PKGBUILD for frr-git-8.2.dev

frr-init-functions

# /lib/lsb/init-functions for Debian -*- shell-script -*-
#
#Copyright (c) 2002-08 Chris Lawrence
#All rights reserved.
#
#Redistribution and use in source and binary forms, with or without
#modification, are permitted provided that the following conditions
#are met:
#1. Redistributions of source code must retain the above copyright
#   notice, this list of conditions and the following disclaimer.
#2. Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
#3. Neither the name of the author nor the names of other contributors
#   may be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
#THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
#IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
#LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
#BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
#OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
#EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

start_daemon () {
    local force nice pidfile exec args OPTIND
    force=""
    nice=0
    pidfile=/dev/null

    OPTIND=1
    while getopts fn:p: opt ; do
        case "$opt" in
            f)  force="force";;
            n)  nice="$OPTARG";;
            p)  pidfile="$OPTARG";;
        esac
    done
    
    shift $(($OPTIND - 1))
    if [ "$1" = '--' ]; then
        shift
    fi

    exec="$1"; shift

    args="--start --nicelevel $nice --quiet --oknodo"
    if [ "$force" ]; then
        /sbin/start-stop-daemon $args \
	    --chdir "$PWD" --startas $exec --pidfile /dev/null -- "$@"
    elif [ $pidfile ]; then
        /sbin/start-stop-daemon $args \
	    --chdir "$PWD" --exec $exec --oknodo --pidfile "$pidfile" -- "$@"
    else
        /sbin/start-stop-daemon $args --chdir "$PWD" --exec $exec -- "$@"
    fi
}

pidofproc () {
    local pidfile base status specified pid OPTIND
    pidfile=
    specified=
    
    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG"
                specified="specified"
		;;
        esac
    done
    shift $(($OPTIND - 1))
    if [ $# -ne 1 ]; then
        echo "$0: invalid arguments" >&2
        return 4
    fi

    base=${1##*/}
    if [ ! "$specified" ]; then
        pidfile="/var/run/$base.pid"
    fi

    if [ -n "${pidfile:-}" -a -r "$pidfile" ]; then
        read pid < "$pidfile"
        if [ -n "${pid:-}" ]; then
            if $(kill -0 "${pid:-}" 2> /dev/null); then
                echo "$pid" || true
                return 0
            elif ps "${pid:-}" >/dev/null 2>&1; then
                echo "$pid" || true
                return 0 # program is running, but not owned by this user
            else
                return 1 # program is dead and /var/run pid file exists
            fi
        fi
    fi
    if [ -n "$specified" ]; then
        if [ -e "$pidfile" -a ! -r "$pidfile" ]; then
            return 4 # pidfile exists, but unreadable, return unknown
        else
            return 3 # pidfile specified, but contains no PID to test
        fi
    fi
    if [ -x /bin/pidof ]; then
        status="0"
        /bin/pidof -o %PPID -x $1 || status="$?"
        if [ "$status" = 1 ]; then
            return 3 # program is not running
        fi
        return 0
    fi
    return 4 # Unable to determine status
}

# start-stop-daemon uses the same algorithm as "pidofproc" above.
killproc () {
    local pidfile sig status base name_param is_term_sig OPTIND
    pidfile=
    name_param=
    is_term_sig=

    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG";;
        esac
    done
    shift $(($OPTIND - 1))

    base=${1##*/}
    if [ ! $pidfile ]; then
        name_param="--name $base --pidfile /var/run/$base.pid"
    else
        name_param="--pidfile $pidfile"
    fi

    sig=$(echo ${2:-} | sed -e 's/^-\(.*\)/\1/')
    sig=$(echo $sig | sed -e 's/^SIG\(.*\)/\1/')
    if [ "$sig" = 15 ] || [ "$sig" = TERM ]; then
        is_term_sig="terminate_signal"
    fi
    status=0
    if [ ! "$is_term_sig" ]; then
        if [ -n "$sig" ]; then
            /sbin/start-stop-daemon --stop --signal "$sig" \
		--quiet $name_param || status="$?"
        else
            /sbin/start-stop-daemon --stop \
		--retry 5 \
		--quiet $name_param || status="$?"
        fi
    else
        /sbin/start-stop-daemon --stop --quiet \
	    --oknodo $name_param || status="$?"
    fi
    if [ "$status" = 1 ]; then
        if [ -z "$sig" ]; then
            return 0
        fi
        return 3 # program is not running
    fi

    if [ "$status" = 0 ] && [ "$is_term_sig" ] && [ "$pidfile" ]; then
        pidofproc -p "$pidfile" "$1" >/dev/null || rm -f "$pidfile"
    fi
    return 0
}

# Return LSB status
status_of_proc () {
    local pidfile daemon name status OPTIND

    pidfile=
    OPTIND=1
    while getopts p: opt ; do
        case "$opt" in
            p)  pidfile="$OPTARG";;
        esac
    done
    shift $(($OPTIND - 1))

    if [ -n "$pidfile" ]; then
        pidfile="-p $pidfile"
    fi
    daemon="$1"
    name="$2"

    status="0"
    pidofproc $pidfile $daemon >/dev/null || status="$?"
    if [ "$status" = 0 ]; then
        log_success_msg "$name is running"
        return 0
    elif [ "$status" = 4 ]; then
        log_failure_msg "could not access PID file for $name"
        return $status
    else
        log_failure_msg "$name is not running"
        return $status
    fi
}

log_use_fancy_output () {
    TPUT=/usr/bin/tput
    EXPR=/usr/bin/expr
    if  [ -t 1 ] &&
	[ "x${TERM:-}" != "x" ] &&
	[ "x${TERM:-}" != "xdumb" ] &&
	[ -x $TPUT ] && [ -x $EXPR ] &&
	$TPUT hpa 60 >/dev/null 2>&1 &&
	$TPUT setaf 1 >/dev/null 2>&1
    then
        [ -z $FANCYTTY ] && FANCYTTY=1 || true
    else
        FANCYTTY=0
    fi
    case "$FANCYTTY" in
        1|Y|yes|true)   true;;
        *)              false;;
    esac
}

log_success_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg $@
    fi
    log_end_msg 0
}

log_failure_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg $@ "..."
    fi
    log_end_msg 1 || true
}

log_warning_msg () {
    if [ -n "${1:-}" ]; then
        log_begin_msg $@ "..."
    fi
    log_end_msg 255 || true
}

#
# NON-LSB HELPER FUNCTIONS
#
# int get_lsb_header_val (char *scriptpathname, char *key)
get_lsb_header_val () {
        if [ ! -f "$1" ] || [ -z "${2:-}" ]; then
                return 1
        fi
        LSB_S="### BEGIN INIT INFO"
        LSB_E="### END INIT INFO"
        sed -n "/$LSB_S/,/$LSB_E/ s/# $2: \(.*\)/\1/p" $1
}

# If the currently running init daemon is upstart, return zero; if the
# calling init script belongs to a package which also provides a native
# upstart job, it should generally exit non-zero in this case.
init_is_upstart()
{
   if [ -x /sbin/initctl ] && /sbin/initctl version 2>/dev/null | /bin/grep -q upstart; then
       return 0
   fi
   return 1
}

# int log_begin_message (char *message)
log_begin_msg () {
    log_begin_msg_pre "$@"
    if [ -z "${1:-}" ]; then
        return 1
    fi
    echo -n "$@" || true
    log_begin_msg_post "$@"
}

# Sample usage:
# log_daemon_msg "Starting GNOME Login Manager" "gdm"
#
# On Debian, would output "Starting GNOME Login Manager: gdm"
# On Ubuntu, would output " * Starting GNOME Login Manager..."
#
# If the second argument is omitted, logging suitable for use with
# log_progress_msg() is used:
#
# log_daemon_msg "Starting remote filesystem services"
#
# On Debian, would output "Starting remote filesystem services:"
# On Ubuntu, would output " * Starting remote filesystem services..."

log_daemon_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    log_daemon_msg_pre "$@"

    if [ -z "${2:-}" ]; then
        echo -n "$1:" || true
        return
    fi
    
    echo -n "$1: $2" || true
    log_daemon_msg_post "$@"
}

# #319739
#
# Per policy docs:
#
#     log_daemon_msg "Starting remote file system services"
#     log_progress_msg "nfsd"; start-stop-daemon --start --quiet nfsd
#     log_progress_msg "mountd"; start-stop-daemon --start --quiet mountd
#     log_progress_msg "ugidd"; start-stop-daemon --start --quiet ugidd
#     log_end_msg 0
#
# You could also do something fancy with log_end_msg here based on the
# return values of start-stop-daemon; this is left as an exercise for
# the reader...
#
# On Ubuntu, one would expect log_progress_msg to be a no-op.
log_progress_msg () {
    if [ -z "${1:-}" ]; then
        return 1
    fi
    echo -n " $@" || true
}


# int log_end_message (int exitstatus)
log_end_msg () {
    # If no arguments were passed, return
    if [ -z "${1:-}" ]; then
        return 1
    fi

    local retval
    retval=$1

    log_end_msg_pre "$@"

    # Only do the fancy stuff if we have an appropriate terminal
    # and if /usr is already mounted
    if log_use_fancy_output; then
        RED=$( $TPUT setaf 1)
        YELLOW=$( $TPUT setaf 3)
        NORMAL=$( $TPUT op)
    else
        RED=''
        YELLOW=''
        NORMAL=''
    fi

    if [ $1 -eq 0 ]; then
        echo "." || true
    elif [ $1 -eq 255 ]; then
        /bin/echo -e " ${YELLOW}(warning).${NORMAL}" || true
    else
        /bin/echo -e " ${RED}failed!${NORMAL}" || true
    fi
    log_end_msg_post "$@"
    return $retval
}

log_action_msg () {
    log_action_msg_pre "$@"
    echo "$@." || true
    log_action_msg_post "$@"
}

log_action_begin_msg () {
    log_action_begin_msg_pre "$@"
    echo -n "$@..." || true
    log_action_begin_msg_post "$@"
}

log_action_cont_msg () {
    echo -n "$@..." || true
}

log_action_end_msg () {
    local end
    log_action_end_msg_pre "$@"
    if [ -z "${2:-}" ]; then
        end="."
    else
        end=" ($2)."
    fi

    if [ $1 -eq 0 ]; then
        echo "done${end}" || true
    else
        if log_use_fancy_output; then
            RED=$( $TPUT setaf 1)
            NORMAL=$( $TPUT op)
            /bin/echo -e "${RED}failed${end}${NORMAL}" || true
        else
            echo "failed${end}" || true
        fi
    fi
    log_action_end_msg_post "$@"
}

# Pre&Post empty function declaration, to be overriden from /lib/lsb/init-functions.d/*
log_daemon_msg_pre () { :; }
log_daemon_msg_post () { :; }
log_begin_msg_pre () { :; }
log_begin_msg_post () { :; }
log_end_msg_pre () { :; }
log_end_msg_post () { :; }
log_action_msg_pre () { :; }
log_action_msg_post () { :; }
log_action_begin_msg_pre () { :; }
log_action_begin_msg_post () { :; }
log_action_end_msg_pre () { :; }
log_action_end_msg_post () { :; }

# Include hooks from other packages in /lib/lsb/init-functions.d
for hook in $(run-parts --lsbsysinit --list /lib/lsb/init-functions.d 2>/dev/null); do
    [ -r $hook ] && . $hook || true
done

FANCYTTY=
[ -e /etc/lsb-base-logging.sh ] && . /etc/lsb-base-logging.sh || true

frr.sysusers

# Create frr user
g frr 177
u frr 177:177 - /run/frr
# Create frrvty group and add frr user to this group
g frrvty 178
m frr frrvty

frr.tmpfiles

d /etc/frr 0750 frr frr
d /var/log/frr 0750 frr frr
d /run/frr 0750 frr frr
Z /etc/frr - frr frr

PKGBUILD

# Maintainer: Juergen Werner <juergen at opensourcerouting dot org>
# Contributor: Shalygin Konstantin <k0ste at k0ste dot ru>

pkgname=frr-git
_pkgname=frr
pkgver=8.2.dev.r26682
pkgrel=2
pkgdesc='FRRouting (quagga fork) supports BGP4, OSPFv2, OSPFv3, ISIS, RIP, RIPng, PIM, LDP, BFD, VRRP, NHRP and EIGRP.'
arch=('x86_64' 'i686')
url="https://frrouting.org/"
license=('GPL2')
depends=('libcap' 'json-c' 'net-snmp' 'rtrlib' 'libyang' 'libunwind' 'c-ares' 'libelf')
makedepends=('perl-xml-libxml' 'python-sphinx' 'git')
checkdepends=('python-pytest')
optdepends=('rsyslog: syslog support' 'python: for frr-reload.py and generate_support_bundle.py')
conflicts=('quagga' 'babeld' 'quagga_cumulus' "${_pkgname}")
provides=('quagga' 'quagga_cumulus' "frr=${pkgver%%.[^0-9]*}-${pkgrel}")
backup=("etc/${_pkgname}/${_pkgname}.conf"
        "etc/${_pkgname}/daemons.conf"
        "etc/${_pkgname}/vtysh.conf")
source=("$pkgname::git+https://github.com/FRRouting/frr.git"
        "${_pkgname}.sysusers"
        "${_pkgname}.tmpfiles"
	"${_pkgname}-init-functions")
sha256sums=('SKIP'
            'b713df127ea476d6ec7793854cbb75f24085551816108b0c5ca4ae5feb9b74b6'
            'd4ee57baa7f067e07f6456dedf59e54f56774924e2e2b2ea8ac01151237ac19b'
            'e6e2592a8b0b18f7f173186fb4ebf23e642b3d912179f0bb36251962ca64cd7a')

pkgver() {
  cd ${pkgname}
  source config.version
  echo "${DIST_PACKAGE_VERSION}.r$(git rev-list --count HEAD)" | sed 's/-/./g'
}

prepare() {
  cd ${pkgname}

  autoreconf -fvi
  ./configure \
    CFLAGS="$CFLAGS" \
    LDFLAGS="$LDFLAGS" \
    --prefix="/usr" \
    --sbindir="/usr/bin" \
    --sysconfdir="/etc/${_pkgname}" \
    --localstatedir="/run/${_pkgname}" \
    --with-libpam \
    --enable-snmp="agentx" \
    --enable-multipath=256 \
    --enable-user="${_pkgname}" \
    --enable-group="${_pkgname}" \
    --enable-vty-group="${_pkgname}vty" \
    --enable-configfile-mask="0640" \
    --enable-logfile-mask="0640" \
    --enable-shell-access \
    --enable-rpki \
    --enable-fpm
}

build() {
  cd ${pkgname}
  # Fight unused direct deps
  sed -i -e "s/ -shared / $LDFLAGS\0 /g" libtool
  make CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS"
}

check() {
  cd ${pkgname}
  make check
}

package() {
  cd ${pkgname}
  make DESTDIR="${pkgdir}" install

  install -Dm0644 "../frr-init-functions" "${pkgdir}/usr/bin/"

  pushd "redhat"
  sed -ri 's|/var/run/frr|/run/frr|g' "${_pkgname}.logrotate"
  install -Dm0644 "${_pkgname}.logrotate" "${pkgdir}/etc/logrotate.d/${_pkgname}"
  install -Dm0644 "${_pkgname}.pam" "${pkgdir}/etc/pam.d/${_pkgname}"
  popd

  install -Dm0644 "../${_pkgname}.tmpfiles" "${pkgdir}/usr/lib/tmpfiles.d/${_pkgname}.conf"
  install -Dm0644 "../${_pkgname}.sysusers" "${pkgdir}/usr/lib/sysusers.d/${_pkgname}.conf"

  pushd "tools"
  sed -ri 's|/usr/lib/frr/|/usr/bin/|g' "${_pkgname}.service"
  install -Dm0644 "${_pkgname}.service" "${pkgdir}/usr/lib/systemd/system/${_pkgname}.service"
  popd

  pushd "tools/etc"
  install -Dm0644 "${_pkgname}/daemons" "${pkgdir}/etc/${_pkgname}/daemons.conf"
  install -Dm0644 "iproute2/rt_protos.d/${_pkgname}.conf" "${pkgdir}/etc/iproute2/rt_protos.d/${_pkgname}.conf"
  install -Dm0644 "${_pkgname}/${_pkgname}.conf" "${pkgdir}/etc/${_pkgname}/${_pkgname}.conf"
  install -Dm0644 "${_pkgname}/vtysh.conf" "${pkgdir}/etc/${_pkgname}/vtysh.conf"
  install -Dm0644 "rsyslog.d/45-${_pkgname}.conf" "${pkgdir}/etc/rsyslog.d/45-${_pkgname}.conf"
  popd

  pushd "${pkgdir}/usr/bin"
    for file in frr frr-reload frrcommon.sh frrinit.sh watchfrr.sh;
    do
      sed -ri 's|/lib/lsb/init-functions|/usr/bin/frr-init-functions|g' "$file";
    done
    sed -ri 's|C_PATH/daemons\"|C_PATH/daemons.conf\"|g' frrcommon.sh
    sed -ri 's|load_old_config \"\$C_PATH/daemons.conf\"|load_old_config \"\$C_PATH/daemons\"|g' frrcommon.sh
  popd

  pushd "${pkgdir}/usr/lib/systemd/system"
    sed -ri 's|frrinit.sh|frr|g' frr.service
  popd
}