(Numbers in {} refer to 2.0mm-pitch - vs. 2.54mm elsewhere)
- Roundness: 1000 µ
- Width: 1500 {1200} µ
- Height: 1500 {1200} µ
- Drill: 1020 {800} µ
- X-off (V): 0 µ
- X-off (H): -2845 {-2000}
- Y-offset: (see below)
- H tail outline: X=-2255, Y=?, W=1820, H=640, R=100, SW=50
X={-1500}, Y=?, W={1000}, H={510}, R=100, SW=50 - H pin outline: X=4345, Y=?, W=6000, H=640, R=300, SW=50
X={2950}, Y=?, W={3900}, H={510}, R=300, SW=50
- Roundness: 100 µ
- Height: 1020 {850} µ
- Width (V): 2500 {2350} µ
- Width (H,M): 3300 {} µ
- Width (H,F): 2500 {} µ
- X-off (V): 1285 {1175} µ (half pad width)
- X-off (H): 4300 µ (Originally: ((2540/2) + ((4570-2540) / 2) + 2540) )
{} - [half border width, diff btw full tail length & length of tail NOT touching board, plus the tail-not-touching length]
- Y-offset: (see below)
Y-Offset:
- Initial = 1270 {1000} µ, plus 2540 {2000} µ for each pin
-
- 1270 {1000}, 3810 {3000}, 6350 {5000},
-
- 8890 {7000}, 11430 {9000}, 13970 {11000},
-
- 16510 {13000}, 19050 {15000}, 21590 {17000},
-
- 24130 {19000}, ...
- Width (V): 2575 µ (2.50 ± 0.10 - (0.050 / 2))
[0.10 = tolerance, 0.050 = stroke width]
{2000} - Width (H): 2540 {2000} µ
- Height (V): 2.54 × PinCount ± 0.40 - (0.050 / 2)
[0.40 = tolerance, 0.050 = stroke width]
{2.00 × PinCount} - Height (H): 2.54 × PinCount {2.00 × PinCount}
- Roundness: 100 µ
- Stroke: 50 µ
Heights:
- 6 = H: 15615 {}; V: 15240 {12000}
- THT, Vertical, Male/Female (0.1")
- SMT, Vertical, Male/Female (Type A/R1) (0.1")
- SMT, Vertical, Male/Female (Type B/R2) (0.1")
- SMT, Horizontal, Male (0.1")
- SMT, Horizontal, Female (0.1")
- THT, Horizontal, Male (0.1")
- THT, Horizontal, Female (0.1")
Component Name [Text] & Description [MD]
Header (1x6) (0.1" & 2.00mm; Various styles)
6-pin 0.1"- (2.54mm) or 2.00mm-pitch header, single-row. THT/SMT, vertical/horizontal, male/female footprints all available as options.
Different manufacturers produce very slightly varying products, so I've tried to keep these footprints fairly tolerant while not consuming too much excess board space. In particular, the heights of pins and female shrouds varies a lot, so bear that in mind if using horizontal footprints.
[See here for reference documents](https://gist.github.com/aziraphale/95e6938d9ba591b087959f628d47bdff) - the manufacturer-supplied drawings, etc., that I used to source dimensions. I then verified these, where possible, by measuring dimensions of various styles of header that I have in my toolkit.
Here is a list of all of the references (drawings, specification documents, datasheets, etc.) that I used when creating my "Header" component for the PCB designer on 123D Circuits - my header component differing from most in that it has PCB footprints available for a range of different header types, including THT/SMD, male/female, and vertical/horizontal. I've linked to the 1x6 version, but I plan to create components for other pin counts.
- THT, Horizontal, Female
- SMD, Horizontal, Female
- SMD, Horizontal, Female
- SMD, Horizontal, Male
- THT, Horizontal, Male
- SMD, Vertical, Male
- SMD, Vertical, Male
- THT, Vertical, Male
- THT, Vertical, Male
- THT, Vertical, Female
- Various
- THT, Vertical, Male, Double-Row
- THT, Vertical, Female, Double-Row
- THT, Horizontal, Male, Double-Row