Start G-Code

cura-start.gcode

;------------------------------------------
;*** Start Dual Nozzle/Bed Preheating ***
M140 S{material_bed_temperature} ; start preheating the bed WITHOUT wait to what is set in Cura
M104 S{material_print_temperature} T0 ; start preheating hotend WITHOUT wait to what is set in Cura
;-------------------------------------------------

;------------------------------------------
;*** Auto Bed Level ***
M280 P0 S160 ; BLTouch alarm release
G4 P100 ; delay for BLTouch
G28 ; home
G29 ; auto bed leveling
;------------------------------------------

M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

G92 E0 ;Reset Extruder
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
G1 X10.1 Y20 Z0.2 F5000.0 ; Move to start position

M190 S{material_bed_temperature} ; start heating the bed to what is set in Cura and WAIT
M109 S{material_print_temperature} T0 ; start heating hotend to what is set in Cura and WAIT

G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up