digimoneyd

digimoneyd

Digimoney version v1.0.0.3-60010-dgm1

Usage:
  digimoneyd [options]                     
  digimoneyd [options] <command> [params]  Send command to -server or digimoneyd
  digimoneyd [options] help                List commands
  digimoneyd [options] help <command>      Get help for a command

#### Options:

  - ?
    This help message

  - conf=<file>
    Specify configuration file (default: digimoney.conf)

  - pid=<file>
    Specify pid file (default: digimoneyd.pid)

  - datadir=<dir>
    Specify data directory
  
  - wallet=<dir>          Specify wallet file (within data directory)
  - dbcache=<n>           Set database cache size in megabytes (default: 10)
  - dbwalletcache=<n>     Set wallet database cache size in megabytes (default: 1)
  - dblogsize=<n>         Set database disk log size in megabytes (default: 100)
  - timeout=<n>           Specify connection timeout in milliseconds (default: 5000)
  - proxy=<ip:port>       Connect through SOCKS5 proxy
  - tor=<ip:port>         Use proxy to reach tor hidden services (default: same as -proxy)
  - dns                   Allow DNS lookups for -addnode, -seednode and -connect
  - port=<port>           Listen for connections on <port> (default: 33290)
  - maxconnections=<n>    Maintain at most <n> connections to peers (default: 125)
  - addnode=<ip>          Add a node to connect to and attempt to keep the connection open
  - connect=<ip>          Connect only to the specified node(s)
  - seednode=<ip>         Connect to a node to retrieve peer addresses, and disconnect
  - externalip=<ip>       Specify your own public address
  - onlynet=<net>         Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
  - discover              Discover own IP address (default: 1 when listening and no -externalip)
  - irc                   Find peers using internet relay chat (default: 0)
  - listen                Accept connections from outside (default: 1 if no -proxy or -connect)
  - bind=<addr>           Bind to given address. Use [host]:port notation for IPv6
  - dnsseed               Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
  - forcednsseed          Always query for peer addresses via DNS lookup (default: 0)
  - synctime              Sync time with other nodes. Disable if time on your system is precise e.g. syncing with NTP (default: 1)
  - banscore=<n>          Threshold for disconnecting misbehaving peers (default: 100)
  - bantime=<n>           Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
  - maxreceivebuffer=<n>  Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
  - maxsendbuffer=<n>     Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
  - upnp                  Use UPnP to map the listening port (default: 0)
  - paytxfee=<amt>        Fee per KB to add to transactions you send
  - mininput=<amt>        When creating transactions, ignore inputs with value less than this (default: 0.01)
  - testnet               Use the test network
  - debug=<category>      Output debugging information (default: 0, supplying <category> is optional)
    If <category> is not supplied, output all debugging information.
    <category> can be: addrman, alert, db, lock, rand, rpc, selectcoins, mempool, net, coinage, coinstake, creation, stakemodifier.
  - logtimestamps         Prepend debug output with timestamp
  - shrinkdebugfile       Shrink debug.log file on client startup (default: 1 when no -debug)
  - printtoconsole        Send trace/debug info to console instead of debug.log file
  - regtest               Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
  - rpcuser=<user>        Username for JSON-RPC connections
  - rpcpassword=<pw>      Password for JSON-RPC connections
  - rpcport=<port>        Listen for JSON-RPC connections on <port> (default: 33291)
  - rpcallowip=<ip>       Allow JSON-RPC connections from specified IP address
  - rpcconnect=<ip>       Send commands to node running on <ip> (default: 127.0.0.1)
  - rpcwait               Wait for RPC server to start
  - rpcthreads=<n>        Set the number of threads to service RPC calls (default: 4)
  - blocknotify=<cmd>     Execute command when the best block changes (%s in cmd is replaced by block hash)
  - walletnotify=<cmd>    Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
  - confchange            Require a confirmations for change (default: 0)
  - alertnotify=<cmd>     Execute command when a relevant alert is received (%s in cmd is replaced by message)
  - upgradewallet         Upgrade wallet to latest format
  - createwalletbackups=<n> Number of automatic wallet backups (default: 10)
  - keypool=<n>           Set key pool size to <n> (default: 100) (litemode: 10)
  - rescan                Rescan the block chain for missing wallet transactions
  - salvagewallet         Attempt to recover private keys from a corrupt wallet.dat
  - checkblocks=<n>       How many blocks to check at startup (default: 500, 0 = all)
  - checklevel=<n>        How thorough the block verification is (0-6, default: 1)
  - loadblock=<file>      Imports blocks from external blk000?.dat file
  - maxorphanblocks=<n>   Keep at most <n> unconnectable blocks in memory (default: 750)

#### Block creation options:
  - blockminsize=<n>      Set minimum block size in bytes (default: 0)
  - blockmaxsize=<n>      Set maximum block size in bytes (default: 250000)
  - blockprioritysize=<n> Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)

#### SSL options: (see the Bitcoin Wiki for SSL setup instructions)
  - rpcssl                                  Use OpenSSL (https) for JSON-RPC connections
  - rpcsslcertificatechainfile=<file.cert>  Server certificate file (default: server.cert)
  - rpcsslprivatekeyfile=<file.pem>         Server private key (default: server.pem)
  - rpcsslciphers=<ciphers>                 Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv3:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
  - litemode=<n>          Disable all Darksend and Stealth Messaging related functionality (0-1, default: 0)

#### Masternode options:
  - masternode=<n>            Enable the client to act as a masternode (0-1, default: 0)
  - mnconf=<file>             Specify masternode configuration file (default: masternode.conf)
  - mnconflock=<n>            Lock masternodes from masternode configuration file (default: 1)
  - masternodeprivkey=<n>     Set the masternode private key
  - masternodeaddr=<n>        Set external address:port to get to this masternode (example: address:port)
  - masternodeminprotocol=<n> Ignore masternodes less than version (example: 61401; default : 0)

#### Darksend options:
  - enabledarksend=<n>          Enable use of automated darksend for funds stored in this wallet (0-1, default: 0)
  - darksendrounds=<n>          Use N separate masternodes to anonymize funds  (2-8, default: 2)
  - anonymizedigimoneyamount=<n> Keep N Digimoney anonymized (default: 0)
  - liquidityprovider=<n>       Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees)

#### InstantX options:
  - enableinstantx=<n>    Enable instantx, show confirmations for locked transactions (bool, default: true)
  - instantxdepth=<n>     Show N confirmations for a successfully locked transaction (0-9999, default: 10)

#### Secure messaging options:
  - nosmsg                                  Disable secure messaging.
  - debugsmsg                               Log extra debug messages.
  - smsgscanchain                           Scan the block chain for public key addresses on startup.


digimoneyd [options] <command> [params]
>>>
addmultisigaddress nrequired ["key",...] ( "account" )

addnode <node> <add|remove|onetry>

addredeemscript <redeemScript> [account]

backupwallet "destination"

checkkernel [{"txid":txid,"vout":n},...] [createblocktemplate=false]

checkwallet

clearbanned

createmultisig nrequired ["key",...]

createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}

darksend <digimoneyaddress> <amount>

decoderawtransaction <hex string>

decodescript <hex string>

dumpprivkey <digimoneyaddress>

dumpwallet <filename>

encryptwallet "passphrase"

getaccount "digimoneyaddress"

getaccountaddress "account"

getaddednodeinfo <dns> [node]

getaddressesbyaccount "account"

getbalance ( "account" minconf includeWatchonly )

getbestblockhash

getblock <hash> [txinfo]

getblockbynumber <number> [txinfo]

getblockcount

getblockhash <index>

getblocktemplate [params]

getcheckpoint

getconnectioncount

getdifficulty

getinfo

getmininginfo

getnettotals

getnewaddress ( "account" )

getnewpubkey [account]

getnewstealthaddress [label]

getpeerinfo

getrawmempool

getrawtransaction <txid> [verbose=0]

getreceivedbyaccount "account" ( minconf )

getreceivedbyaddress "digimoneyaddress" ( minconf )

getstakesubsidy <hex string>

getstakinginfo

getsubsidy [nTarget]

gettransaction "txid" ( includeWatchonly )

getwork [data]

getworkex [data, coinbase]

help [command]

importaddress "address" ( "label" rescan )

importprivkey <digimoneyprivkey> [label] [rescan=true]

importstealthaddress <scan_secret> <spend_secret> [label]

importwallet <filename>

keypoolrefill ( newsize )

listaccounts ( minconf includeWatchonly)

listaddressgroupings

listbanned

listreceivedbyaccount ( minconf includeempty includeWatchonly)

listreceivedbyaddress ( minconf includeempty includeWatchonly)

listsinceblock ( "blockhash" target-confirmations includeWatchonly)

liststealthaddresses [show_secrets=0]

listtransactions ( "account" count from includeWatchonly)

listunspent [minconf=1] [maxconf=9999999]  ["address",...]

makekeypair [prefix]

masternode "command"... ( "passphrase" )

masternodelist ( "mode" "filter" )

move "fromaccount" "toaccount" amount ( minconf "comment" )

ping

repairwallet

resendtx

reservebalance [<reserve> [amount]]

scanforalltxns [fromHeight]

scanforstealthtxns [fromHeight]

searchrawtransactions <address> [verbose=1] [skip=0] [count=100]

sendalert <message> <privatekey> <minver> <maxver> <priority> <id> [cancelupto]

sendfrom "fromaccount" "todigimoneyaddress" amount ( minconf "comment" "comment-to" )

sendmany "fromaccount" {"address":amount,...} ( minconf "comment" )

sendrawtransaction <hex string>

sendtoaddress "digimoneyaddress" amount ( "comment" "comment-to" )

sendtostealthaddress <stealth_address> <amount> [comment] [comment-to] [narration]

setaccount "digimoneyaddress" "account"

setban "ip(/netmask)" "add|remove" (bantime) (absolute)

settxfee amount

signmessage "digimoneyaddress" "message"

signrawtransaction <hex string> [{"txid":txid,"vout":n,"scriptPubKey":hex,"redeemScript":hex},...] [<privatekey1>,...] [sighashtype="ALL"]

smsgaddkey <address> <pubkey>

smsgbuckets [stats|dump]

smsgdisable 

smsgenable 

smsggetpubkey <address>

smsginbox [all|unread|clear]

smsglocalkeys [whitelist|all|wallet|recv <+/-> <address>|anon <+/-> <address>]

smsgoptions [list|set <optname> <value>]

smsgoutbox [all|clear]

smsgscanbuckets 

smsgscanchain 

smsgsend <addrFrom> <addrTo> <message>

smsgsendanon <addrTo> <message>

spork <name> [<value>]

stop

submitblock <hex data> [optional-params-obj]

validateaddress <digimoneyaddress>

validatepubkey <digimoneypubkey>

verifymessage <digimoneyaddress> <signature> <message>