Created
August 24, 2022 15:33
-
-
Save bakueikozo/b4acdc5358fc1f1cec989a6fb2011e59 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot 2013.10.0-AK_V2.0.04 (Nov 02 2020 - 14:14:37) | |
| DRAM: 64 MiB | |
| 8 MiB | |
| Create flash partition table init OK! | |
| ANYKA SDHC/MMC4.0: 0 | |
| Load Env CRC OK! | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Net: AKEthernet-0 | |
| Hit any key to stop autoboot: 0 | |
| SF: 1307064 bytes @ 0x36000 Read: OK | |
| ## Booting kernel from Legacy Image at 81808000 ... | |
| Image Name: Linux-3.4.35 | |
| Image Type: ARM Linux Kernel Image (uncompressed) | |
| Data Size: 1307000 Bytes = 1.2 MiB | |
| Load Address: 81808000 | |
| Entry Point: 81808040 | |
| Verifying Checksum ... OK | |
| XIP Kernel Image ... OK | |
| Starting kernel ... | |
| Uncompressing Linux... done, booting the kernel. | |
| Anyka Linux Kernel Version: 2.5.02 | |
| Booting Linux on physical CPU 0 | |
| Linux version 3.4.35 (ma@ma-PC) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #5 Mon Nov 2 14:29:31 CST 2020 | |
| CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 | |
| CPU: VIVT data cache, VIVT instruction cache | |
| Machine: Cloud39E_AK3918E+H42_V1.0.2 | |
| Memory policy: ECC disabled, Data cache writeback | |
| ANYKA CPU AK3918 (ID 0x20150200) | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 10160 | |
| Kernel command line: console=ttySAK0,115200n8 root=/dev/mtdblock4 rootfstype=squashfs init=/sbin/init mem=64M memsize=64M | |
| PID hash table entries: 256 (order: -2, 1024 bytes) | |
| Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) | |
| Memory: 40MB = 40MB total | |
| Memory: 36768k/36768k available, 4192k reserved, 0K highmem | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| vmalloc : 0xc3000000 - 0xff000000 ( 960 MB) | |
| lowmem : 0xc0000000 - 0xc2800000 ( 40 MB) | |
| modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
| .text : 0xc0008000 - 0xc0355000 (3380 kB) | |
| .init : 0xc0355000 - 0xc036e000 ( 100 kB) | |
| .data : 0xc036e000 - 0xc0391058 ( 141 kB) | |
| .bss : 0xc039107c - 0xc03aea18 ( 119 kB) | |
| SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| NR_IRQS:95 | |
| sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms | |
| AK39 console driver initial | |
| console [ttySAK0] enabled | |
| Calibrating delay loop... 199.06 BogoMIPS (lpj=995328) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 512 | |
| CPU: Testing write buffer coherency: ok | |
| Setting up static identity map for 0x81a97170 - 0x81a971c8 | |
| devtmpfs: initialized | |
| NET: Registered protocol family 16 | |
| On-chip L2 memory initialized | |
| AK39 clocks: CPU 400MHz, MEM 200MHz, ASIC 100MHz | |
| Anyka platform share gpio locks initialize. | |
| bio: create slab <bio-0> at 0 | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| i2c-ak39 i2c-ak39: i2c-0: AK39 I2C adapter | |
| Linux video capture interface: v2.00 | |
| cfg80211: Calling CRDA to update world regulatory domain | |
| NET: Registered protocol family 2 | |
| IP route cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP established hash table entries: 2048 (order: 2, 16384 bytes) | |
| TCP bind hash table entries: 2048 (order: 1, 8192 bytes) | |
| TCP: Hash tables configured (established 2048 bind 2048) | |
| TCP: reno registered | |
| UDP hash table entries: 256 (order: 0, 4096 bytes) | |
| UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
| NET: Registered protocol family 1 | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| exFAT: Version 1.2.9 | |
| jffs2: version 2.2. c 2001-2006 Red Hat, Inc. | |
| msgmni has been set to 71 | |
| io scheduler noop registered | |
| io scheduler cfq registered (default) | |
| AK39xx uart driver init, (c) 2013 ANYKA | |
| ak39-uart.0: ttySAK0 at MMIO 0x20130000 (irq = 10) is a AK39 | |
| ion: failed to create debug files. | |
| brd: module loaded | |
| loop: module loaded | |
| AK Motor Driver (c) 2013 ANYKA | |
| akgpio driver initialize. | |
| @@@ [akpcm_init]: enter @@@ | |
| @@@ [akpcm_probe]: enter @@@ | |
| akpcmL0->ak39_codec_probe enter... | |
| akpcm probe: mic on | |
| ak39_set_hp_power 1,soft_de_pipa=1 | |
| Headphone driver will power on. | |
| akpcm_probe: OK | |
| akisp_init | |
| Start to init Anyka SPI Flash... | |
| Start to init Anyka partition table... | |
| AK SPI Driver, (c) 2012 ANYKA | |
| akpi regs: SPICON:00000152, SPISTA:00000015, SPIINT:00000000. | |
| ak-spi ak-spi: master is unqueued, this is deprecated | |
| ak_spi setup the master. | |
| pre-scaler=2 (wanted 20Mhz, got 16Mhz) | |
| ak spiflash probe enter. | |
| pre-scaler=2 (wanted 20Mhz, got 16Mhz) | |
| ak_spi_setupxfer,con:00000252. | |
| akspi flash ID: 0x00d84017 | |
| ak-spiflash spi0.0: XD25Q64B (8192 Kbytes) | |
| FHA:partition lib version: V1.0.11 | |
| FHA:boot block num offset:427 | |
| FHA:Sflash_Get_Partition_Startpage g_boot_len:832 | |
| mtd_part[0]: | |
| name = KERNEL | |
| size = 0x180000 | |
| offset = 0x36000 | |
| mask_flags = 0x1 | |
| mtd_part[1]: | |
| name = MAC | |
| size = 0x1000 | |
| offset = 0x1b6000 | |
| mask_flags = 0x1 | |
| mtd_part[2]: | |
| name = ENV | |
| size = 0x1000 | |
| offset = 0x1b7000 | |
| mask_flags = 0x1 | |
| mtd_part[3]: | |
| name = A | |
| size = 0x180000 | |
| offset = 0x1b8000 | |
| mask_flags = 0x1 | |
| mtd_part[4]: | |
| name = B | |
| size = 0x199000 | |
| offset = 0x338000 | |
| mask_flags = 0x1 | |
| mtd_part[5]: | |
| name = C | |
| size = 0x133000 | |
| offset = 0x4d1000 | |
| mask_flags = 0x1 | |
| mtd_part[6]: | |
| name = D | |
| size = 0xa5000 | |
| offset = 0x604000 | |
| mask_flags = 0x1 | |
| mtd_part[7]: | |
| name = E | |
| size = 0x14e000 | |
| offset = 0x6a9000 | |
| mask_flags = 0x1 | |
| Creating 8 MTD partitions on "spi0.0": | |
| 0x000000036000-0x0000001b6000 : "KERNEL" | |
| 0x0000001b6000-0x0000001b7000 : "MAC" | |
| 0x0000001b7000-0x0000001b8000 : "ENV" | |
| 0x0000001b8000-0x000000338000 : "A" | |
| 0x000000338000-0x0000004d1000 : "B" | |
| 0x0000004d1000-0x000000604000 : "C" | |
| 0x000000604000-0x0000006a9000 : "D" | |
| 0x0000006a9000-0x0000007f7000 : "E" | |
| Init AK SPI Flash finish. | |
| akspi master initialize success, use for DMA mode. | |
| AK39E_MAC Ethernet Driver, V1.0 | |
| ak-rtc ak-rtc: rtc core: registered ak-rtc as rtc0 | |
| i2c /dev entries driver | |
| AK MCI Driver (c) 2010 ANYKA | |
| akmci ak_sdio: pdev->name:ak_sdio request gpio irq ret = 0, irq=78 | |
| akmci ak_sdio: Mci Interface driver.mmc0. using l2dma, hw IRQ. detect mode:GPIO detect. | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| lib80211: common routines for IEEE802.11 drivers | |
| ak-rtc ak-rtc: hctosys: invalid date/time | |
| VFS: Mounted root (squashfs filesystem) readonly on device 31:4. | |
| devtmpfs: mounted | |
| Freeing init memory: 100K | |
| mount all file system... | |
| starting mdev... | |
| ************************** | |
| Love Linux ! ! ! | |
| ************************** | |
| 200+0 records in | |
| 200+0 records out | |
| 102400 bytes (100.0KB) copied, 0.025321 seconds, 3.9MB/s | |
| V380E login: === adc ret : 443 === | |
| FIRMWARE_TYPE_AKCARD_MINI_Q7H_MB battery adc value: 443 | |
| ============================================================= | |
| prerun ver: 3.1.7_20190507_f201a07[build:Sep 5 2019_19:57:34] | |
| ============================================================= | |
| V380E login: root | |
| Password: | |
| ============================= | |
| | plug in wifi module | | |
| ============================= | |
| [12]check wifi module (lsusb) | |
| player cmd:[/mnt/mtd/audiofile_player /mnt/mtd/mvsound/sf_sysstarting_cn.wav 0] | |
| default log level=4 | |
| [ak_ao_set_volume:894] set volume 3 | |
| [pcm_dac_set_volume:635] set DEV volume 2 | |
| [init_decode_input:143] decode type=6: PCM | |
| [init_decode_input:157] sample_rate=8000, channel_num=1, sample_bits=16 | |
| --AudioCodec Version V1.15.06_svn5313-- | |
| ## ChipIdval = 0x20150200 | |
| ## CHIP OK | |
| ## warn: setting streamlen(20480) is less than default(131072) | |
| ## len_buf_in=20480, inbufminlen=128, mType=6 | |
| _SD_Decode_Open OK | |
| [ak_adec_open:528] audio decode output, m_ulSize=20480, m_ulDecDataSize=0 | |
| [ak_adec_open:531] m_SampleRate=8000, m_Channels=1, m_BitsPerSample=16 | |
| [ak_adec_open:533] decode buffer free size=20479 | |
| [ak_adec_request_stream:825] request 0x181b0 | |
| [write_pcm_thread:330] thread id: 386 | |
| --- write_pcm_thread start processing --- | |
| [write_pcm_thread:350] sleep..., decode buffer remain=0 | |
| [ak_ao_set_volume:894] set volume 3 | |
| [pcm_dac_set_volume:635] set DEV volume 2 | |
| === play type : 0 === | |
| [write_pcm_thread:352] wakeup... | |
| [ak_adec_get_frame:680] m_SampleRate=8000, m_Channels=1, m_BitsPerSample=16 | |
| [set_dac_param:131] dac i@@@ event-1: open @@@ | |
| octl set sample: 8000 | |
| --AudioFilter Version V1.10.02_svn5270, type:3-- | |
| ## ChipIdval = 0x20150200 | |
| ## MSG: insamplerate:8000, outSamplerate:8012, outSrindex:0, inCh:2, outCh:2 | |
| ## maxinputlen=1024 | |
| ## MSG: use arithmetic_1 resample | |
| ## MSG: resample ratio(i/o) = 0x7fce(Q15), inter_equation=0 | |
| ## unsupport math0 | |
| ## resample open ok | |
| ## realloc len=1792 | |
| @@@ event-3: dac start @@@ | |
| Headphone driver already power on. | |
| Play Finished | |
| [ak_adec_notice_stream_end:759] called, decode free size=15323 | |
| [notice_stream_end:233] notice_stream_end exit | |
| Login incorrect | |
| V380E login: [check_decode_finished:225] decode finished, remain is 0 | |
| [write_pcm_thread:350] sleep..., decode buffer remain=0 | |
| [wait_adec_play_finished:424] ao play status=3, user->status=4 | |
| [wait_adec_play_finished:430] decode finished... | |
| [wait_adec_play_finished:446] play finished | |
| [ak_ao_set_play_status:866] set ao play status to READDY | |
| [ak_adec_cancel_stream:906] ready to join write_pcm_thread | |
| [write_pcm_thread:352] wakeup... | |
| [write_pcm_thread:375] exit | |
| [ak_adec_cancel_stream:908] write_pcm_thread join OK | |
| --Leave AudioCodec Version V1.15.06_svn5313-- | |
| @@@ [playback_pause:970]: wait playback completion ok @@@ | |
| --leave AudioFilter Version V1.10.02_svn5270, type:3-- | |
| aksensor_module_init | |
| sc2232_probe_id id:0xffff | |
| sc1235_probe_id id:0xffff | |
| sc1345_probe_id id:0xffff | |
| sc1245_set_power_on | |
| ================================== | |
| | read sensor id mode | | |
| ================================== | |
| Sensor ID checker running ... | |
| ispsdk_lib version:V3.1.00 | |
| --- AK_ISP_sdk_init g_fd=4 --- | |
| ====== sensor id : 1245 ====== | |
| --- AK_ISP_sdk_exit g_fd=4 closed --- | |
| sensor [sc1245] probed ! | |
| Sensor ID checker end ... | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| network_info.ini already has correct DEV_ID=44450675 then exit! | |
| ============================================================= | |
| watchdog ver: v1.0.0.1 | |
| [commit:78264bb 2019-07-25 16:31:35 +0800] | |
| [build:Aug 1 2019_17:49:00] | |
| ============================================================= | |
| hw_watchdog_init_hal | |
| hw_watchdog_settimeout_hal | |
| Child PID is 429 | |
| ============================================================= | |
| eventhub ver: V1.4.4_beta_18a3984[build:Jul 31 2020_11:22:02] | |
| ============================================================= | |
| updatednsip_r Child PID is 438 | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| add client 6877112575488979061 | |
| /mnt/mtd/nvipcstart.sh: line 49: /mvs/apps/log_server: not found | |
| updatednsip gethostbyname_r err. | |
| updnsGetHost success | |
| gethost by name fail Domain: | |
| time:312768004,Domain:47.107.163.76 | |
| base64:fipwfoE7Sft5n44o1Qbb6g== | |
| before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==×tamp=312768004hsshop2016 | |
| {"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768004,"sign":"f8fc62e4aaf6c7ed99e39ec4f93ec618"} | |
| http form post error= connect:: Network is unreachable | |
| 47.107.163.76:8002timestamp:0 | |
| Check encrypt calculate ID:38259728 MACID:0 IPCID:0 incorrect! | |
| ============================================================= | |
| mvrtsp ver: V1.0.7_4e32fe3[build:Jun 11 2020_14:44:01] | |
| ============================================================== | |
| ============================================================= | |
| eventhub ver: V1.4.4_beta_18a3984[build:Jul 31 2020_11:22:02] | |
| ============================================================= | |
| default log level=4 | |
| [start_monitor_th:78] start monitor thread | |
| [start_monitor_th:81] start monitor thread ok | |
| [monitor:35] this thread id: 452 | |
| =========================== | |
| mp ver: 2.17.0.20190115_alpha_02 | |
| build : Apr 29 2021_21:06:04 | |
| =========================== | |
| init param from <record.ini> finished! | |
| ============= dev attr ============ | |
| lens type: 1 | |
| network reset mode: 1 | |
| ptz opposite run: 0 | |
| vframe encode type: 0 | |
| vframe framerate nolimit: 1 | |
| aframe encode type: 1 | |
| light ctrl: 0 | |
| fps-max: d[30]-n[30] | |
| IPC type: 2 | |
| =================================== | |
| === firmware type is : AK-MINI-VIDICON === | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| updatednsip gethostbyname_r err. | |
| updatednsip gethostbyname_r err. | |
| [0:00:25][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:25][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:25][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| === product id : 43 === | |
| fopen: No such file or directory | |
| IFCReadStringOnce Warning:no such file(/tmp/mvs_attr.conf) | |
| IFCReadStringOnce Warning:no such file(/tmp/mvs_attr.conf) | |
| ==vendor id: 0 == product id: 43 == | |
| =============== init ============== | |
| time_cnt: 0 | |
| ct1: 0 | |
| stime_hms: 00-00-00 | |
| etime_hms: 00-00-00 | |
| ct2: 0 | |
| stime_hms: 00-00-00 | |
| etime_hms: 00-00-00 | |
| ct3: 0 | |
| stime_hms: 00-00-00 | |
| etime_hms: 00-00-00 | |
| area: | |
| ========================0 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| ------------------------32 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| 1 1 1 1 1 1 1 1 | |
| =================================== | |
| ================= mini firmware type: 65 ================= | |
| >>> no open the region_service | |
| [27]===== go to init network !!! ==== | |
| exited, status=255 | |
| killall: wifi_connect.sh: no process killed | |
| killall: udhcpc: no process killed | |
| killall: wpa_supplicant: no process killed | |
| killall: updatednsip_r: no process killed | |
| killall: wpa_cli_lite: no process killed | |
| killall: wifi_softap.sh: no process killed | |
| killall: udhcpd: no process killed | |
| killall: hostapd: no process killed | |
| ifconfig: SIOCGIFFLAGS: No such device | |
| check_eth0_mac : eth0 mac get ioctl error!: No such device | |
| [0:00:27][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:27][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:27][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| insmod: can't insert '/mvs/modules/otg-hs.ko': File exists | |
| [28]check wifi module (lsusb) | |
| updatednsip_r Child PID is 493 | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| [29]=== wifi module: rtl8188F | |
| updatednsip gethostbyname_r err. | |
| updnsGetHost success | |
| gethost by name fail Domain: | |
| time:312768010,Domain:47.107.163.76 | |
| base64:fipwfoE7Sft5n44o1Qbb6g== | |
| before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==×tamp=312768010hsshop2016 | |
| {"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768010,"sign":"82c9be0452f05eba48ea7c354db914e3"} | |
| http form post error= connect:: Network is unreachable | |
| 47.107.163.76:8002timestamp:0 | |
| [0:00:29][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:29][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:29][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| updatednsip gethostbyname_r err. | |
| updatednsip gethostbyname_r err. | |
| [create_wait_queue:165] Waiting for connect...... | |
| [handle_thread:318] thread id: 521 | |
| =================== video init in =====> | |
| vi version: libmpi_venc V2.2.06 | |
| [ak_vi_match_sensor:881] config_file: /mnt/mtd/isp_sc1245.conf | |
| killall: wifi_connect.sh: no process killed | |
| [isp.conf]version: 3.004_xc, sensor id: 0x1245, style id: 0 | |
| [isp.conf]modify time: 2019-7-8 16:01:50 | |
| [check_file:347] check isp cfg: /mnt/mtd/isp_sc1245.conf OK | |
| [match_sensor:1179] ak_vi_match_sensor OK | |
| [ak_vi_open:922] register device, dev type: 0 | |
| new device | |
| [vi_register_device:717] new dev=0x1403b8 | |
| ----- libakuio.so V2.0.03 ----- | |
| [libakuio][/dev/ion] kernel config reserve mem size: 25165824, 0x1800000 | |
| [libakuio]ION: alloc 25165824 bytes for process 442 | |
| [libakuio]ION: yield 12 for iad 0xb6f7cc3c | |
| --------------- pmem info --------------- | |
| PMEM_GET_TOTAL_SIZE: 25165824 bytes | |
| PMEM_GET_PHYS: 0x80000000 | |
| pmem.vaddr: 0xb4f9f000 | |
| --------------- info End --------------- | |
| ####akuio pmem init success### | |
| ispsdk_lib version:V3.1.00 | |
| --- AK_ISP_sdk_init g_fd=15 --- | |
| sc1245_set_power_on | |
| hight light: | |
| frame_rate=20 max_exp_time=2245 low_light_gain=12 | |
| low light:sc1245_set_fps set fps=20 fail | |
| frame_rate=10 max_exp_time=4490 light_gain=4 | |
| hight light fps: 20 | |
| [isp_set_sensor_fps:1859] set sensor fps: 20 | |
| killall: udhcpc: no process killed | |
| ISP: cmd=0x4004497A, err:22, estr:Invalid argument | |
| [set_fps:185] set fps:20 failed | |
| g_r3020:255 | |
| register vi device ok, dev_count=1 | |
| [ak_vi_open:932] register device OK, pdev: 0x1403b8 | |
| [vi_new_user:522] now user_flg=0, user_ref=1 | |
| max crop width:1280, height:960 | |
| active crop width:1280, height:720 | |
| crop left:0, top:0 | |
| ################ [cwidth]: 1280 [cheighsc1245_set_fps set fps=20 fail | |
| t]: 720 ################# | |
| after align: main_width:1280, main_height:720, sub_width:640, sub_width:360 | |
| [load_def_awb_step:205] get awb_attr ok, auto_awb_step:30 | |
| hight light: | |
| frame_rate=20 max_exp_time=2245 low_lighak_camera_set_parm pcid:1 | |
| t_gain=12 | |
| [change_fps_ptak_camera_set_parm pcid:1, ch2w:640, ch2h:360 | |
| hread:714] thread id: 524 | |
| low light: | |
| frame_rate=10 max_exp_time=4490 light_gain=4 | |
| hight light fps: 20 | |
| [isp_set_sensor_fps:1859] set sensor fps: 20 | |
| ISP: cmd=0x4004497A, err:22, estr:Invalid argument | |
| [set_fps:185] set fps:20 failed | |
| killall: wpa_supplicant: no process killed | |
| init CROP succeedded! reset to CROP[1280, 720] | |
| video channel attr: | |
| channel_attr_main_width <1280>, channel_attr_main_height <720> | |
| channel_attr_sub_width <640>, channel_attr_sub_height <360> | |
| channel_attr_crop_left <0>, channel_attr_crop_top <0> | |
| channel_attr_crop_width <1280>, channel_attr_crop_height <720> | |
| [isp_set_sensor_fps:1859] set sensor fps: 25 | |
| [init_vi:1135] capture fps: 25 | |
| video input info: | |
| main_w[1280], main_h[720], sub_w[640], sub_h[360] | |
| [init_video:1223] start capture ... | |
| [malloc_capture_buffers:115] ion_mem: 0xb5393800, temp: 0x803f4800 | |
| [malloc_capture_buffers:122] n_buffers: 0, start: 0xb5393800, length: 2535424 | |
| [malloc_capture_buffers:122] n_buffers: 1, start: 0xb55fe800, length: 2535424 | |
| [malloc_capture_buffers:122] n_buffers: 2, start: 0xb5869800, length: 2535424 | |
| [malloc_capture_buffers:122] n_buffers: 3, start: 0xb5ad4800, length: 2535424 | |
| [malloc_capture_buffers:128] set buffer size: 2535424 ok | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| killed by signal 9 | |
| killall: wpa_cli_lite: no process killed | |
| killall: wifi_softap.sh: no process killed | |
| [0:00:31][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:31][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:31][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| killall: udhcpd: no process killed | |
| killall: hostapd: no process killed | |
| updatednsip_r Child PID is 539 | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| updatednsip gethostbyname_r err. | |
| updnsGetHost success | |
| gethost by name fail Domain: | |
| time:312768015,Domain:47.107.163.76 | |
| base64:fipwfoE7Sft5n44o1Qbb6g== | |
| before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==×tamp=312768015hsshop2016 | |
| {"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768015,"sign":"221dd55e027a32d3ace29f14d5a8b870"} | |
| http form post error= connect:: Network is unreachable | |
| 47.107.163.76:8002timestamp:0 | |
| [0:00:33][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:33][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:33][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| ioctl SIOCSIFADDR 1 error: No such device | |
| [reload_config_awb_step:225] get awb_attr ok, cur auto_awb_step:10, set to step:30 | |
| check_wifi_hw_exist: ioctl: No such device | |
| check_wifi_hw_exist: ioctl: No such device | |
| check_wifi_hw_exist: ioctl: No such device | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| check_wifi_hw_exist: ioctl: No such device | |
| updatednsip gethostbyname_r err. | |
| updatednsip gethostbyname_r err. | |
| [0:00:35][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:35][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:35][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| check_wifi_hw_exist: ioctl: No such device | |
| [init_video:1223] start capture ... | |
| [set_buffer_size:154] REQBUFS failed! | |
| [set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy | |
| [set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0 | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| [0:00:37][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:37][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:37][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| exited, status=255 | |
| updatednsip_r Child PID is 610 | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| [0:00:39][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:39][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:39][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| updatednsip gethostbyname_r err. | |
| updnsGetHost success | |
| gethost by name fail Domain: | |
| time:312768021,Domain:47.107.163.76 | |
| base64:fipwfoE7Sft5n44o1Qbb6g== | |
| before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==×tamp=312768021hsshop2016 | |
| {"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768021,"sign":"4eec2b8e88ca3fe54a6b08b4d61cc677"} | |
| http form post error= connect:: Network is unreachable | |
| 47.107.163.76:8002timestamp:0 | |
| updatednsip gethostbyname_r err. | |
| updatednsip gethostbyname_r err. | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| [init_video:1223] start capture ... | |
| [set_buffer_size:154] REQBUFS failed! | |
| [set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy | |
| [set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0 | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| [0:00:41][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:41][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:41][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| ### mv_Sendto_Render_Mutex_Lock ### | |
| ====== hostapd get result: 619 root 0:00 hostapd /tmp/wificonf/hostapd_use.conf -B | |
| get it !!! | |
| ### mv_Sendto_Render_Mutex_Unlock ### | |
| [0:00:43][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:43][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:43][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| [0:00:45][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:45][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:45][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [init_video:1223] start capture ... | |
| [set_buffer_size:154] REQBUFS failed! | |
| [set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy | |
| [set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0 | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| [0:00:47][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:47][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:47][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| exited, status=255 | |
| updatednsip_r Child PID is 627 | |
| ============================================================= | |
| as9updatednsip ver: 8.5.9.1_20190413_9d4b238[build:Mar 30 2020_15:30:49] | |
| ============================================================= | |
| Check encrypt calculate ID:144495892 MACID:-1 IPCID:44450675 incorrect! | |
| [0:00:49][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:49][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:49][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| updatednsip gethostbyname_r err. | |
| updnsGetHost success | |
| gethost by name fail Domain: | |
| time:312768032,Domain:47.107.163.76 | |
| base64:fipwfoE7Sft5n44o1Qbb6g== | |
| before md5:encrypt=fipwfoE7Sft5n44o1Qbb6g==×tamp=312768032hsshop2016 | |
| {"encrypt":"fipwfoE7Sft5n44o1Qbb6g==","timestamp":312768032,"sign":"6adbea8599f72cb38d5f01c4c6f216cd"} | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| [init_video:1223] start capture ... | |
| [set_buffer_size:154] REQBUFS failed! | |
| [set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy | |
| [set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0 | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| [0:00:51][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:51][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:51][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| http form post error= connect:: Operation now in progress | |
| 47.107.163.76:8002timestamp:0 | |
| updatednsip gethostbyname_r err. | |
| updatednsip gethostbyname_r err. | |
| [0:00:53][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:53][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:53][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| [0:00:55][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:55][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:55][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [init_video:1223] start capture ... | |
| [set_buffer_size:154] REQBUFS failed! | |
| [set_buffer_size:158] VIDIOC_REQBUFS, Device or resource busy | |
| [set_v4l2_qbuf:357] VIDIOC_QBUF, Invalid argument, i: 0 | |
| [isp_vi_capture_on:719] stream on, drop first 4 frames | |
| [0:00:57][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:57][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:57][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [0:00:59][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:59][WRN][ulog][TCP]DNS parsing error, retcode=[-23] | |
| [0:00:59][WRN][ulog]Upload device base information failed ! retcode=[-23] | |
| [get_v4l2_ptr:409] select timeout! tv.tv_sec=0 | |
| [isp_vi_capture_on:725] get v4l2 frame ptr failed! | |
| [init_video:1225] vi capture on failed | |
| Restarting system. | |
| Restarting Linux version 3.4.35 (ma@ma-PC) (gcc version 4.8.5 (anyka (gcc-4.8.5 + binutils-2.24 + ulcibc-0.9.33.2)(20170223)) ) #5 Mon Nov 2 14:29:31 CST 2020 | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment