bakirillov/references.txt

## references.txt
1. Fleming PA, Argraves WS, Gentile C, et  al.,  2010,  Fusion of Uniluminal Vascular Spheroids: A Model for Assembly of  Blood Vessels.  Dev  Dyn,  239:398–406.  DOI:  10.1002/dvdy.22161.
2. Inamori M, Hiroshi M, Toshihisa K, 2009, An Approach for Formation of Vascularized Liver Tissue by Endothelial Cell-covered Hepatocyte Spheroid Integration. Tissue Eng Part A, 15:2029–2037. DOI: 10.1089/ten.tea.2008.0403.3.  Rouwkema J, Khademhosseini A, 2016, Vascularization and  Angiogenesis in Tissue Engineering: Beyond Creating Static Networks.  Trends  Biotechnol,  34:733–45.  DOI:  10.1016/j.tibtech.2016.03.002.
4. Hoch E, Tovar GE, Borchers K, 2014, Bioprinting of Artificial Blood Vessels: Current Approaches Towards a Demanding Goal. Eur  J  Cardiothorac  Surg, 46:767–78. DOI: 10.1093/ejcts/ezu242.
5. Alonzo M, AnilKumar S, Roman B, et al.,  2019,  3D Bioprinting of Cardiac Tissue and Cardiac Stem Cell Therapy. Transl Res, 211:64–83. DOI: 10.1016/j.trsl.2019.04.004.
6. Lee W, Debasitis JC, Lee VK, et  al,. 2009, Multi-layered Culture of Human Skin Fibroblasts and Keratinocytes Through Three-dimensional Freeform Fabrication. Biomaterials, 30:1587–95. DOI: 10.1016/j.biomaterials.2008.12.009.
7. Vijayavenkataraman S, Lu WF, Fuh JY. 2016, 3D Bioprinting of Skin: A State-of-the-art Review on Modelling, Materials, and Processes. Biofabrication, 8:032001. DOI: 10.1088/1758-5090/8/3/032001.
8. Midha  S,  Patra  P,  Mohanty  S,  2019,  Advances  in  3D Bioprinting of Bone: Progress and Challenges. J Tissue Eng Regen Med, 13:925–45. DOI: 10.1002/term.2847.
9. Adepu S, Dhiman N, Laha A, et al., 2017, Three-dimensional Bioprinting for Bone Tissue Regeneration. Curr Opin Biomed Eng, 42:22–8. DOI: 10.1016/j.cobme.2017.03.005.
10. Bulanova  EA,  Koudan  EV,  Degosserie  J,  et al.,  2017, Bioprinting  of  a  Functional  Vascularized  Mouse  Thyroid Gland  Construct.  Biofabrication,  9:034105.  DOI: International Journal of Bioprinting (2020)–Volume 6, Issue 3  57 10.1088/1758-5090/aa7fdd.
11. Ma X, Liu J, Zhu W, et al., 2018, 3D Bioprinting of Functional Tissue Models for Personalized Drug Screening and In Vitro Disease  Modeling.  Adv  Drug  Deliv  Rev, 132:235–51. DOI: 10.1016/j.addr.2018.06.011.
12. Peng W, Unutmaz D, Ozbolat IT, 2016, Bioprinting Towards Physiologically  Relevant  Tissue  Models  for  Pharmaceutics. Trends Biotechnol,  34:722–32.  DOI:  10.1016/j.tibtech.2016.05.013.
13. Peng  W,  Datta  P,  Ayan  B,  et  al., 2017, 3D Bioprinting for Drug  Discovery  and  Development  in  Pharmaceutics.  Acta Biomater, 57:26–46. DOI: 10.1016/j.actbio.2017.05.025
14. Knowlton S, Onal S, Yu CH, et  al.,  2015,  Bioprinting  for  Cancer Research. Trends Biotechnol, 33:504–13.
15. King  SM,  Presnell  SC,  Nguyen  DG,  et al., 2013, Development of 3D Bioprinted Human Breast Cancer for In  Vitro  Screening  of Therapeutics Targeted Against  Cancer  Progression. American Soceity of Biology, New Orleans, LA. DOI: 10.1158/1538-7445.am2014-2034.
16. Knowlton  S,  Joshi A,  Yenilmez  B,  et  al.,  2016, Advancing Cancer Research Using Bioprinting for Tumor-on-a-chip  Platforms.  Int  J  Bioprinting,  2:3–8.  DOI:  10.18063/ijb.2016.02.003
17. Larsen M, Mishra R, Miller M., et al., 2015, Bioprinting of Bone.  In:  Essentials  of  3D  Biofabrication  and  Translation.  Academic Press, Cambridge, Massachusetts. pp. 293–308. doi.org/10.1016/b978-0-12-800972-7.00017-7.
18. Duan B, 2017, State-of-the-art Review of 3D Bioprinting for  Cardiovascular  Tissue  Engineering.  Ann  Biomed  Eng, 45:195–209. DOI:10.1007/s10439-016-1607-5.
19. Gao Q, Liu Z, Lin Z, et al., 2017, 3D Bioprinting of Vessel-like Structures  with  Multilevel  Fluidic  Channels.  ACS  Biomater  Sci Eng, 3:399–408. DOI: 10.1021/acsbiomaterials.6b00643.
20. Moldovan L, Babbey CM, Murphy MP, et al.,  2017, Comparison of Biomaterial-dependent and-Independent Bioprinting Methods for Cardiovascular Medicine. Curr Opin Biomed Eng, 2:124–31. DOI: 10.1016/j.cobme.2017.05.009
21. Beyersdorf  F,  2014,  Three-dimensional  Bioprinting:  New  Horizon for Cardiac Surgery. 46:339–41.
22. Pourchet LJ, Thepot A, Albouy M, et al., 2017, Human Skin 3D  Bioprinting  Using  Scaffold-free Approach.  Adv  Healthc  Mater, 6:1601101. DOI: 10.1002/adhm.201601101.
23.  Murphy SV, Atala A, 2014, 3D Bioprinting of Tissues and Organs. Nat Biotechnol, 32:773–5. DOI: 10.1038/nbt.2958.
24. Müller M, Öztürk E, Arlov Ø, et al., 2017, Alginate Sulfate-nanocellulose Bioinks for Cartilage Bioprinting Applications. Ann  Biomed  Eng,  45:210–23.  DOI:  10.1007/s10439-016-1704-5.
25.  Mouser  VH,  Melchels  FP,  Visser  J,  et al., 2016,  Yield Stress  Determines  Bioprintability  of  Hydrogels  Based on  Gelatin-methacryloyl  and  Gellan  Gum  for  Cartilage Bioprinting.  Biofabrication, 8:035003. DOI: 10.1088/1758-5090/8/3/035003.
26. Di Bella C, Fosang A, Donati DM, et al., 2015, 3D Bioprinting of  Cartilage  for  Orthopedic  Surgeons:  Reading  between  the  Lines. Front Surg, 2:39. DOI: 10.3389/fsurg.2015.00039.
	1. Fleming PA, Argraves WS, Gentile C, et al., 2010, Fusion of Uniluminal Vascular Spheroids: A Model for Assembly of Blood Vessels. Dev Dyn, 239:398–406. DOI: 10.1002/dvdy.22161.
	2. Inamori M, Hiroshi M, Toshihisa K, 2009, An Approach for Formation of Vascularized Liver Tissue by Endothelial Cell-covered Hepatocyte Spheroid Integration. Tissue Eng Part A, 15:2029–2037. DOI: 10.1089/ten.tea.2008.0403.3. Rouwkema J, Khademhosseini A, 2016, Vascularization and Angiogenesis in Tissue Engineering: Beyond Creating Static Networks. Trends Biotechnol, 34:733–45. DOI: 10.1016/j.tibtech.2016.03.002.
	4. Hoch E, Tovar GE, Borchers K, 2014, Bioprinting of Artificial Blood Vessels: Current Approaches Towards a Demanding Goal. Eur J Cardiothorac Surg, 46:767–78. DOI: 10.1093/ejcts/ezu242.
	5. Alonzo M, AnilKumar S, Roman B, et al., 2019, 3D Bioprinting of Cardiac Tissue and Cardiac Stem Cell Therapy. Transl Res, 211:64–83. DOI: 10.1016/j.trsl.2019.04.004.
	6. Lee W, Debasitis JC, Lee VK, et al,. 2009, Multi-layered Culture of Human Skin Fibroblasts and Keratinocytes Through Three-dimensional Freeform Fabrication. Biomaterials, 30:1587–95. DOI: 10.1016/j.biomaterials.2008.12.009.
	7. Vijayavenkataraman S, Lu WF, Fuh JY. 2016, 3D Bioprinting of Skin: A State-of-the-art Review on Modelling, Materials, and Processes. Biofabrication, 8:032001. DOI: 10.1088/1758-5090/8/3/032001.
	8. Midha S, Patra P, Mohanty S, 2019, Advances in 3D Bioprinting of Bone: Progress and Challenges. J Tissue Eng Regen Med, 13:925–45. DOI: 10.1002/term.2847.
	9. Adepu S, Dhiman N, Laha A, et al., 2017, Three-dimensional Bioprinting for Bone Tissue Regeneration. Curr Opin Biomed Eng, 42:22–8. DOI: 10.1016/j.cobme.2017.03.005.
	10. Bulanova EA, Koudan EV, Degosserie J, et al., 2017, Bioprinting of a Functional Vascularized Mouse Thyroid Gland Construct. Biofabrication, 9:034105. DOI: International Journal of Bioprinting (2020)–Volume 6, Issue 3 57 10.1088/1758-5090/aa7fdd.
	11. Ma X, Liu J, Zhu W, et al., 2018, 3D Bioprinting of Functional Tissue Models for Personalized Drug Screening and In Vitro Disease Modeling. Adv Drug Deliv Rev, 132:235–51. DOI: 10.1016/j.addr.2018.06.011.
	12. Peng W, Unutmaz D, Ozbolat IT, 2016, Bioprinting Towards Physiologically Relevant Tissue Models for Pharmaceutics. Trends Biotechnol, 34:722–32. DOI: 10.1016/j.tibtech.2016.05.013.
	13. Peng W, Datta P, Ayan B, et al., 2017, 3D Bioprinting for Drug Discovery and Development in Pharmaceutics. Acta Biomater, 57:26–46. DOI: 10.1016/j.actbio.2017.05.025
	14. Knowlton S, Onal S, Yu CH, et al., 2015, Bioprinting for Cancer Research. Trends Biotechnol, 33:504–13.
	15. King SM, Presnell SC, Nguyen DG, et al., 2013, Development of 3D Bioprinted Human Breast Cancer for In Vitro Screening of Therapeutics Targeted Against Cancer Progression. American Soceity of Biology, New Orleans, LA. DOI: 10.1158/1538-7445.am2014-2034.
	16. Knowlton S, Joshi A, Yenilmez B, et al., 2016, Advancing Cancer Research Using Bioprinting for Tumor-on-a-chip Platforms. Int J Bioprinting, 2:3–8. DOI: 10.18063/ijb.2016.02.003
	17. Larsen M, Mishra R, Miller M., et al., 2015, Bioprinting of Bone. In: Essentials of 3D Biofabrication and Translation. Academic Press, Cambridge, Massachusetts. pp. 293–308. doi.org/10.1016/b978-0-12-800972-7.00017-7.
	18. Duan B, 2017, State-of-the-art Review of 3D Bioprinting for Cardiovascular Tissue Engineering. Ann Biomed Eng, 45:195–209. DOI:10.1007/s10439-016-1607-5.
	19. Gao Q, Liu Z, Lin Z, et al., 2017, 3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels. ACS Biomater Sci Eng, 3:399–408. DOI: 10.1021/acsbiomaterials.6b00643.
	20. Moldovan L, Babbey CM, Murphy MP, et al., 2017, Comparison of Biomaterial-dependent and-Independent Bioprinting Methods for Cardiovascular Medicine. Curr Opin Biomed Eng, 2:124–31. DOI: 10.1016/j.cobme.2017.05.009
	21. Beyersdorf F, 2014, Three-dimensional Bioprinting: New Horizon for Cardiac Surgery. 46:339–41.
	22. Pourchet LJ, Thepot A, Albouy M, et al., 2017, Human Skin 3D Bioprinting Using Scaffold-free Approach. Adv Healthc Mater, 6:1601101. DOI: 10.1002/adhm.201601101.
	23. Murphy SV, Atala A, 2014, 3D Bioprinting of Tissues and Organs. Nat Biotechnol, 32:773–5. DOI: 10.1038/nbt.2958.
	24. Müller M, Öztürk E, Arlov Ø, et al., 2017, Alginate Sulfate-nanocellulose Bioinks for Cartilage Bioprinting Applications. Ann Biomed Eng, 45:210–23. DOI: 10.1007/s10439-016-1704-5.
	25. Mouser VH, Melchels FP, Visser J, et al., 2016, Yield Stress Determines Bioprintability of Hydrogels Based on Gelatin-methacryloyl and Gellan Gum for Cartilage Bioprinting. Biofabrication, 8:035003. DOI: 10.1088/1758-5090/8/3/035003.
	26. Di Bella C, Fosang A, Donati DM, et al., 2015, 3D Bioprinting of Cartilage for Orthopedic Surgeons: Reading between the Lines. Front Surg, 2:39. DOI: 10.3389/fsurg.2015.00039.