c0000.usb: EHCI Host Controller
[    4.325924] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    4.333135] ehci-platform fe3c0000.usb: irq 33, io mem 0xfe3c0000
[    4.349712] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    4.381668] hub 2-0:1.0: USB hub found
[    4.385211] hub 2-0:1.0: 1 port detected
[    4.391596] ehci-orion: EHCI orion driver
[    4.394078] ehci-exynos: EHCI Exynos driver
[    4.395012] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.395750] ohci-pci: OHCI PCI platform driver
[    4.396749] ohci-platform: OHCI generic platform driver
[    4.399653] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    4.400482] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    4.402311] ohci-platform fe3a0000.usb: irq 32, io mem 0xfe3a0000
[    4.467088] hub 3-0:1.0: USB hub found
[    4.467560] hub 3-0:1.0: 1 port detected
[    4.470648] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    4.471339] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    4.472708] ohci-platform fe3e0000.usb: irq 34, io mem 0xfe3e0000
[    4.537601] hub 4-0:1.0: USB hub found
[    4.538025] hub 4-0:1.0: 1 port detected
[    4.540858] ohci-exynos: OHCI Exynos driver
[    4.546454] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.547087] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[    4.548298] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    4.549372] xhci-hcd xhci-hcd.0.auto: irq 227, io mem 0xfe800000
[    4.553080] hub 5-0:1.0: USB hub found
[    4.553528] hub 5-0:1.0: 1 port detected
[    4.554991] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    4.555554] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[    4.556332] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    4.557082] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.559054] hub 6-0:1.0: USB hub found
[    4.559461] hub 6-0:1.0: 1 port detected
[    4.561565] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.562133] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
[    4.563163] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
[    4.564551] xhci-hcd xhci-hcd.1.auto: irq 228, io mem 0xfe900000
[    4.567044] hub 7-0:1.0: USB hub found
[    4.567457] hub 7-0:1.0: 1 port detected
[    4.568642] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    4.569193] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
[    4.569923] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    4.570651] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.572540] hub 8-0:1.0: USB hub found
[    4.572953] hub 8-0:1.0: 1 port detected
[    4.578060] usbcore: registered new interface driver usb-storage
[    4.592589] i2c /dev entries driver
[    4.606933] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    4.608122] fan53555-reg: supplied by vcc3v3_sys
[    4.611991] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    4.612669] fan53555-reg: supplied by vcc3v3_sys
[    4.616400] rk808 0-001b: chip id: 0x0
[    4.627163] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    4.628076] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    4.628839] DCDC_REG1: supplied by vcc3v3_sys
[    4.631006] DCDC_REG2: supplied by vcc3v3_sys
[    4.632319] DCDC_REG3: supplied by vcc3v3_sys
[    4.633242] DCDC_REG4: supplied by vcc3v3_sys
[    4.634440] LDO_REG1: supplied by vcc3v3_sys
[    4.636412] LDO_REG2: supplied by vcc3v3_sys
[    4.638034] LDO_REG3: supplied by vcc3v3_sys
[    4.639836] LDO_REG4: supplied by vcc3v3_sys
[    4.641692] LDO_REG5: supplied by vcc3v3_sys
[    4.643302] LDO_REG6: supplied by vcc3v3_sys
[    4.645109] LDO_REG7: supplied by vcc3v3_sys
[    4.646723] LDO_REG8: supplied by vcc3v3_sys
[    4.648499] SWITCH_REG1: supplied by vcc3v3_sys
[    4.649393] SWITCH_REG2: supplied by vcc3v3_sys
[    4.687296] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 400000 KHz
[    4.689165] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 408000 KHz
[    4.692714] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
[    4.694715] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
[    4.698221] sdhci: Secure Digital Host Controller Interface driver
[    4.698770] sdhci: Copyright(c) Pierre Ossman
[    4.699573] Synopsys Designware Multimedia Card Interface Driver
[    4.701079] dwmmc_rockchip fe310000.mmc: IDMAC supports 32-bit address mode.
[    4.701715] dwmmc_rockchip fe310000.mmc: Using internal DMA controller.
[    4.702304] dwmmc_rockchip fe310000.mmc: Version ID is 270a
[    4.702827] dwmmc_rockchip fe310000.mmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
[    4.703806] dwmmc_rockchip fe310000.mmc: allocated mmc-pwrseq
[    4.704331] mmc_host mmc0: card is non-removable.
[    4.717793] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.731751] dwmmc_rockchip fe320000.mmc: IDMAC supports 32-bit address mode.
[    4.732426] dwmmc_rockchip fe320000.mmc: Using internal DMA controller.
[    4.733014] dwmmc_rockchip fe320000.mmc: Version ID is 270a
[    4.733553] dwmmc_rockchip fe320000.mmc: DW MMC controller at irq 29,32 bit host data width,256 deep fifo
[    4.734585] dwmmc_rockchip fe320000.mmc: Got CD GPIO
[    4.735212] random: fast init done
[    4.748062] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.760948] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.762792] mmc2: CQHCI version 5.10
[    4.763311] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
[    4.765468] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    4.767584] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
[    4.770883] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
[    4.788715] mmc2: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    4.791425] ledtrig-cpu: registered to indicate activity on CPUs
[    4.792762] usbcore: registered new interface driver usbhid
[    4.793251] usbhid: USB HID core driver
[    4.795893] NET: Registered protocol family 17
[    4.796322] Key type dns_resolver registered
[    4.796913] registered taskstats version 1
[    4.797275] Loading compiled-in X.509 certificates
[    4.811179] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    4.812012] hctosys: unable to open rtc device (rtc0)
[    4.812885] ALSA device list:
[    4.813150]   No soundcards found.
[    4.813578] ttyS2 - failed to request DMA
[    4.815646] Freeing unused kernel memory: 5120K
[    4.832369] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    4.836131] Run /init as init process
[    4.836457]   with arguments:
[    4.836459]     /init
[    4.836460]     earlyprintk
[    4.836461]   with environment:
[    4.836463]     HOME=/
[    4.836464]     TERM=linux
[    4.839799] mmc_host mmc1: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[    4.904002] usb 7-1: new high-speed USB device number 2 using xhci-hcd
[    4.968391] dwmmc_rockchip fe310000.mmc: Successfully tuned phase to 180
[    4.970333] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    4.986925] hub 7-1:1.0: USB hub found
[    4.987484] hub 7-1:1.0: 4 ports detected
[    5.081814] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    5.119757] dwmmc_rockchip fe320000.mmc: Successfully tuned phase to 215
[    5.120431] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[    5.125633] mmcblk1: mmc1:aaaa SB32G 29.7 GiB 
[    5.134972]  mmcblk1: p1 p2
[    5.195291] hub 8-1:1.0: USB hub found
[    5.196002] hub 8-1:1.0: 4 ports detected
[    5.760057] usb 7-1.4: new high-speed USB device number 3 using xhci-hcd
[    5.819288] hub 7-1.4:1.0: USB hub found
[    5.820106] hub 7-1.4:1.0: 4 ports detected
[    6.108056] usb 7-1.4.3: new low-speed USB device number 4 using xhci-hcd
[    6.302516] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.0/0003:1C4F:0002.0001/input/input1
[    6.364680] hid-generic 0003:1C4F:0002.0001: input: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input0
[    6.369793] input: SIGMACHIP USB Keyboard Consumer Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0002/input/input2
[    6.428620] input: SIGMACHIP USB Keyboard System Control as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.1.auto/usb7/7-1/7-1.4/7-1.4.3/7-1.4.3:1.1/0003:1C4F:0002.0002/input/input3
[    6.430538] hid-generic 0003:1C4F:0002.0002: input: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.1.auto-1.4.3/input1
[    9.910026] EXT4-fs (mmcblk1p2): mounted filesystem without journal. Opts: (null)
[   10.295971] systemd[1]: System time before build time, advancing clock.
[   10.612088] NET: Registered protocol family 10
[   10.613349] Segment Routing with IPv6
[   10.643960] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
[   10.658890] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   10.661447] systemd[1]: Detected architecture arm64.
[   10.703084] systemd[1]: Set hostname to <nanopi-m4>.
[   10.704943] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[   10.910946] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   10.912454] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   10.998450] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[   11.073325] random: systemd: uninitialized urandom read (16 bytes read)
[   11.074061] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   11.088219] random: systemd: uninitialized urandom read (16 bytes read)
[   11.089266] systemd[1]: Listening on udev Control Socket.
[   11.100261] random: systemd: uninitialized urandom read (16 bytes read)
[   11.102161] systemd[1]: Created slice User and Session Slice.
[   11.367857] EXT4-fs (mmcblk1p2): re-mounted. Opts: commit=600,errors=remount-ro
[   11.754238] systemd-journald[255]: Received request to flush runtime journal from PID 1
[   11.989212] vcc1v8_s3: supplied by vcc_1v8
[   11.989251] vcca1v8_s3: supplied by vcc1v8_s3
[   12.010504] rk808-rtc rk808-rtc: registered as rtc0
[   12.182588] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
[   12.182604] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[   12.182768] vcca0v9_s3: supplied by vcc1v8_s3
[   12.445384] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[   12.445392] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[   12.445463] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[   12.445568] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[   12.445573] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[   12.445578] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[   12.445585] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[   12.445611] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[   12.446237] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[   12.451297] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[   12.451523] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[   12.451532] rk_gmac-dwmac fe300000.ethernet: 	DWMAC1000
[   12.451537] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[   12.451541] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[   12.451544] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[   12.451547] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[   12.451550] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[   12.451578] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[   12.451582] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[   12.451585] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   12.451594] rk_gmac-dwmac fe300000.ethernet: device MAC address 62:3a:a8:b6:ab:6d
[   12.451949] libphy: stmmac: probed
[   12.711911] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[   12.712794] rockchip-pcie: probe of f8000000.pcie failed with error -110
[   12.770839] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.783769] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.813239] Bluetooth: Core ver 2.22
[   12.813315] NET: Registered protocol family 31
[   12.813318] Bluetooth: HCI device and connection manager initialized
[   12.813331] Bluetooth: HCI socket layer initialized
[   12.813337] Bluetooth: L2CAP socket layer initialized
[   12.813348] Bluetooth: SCO socket layer initialized
[   13.056662] Bluetooth: HCI UART driver ver 2.3
[   13.056669] Bluetooth: HCI UART protocol H4 registered
[   13.056718] Bluetooth: HCI UART protocol LL registered
[   13.057034] Bluetooth: HCI UART protocol Broadcom registered
[   13.176079] ttyS0 - failed to request DMA
[   13.240522] panfrost ff9a0000.gpu: clock rate = 500000000
[   13.240738] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0
[   13.240741] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400
[   13.240745] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[   13.240747] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1
[   13.241478] panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] Failed to register cooling device
[   13.241656] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 0
[   13.276068] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[   13.408007] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4356-sdio for chip BCM4356/2
[   13.408415] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-11), device may have limited channels available
[   13.408716] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4356/2 wl0: Jun 16 2015 14:25:06 version 7.35.184.r1 (TOB) (r559293) FWID 01-b22ae69c
[   13.444392] Bluetooth: hci0: BCM: chip id 101
[   13.444608] Bluetooth: hci0: BCM: features 0x2f
[   13.445595] Bluetooth: hci0: BCM4354A2
[   13.445601] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0000
[   13.472608] rockchip-vop ff8f0000.vop: Adding to iommu group 1
[   13.474603] rockchip-vop ff900000.vop: Adding to iommu group 2
[   13.479030] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
[   13.479545] random: crng init done
[   13.479551] random: 7 urandom warning(s) missed due to ratelimiting
[   13.480591] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
[   13.480729] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   13.481501] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
[   13.481505] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   13.481507] [drm] No driver support for vblank timestamp query.
[   13.548510] Console: switching to colour frame buffer device 240x67
[   13.587393] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[   13.604436] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 1
[   13.649094] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   13.649110] asoc-simple-card hdmi-sound: ASoC: no DMI vendor name!
[   13.845088] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
[   13.845101] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[   14.121050] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=170)
[   14.131901] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[   14.131915] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[   14.131925] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[   14.224539] Bluetooth: hci0: BCM4356A2 (001.003.015) build 0266
[   15.227958] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.227978] Bluetooth: BNEP socket layer initialized
[   15.816908] Filesystem uses "xz" compression. This is not supported
[   20.157507] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   23.211949] Bluetooth: RFCOMM socket layer initialized
[   23.211980] Bluetooth: RFCOMM ver 1.11
[   35.842618] vcca0v9_s3: disabling