Skip to content

Instantly share code, notes, and snippets.

@bakueikozo

bakueikozo/pce mini bootlog

Created March 19, 2020 04:16
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save bakueikozo/ab306b242098a7521dfb90d97c638960 to your computer and use it in GitHub Desktop.
Save bakueikozo/ab306b242098a7521dfb90d97c638960 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
pce mini bootlog
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.4.113 (root@1058e7ceca8f) (gcc version 4.9.3 (Buildroot 2016.05-git-gaf97a9710) ) #1 SMP PREEMPT Thu Sep 26 00:56:44 UTC 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] cma: CMA: reserved 40 MiB at 4d800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] free_area_init_node: node 0, pgdat c06c4040, node_mem_map c080a000
[ 0.000000] Normal zone: 576 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64960 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c0a5e000 s6592 r8192 d13888 u32768
[ 0.000000] pcpu-alloc: s6592 r8192 d13888 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64960
[ 0.000000] Kernel command line: boot_type=2 disp_para=100 fb_base=0x0 config_size=42480 boot.serialno=26d789046009fffff57c boot.hardware=sun8i console=ttyS0,115200 noinitrd root=/dev/mmcblk0p7 rootfstype=ext4 rootwait init=/sbin/init ion_cma_512m=40m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=8 partitions=boot-res@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:rootfs@mmcblk0p7:rootfs_data@mmcblk0p8:app@mmcblk0p9:misc@mmcblk0p10:UDISK@mmcblk0p1
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 256MB = 256MB total
[ 0.000000] Memory: 210092k/210092k available, 52052k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc062db34 (6295 kB)
[ 0.000000] .init : 0xc062e000 - 0xc065f9c0 ( 199 kB)
[ 0.000000] .data : 0xc0660000 - 0xc06c4e40 ( 404 kB)
[ 0.000000] .bss : 0xc06c6098 - 0xc08093f8 (1293 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:416
[ 0.000000] try to syncboot of clk ats
[ 0.000000] try to syncboot of clk sdmmc2mod
[ 0.000000] try to syncboot of clk uart0
[ 0.000000] try to syncboot of clk pll_ddr1
[ 0.000000] try to syncboot of clk debe0
[ 0.000000] try to syncboot of clk dma
[ 0.000000] try to syncboot of clk sat
[ 0.000000] try to syncboot of clk pio
[ 0.000000] try to syncboot of clk mbus
[ 0.000000] try to syncboot of clk drc0
[ 0.000000] try to syncboot of clk lcd0ch0
[ 0.000000] try to syncboot of clk axi
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000195] Calibrating delay loop (skipped), value calculated using timer frequency.. 14405.00 BogoMIPS (lpj=24000000)
[ 0.000215] pid_max: default: 4096 minimum: 301
[ 0.000368] Security Framework initialized
[ 0.000390] SELinux: Initializing.
[ 0.000435] SELinux: Starting in permissive mode
[ 0.000447] AppArmor: AppArmor disabled by boot time parameter
[ 0.000520] Mount-cache hash table entries: 512
[ 0.001258] CPU: Testing write buffer coherency: ok
[ 0.001458] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001469] [sunxi_smp_prepare_cpus] enter
[ 0.001503] Setting up static identity map for 0x404eb248 - 0x404eb2a0
[ 0.003333] CPU1: Booted secondary processor
[ 0.003333] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.003333] CPU2: Booted secondary processor
[ 0.003333] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.003333] CPU3: Booted secondary processor
[ 0.003333] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.043484] Brought up 4 CPUs
[ 0.043484] SMP: Total of 4 processors activated (57623.00 BogoMIPS).
[ 0.046921] devtmpfs: initialized
[ 0.052065] pinctrl core: initialized pinctrl subsystem
[ 0.052065] dummy:
[ 0.054108] NET: Registered protocol family 16
[ 0.062497] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.062564] script_sysfs_init success
[ 0.062593] sunxi_dump_init success
[ 0.062810] sunxi pinctrl probe enter
[ 0.063527] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.064658] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.064837] axp_pinctrl_probe enter...
[ 0.064983] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
[ 0.065003] mainkey total count : 80
[ 0.065012] mainkey name : product, pin count : 0
[ 0.065022] mainkey name : platform, pin count : 2
[ 0.065033] mainkey name : target, pin count : 0
[ 0.065042] mainkey name : power_sply, pin count : 0
[ 0.065051] mainkey name : key_detect_en, pin count : 0
[ 0.065060] mainkey name : fel_key, pin count : 1
[ 0.065070] mainkey name : gpiokey_para, pin count : 2
[ 0.065079] mainkey name : card_boot, pin count : 0
[ 0.065088] mainkey name : card0_boot_para, pin count : 6
[ 0.065099] mainkey name : card2_boot_para, pin count : 10
[ 0.065110] mainkey name : twi_para, pin count : 2
[ 0.065120] mainkey name : uart_para, pin count : 2
[ 0.065130] mainkey name : force_uart_para, pin count : 2
[ 0.065140] mainkey name : jtag_para, pin count : 4
[ 0.065149] mainkey name : clock, pin count : 0
[ 0.065159] mainkey name : pm_para, pin count : 0
[ 0.065169] mainkey name : dram_para, pin count : 0
[ 0.065178] mainkey name : pm_para, pin count : 0
[ 0.065187] mainkey name : wakeup_src_para, pin count : 1
[ 0.065196] mainkey name : twi0, pin count : 2
[ 0.065205] mainkey name : twi1, pin count : 2
[ 0.065214] mainkey name : twi2, pin count : 2
[ 0.065223] mainkey name : uart0, pin count : 2
[ 0.065232] mainkey name : uart1, pin count : 4
[ 0.065242] mainkey name : uart2, pin count : 2
[ 0.065251] mainkey name : uart3, pin count : 4
[ 0.065260] mainkey name : uart4, pin count : 4
[ 0.065269] mainkey name : spi0, pin count : 4
[ 0.065278] mainkey name : spi1, pin count : 4
[ 0.065288] mainkey name : spi_devices, pin count : 0
[ 0.065297] mainkey name : spi_board0, pin count : 0
[ 0.065306] mainkey name : ctp_para, pin count : 2
[ 0.065316] mainkey name : ctp_list_para, pin count : 0
[ 0.065325] mainkey name : tkey_para, pin count : 0
[ 0.065334] mainkey name : motor_para, pin count : 1
[ 0.065344] map mainkey [motor_para] to pinctrl, map number [2]
[ 0.065356] mainkey name : ths_para, pin count : 0
[ 0.065365] mainkey name : cooler_table, pin count : 0
[ 0.065374] mainkey name : nand0_para, pin count : 19
[ 0.065387] mainkey name : hdmi_ep952_para, pin count : 2
[ 0.065397] mainkey name : disp_init, pin count : 0
[ 0.065407] mainkey name : lcd0_para, pin count : 29
[ 0.065419] mainkey name : pwm0_para, pin count : 1
[ 0.065429] mainkey name : pwm1_para, pin count : 1
[ 0.065440] mainkey name : csi0, pin count : 14
[ 0.065451] mainkey name : led_para, pin count : 2
[ 0.065462] mainkey name : mmc0_para, pin count : 7
[ 0.065472] mainkey name : mmc1_para, pin count : 6
[ 0.065483] mainkey name : mmc2_para, pin count : 11
[ 0.065494] mainkey name : usbc0, pin count : 3
[ 0.065504] map mainkey [usbc0] to pinctrl, map number [2]
[ 0.065516] mainkey name : usbc1, pin count : 0
[ 0.065525] mainkey name : usb_feature, pin count : 0
[ 0.065535] mainkey name : msc_feature, pin count : 0
[ 0.065546] mainkey name : ma8601_para, pin count : 2
[ 0.065557] mainkey name : gsensor_para, pin count : 1
[ 0.065568] mainkey name : gsensor_list_para, pin count : 0
[ 0.065579] mainkey name : rf_para, pin count : 0
[ 0.065588] mainkey name : wifi_para, pin count : 2
[ 0.065598] mainkey name : bt_para, pin count : 3
[ 0.065608] mainkey name : gps_para, pin count : 2
[ 0.065617] mainkey name : 3g_para, pin count : 4
[ 0.065627] mainkey name : gy_para, pin count : 0
[ 0.065637] mainkey name : gy_list_para, pin count : 0
[ 0.065646] mainkey name : ls_para, pin count : 1
[ 0.065656] mainkey name : ls_list_para, pin count : 0
[ 0.065666] mainkey name : compass_para, pin count : 0
[ 0.065675] mainkey name : i2s0, pin count : 3
[ 0.065685] mainkey name : i2s1, pin count : 4
[ 0.065694] mainkey name : audio0, pin count : 0
[ 0.065704] mainkey name : pmu1_para, pin count : 0
[ 0.065713] mainkey name : pmu2_para, pin count : 0
[ 0.065722] mainkey name : dvfs_table, pin count : 0
[ 0.065732] mainkey name : Vdevice, pin count : 2
[ 0.065742] mainkey name : s_uart0, pin count : 2
[ 0.065752] mainkey name : s_rsb0, pin count : 2
[ 0.065761] mainkey name : s_jtag0, pin count : 4
[ 0.065771] mainkey name : s_powchk, pin count : 0
[ 0.065781] mainkey name : mali_para, pin count : 0
[ 0.065790] mainkey name : dram_dvfs_table, pin count : 0
[ 0.065800] mainkey name : charging_type, pin count : 0
[ 0.065810] mainkey name : dram_scene_table, pin count : 0
[ 0.065818] axp pinctrl driver probe ok
[ 0.066760] sunxi_dev_init 453 gpio_buttons_data.nbuttons=2
[ 0.066775] sunxi_dev_init 479 gpio_buttons[i].gpio=359 gpio_buttons[i].code=116
[ 0.066789] sunxi_dev_init 479 gpio_buttons[i].gpio=356 gpio_buttons[i].code=102
[ 0.067094] [sunxi-module]: [sunxi-module.0] probe success
[ 0.067132] script config pll3 to 297 Mhz
[ 0.067146] script config pll4 to 300 Mhz
[ 0.067176] script config pll6 to 600 Mhz
[ 0.067188] script config pll8 to 384 Mhz
[ 0.067208] script config pll9 to 480 Mhz
[ 0.067220] script config pll10 to 297 Mhz
[ 0.067228] sunxi_default_clk_init
[ 0.067235] try to set pll6ahb1 to 200000000
[ 0.067284] try to set ahb clk source to pll6ahb1
[ 0.067293] set ahb clk source to pll6ahb1
[ 0.067302] try to set ahb1 to 200000000
[ 0.067312] try to set apb1 to 100000000
[ 0.073501] bio: create slab <bio-0> at 0
[ 0.076759] [ARISC] :sunxi-arisc driver v1.60
[ 0.110177] [ARISC] :arisc version: [v0.0.23.1]
[ 0.110189] [sunxi-module]: arisc register success
[ 0.325293] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[ 0.327101] SCSI subsystem initialized
[ 0.327229] usbcore: registered new interface driver usbfs
[ 0.327296] usbcore: registered new interface driver hub
[ 0.330036] usbcore: registered new device driver usb
[ 0.330150] twi_chan_cfg()350 - [twi0] has no twi_regulator.
[ 0.330165] twi_chan_cfg()350 - [twi1] has no twi_regulator.
[ 0.330178] twi_chan_cfg()350 - [twi2] has no twi_regulator.
[ 0.331017] Linux video capture interface: v2.00
[ 0.330030] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
[ 0.333720] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV
[ 0.333720] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV
[ 0.333720] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV
[ 0.333720] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV
[ 0.333720] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV
[ 0.333720] axp22_rtc: 3000 mV
[ 0.333720] axp22_aldo1: 700 <--> 3300 mV at 3000 mV
[ 0.333720] axp22_aldo2: 700 <--> 3300 mV at 2500 mV
[ 0.333720] axp22_aldo3: 700 <--> 3300 mV at 3000 mV
[ 0.333720] axp22_dldo1: 700 <--> 3300 mV at 3300 mV
[ 0.333720] axp22_dldo2: 700 <--> 3300 mV at 700 mV
[ 0.336814] axp22_dldo3: 700 <--> 3300 mV at 700 mV
[ 0.336863] axp22_dldo4: 700 <--> 3300 mV at 700 mV
[ 0.336863] axp22_eldo1: 700 <--> 3300 mV at 3000 mV
[ 0.336863] axp22_eldo1: supplied by axp22_dcdc1
[ 0.336909] axp22_eldo2: 700 <--> 3300 mV at 1800 mV
[ 0.336909] axp22_eldo2: supplied by axp22_dcdc1
[ 0.336913] axp22_eldo3: 700 <--> 3300 mV at 700 mV
[ 0.336913] axp22_eldo3: supplied by axp22_dcdc1
[ 0.336913] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV
[ 0.336913] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV
[ 0.336913] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV
[ 0.336913] axp22_dc1sw: at 700 mV
[ 0.336913] axp22_dc1sw: supplied by axp22_dcdc1
[ 0.337046] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
[ 0.340651] now_rest_vol = 0
[ 0.343356] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.344398] Switching to clocksource arch_sys_counter
[ 0.344714] FS-Cache: Loaded
[ 0.344768] CacheFiles: Loaded
[ 0.344768] [DISP]disp_module_init
[ 0.344768] [DISP]disp_probe
[ 0.344768] disp_init_lcd==============
[ 0.344768] [DISP] OSAL_Pwm_request,line:12: OSAL_Pwm_request pwm 1 fail!
[ 0.353398] lcd_clk_config111 ======lcd ddddclk = 74250000
[ 0.353409] lcd_clk_config222 ======lcd ddddclk = 74250000
[ 0.353420] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
[ 0.353430] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
[ 0.353805] [DISP] OSAL_Pwm_Set_Polarity,line:95: OSAL_Pwm_Set_Polarity, handle is NULL!
[ 0.353820] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 0.353951] start_work================111
[ 0.353967] [DISP]Fb_Init
[ 0.354036] [DISP] parser_disp_init_para,line:130: fetch script data disp_init.screen2_output_type fail
[ 0.354053] [DISP] parser_disp_init_para,line:147: fetch script data disp_init.screen2_output_mode fail
[ 0.354078] [DISP] parser_disp_init_para,line:208: fetch script data disp_init.fb2_format fail
[ 0.354093] [DISP] parser_disp_init_para,line:213: fetch script data disp_init.fb2_scaler_mode_enable fail
[ 0.354109] [DISP] parser_disp_init_para,line:218: fetch script data disp_init.fb2_width fail
[ 0.354124] [DISP] parser_disp_init_para,line:223: fetch script data disp_init.fb2_height fail
[ 0.362734] [DISP]disp_probe finish
[ 0.362812] [DISP]capture_module_init
[ 0.363114] [DISP]capture_probe
[ 0.363143] [DISP]capture finish
[ 0.363152] [DISP]disp_module_init finish
[ 0.363161] [LCD]lcd_module_init
[ 0.363310] LCD_set_panel_funs: ====
[ 0.363327] disp_lcd_get_driver_name, EP952
[ 0.363355] gdisp.init_para.start_process
[ 0.363377] start_work================111
[ 0.363385] extern hdmi type...
[ 0.363400] disp_lcd_get_driver_name, EP952
[ 0.363408] gdisp.init_para.start_process
[ 0.363422] start_work================111
[ 0.363429] extern hdmi type...
[ 0.363442] disp_lcd_get_driver_name, EP952
[ 0.363450] gdisp.init_para.start_process
[ 0.363463] start_work================111
[ 0.363470] extern hdmi type...
[ 0.363483] disp_lcd_get_driver_name, EP952
[ 0.363490] gdisp.init_para.start_process
[ 0.363504] start_work================111
[ 0.363511] extern hdmi type...
[ 0.363523] disp_lcd_get_driver_name, EP952
[ 0.363531] gdisp.init_para.start_process
[ 0.363544] start_work================111
[ 0.363551] extern hdmi type...
[ 0.363564] disp_lcd_get_driver_name, EP952
[ 0.363571] gdisp.init_para.start_process
[ 0.363585] start_work================111
[ 0.363592] extern hdmi type...
[ 0.363605] disp_lcd_get_driver_name, EP952
[ 0.363612] gdisp.init_para.start_process
[ 0.363626] start_work================111
[ 0.363633] extern hdmi type...
[ 0.363646] disp_lcd_get_driver_name, EP952
[ 0.363654] set ep952 lcd
[ 0.363660] gdisp.init_para.start_process
[ 0.363673] start_work================111
[ 0.363680] extern hdmi type...
[ 0.363692] [LCD]lcd_module_init finish
[ 0.363700] [HDMI]ep952_module_init begin
[ 0.363709] hdmi used.
[ 0.363718] ddc i2c id = 0
[ 0.363764] ddc_i2c_detect=============
[ 0.363772] [DDC_I2C] ddc_i2c_detect, get right i2c adapter, id=0
[ 0.363889] ddc_i2c_detect=============
[ 0.363897] [ERR]:ddc_i2c_detect err.
[ 0.363907] ddc_i2c_detect=============
[ 0.363915] [ERR]:ddc_i2c_detect err.
[ 0.363926] hdmi i2c id = 2
[ 0.363965] hdmi_i2c_detect=============
[ 0.363974] err.
[ 0.363981] hdmi_i2c_detect=============
[ 0.363988] err.
[ 0.363996] hdmi_i2c_detect=============
[ 0.364003] hdmi_i2c_detect==111111===========
[ 0.364013] [DISP_I2C] hdmi_i2c_detect, get right i2c adapter, id=2, i2c adapter=cd126010
[ 0.364123] hdmi_i2c_probe:547
[ 0.364131] hdmi_i2c_probe:575
[ 0.364138] hdmi_parse_config:111
[ 0.364145] hdmi_parse_config:120
[ 0.364154] gpio get success!
[ 0.364161] hdmi_parse_config:120
[ 0.364168] gpio get success!
[ 0.364175] hdmi_parse_config:136
[ 0.364184] EP952 Code Version : 52.1
[ 0.364191] hdmi_gpio_config:144
[ 0.364199] hdmi_gpio_config: gpio_info->mul_sel = 1
[ 0.376700] hdmi_gpio_config:144
[ 0.376709] hdmi_gpio_config: gpio_info->mul_sel = 1
[ 0.390025] hdmi_gpio_config:144
[ 0.390034] hdmi_gpio_config: gpio_info->mul_sel = 7
[ 0.404521] < EP952 Tx Power Down >
[ 0.406951] < EP952 Audio_Mute_enable >
[ 0.407564] < EP952 Video_Mute_enable >
[ 0.408177] User define - Disable HDCP function
[ 0.411484] gdisp.init_para.start_process
[ 0.411492] ep952_thread:306
[ 0.411512] start_work================111
[ 0.411519] extern hdmi type...
[ 0.411527] hdmi register
[ 0.411534] bsp_disp_ep952_set_mode: ====
[ 0.411543] ep952_set_mode: ====hdmi_mode = 5
[ 0.411551] ep952_set_mode: ====g_hdmi_vic = 4
[ 0.411561] disp_lcd_set_hdmi_mode...pixel_clk = 74250000drv_lcd_enable: ====
[ 0.411678] disp_lcd_pre_enable: ====
[ 0.411759] lcd_clk_config111 ======lcd ddddclk = 74250000
[ 0.411773] lcd_clk_config222 ======lcd ddddclk = 74250000
[ 0.411783] lcd_clk_config 111 ======lcd clk = 74250000, pll_clk = 74250000
[ 0.411794] lcd_clk_config 222 ======lcd clk = 74250000, pll_clk = 74250000
[ 0.412597] [LCD]open, step 0 finish
[ 0.422146] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[ 0.422161] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
[ 0.422174] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.422202] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[ 0.422214] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
[ 0.422226] [sunxi_hci_sunxi]: get usb_regulator is nocare
[ 0.422413] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
[ 0.422438] get usbc0(usb_restrict pin) failed
[ 0.422715] [sw_udc]: udc_init: version 20080411
[ 0.423106] [ddrfreq] dram_clk value is 600
[ 0.423116] [ddrfreq] sunxi_ddrfreq_max=600000
[ 0.423125] [ddrfreq] dram_type value is 3
[ 0.423134] [ddrfreq] dram_zq value is 0x3bbb
[ 0.423142] [ddrfreq] dram_odt_en value is 1
[ 0.423151] [ddrfreq] dram_para1 value is 0x10e20100
[ 0.423161] [ddrfreq] dram_para2 value is 0x0
[ 0.423170] [ddrfreq] dram_mr0 value is 0x1c70
[ 0.423179] [ddrfreq] dram_mr1 value is 0x40
[ 0.423188] [ddrfreq] dram_mr2 value is 0x18
[ 0.423197] [ddrfreq] dram_mr3 value is 0x0
[ 0.423206] [ddrfreq] dram_tpr0 value is 0x47a14f
[ 0.423215] [ddrfreq] dram_tpr1 value is 0x1c2294c
[ 0.423224] [ddrfreq] dram_tpr2 value is 0x69049
[ 0.423233] [ddrfreq] dram_tpr3 value is 0x0
[ 0.423242] [ddrfreq] dram_tpr4 value is 0x0
[ 0.423251] [ddrfreq] dram_tpr5 value is 0x0
[ 0.423260] [ddrfreq] dram_tpr6 value is 0x0
[ 0.423268] [ddrfreq] dram_tpr7 value is 0x0
[ 0.423277] [ddrfreq] dram_tpr8 value is 0x0
[ 0.423286] [ddrfreq] dram_tpr9 value is 0x0
[ 0.423295] [ddrfreq] dram_tpr10 value is 0x0
[ 0.423304] [ddrfreq] dram_tpr11 value is 0x0
[ 0.423313] [ddrfreq] dram_tpr12 value is 168
[ 0.423321] [ddrfreq] sunxi_ddrfreq_min=168000
[ 0.423330] [ddrfreq] dram_tpr13 value is 0x10901
[ 0.423503] [dsm] use sysconfig
[ 0.423513] [dsm] -----------Dram scene-freq Table------------
[ 0.423522] [dsm] scene = 0 frequency = 600000KHz
[ 0.423532] [dsm] scene = 1 frequency = 360000KHz
[ 0.423540] [dsm] scene = 2 frequency = 240000KHz
[ 0.423549] [dsm] scene = 3 frequency = 168000KHz
[ 0.423557] [dsm] --------------------------------------------
[ 0.423661] [ddrfreq] LV_count value is 3
[ 0.423682] [ddrfreq] ---------------Dram V-F Table---------------
[ 0.423692] [ddrfreq] voltage = 1100mv frequency = 552000KHz
[ 0.423702] [ddrfreq] voltage = 1100mv frequency = 360000KHz
[ 0.423711] [ddrfreq] voltage = 1100mv frequency = 0KHz
[ 0.423720] [ddrfreq] --------------------------------------------
[ 0.423853] [ddrfreq] last_vdd=1100
[ 0.423920] [ddrfreq] __sram_start: 0xc06c5000, __sram_end: 0xc06c6074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
[ 0.423932] [ddrfreq] sunxi dramfreq probe ok!
[ 0.424232] NET: Registered protocol family 2
[ 0.435736] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.436328] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.436464] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[ 0.436599] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.436610] TCP: reno registered
[ 0.436910] NET: Registered protocol family 1
[ 0.437307] RPC: Registered named UNIX socket transport module.
[ 0.437318] RPC: Registered udp transport module.
[ 0.437326] RPC: Registered tcp transport module.
[ 0.437334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.438074] [pm]aw_pm_init!
[ 0.438086] standby_mode = 1.
[ 0.438094] wakeup src cnt is : 1.
[ 0.438104] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[ 0.438115] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[ 0.438126] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[ 0.438138] sunxi_reg_init enter
[ 0.438778] audit: initializing netlink socket (disabled)
[ 0.438819] type=2000 audit(0.436:1): initialized
[ 0.440862] NTFS driver 2.1.30 [Flags: R/W].
[ 0.441048] fuse init (API version 7.18)
[ 0.441449] msgmni has been set to 490
[ 0.441489] SELinux: Registering netfilter hooks
[ 0.443010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.443026] io scheduler noop registered
[ 0.443035] io scheduler deadline registered
[ 0.443119] io scheduler cfq registered (default)
[ 0.443146] pwm module init!
[ 0.443742] sw_uart_get_devinfo()1428 - uart0 has no uart_regulator.
[ 0.443759] sw_uart_get_devinfo()1428 - uart1 has no uart_regulator.
[ 0.444143] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.444164] sw_console_setup()1188 - console setup baud 115200 parity n bits 8, flow n
[ 0.539958] [LCD]open, step 1 finish
[ 0.637402] console [ttyS0] enabled
[ 2.745148] [LCD]open, step 2 finish
[ 2.749517] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 2.750031] ep952_open:457
[ 2.750063] ep952_open:471
[ 2.750143] [LCD]open, step 3 finish
[ 2.750151] ep952_thread:306
[ 2.750830] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.756625] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 2.756637] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 2.756660] [DISP] OSAL_Pwm_Config,line:78: OSAL_Pwm_Config, handle is NULL!
[ 2.770702] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.790699] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.810698] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.830701] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.850725] EP952Controller_Task 292 ConnectionState:1, is_Connected: 0, is_Hot_Plug: 0 is_ReceiverSense: 1
[ 2.852625] loop: module loaded
[ 2.865174] #####################
[ 2.868884] # HDMI - Connect #
[ 2.872592] #####################
[ 2.872668] [NAND]panic_buff_handle 0xce308000 ,0x4e308000
[ 2.872684] [NAND][NAND]nand init start, nand0_used_flag is 0
[ 2.872691] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
[ 2.872701] regisger ISP =====================
[ 2.872732] [NAND]nand driver is disabled
[ 2.872852] get ma8601 reset gpio OK
[ 2.909703] #####################
[ 2.913394] # BEGIN EDID DUMP #
[ 2.917078] #####################
[ 2.944844] EDID block 0:
[ 2.947770] 00 ff ff ff ff ff ff 00 7f ff 01 00 e9 03 00 00 ................
[ 2.955707] 17 15 01 03 80 78 44 78 0a 19 90 a7 55 46 98 24 .....xDx....UF.$
[ 2.963653] 10 49 4b 21 09 00 8b c0 81 80 95 00 a9 40 01 01 .IK!.........@..
[ 2.971595] 01 01 01 01 01 01 7d 4b 80 a0 72 b0 2d 40 58 2c ......}K..r.-@X,
[ 2.979542] 45 00 30 1b 00 00 00 1e fa 1c 80 18 71 1c 16 20 E.0.........q..
[ 2.987483] 58 2c 25 00 c4 8e 21 00 00 9e 00 00 00 fc 00 48 X,%...!........H
[ 2.995430] 53 45 0a 20 20 20 20 20 20 20 20 20 00 00 00 fd SE. ....
[ 2.996734] ma8601 init finish
[ 3.006768] 00 16 50 0e 5b 10 00 0a 20 20 20 20 20 20 01 e5 ..P.[... ..
[ 3.006792] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
[ 3.006804] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
[ 3.006831] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.006891] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc06fc6e4
[ 3.006907] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[ 3.026932] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
[ 3.026945] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.026974] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 3.078186]
[ 3.080402] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 3.096697] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 3.103275] ehci_irq: highspeed device connect
[ 3.108333] usb usb1: hdev->level=0
[ 3.108809] EDID block 1:
[ 3.108818] 02 03 1d f2 4a 01 02 03 84 05 10 12 93 14 1f 23 ....J..........#
[ 3.108827] 09 07 07 83 01 00 00 65 03 0c 00 10 00 8c 0a d0 .......e........
[ 3.108836] 8a 10 e0 2d 10 10 3e 96 00 13 8e 21 00 00 18 01 ...-..>....!....
[ 3.108845] 1d 00 bc 52 d0 1e 20 b8 28 55 40 c4 8e 21 00 00 ...R.. .(U@..!..
[ 3.108854] 1e 01 1d 80 d0 72 1c 16 20 10 2c 25 80 c4 8e 21 .....r.. .,%...!
[ 3.108863] 00 00 9e 8c 0a d0 8a 20 e0 2d 10 10 3e 96 00 c4 ....... .-..>...
[ 3.108872] 8e 21 00 00 18 8c 0a d0 90 20 40 31 20 0c 40 55 .!....... @1 .@U
[ 3.108881] 00 c4 8e 21 00 00 18 00 00 00 00 00 00 00 00 3b ...!...........;
[ 3.108888]
[ 3.108895] Parsing Video Data Block
[ 3.108901] Found VIC 1
[ 3.108905] Found VIC 2
[ 3.108910] Found VIC 3
[ 3.108914] Found VIC 4
[ 3.108919] Found VIC 5
[ 3.108924] Found VIC 16
[ 3.108928] Found VIC 18
[ 3.108933] Found VIC 19
[ 3.108937] Found VIC 20
[ 3.108942] Found VIC 31
[ 3.108946]
[ 3.108953] vendor block does not contain CNC
[ 3.108958] read CNC flags: 0
[ 3.108964] Sink does not support content type 3
[ 3.108970] EDID : Support HDMI
[ 3.108974] YCC444
[ 3.108978] YCC422
[ 3.108982]
[ 3.108987] EDID : ASFreq = 0x07
[ 3.108992] #####################
[ 3.108997] # END EDID DUMP #
[ 3.109002] #####################
[ 3.109007]
[ 3.109009] State Transit: Read EDID -> [TXS_Wait_Upstream]
[ 3.127978] < EP952 Tx Power Down >
[ 3.127985]
[ 3.127988] ========== EP952 Audio Parameter setting ==========
[ 3.130422] < EP952 Audio_Mute_enable >
[ 3.130429] pEP952 Audio_Interface = 0x18
[ 3.130436] pEP952 Audio_Input_Format = 0x03
[ 3.130443]
[ 3.130445] ========== Update EP952 Audio Registers ==========
[ 3.131058] EP952 set to IIS IN
[ 3.133619] EP952 set CS Info:
[ 3.133625] 0x00,
[ 3.133629] 0x00,
[ 3.133633] 0x00,
[ 3.133638] 0x02,
[ 3.133642] 0x01,
[ 3.133646]
[ 3.134256] EP952 Set to 48KHz
[ 3.135896] table[8]: N=6144, CTS=74264 (VIC=4)
[ 3.136415] EP952 set ADO Info:
[ 3.136422] [0]0x70,
[ 3.136427] [1]0x01,
[ 3.136432] [2]0x00,
[ 3.136437] [3]0x00,
[ 3.136441] [4]0x00,
[ 3.136446] [5]0x00,
[ 3.136450]
[ 3.140091] < EP952 Audio_Mute_disable >
[ 3.140099]
[ 3.140101] ========== EP952 Video Parameter setting ==========
[ 3.142527] < EP952 Audio_Mute_enable >
[ 3.143139] < EP952 Video_Mute_enable >
[ 3.143754] EP952 Set to HDMI output mode
[ 3.143762] pEP952 Video_Interface[0] = 0x84
[ 3.143767] pEP952 Video_Interface[1] = 0x00
[ 3.143773] pEP952 Video_Output_Format = 0x00
[ 3.143779] pEP952 Video_Input_Format[0] = 0x04
[ 3.143787]
[ 3.143789] ========== Update EP952 video Registers ==========
[ 3.147158] EP952 Set Sync mode to (H+V+DE)input mode
[ 3.148646] EP952 Set to RGB In
[ 3.149862] EP952 Set to RGB Out
[ 3.150477] EP952 Set to 709 color definition
[ 3.150484] (VIC=4)
[ 3.151386] EP952 set AVI Info:
[ 3.151393] [0]0xBB,
[ 3.151398] [1]0x10,
[ 3.151403] [2]0xA0,
[ 3.151408] [3]0x00,
[ 3.151413] [4]0x04,
[ 3.151418] [5]0x00,
[ 3.151422]
[ 3.153240] < EP952 Video_Mute_disable >
[ 3.156273] < EP952 Audio_Mute_disable >
[ 3.156904] < EP952 Tx Power Up >
[ 3.156910]
[ 3.156913] State Transist: Power Up -> [TXS_Stream]
[ 3.177399] [EP952 Register value]
[ 3.177406] -0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -A -B -C -D -E -F
[ 3.177413] -----------------------------------------------
[ 3.177753] 00| 80 00 00 00 00 14 00 00 55 C0 8F 00 30 80 01 00
[ 3.183128] 10| FF FF FF FB FF FF FF DF F9 FF FF FF FF F7 FF FF
[ 3.188507] 20| 5F FD 38 04 00 04 41 88 68 09 D1 4E 3E 00 00 00
[ 3.193888] 30| 00 00 FF 03 7F 00 FF 0F 00 00 72 06 EE 02 00 F8
[ 3.199261] 40| 08 3F FF 6D C7 CC AE B2 FF FF FF FF 1F 61 01 FF
[ 3.204640] 50| AF FE 7F C9 C7 20 24 FF
[ 3.207283] hub 1-0:1.0: USB hub found
[ 3.207330] FF FF FF 01 4D 63 B5 FE
[ 3.210020] 60| 0B C0 03 00 18 00 BB 10 A0 00 04 00 00 00 00 00
[ 3.215388] 70| 00 00 00 00 70 01 00 00 00 00 FF 00 00 00 02 01
[ 3.220767] 80| 00 01 00 01 00 02 01 01 00
[ 3.223463] -----------------------------------------------
[ 3.394772] hub 1-0:1.0: 1 port detected
[ 3.546312] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.553249] [sunxi_hci_sunxi]: [sunxi-ohci1]: probe, pdev->name: sunxi-ohci, pdev->id: 1, sunxi_ohci: 0xc06fc7e8
[ 3.564580] [sunxi_hci_sunxi]: [sunxi-ohci1]: open clock, is_open: 0
[ 3.591667] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 3.600201] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[ 3.608639] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 3.671239] usb usb2: hdev->level=0
[ 3.675129] hub 2-0:1.0: USB hub found
[ 3.679314] hub 2-0:1.0: 1 port detected
[ 3.684043] get serial_unique failed
[ 3.688200] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[ 3.695873] [sw_udc]: alloc request: ep(0xc06a5920, ep0, 64), req(0xcd2b2dc0)
[ 3.703835] sunxi_udc_set_selfpowered_2302: usb device is not active
[ 3.710905] [sw_udc]: sunxi_udc_pullup, is_on = 0
[ 3.716144] sunxi_udc_set_pullup_2319: usb device is not active
[ 3.722824] file system registered
[ 3.727629] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.735291] android_usb gadget: Number of LUNs=3
[ 3.740430] lun0: LUN: removable file: (no medium)
[ 3.745891] lun1: LUN: removable file: (no medium)
[ 3.751332] lun2: LUN: removable file: (no medium)
[ 3.757103] sunxi_udc_set_selfpowered_2302: usb device is not active
[ 3.764186] android_usb gadget: android_usb ready
[ 3.769436] [sw_hcd0]: usb host driver initialize........
[ 3.775531] [sw_hcd0]: open_usb_clock
[ 3.779882] usb_regulator id vbus io is not exist
[ 3.785124] [sunxi_hcd0]: host_init_state = 0
[ 3.789990] [sw_hcd0]: platform is usb host
[ 3.794726] [sw_hcd0]: sunxi_hcd_init_controller: sunxi_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
[ 3.807068] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[ 3.813958] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
[ 3.823777] usb usb3: hdev->level=0
[ 3.827660] hub 3-0:1.0: USB hub found
[ 3.831843] hub 3-0:1.0: 1 port detected
[ 3.836541] [sw_hcd0]: sunxi_usb_host0_disable start
[ 3.842090] [sw_hcd0]: sunxi_hcd_wait_for_disconnect cnt=0
[ 3.848221] [sunxi_hcd_host0]: Set USB Power OFF
[ 3.850038] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 3.860937] -------sunxi_hcd0_soft_disconnect---------
[ 3.864253] wrn: hcd is not enable, need not stop hcd
[ 3.872281] [sunxi_hcd_host0]: Set USB Power OFF
[ 3.877573] [sw_hcd0]: close_usb_clock
[ 3.881787] [sw_hcd0]: sunxi_usb_host0_disable end
[ 3.887475] mousedev: PS/2 mouse device common for all mice
[ 3.894132] input: sunxi-keyboard as /devices/virtual/input/input1
[ 3.901379] [RTC] WARNING: Rtc time will be wrong!!
[ 3.907117] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 3.914523] i2c /dev entries driver
[ 3.918941] sunxi cedar version 0.1
[ 3.922976] [cedar]: install start!!!
[ 3.927245] [cedar]: install end!!!
[ 3.935247] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.944969] autohotplug_init init ok
[ 3.948979] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
[ 3.957797] cur: pll=1008000000, cpudiv=1, axidiv=3
[ 3.963244] axp22_dcdc3: Failed to create debugfs directory
[ 3.969465] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1008MHz, min freq: 120MHz
[ 3.980142] -------------------CPU V-F Table--------------------
[ 3.986826] frequency = 1536000KHz voltage = 1500mv
[ 3.992444] frequency = 1344000KHz voltage = 1460mv
[ 3.995037] usb 1-1: hdev->level=1
[ 3.995044] hub 1-1:1.0: USB hub found
[ 3.995262] hub 1-1:1.0: 4 ports detected
[ 4.010434] frequency = 1200000KHz voltage = 1320mv
[ 4.016053] frequency = 1008000KHz voltage = 1200mv
[ 4.021672] frequency = 816000KHz voltage = 1100mv
[ 4.027196] frequency = 648000KHz voltage = 1040mv
[ 4.032719] frequency = 0KHz voltage = 1040mv
[ 4.038049] frequency = 0KHz voltage = 1040mv
[ 4.043379] -----------------------------------------------------
[ 4.050352] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.120 2016-08-3 10:59) Compiled in Sep 26 2019 at 00:56:22
[ 4.061803] [mmc]: get mmc2's 2xmode ok, val = 1
[ 4.066938] [mmc]: get mmc2's ddrmode ok, val = 1
[ 4.072179] [mmc]: MMC host used card: 0x4, boot card: 0x4, io_card 0
[ 4.080235] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.091120] [led]:sunxi_led_init begin!
[ 4.091195] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.092741] axp22_dcdc1: Failed to create debugfs directory
[ 4.111240] led1 gpio number is 39
[ 4.113369] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.125175] led1_trigger gpio number is none
[ 4.127522] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 52, RTO !!
[ 4.128376] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 52, RTO !!
[ 4.128406] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.130904] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.132827] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 8, RTO !!
[ 4.132853] *******************Try sdio*******************
[ 4.133682] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5, RTO !!
[ 4.133705] mmc0: req failed (CMD5): -110, retrying...
[ 4.134532] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5, RTO !!
[ 4.134553] mmc0: req failed (CMD5): -110, retrying...
[ 4.135379] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5, RTO !!
[ 4.135400] mmc0: req failed (CMD5): -110, retrying...
[ 4.136227] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 5, RTO !!
[ 4.136248] *******************Try sd *******************
[ 4.137079] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55, RTO !!
[ 4.137922] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55, RTO !!
[ 4.138764] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55, RTO !!
[ 4.139607] [mmc]: *** sunxi_mci_dump_errinfo(L915): smc 2 err, cmd 55, RTO !!
[ 4.139628] *******************Try mmc*******************
[ 4.139639] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.140077] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.140181] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.140283] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.142774] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.324796] led2 gpio number is 33
[ 4.327932] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.338726] led2_trigger gpio number is none
[ 4.339944] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.340411] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.340516] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.340610] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[ 4.340680] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[ 4.340777] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[ 4.340869] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
[ 4.341003] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
[ 4.341093] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 4.341165] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 4.341253] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 4.341346] mmc0: new high speed DDR MMC card at address 0001
[ 4.341785] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
[ 4.341983] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
[ 4.342158] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
[ 4.343066] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
[ 4.343115] mmcblk0: p1 size 1396736 extends beyond EOD, truncated
[ 4.345399] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 4.345641] mmcblk0boot1: unknown partition table
[ 4.346209] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 4.346433] mmcblk0boot0: unknown partition table
[ 4.346621] *******************mmc init ok *******************
[ 4.393389] usb 1-1.2: new high-speed USB device number 3 using sunxi-ehci
[ 4.440692] Registered led device: led1
[ 4.542118] Registered led device: led2
[ 4.547237] usbcore: registered new interface driver usbhid
[ 4.553441] usbhid: USB HID core driver
[ 4.558309] ashmem: initialized
[ 4.561937] logger: created 256K log 'log_main'
[ 4.567103] logger: created 256K log 'log_events'
[ 4.572468] logger: created 256K log 'log_radio'
[ 4.577731] logger: created 256K log 'log_system'
[ 4.583220] Linux telephony interface: v1.00
[ 4.588348] usbcore: registered new interface driver snd-usb-audio
[ 4.599734] asoc: sndi2s0 <-> i2s0 mapping ok
[ 4.606104] [ audio ] err:try to get audio_pa_ctrl failed!
[ 4.612231] sunxi-pcm-codec: probe of sunxi-pcm-codec failed with error -14
[ 4.620047] usb 1-1.2: new high-speed USB device number 4 using sunxi-ehci
[ 4.620611] input: headset as /devices/virtual/input/input2
[ 4.621088] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
[ 4.621312] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
[ 4.621323] I2S1 driver not init,just return.
[ 4.658245] u32 classifier
[ 4.661268] Actions configured
[ 4.665055] Netfilter messages via NETLINK v0.30.
[ 4.670361] nf_conntrack version 0.5.0 (3922 buckets, 15688 max)
[ 4.677470] ctnetlink v0.93: registering with nfnetlink.
[ 4.683443] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.691187] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.697909] xt_time: kernel timezone is -0000
[ 4.702925] IPv4 over IPv4 tunneling driver
[ 4.708028] gre: GRE over IPv4 demultiplexor driver
[ 4.713466] ip_gre: GRE over IPv4 tunneling driver
[ 4.719440] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.725540] arp_tables: (C) 2002 David S. Miller
[ 4.730741] TCP: cubic registered
[ 4.734430] Initializing XFRM netlink socket
[ 4.739494] NET: Registered protocol family 10
[ 4.745665] Mobile IPv6
[ 4.748431] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.754610] IPv6 over IPv4 tunneling driver
[ 4.760375] NET: Registered protocol family 17
[ 4.765353] NET: Registered protocol family 15
[ 4.770305] L2TP core driver, V2.0
[ 4.774086] L2TP IP encapsulation support (L2TPv3)
[ 4.779490] L2TP netlink interface
[ 4.783304] L2TP ethernet pseudowire support (L2TPv3)
[ 4.789447] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 4.797992] ThumbEE CPU extension supported.
[ 4.802755] Registering SWP/SWPB emulation handler
[ 4.808847] axp22_dc5ldo: incomplete constraints, leaving on
[ 4.815240] axp22_eldo2: incomplete constraints, leaving on
[ 4.821493] axp22_eldo1: incomplete constraints, leaving on
[ 4.827725] usb 1-1.2: new high-speed USB device number 5 using sunxi-ehci
[ 4.827926] axp22_dldo1: incomplete constraints, leaving on
[ 4.827979] axp22_aldo3: incomplete constraints, leaving on
[ 4.828030] axp22_aldo2: incomplete constraints, leaving on
[ 4.828089] axp22_aldo1: incomplete constraints, leaving on
[ 4.828164] axp22_rtc: incomplete constraints, leaving on
[ 4.828217] axp22_dcdc5: incomplete constraints, leaving on
[ 4.828315] axp22_dcdc3: incomplete constraints, leaving on
[ 4.828369] axp22_dcdc2: incomplete constraints, leaving on
[ 4.828523] otg_wakelock_init: No USB transceiver found
[ 4.829137] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
[ 4.829507] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[ 4.829553] ths_fetch_sysconfig_para: type err device_used = 1.
[ 4.829756] input: sunxi-ths as /devices/virtual/input/input4
[ 4.830127] suxi_ths: Kernel Thermal management registered
[ 4.830147] fetch C0_LV_count from sysconfig failed
[ 4.830531] sunxi_ths_bind : thermal-budget-0
[ 4.830541] ths_zone trip = 75, adjust lower = 0, upper = 1
[ 4.830575] ths_zone trip = 90, adjust lower = 1, upper = 3
[ 4.830594] CPU Budget:Register notifier
[ 4.830603] CPU Budget:register Success
[ 4.830612] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 4.834324] ALSA device list:
[ 4.834336] #0: sndi2s0
[ 4.973084] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.010084] EXT4-fs (mmcblk0p7): recovery complete
[ 5.016160] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 5.025218] VFS: Mounted root (ext4 filesystem) on device 179:7.
[ 5.032312] devtmpfs: mounted
[ 5.035989] Freeing init memory: 196K
[ 5.056722] usb 1-1.2: new high-speed USB device number 6 using sunxi-ehci
[ 5.083406] hub 1-1:1.0: unable to enumerate USB device on port 2
[ 5.090565] EXT4-fs (mmcblk0p7): re-mounted. Opts: errors=remount-ro,data=ordered
/dev/by-name/UDISK: UUID="98a20f63-94f7-479b-bcfa-cac49537e5f0" TYPE="ext4"
/dev/by-name/UDISK already format by ext4
/dev/by-name/rootfs_data: UUID="de37cc29-b7db-43f3-8a25-a2ae97a35cff" TYPE="ext4"
/dev/by-name/rootfs_data already format by ext4
/dev/by-name/app: UUID="65e6ae77-b95d-4d7c-b2c7-b8fbd7fa201d" TYPE="ext4"
/dev/by-name/app already format by ext4
/dev/by-name/misc: UUID="7e59f81d-06ea-41ca-a424-1f30916b6fe9" TYPE="ext4"
/dev/by-name/misc al[ 5.214952] EXT4-fs (mmcblk0p8): recovery complete
ready format by ext4
[ 5.221293] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 5.234896] EXT4-fs (mmcblk0p1): recovery complete
[ 5.240258] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.251542] EXT4-fs (mmcblk0p9): mounted filesystem without journal. Opts: (null)
[ 5.268184] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
[ 5.276696] ====codec_init_events===
release-indiana-da99667:INDIANA-mass
[ 5.301195] EXT4-fs (mmcblk0p7): re-mounted. Opts: errors=remount-ro,data=ordered
[ 5.316516] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
Starting logging: OK
Populating /dev using udev: [ 5.401516] udevd[128]: starting version 3.1.5
[ 5.582268] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.595120] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.605541] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.616064] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.705945] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.716350] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.726603] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.736849] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.747108] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.757339] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.767549] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.777786] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.788006] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.798208] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.808413] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.818660] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.828884] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.839111] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.849315] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.859565] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.869781] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.879982] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.890223] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.900423] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.910656] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.920875] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.931100] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.941326] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.951541] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.961749] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.971977] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.982175] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 5.992386] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.002603] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.012828] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.023046] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.033271] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.043557] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.053752] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.063987] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.074187] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.084383] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.094625] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.104843] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.115054] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.125257] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.135491] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.145737] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.155928] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.166132] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.176375] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.186593] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.196800] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
[ 6.207015] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
done
[ 6.272044] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing UHS-DDR50 dt B
read-only file system detected...done
mali: starting driver
[ 6.300765] vmalloc: allocation failure: 0 bytes
[ 6.305950] modprobe: page allocation failure: order:0, mode:0xd0
[ 6.314373] Get mali parameter successfully
[ 6.319106] Init Mali gpu successfully
[ 6.324684] Mali: Mali device driver loaded
mode: 0
automatic mode: 720p mode selected
OK
[ 6.381717] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
User Mode:[gpio-keys] Does not verify vid and pid
[joypad-1] device: /dev/input/by-path/platform-sunxi-ehci.1-usb-0:1.2:1.0-event-joystick does not exists.
start game.
start game.
value is: 0
168
Welcome to VividOS
VIVID login:
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment