Skip to content

Instantly share code, notes, and snippets.

@bdowning

bdowning/Xorg.0.log

Created July 17, 2012 01:05
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save bdowning/3126250 to your computer and use it in GitHub Desktop.
Save bdowning/3126250 to your computer and use it in GitHub Desktop.
Download ZIP
nouveau fence interrupt patch dmesg dump
Raw
dmesg.out
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-rc7-ARCH-00027-g8772d16 (bdowning@saphira) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Mon Jul 16 19:21:24 CDT 2012
[ 0.000000] Command line: root=UUID=89ccd806-db3e-49d2-a338-5efb0c5829dc ro initrd=../initramfs-linux-git.img BOOT_IMAGE=../vmlinuz-linux-git
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009b3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009b400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e1000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffaefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bffaf000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. G50VT /G50VT , BIOS 210 01/08/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbff9ffff]
[ 0.000000] [mem 0x00000000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbff9ffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xbff9ffff @ [mem 0x1f9fc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13fffffff]
[ 0.000000] [mem 0x100000000-0x13fffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13fffffff @ [mem 0xbff9a000-0xbff9ffff]
[ 0.000000] RAMDISK: [mem 0x7fbed000-0x7fffefff]
[ 0.000000] ACPI: RSDP 00000000000f9410 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bffa0100 0007C (v01 _ASUS_ Notebook 20090108 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bffa0290 000F4 (v03 010809 FACP1633 20090108 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000bffa0690 0B812 (v01 G50V0 G50V0100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000bffaf000 00040
[ 0.000000] ACPI: APIC 00000000bffa0390 0006C (v01 010809 APIC1633 20090108 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bffa0440 0003C (v01 010809 OEMMCFG 20090108 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bffa0480 00176 (v01 _ASUS_ Notebook 20090108 MSFT 00000097)
[ 0.000000] ACPI: ECDT 00000000bffa0630 00054 (v01 010809 OEMECDT 20090108 MSFT 00000097)
[ 0.000000] ACPI: DBGP 00000000bffa0400 00034 (v01 010809 DBGP1633 20090108 MSFT 00000097)
[ 0.000000] ACPI: BOOT 00000000bffa0600 00028 (v01 010809 BOOT1633 20090108 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bffaf040 00071 (v01 010809 OEMB1633 20090108 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bffabeb0 00038 (v01 010809 OEMHPET 20090108 MSFT 00000097)
[ 0.000000] ACPI: ATKG 00000000bffaf2c0 08024 (v01 010809 OEMATKG 20090108 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bffb7e50 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13fffc000-0x13fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009afff]
[ 0.000000] node 0: [mem 0x00100000-0xbff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048363
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3909 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765920 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e1000
[ 0.000000] PM: Registered nosave memory: 00000000000e1000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bffa0000 - 00000000bffaf000
[ 0.000000] PM: Registered nosave memory: 00000000bffaf000 - 00000000bffe0000
[ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s83008 r8192 d23488 u524288
[ 0.000000] pcpu-alloc: s83008 r8192 d23488 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027877
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=89ccd806-db3e-49d2-a338-5efb0c5829dc ro initrd=../initramfs-linux-git.img BOOT_IMAGE=../vmlinuz-linux-git
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046040k/5242880k available (4570k kernel code, 1049428k absent, 147412k reserved, 4271k data, 756k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: PIT calibration matches HPET. 1 loops
[ 0.000000] Detected 2659.981 MHz processor.
[ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 5322.62 BogoMIPS (lpj=8866603)
[ 0.007048] pid_max: default: 32768 minimum: 301
[ 0.007263] Security Framework initialized
[ 0.007452] AppArmor: AppArmor disabled by boot time parameter
[ 0.008102] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011822] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.013055] Mount-cache hash table entries: 256
[ 0.013567] Initializing cgroup subsys cpuacct
[ 0.013753] Initializing cgroup subsys memory
[ 0.013948] Initializing cgroup subsys devices
[ 0.014132] Initializing cgroup subsys freezer
[ 0.014316] Initializing cgroup subsys net_cls
[ 0.014499] Initializing cgroup subsys blkio
[ 0.014719] CPU: Physical Processor ID: 0
[ 0.014902] CPU: Processor Core ID: 0
[ 0.015085] mce: CPU supports 6 MCE banks
[ 0.015276] CPU0: Thermal monitoring enabled (TM2)
[ 0.015463] using mwait in idle threads.
[ 0.017454] ACPI: Core revision 20120320
[ 0.026679] ftrace: allocating 17789 entries in 70 pages
[ 0.037144] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072383] CPU0: Intel(R) Core(TM)2 Duo CPU T9550 @ 2.66GHz stepping 0a
[ 0.073329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.073329] ... version: 2
[ 0.073329] ... bit width: 40
[ 0.073329] ... generic registers: 2
[ 0.073329] ... value mask: 000000ffffffffff
[ 0.073329] ... max period: 000000007fffffff
[ 0.073329] ... fixed-purpose events: 3
[ 0.073329] ... event mask: 0000000700000003
[ 0.090159] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103340] Booting Node 0, Processors #1
[ 0.116747] Brought up 2 CPUs
[ 0.117122] Total of 2 processors activated (10644.25 BogoMIPS).
[ 0.120095] devtmpfs: initialized
[ 0.124078] PM: Registering ACPI NVS region [mem 0xbffaf000-0xbffdffff] (200704 bytes)
[ 0.124602] NET: Registered protocol family 16
[ 0.124970] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.125174] ACPI: bus type pci registered
[ 0.126667] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.126872] PCI: not using MMCONFIG
[ 0.127055] PCI: Using configuration type 1 for base access
[ 0.127941] bio: create slab <bio-0> at 0
[ 0.127941] ACPI: Added _OSI(Module Device)
[ 0.127941] ACPI: Added _OSI(Processor Device)
[ 0.127941] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.127941] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.131019] ACPI: EC: EC description table is found, configuring boot EC
[ 0.131210] ACPI: EC: Look up EC in DSDT
[ 0.133919] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.136747] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.140121] ACPI Warning: Incorrect checksum in table [ATKG] - 0x99, should be 0xF7 (20120320/tbutils-323)
[ 0.140929] ACPI: SSDT 00000000bffb73c0 0028A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.144269] ACPI: Dynamic OEM Table Load:
[ 0.144789] ACPI: SSDT (null) 0028A (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.145497] ACPI: SSDT 00000000bffb76e0 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.146700] ACPI: Dynamic OEM Table Load:
[ 0.147220] ACPI: SSDT (null) 00765 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.148019] ACPI: SSDT 00000000bffb72f0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.149128] ACPI: Dynamic OEM Table Load:
[ 0.149648] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.153606] ACPI: SSDT 00000000bffb7650 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.154702] ACPI: Dynamic OEM Table Load:
[ 0.155222] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.156007] ACPI: Interpreter enabled
[ 0.156663] ACPI: (supports S0 S3 S4 S5)
[ 0.157546] ACPI: Using IOAPIC for interrupt routing
[ 0.157761] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.158638] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.201611] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.202097] ACPI: No dock devices found.
[ 0.202285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.202778] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.203139] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.203326] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.203514] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.203717] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.203919] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 0.204125] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000d0000-0x000dffff] (conflicts with Adapter ROM [mem 0x000ce000-0x000d2bff])
[ 0.204377] PCI host bridge to bus 0000:00
[ 0.204562] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.204749] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.204935] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.205122] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
[ 0.205319] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.205345] DMAR: Forcing write-buffer flush capability
[ 0.205529] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.205744] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.205797] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.205862] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.205931] pci 0000:00:1a.0: reg 20: [io 0xbc00-0xbc1f]
[ 0.206014] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.206084] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f]
[ 0.206168] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.206237] pci 0000:00:1a.2: reg 20: [io 0xb800-0xb81f]
[ 0.206332] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.206364] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.206496] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.206538] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.206564] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.206710] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.206747] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.206868] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.206907] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.207027] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.207067] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.207189] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.207232] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.207352] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.207394] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.207463] pci 0000:00:1d.0: reg 20: [io 0xb480-0xb49f]
[ 0.207549] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.207618] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f]
[ 0.207700] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.207770] pci 0000:00:1d.2: reg 20: [io 0xb080-0xb09f]
[ 0.207866] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.207897] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.208030] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208063] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.208169] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.208348] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.208381] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
[ 0.208394] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
[ 0.208408] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
[ 0.208422] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
[ 0.208435] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa49f]
[ 0.208449] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
[ 0.208530] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.208645] pci 0000:01:00.0: [10de:062b] type 00 class 0x030000
[ 0.208696] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.208748] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.208794] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.208839] pci 0000:01:00.0: reg 24: [io 0xcc00-0xcc7f]
[ 0.208866] pci 0000:01:00.0: reg 30: [mem 0xfde80000-0xfdefffff pref]
[ 0.213361] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.213549] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.213553] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
[ 0.213559] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.213627] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.213954] pci 0000:03:00.0: [8086:4229] type 00 class 0x028000
[ 0.214003] pci 0000:03:00.0: reg 10: [mem 0xfdffe000-0xfdffffff 64bit]
[ 0.214222] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.220032] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.220225] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.220299] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.220488] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.220494] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
[ 0.220503] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
[ 0.220651] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
[ 0.220718] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.220834] pci 0000:06:00.0: reg 18: [mem 0xf8fff000-0xf8ffffff 64bit pref]
[ 0.220907] pci 0000:06:00.0: reg 20: [mem 0xf8fe0000-0xf8feffff 64bit pref]
[ 0.220954] pci 0000:06:00.0: reg 30: [mem 0xfeaf0000-0xfeafffff pref]
[ 0.221225] pci 0000:06:00.0: supports D1 D2
[ 0.221228] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.221408] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.221598] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.221604] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.221613] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.221667] pci 0000:07:01.0: [1180:0832] type 00 class 0x0c0010
[ 0.221685] pci 0000:07:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.221889] pci 0000:07:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.222107] pci 0000:07:01.0: reg 10: [mem 0xfebff800-0xfebfffff]
[ 0.222214] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.222241] pci 0000:07:01.1: [1180:0822] type 00 class 0x080500
[ 0.222266] pci 0000:07:01.1: reg 10: [mem 0xfebff400-0xfebff4ff]
[ 0.222372] pci 0000:07:01.1: supports D1 D2
[ 0.222375] pci 0000:07:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222402] pci 0000:07:01.2: [1180:0592] type 00 class 0x088000
[ 0.222427] pci 0000:07:01.2: reg 10: [mem 0xfebfec00-0xfebfecff]
[ 0.222534] pci 0000:07:01.2: supports D1 D2
[ 0.222537] pci 0000:07:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222563] pci 0000:07:01.3: [1180:0852] type 00 class 0x088000
[ 0.222588] pci 0000:07:01.3: reg 10: [mem 0xfebfe800-0xfebfe8ff]
[ 0.222694] pci 0000:07:01.3: supports D1 D2
[ 0.222697] pci 0000:07:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.222769] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.222964] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.222974] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.222977] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.222980] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.222983] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 0.223023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.223169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.223209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.223239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.223309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.223351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.223528] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.223985] pci0000:00: ACPI _OSC control (0x1d) granted
[ 0.234652] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.235399] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 12)
[ 0.235961] ACPI: PCI Interrupt Link [LNKC] (IRQs *6)
[ 0.236276] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 12)
[ 0.236902] ACPI: PCI Interrupt Link [LNKE] (IRQs 6) *0, disabled.
[ 0.237342] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 12)
[ 0.238029] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 12)
[ 0.238713] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 12)
[ 0.239424] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.239424] vgaarb: loaded
[ 0.239424] vgaarb: bridge control possible 0000:01:00.0
[ 0.239424] PCI: Using ACPI for IRQ routing
[ 0.251389] PCI: pci_cache_line_size set to 64 bytes
[ 0.251518] e820: reserve RAM buffer [mem 0x0009b400-0x0009ffff]
[ 0.251521] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[ 0.251647] NetLabel: Initializing
[ 0.251727] NetLabel: domain hash size = 128
[ 0.251807] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.251905] NetLabel: unlabeled traffic allowed by default
[ 0.252001] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.252090] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.252477] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.270004] Switching to clocksource hpet
[ 0.279081] pnp: PnP ACPI init
[ 0.279178] ACPI: bus type pnp registered
[ 0.279375] pnp 00:00: [bus 00-ff]
[ 0.279379] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.279382] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.279385] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.279388] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.279391] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.279394] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 0.279397] pnp 00:00: [mem 0x00000000-0xffffffff window]
[ 0.279472] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.279484] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.279553] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.279641] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.279677] pnp 00:02: [dma 4]
[ 0.279680] pnp 00:02: [io 0x0000-0x000f]
[ 0.279683] pnp 00:02: [io 0x0081-0x0083]
[ 0.279686] pnp 00:02: [io 0x0087]
[ 0.279689] pnp 00:02: [io 0x0089-0x008b]
[ 0.279691] pnp 00:02: [io 0x008f]
[ 0.279694] pnp 00:02: [io 0x00c0-0x00df]
[ 0.279726] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.279740] pnp 00:03: [io 0x0070-0x0071]
[ 0.279752] pnp 00:03: [irq 8]
[ 0.279787] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.279824] pnp 00:04: [io 0x0060]
[ 0.279827] pnp 00:04: [io 0x0064]
[ 0.279835] pnp 00:04: [irq 1]
[ 0.279868] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.279924] pnp 00:05: [irq 12]
[ 0.279968] pnp 00:05: Plug and Play ACPI device, IDs SYN0a0f SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.279980] pnp 00:06: [io 0x0061]
[ 0.280034] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.280046] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.280054] pnp 00:07: [irq 13]
[ 0.280090] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.280249] pnp 00:08: [io 0x0010-0x001f]
[ 0.280252] pnp 00:08: [io 0x0022-0x003f]
[ 0.280255] pnp 00:08: [io 0x0044-0x005f]
[ 0.280257] pnp 00:08: [io 0x0063]
[ 0.280260] pnp 00:08: [io 0x0065]
[ 0.280263] pnp 00:08: [io 0x0067-0x006f]
[ 0.280266] pnp 00:08: [io 0x0072-0x007f]
[ 0.280268] pnp 00:08: [io 0x0080]
[ 0.280271] pnp 00:08: [io 0x0084-0x0086]
[ 0.280274] pnp 00:08: [io 0x0088]
[ 0.280276] pnp 00:08: [io 0x008c-0x008e]
[ 0.280279] pnp 00:08: [io 0x0090-0x009f]
[ 0.280282] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.280285] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.280287] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.280293] pnp 00:08: [io 0x0800-0x087f]
[ 0.280296] pnp 00:08: [io 0x0400-0x041f]
[ 0.280299] pnp 00:08: [io 0x0500-0x057f]
[ 0.280302] pnp 00:08: [mem 0xf9ffec00-0xf9ffecff window]
[ 0.280305] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.280308] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.280311] pnp 00:08: [mem 0xfed45000-0xfed89fff]
[ 0.280314] pnp 00:08: [mem 0xfed90000-0xfed90fff]
[ 0.280317] pnp 00:08: [mem 0xfed91000-0xfed91fff]
[ 0.280319] pnp 00:08: [mem 0xfed92000-0xfed92fff]
[ 0.280322] pnp 00:08: [mem 0xfed93000-0xfed93fff]
[ 0.280325] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.280328] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.280431] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.280516] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.280601] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.280685] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.280769] system 00:08: [mem 0xf9ffec00-0xf9ffecff window] has been reserved
[ 0.280868] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.280953] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.281039] system 00:08: [mem 0xfed45000-0xfed89fff] has been reserved
[ 0.281124] system 00:08: [mem 0xfed90000-0xfed90fff] has been reserved
[ 0.281209] system 00:08: [mem 0xfed91000-0xfed91fff] has been reserved
[ 0.281298] system 00:08: [mem 0xfed92000-0xfed92fff] has been reserved
[ 0.281383] system 00:08: [mem 0xfed93000-0xfed93fff] has been reserved
[ 0.281468] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.281554] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.281641] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281708] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.281748] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.281803] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.281806] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.281809] pnp 00:0a: [mem 0xfec10000-0xfec17fff]
[ 0.281812] pnp 00:0a: [mem 0xfec18000-0xfec1ffff]
[ 0.281815] pnp 00:0a: [mem 0xfec20000-0xfec27fff]
[ 0.281817] pnp 00:0a: [mem 0xfec38000-0xfec3ffff]
[ 0.281820] pnp 00:0a: [io 0x0250-0x0253]
[ 0.281823] pnp 00:0a: [io 0x0256-0x025f]
[ 0.281887] system 00:0a: [io 0x0250-0x0253] has been reserved
[ 0.281972] system 00:0a: [io 0x0256-0x025f] has been reserved
[ 0.282057] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.282142] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.282227] system 00:0a: [mem 0xfec10000-0xfec17fff] has been reserved
[ 0.282313] system 00:0a: [mem 0xfec18000-0xfec1ffff] has been reserved
[ 0.282398] system 00:0a: [mem 0xfec20000-0xfec27fff] has been reserved
[ 0.282483] system 00:0a: [mem 0xfec38000-0xfec3ffff] has been reserved
[ 0.282570] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282730] pnp 00:0b: [io 0x0300-0x0307]
[ 0.282739] pnp 00:0b: [irq 4]
[ 0.282797] pnp 00:0b: Plug and Play ACPI device, IDs ITE8708 (active)
[ 0.282845] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.282904] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.282991] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283409] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.283413] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 0.283416] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 0.283419] pnp 00:0d: [mem 0x00100000-0xbfffffff]
[ 0.283422] pnp 00:0d: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.283507] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.283594] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.283680] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.283765] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.283853] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.284016] pnp: PnP ACPI: found 14 devices
[ 0.284097] ACPI: ACPI bus type pnp unregistered
[ 0.291935] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.292021] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.292107] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfdefffff]
[ 0.292193] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.292295] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.292391] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.292479] pci 0000:00:1c.1: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.292572] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.292657] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.292745] pci 0000:00:1c.2: bridge window [mem 0xfe000000-0xfe9fffff]
[ 0.292833] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf8efffff 64bit pref]
[ 0.292938] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
[ 0.293023] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.293111] pci 0000:00:1c.5: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.293199] pci 0000:00:1c.5: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.293304] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
[ 0.293411] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.293558] pci 0000:00:1e.0: setting latency timer to 64
[ 0.293564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.293567] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.293570] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.293573] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.293576] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.293579] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfdefffff]
[ 0.293582] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.293586] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.293589] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.293592] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe9fffff]
[ 0.293595] pci_bus 0000:04: resource 2 [mem 0xf6000000-0xf8efffff 64bit pref]
[ 0.293598] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.293601] pci_bus 0000:06: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.293604] pci_bus 0000:06: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.293607] pci_bus 0000:07: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.293611] pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
[ 0.293614] pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
[ 0.293617] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.293620] pci_bus 0000:07: resource 7 [mem 0xc0000000-0xffffffff]
[ 0.293663] NET: Registered protocol family 2
[ 0.293910] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.295244] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.299318] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.299932] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.300048] TCP: reno registered
[ 0.300139] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300265] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.300490] NET: Registered protocol family 1
[ 0.300913] pci 0000:01:00.0: Boot video device
[ 0.300940] PCI: CLS 32 bytes, default 64
[ 0.301007] Unpacking initramfs...
[ 0.424567] Freeing initrd memory: 4168k freed
[ 0.426124] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.426210] software IO TLB [mem 0xbbf9a000-0xbff99fff] (64MB) mapped at [ffff8800bbf9a000-ffff8800bff99fff]
[ 0.426338] Simple Boot Flag at 0x51 set to 0x1
[ 0.426993] audit: initializing netlink socket (disabled)
[ 0.427091] type=2000 audit(1342468827.426:1): initialized
[ 0.427821] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.430689] VFS: Disk quotas dquot_6.5.2
[ 0.430832] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.431045] msgmni has been set to 7910
[ 0.431387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.431526] io scheduler noop registered
[ 0.431610] io scheduler deadline registered
[ 0.431763] io scheduler cfq registered (default)
[ 0.432014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.432183] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.432360] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.432544] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.432735] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.432884] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.432971] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.433057] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.433085] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.433174] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.433200] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.433286] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.433391] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.433424] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.433513] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.433540] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.433626] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 0.433714] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.433842] intel_idle: does not run on family 6 model 23
[ 0.433887] GHES: HEST is not enabled!
[ 0.434047] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.434722] Linux agpgart interface v0.103
[ 0.434910] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.437573] i8042: Detected active multiplexing controller, rev 1.1
[ 0.439848] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.439971] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.440107] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.440220] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.440335] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.440554] mousedev: PS/2 mouse device common for all mice
[ 0.440722] rtc_cmos 00:03: RTC can wake from S4
[ 0.440975] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.441090] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.441185] cpuidle: using governor ladder
[ 0.441266] cpuidle: using governor menu
[ 0.441493] drop_monitor: Initializing network drop monitor service
[ 0.441673] TCP: cubic registered
[ 0.441892] NET: Registered protocol family 10
[ 0.442220] NET: Registered protocol family 17
[ 0.442311] Key type dns_resolver registered
[ 0.442558] PM: Hibernation image not present or could not be loaded.
[ 0.442565] registered taskstats version 1
[ 0.444728] rtc_cmos 00:03: setting system clock to 2012-07-16 20:00:28 UTC (1342468828)
[ 0.446414] Freeing unused kernel memory: 756k freed
[ 0.446797] Write protecting the kernel read-only data: 8192k
[ 0.453587] Freeing unused kernel memory: 1564k freed
[ 0.456945] Freeing unused kernel memory: 632k freed
[ 0.467195] systemd-udevd[40]: starting version 186
[ 0.478009] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.510618] ACPI: bus type usb registered
[ 0.510745] usbcore: registered new interface driver usbfs
[ 0.510846] usbcore: registered new interface driver hub
[ 0.510983] usbcore: registered new device driver usb
[ 0.512138] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.512304] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.512309] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.512403] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.512542] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.516630] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.516657] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.520373] SCSI subsystem initialized
[ 0.520566] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.523070] libata version 3.00 loaded.
[ 0.526749] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.527067] hub 1-0:1.0: USB hub found
[ 0.527155] hub 1-0:1.0: 6 ports detected
[ 0.527528] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.527533] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.527622] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 0.527767] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000bc00
[ 0.528175] hub 2-0:1.0: USB hub found
[ 0.528263] hub 2-0:1.0: 2 ports detected
[ 0.528470] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.528475] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.528602] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 0.528738] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.529049] hub 3-0:1.0: USB hub found
[ 0.529134] hub 3-0:1.0: 2 ports detected
[ 0.529321] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.529326] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.529414] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[ 0.529548] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000b800
[ 0.529960] hub 4-0:1.0: USB hub found
[ 0.530082] hub 4-0:1.0: 2 ports detected
[ 0.530270] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.530275] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.530363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.530500] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480
[ 0.531019] hub 5-0:1.0: USB hub found
[ 0.531103] hub 5-0:1.0: 2 ports detected
[ 0.531289] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.531294] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.531382] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.531506] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.531751] hub 6-0:1.0: USB hub found
[ 0.531835] hub 6-0:1.0: 2 ports detected
[ 0.532016] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.532021] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.532111] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.532236] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b080
[ 0.532568] hub 7-0:1.0: USB hub found
[ 0.532652] hub 7-0:1.0: 2 ports detected
[ 0.532973] ahci 0000:00:1f.2: version 3.0
[ 0.533054] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.533110] ahci: SSS flag set, parallel bus scan disabled
[ 0.533233] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
[ 0.533359] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ccc ems sxs
[ 0.533465] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.556598] scsi0 : ahci
[ 0.559515] scsi1 : ahci
[ 0.559695] scsi2 : ahci
[ 0.559878] scsi3 : ahci
[ 0.560105] scsi4 : ahci
[ 0.560304] scsi5 : ahci
[ 0.560720] ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 45
[ 0.560830] ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 45
[ 0.560934] ata3: DUMMY
[ 0.561016] ata4: DUMMY
[ 0.561095] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 45
[ 0.561198] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 45
[ 0.561868] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.561873] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.561962] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 0.562095] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.566063] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.566072] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.573358] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.573607] hub 8-0:1.0: USB hub found
[ 0.573696] hub 8-0:1.0: 6 ports detected
[ 0.833362] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 0.880035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.880955] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 0.890241] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 0.900370] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 0.957072] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 9
[ 0.957175] usb 1-4: config 1 interface 0 altsetting 0 endpoint 0x2 has an invalid bInterval 0, changing to 9
[ 0.981121] ata1.00: ATA-8: ST9320421AS, SD14, max UDMA/133
[ 0.981206] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 0.995334] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.004583] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.015892] ata1.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.046767] ata1.00: configured for UDMA/133
[ 1.046993] scsi 0:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5
[ 1.170027] usb 8-5: new high-speed USB device number 2 using ehci_hcd
[ 1.366702] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.371428] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.371885] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.375623] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR07, max UDMA/133
[ 1.381486] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 1.381949] ata2.00: ACPI cmd ef/90:03:00:00:00:a0 (SET FEATURES) succeeded
[ 1.385688] ata2.00: configured for UDMA/133
[ 1.426691] Refined TSC clocksource calibration: 2659.999 MHz.
[ 1.426777] Switching to clocksource tsc
[ 1.525889] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR07 PQ: 0 ANSI: 5
[ 1.690015] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 1.843356] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.919788] ata5.00: ATA-8: ST9320421AS, SD14, max UDMA/133
[ 1.919872] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.963823] ata5.00: configured for UDMA/133
[ 1.963994] scsi 4:0:0:0: Direct-Access ATA ST9320421AS SD14 PQ: 0 ANSI: 5
[ 2.283356] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.284352] usbcore: registered new interface driver usbhid
[ 2.284436] usbhid: USB HID core driver
[ 2.288134] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.288282] sd 4:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.288455] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.288540] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.288574] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.288759] sd 0:0:0:0: [sda] Write Protect is off
[ 2.288843] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.288908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.368122] sda: sda1 sda2 < >
[ 2.368548] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.378622] sdb: sdb1 < > sdb2
[ 2.379040] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.397828] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.397927] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.398201] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.424766] md: bind<sdb>
[ 2.424942] md: md127 stopped.
[ 2.425027] md: unbind<sdb>
[ 2.426705] md: export_rdev(sdb)
[ 2.429831] md: bind<sda>
[ 2.430028] md: md127 stopped.
[ 2.430111] md: unbind<sda>
[ 2.430508] md: export_rdev(sda)
[ 2.872400] device-mapper: uevent: version 1.0.3
[ 2.872576] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 18.364401] md: md127 stopped.
[ 18.368666] md: bind<sdb>
[ 18.369220] md: bind<sda>
[ 18.595058] md: md126 stopped.
[ 18.595527] md: bind<sdb>
[ 18.595827] md: bind<sda>
[ 18.597219] md: raid0 personality registered for level 0
[ 18.597448] bio: create slab <bio-1> at 1
[ 18.597534] md/raid0:md126: md_size is 1250275328 sectors.
[ 18.597617] md: RAID0 configuration for md126 - 1 zone
[ 18.597698] md: zone0=[sda/sdb]
[ 18.597961] zone-offset= 0KB, device-offset= 0KB, size= 625137920KB
[ 18.599244]
[ 18.599326] md126: detected capacity change from 0 to 640140967936
[ 19.107189] md126: p1 p2 < p5 p6 >
[ 59.111047] EXT4-fs (dm-8): INFO: recovery required on readonly filesystem
[ 59.111136] EXT4-fs (dm-8): write access will be enabled during recovery
[ 59.260917] EXT4-fs (dm-8): recovery complete
[ 59.269459] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 60.892276] systemd-udevd[246]: starting version 186
[ 61.476352] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 61.548583] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 61.549242] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 61.576257] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 61.576366] ACPI: Sleep Button [SLPB]
[ 61.576518] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 61.580944] ACPI: Lid Switch [LID]
[ 61.581145] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 61.581315] ACPI: Power Button [PWRF]
[ 61.620736] ACPI: Requesting acpi_cpufreq
[ 61.711227] [drm] Initialized drm 1.1.0 20060810
[ 61.735679] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 61.757852] Monitor-Mwait will be used to enter C-1 state
[ 61.757886] Monitor-Mwait will be used to enter C-2 state
[ 61.757916] Monitor-Mwait will be used to enter C-3 state
[ 61.757924] Marking TSC unstable due to TSC halts in idle
[ 61.758028] ACPI: acpi_idle registered with cpuidle
[ 61.758069] Switching to clocksource hpet
[ 61.760286] ACPI: Battery Slot [BAT0] (battery present)
[ 61.761968] ACPI Warning: 0x0000000000000830-0x0000000000000833 SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 61.762209] ACPI Warning: 0x0000000000000830-0x0000000000000833 SystemIO conflicts with Region \_SB_.PCI0.SBRG.SMIE 2 (20120320/utaddress-251)
[ 61.762438] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 61.762539] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 61.762625] ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 61.762852] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 61.762955] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 61.763181] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 61.763282] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 61.777554] ACPI: AC Adapter [AC0] (off-line)
[ 61.785426] Linux media interface: v0.10
[ 61.785610] thermal LNXTHERM:00: registered as thermal_zone0
[ 61.785695] ACPI: Thermal Zone [THRM] (55 C)
[ 61.790628] acpi device:1d: registered as cooling_device2
[ 61.790752] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 61.790898] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input5
[ 61.833013] Linux video capture interface: v2.00
[ 61.843427] firewire_ohci 0000:07:01.0: added OHCI v1.0 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 62.159446] sdhci: Secure Digital Host Controller Interface driver
[ 62.159537] sdhci: Copyright(c) Pierre Ossman
[ 62.233803] r592: driver successfully loaded
[ 62.234507] sdhci-pci 0000:07:01.1: SDHCI controller found [1180:0822] (rev 22)
[ 62.234651] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.235761] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.235899] Registered led device: mmc0::
[ 62.257814] Bluetooth: Core ver 2.16
[ 62.257911] NET: Registered protocol family 31
[ 62.257996] Bluetooth: HCI device and connection manager initialized
[ 62.258082] Bluetooth: HCI socket layer initialized
[ 62.258168] Bluetooth: L2CAP socket layer initialized
[ 62.258261] Bluetooth: SCO socket layer initialized
[ 62.260043] mmc0: SDHCI controller on PCI [0000:07:01.1] using DMA
[ 62.290411] asus_laptop: Asus Laptop Support version 0.42
[ 62.290648] asus_laptop: G50VT model detected
[ 62.291014] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.291119] asus_laptop: Backlight controlled by ACPI video driver
[ 62.291416] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input6
[ 62.292201] Registered led device: asus::touchpad
[ 62.329903] r852: driver loaded successfully
[ 62.343443] firewire_core 0000:07:01.0: created device fw0: GUID 001e8c0001d154e0, S400
[ 62.344538] asus_oled: module is from the staging directory, the quality is unknown, you have been warned.
[ 62.344933] asus-oled 1-4:1.0: Attached Asus OLED device: G50 [width 256, pack_mode 1]
[ 62.345057] usbcore: registered new interface driver asus-oled
[ 62.347480] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.352766] ite_cir: Auto-detected model: ITE8708 CIR transceiver
[ 62.352850] ite_cir: Using model: ITE8708 CIR transceiver
[ 62.352940] ite_cir: TX-capable: 1
[ 62.353036] ite_cir: Sample period (ns): 8680
[ 62.353125] ite_cir: TX carrier frequency (Hz): 38000
[ 62.353213] ite_cir: TX duty cycle (%): 33
[ 62.353298] ite_cir: RX low carrier frequency (Hz): 0
[ 62.353409] ite_cir: RX high carrier frequency (Hz): 0
[ 62.392044] usbcore: registered new interface driver btusb
[ 62.400020] Registered IR keymap rc-rc6-mce
[ 62.400202] input: ITE8708 CIR transceiver as /devices/virtual/rc/rc0/input7
[ 62.400735] rc0: ITE8708 CIR transceiver as /devices/virtual/rc/rc0
[ 62.401914] ite_cir: driver has been successfully loaded
[ 62.404205] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.419606] uvcvideo: Found UVC 1.00 device USB 2.0 UVC 2.0M WebCam (064e:a115)
[ 62.436350] input: USB 2.0 UVC 2.0M WebCam as /devices/pci0000:00/0000:00:1d.7/usb8/8-5/8-5:1.0/input/input8
[ 62.436534] usbcore: registered new interface driver uvcvideo
[ 62.436617] USB Video Class driver (1.1.1)
[ 62.460749] sdhci-pci 0000:07:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 62.486046] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 62.486252] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
[ 62.486399] r8169 0000:06:00.0: eth0: RTL8168c/8111c at 0xffffc9000066a000, 00:24:8c:67:ae:b6, XID 1c4000c0 IRQ 46
[ 62.486498] r8169 0000:06:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 62.653106] IR NEC protocol handler initialized
[ 62.658764] wmi: Mapper loaded
[ 62.700769] IR RC5(x) protocol handler initialized
[ 62.703186] IR RC6 protocol handler initialized
[ 62.708103] IR JVC protocol handler initialized
[ 62.721484] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 62.753920] IR Sony protocol handler initialized
[ 62.811490] cfg80211: Calling CRDA to update world regulatory domain
[ 62.920329] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000/0x0
[ 62.959162] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 63.049490] hda_codec: ALC663: SKU not ready 0x598301f0
[ 63.051655] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 63.066250] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 63.066469] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 63.066641] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 63.072890] IR SANYO protocol handler initialized
[ 63.417558] input: MCE IR Keyboard/Mouse (ite-cir) as /devices/virtual/input/input14
[ 63.417810] IR MCE Keyboard/mouse protocol handler initialized
[ 63.443205] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x094580a1)
[ 63.446681] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 63.529144] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 63.529224] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 63.529305] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 63.529384] [drm] nouveau 0000:01:00.0: Bios version 62.94.3c.00
[ 63.529465] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 63.529735] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 63.529820] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 63.529899] [drm] nouveau 0000:01:00.0: DCB outp 00: 01010323 00010034
[ 63.529981] [drm] nouveau 0000:01:00.0: DCB outp 01: 02001300 00000028
[ 63.530078] [drm] nouveau 0000:01:00.0: DCB outp 02: 02022332 00020010
[ 63.530159] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[ 63.530297] [drm] nouveau 0000:01:00.0: DCB conn 01: 00000100
[ 63.530435] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001231
[ 63.530572] [drm] nouveau 0000:01:00.0: DCB conn 03: 00000310
[ 63.530710] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000311
[ 63.532021] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000313
[ 63.532161] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCE71
[ 63.557590] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD262
[ 63.560553] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE22B
[ 63.560655] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE374
[ 63.561830] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE5DC
[ 63.561925] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE641
[ 63.582023] [drm] nouveau 0000:01:00.0: 0xE641: Condition still not met after 20ms, skipping following opcodes
[ 63.584371] [TTM] Zone kernel: Available graphics memory: 2026580 kiB
[ 63.584476] [TTM] Initializing pool allocator
[ 63.584567] [TTM] Initializing DMA pool allocator
[ 63.584665] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (GDDR3)
[ 63.584759] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 63.584879] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 63.599936] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 63.600046] [drm] No driver support for vblank timestamp query.
[ 63.600140] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 63.605385] [drm] nouveau 0000:01:00.0: 4 available performance level(s)
[ 63.605478] [drm] nouveau 0000:01:00.0: 0: core 169MHz shader 338MHz memory 100MHz voltage 900mV fanspeed 100%
[ 63.605588] [drm] nouveau 0000:01:00.0: 1: core 275MHz shader 550MHz memory 300MHz voltage 900mV fanspeed 100%
[ 63.605698] [drm] nouveau 0000:01:00.0: 2: core 400MHz shader 800MHz memory 300MHz voltage 900mV fanspeed 100%
[ 63.605808] [drm] nouveau 0000:01:00.0: 3: core 530MHz shader 1325MHz memory 799MHz voltage 1110mV fanspeed 100%
[ 63.605918] [drm] nouveau 0000:01:00.0: c: core 275MHz shader 550MHz memory 300MHz voltage 900mV
[ 63.620053] [drm] nouveau 0000:01:00.0: MM: using CRYPT for buffer copies
[ 63.680423] lirc_dev: IR Remote Control driver registered, major 248
[ 63.738684] rc rc0: lirc_dev: driver ir-lirc-codec (ite-cir) registered at minor = 0
[ 63.739206] IR LIRC bridge handler initialized
[ 63.993473] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 63.993882] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 63.994339] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 64.036948] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 64.037330] iwl4965 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 64.038046] iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X
[ 64.070255] cfg80211: World regulatory domain updated:
[ 64.070601] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 64.071138] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.071662] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 64.072184] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 64.072715] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.073235] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.073767] cfg80211: Calling CRDA for country: US
[ 64.075783] cfg80211: Regulatory domain changed to country: US
[ 64.076143] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 64.076699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 64.077227] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 64.077752] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.078277] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.078805] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 64.079329] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 64.215244] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[ 64.215470] Registered led device: phy0-led
[ 64.413770] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 65.064156] [drm] nouveau 0000:01:00.0: allocated 1680x1050 fb: 0x2c0000, bo ffff8801338e8400
[ 65.064386] fbcon: nouveaufb (fb0) is primary device
[ 65.382149] Console: switching to colour frame buffer device 210x65
[ 65.385360] fb0: nouveaufb frame buffer device
[ 65.385372] drm: registered panic notifier
[ 65.385390] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 66.380456] EXT4-fs (dm-8): re-mounted. Opts: (null)
[ 66.566461] EXT4-fs (md126p5): mounted filesystem with ordered data mode. Opts: (null)
[ 66.590656] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 66.656314] Adding 4194300k swap on /dev/mapper/saphira0-swap. Priority:-1 extents:1 across:4194300k
[ 69.507919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 72.247059] wlan0: authenticate with 00:16:01:90:d4:94
[ 72.256080] wlan0: send auth to 00:16:01:90:d4:94 (try 1/3)
[ 72.257984] wlan0: authenticated
[ 72.270009] wlan0: associate with 00:16:01:90:d4:94 (try 1/3)
[ 72.272302] wlan0: RX AssocResp from 00:16:01:90:d4:94 (capab=0x431 status=0 aid=2)
[ 72.272306] wlan0: associated
[ 72.300082] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 105.828074] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
*** START X HERE ***
[ 191.240623] [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x40000000 - Ch 1
Raw
Xorg.0.log
[ 190.421]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 190.422] X Protocol Version 11, Revision 0
[ 190.422] Build Operating System: Linux 3.4.4-3-ARCH x86_64
[ 190.422] Current Operating System: Linux saphira 3.5.0-rc7-ARCH-00027-g8772d16 #1 SMP PREEMPT Mon Jul 16 19:21:24 CDT 2012 x86_64
[ 190.422] Kernel command line: root=UUID=89ccd806-db3e-49d2-a338-5efb0c5829dc ro initrd=../initramfs-linux-git.img BOOT_IMAGE=../vmlinuz-linux-git
[ 190.423] Build Date: 09 July 2012 03:59:39PM
[ 190.423]
[ 190.424] Current version of pixman: 0.26.2
[ 190.424] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 190.424] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 190.426] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 16 20:03:38 2012
[ 190.497] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 190.525] (==) No Layout section. Using the first Screen section.
[ 190.525] (==) No screen section available. Using defaults.
[ 190.525] (**) |-->Screen "Default Screen Section" (0)
[ 190.526] (**) | |-->Monitor "<default monitor>"
[ 190.526] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 190.526] (**) | |-->Device "nvidia card"
[ 190.526] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 190.526] (==) Automatically adding devices
[ 190.526] (==) Automatically enabling devices
[ 190.578] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 190.578] Entry deleted from font path.
[ 190.589] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 190.589] Entry deleted from font path.
[ 190.589] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 190.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 190.590] Entry deleted from font path.
[ 190.590] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 190.590] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 190.590] Entry deleted from font path.
[ 190.590] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 190.590] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 190.590] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 190.591] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 190.591] (II) Loader magic: 0x7c8b00
[ 190.591] (II) Module ABI versions:
[ 190.591] X.Org ANSI C Emulation: 0.4
[ 190.591] X.Org Video Driver: 12.0
[ 190.591] X.Org XInput driver : 16.0
[ 190.591] X.Org Server Extension : 6.0
[ 190.593] (--) PCI:*(0:1:0:0) 10de:062b:1043:1992 rev 161, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/524288
[ 190.593] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 190.594] (II) LoadModule: "extmod"
[ 190.607] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 190.609] (II) Module extmod: vendor="X.Org Foundation"
[ 190.609] compiled for 1.12.3, module version = 1.0.0
[ 190.609] Module class: X.Org Server Extension
[ 190.609] ABI class: X.Org Server Extension, version 6.0
[ 190.609] (II) Loading extension MIT-SCREEN-SAVER
[ 190.609] (II) Loading extension XFree86-VidModeExtension
[ 190.609] (II) Loading extension XFree86-DGA
[ 190.609] (II) Loading extension DPMS
[ 190.609] (II) Loading extension XVideo
[ 190.609] (II) Loading extension XVideo-MotionCompensation
[ 190.609] (II) Loading extension X-Resource
[ 190.609] (II) LoadModule: "dbe"
[ 190.609] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 190.610] (II) Module dbe: vendor="X.Org Foundation"
[ 190.610] compiled for 1.12.3, module version = 1.0.0
[ 190.610] Module class: X.Org Server Extension
[ 190.610] ABI class: X.Org Server Extension, version 6.0
[ 190.610] (II) Loading extension DOUBLE-BUFFER
[ 190.610] (II) LoadModule: "glx"
[ 190.610] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 190.617] (II) Module glx: vendor="X.Org Foundation"
[ 190.617] compiled for 1.12.3, module version = 1.0.0
[ 190.617] ABI class: X.Org Server Extension, version 6.0
[ 190.617] (==) AIGLX enabled
[ 190.617] (II) Loading extension GLX
[ 190.617] (II) LoadModule: "record"
[ 190.617] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 190.618] (II) Module record: vendor="X.Org Foundation"
[ 190.618] compiled for 1.12.3, module version = 1.13.0
[ 190.618] Module class: X.Org Server Extension
[ 190.618] ABI class: X.Org Server Extension, version 6.0
[ 190.618] (II) Loading extension RECORD
[ 190.618] (II) LoadModule: "dri"
[ 190.618] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 190.630] (II) Module dri: vendor="X.Org Foundation"
[ 190.630] compiled for 1.12.3, module version = 1.0.0
[ 190.630] ABI class: X.Org Server Extension, version 6.0
[ 190.630] (II) Loading extension XFree86-DRI
[ 190.630] (II) LoadModule: "dri2"
[ 190.630] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 190.630] (II) Module dri2: vendor="X.Org Foundation"
[ 190.630] compiled for 1.12.3, module version = 1.2.0
[ 190.630] ABI class: X.Org Server Extension, version 6.0
[ 190.630] (II) Loading extension DRI2
[ 190.631] (II) LoadModule: "nouveau"
[ 190.631] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 190.660] (II) Module nouveau: vendor="X.Org Foundation"
[ 190.660] compiled for 1.12.3, module version = 1.0.1
[ 190.660] Module class: X.Org Video Driver
[ 190.660] ABI class: X.Org Video Driver, version 12.0
[ 190.660] (II) NOUVEAU driver Date: Fri Jul 6 16:23:50 2012 +1000
[ 190.660] (II) NOUVEAU driver for NVIDIA chipset families :
[ 190.660] RIVA TNT (NV04)
[ 190.660] RIVA TNT2 (NV05)
[ 190.660] GeForce 256 (NV10)
[ 190.660] GeForce 2 (NV11, NV15)
[ 190.660] GeForce 4MX (NV17, NV18)
[ 190.660] GeForce 3 (NV20)
[ 190.660] GeForce 4Ti (NV25, NV28)
[ 190.660] GeForce FX (NV3x)
[ 190.660] GeForce 6 (NV4x)
[ 190.660] GeForce 7 (G7x)
[ 190.660] GeForce 8 (G8x)
[ 190.660] GeForce GTX 200 (NVA0)
[ 190.660] GeForce GTX 400 (NVC0)
[ 190.660] (--) using VT number 7
[ 190.663] drmOpenDevice: node name is /dev/dri/card0
[ 190.663] drmOpenDevice: open result is 9, (OK)
[ 190.663] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 190.663] drmOpenDevice: node name is /dev/dri/card0
[ 190.663] drmOpenDevice: open result is 9, (OK)
[ 190.663] drmOpenByBusid: drmOpenMinor returns 9
[ 190.663] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 190.663] (II) [drm] nouveau interface version: 1.0.0
[ 190.663] (II) Loading sub module "dri"
[ 190.663] (II) LoadModule: "dri"
[ 190.663] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 190.664] (II) Module dri: vendor="X.Org Foundation"
[ 190.664] compiled for 1.12.3, module version = 1.0.0
[ 190.664] ABI class: X.Org Server Extension, version 6.0
[ 190.664] (II) NOUVEAU(0): Loaded DRI module
[ 190.664] drmOpenDevice: node name is /dev/dri/card0
[ 190.664] drmOpenDevice: open result is 10, (OK)
[ 190.664] drmOpenDevice: node name is /dev/dri/card0
[ 190.664] drmOpenDevice: open result is 10, (OK)
[ 190.664] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 190.664] drmOpenDevice: node name is /dev/dri/card0
[ 190.664] drmOpenDevice: open result is 10, (OK)
[ 190.664] drmOpenByBusid: drmOpenMinor returns 10
[ 190.664] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 190.664] (II) [drm] DRM interface version 1.4
[ 190.664] (II) [drm] DRM open master succeeded.
[ 190.664] (--) NOUVEAU(0): Chipset: "NVIDIA NV94"
[ 190.664] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 190.664] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 190.664] (==) NOUVEAU(0): RGB weight 888
[ 190.664] (==) NOUVEAU(0): Default visual is TrueColor
[ 190.664] (**) NOUVEAU(0): Option "GLXVBlank" "true"
[ 190.664] (==) NOUVEAU(0): Using HW cursor
[ 190.664] (**) NOUVEAU(0): GLX sync to VBlank enabled.
[ 190.664] (==) NOUVEAU(0): Page flipping enabled
[ 190.664] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 190.709] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 190.801] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 190.803] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 190.834] (II) NOUVEAU(0): EDID for output LVDS-1
[ 190.834] (II) NOUVEAU(0): Manufacturer: SEC Model: 3446 Serial#: 0
[ 190.834] (II) NOUVEAU(0): Year: 2007 Week: 0
[ 190.834] (II) NOUVEAU(0): EDID Version: 1.3
[ 190.834] (II) NOUVEAU(0): Digital Display Input
[ 190.834] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 190.834] (II) NOUVEAU(0): Gamma: 2.20
[ 190.834] (II) NOUVEAU(0): No DPMS capabilities specified
[ 190.834] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 190.834] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 190.834] (II) NOUVEAU(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 190.834] (II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 190.834] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 190.834] (II) NOUVEAU(0): Supported detailed timing:
[ 190.834] (II) NOUVEAU(0): clock: 121.0 MHz Image Size: 331 x 207 mm
[ 190.834] (II) NOUVEAU(0): h_active: 1680 h_sync: 1704 h_sync_end 1792 h_blank_end 1876 h_border: 0
[ 190.834] (II) NOUVEAU(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
[ 190.834] (II) NOUVEAU(0): Unknown vendor-specific block f
[ 190.834] (II) NOUVEAU(0): SAMSUNG
[ 190.834] (II) NOUVEAU(0): LTN154P3-L02
[ 190.834] (II) NOUVEAU(0): EDID (in hex):
[ 190.834] (II) NOUVEAU(0): 00ffffffffffff004ca3463400000000
[ 190.834] (II) NOUVEAU(0): 00110103802115780a87f594574f8c27
[ 190.834] (II) NOUVEAU(0): 27505400000001010101010101010101
[ 190.834] (II) NOUVEAU(0): 010101010101442f90c4601a0f401858
[ 190.834] (II) NOUVEAU(0): 13004bcf100000190000000f00000000
[ 190.834] (II) NOUVEAU(0): 00000000003cd2026400000000fe0053
[ 190.834] (II) NOUVEAU(0): 414d53554e470a2020202020000000fe
[ 190.834] (II) NOUVEAU(0): 004c544e31353450332d4c30320a007f
[ 190.834] (II) NOUVEAU(0): EDID vendor "SEC", prod id 13382
[ 190.834] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 190.834] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 121.00 1680 1704 1792 1876 1050 1051 1054 1065 -hsync -vsync (64.5 kHz eP)
[ 190.834] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 190.834] (II) NOUVEAU(0): Modeline "1680x1050"x60.6 121.00 1680 1704 1792 1876 1050 1051 1054 1065 -hsync -vsync (64.5 kHz eP)
[ 190.834] (II) NOUVEAU(0): Modeline "1680x1050"x60.9 148.75 1680 1784 1960 2240 1050 1053 1059 1090 -hsync +vsync (66.4 kHz e)
[ 190.834] (II) NOUVEAU(0): Modeline "1400x1050"x60.9 123.75 1400 1488 1632 1864 1050 1053 1057 1090 -hsync +vsync (66.4 kHz e)
[ 190.834] (II) NOUVEAU(0): Modeline "1280x1024"x60.9 110.75 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (64.7 kHz e)
[ 190.834] (II) NOUVEAU(0): Modeline "1280x960"x60.9 103.00 1280 1360 1488 1696 960 963 967 997 -hsync +vsync (60.7 kHz e)
[ 190.834] (II) NOUVEAU(0): Modeline "1152x864"x60.8 83.00 1152 1216 1336 1520 864 867 871 898 -hsync +vsync (54.6 kHz e)
[ 190.834] (II) NOUVEAU(0): Modeline "1024x768"x60.8 65.25 1024 1080 1184 1344 768 771 775 798 -hsync +vsync (48.5 kHz e)
[ 190.835] (II) NOUVEAU(0): Modeline "800x600"x60.6 38.75 800 832 912 1024 600 603 607 624 -hsync +vsync (37.8 kHz e)
[ 190.835] (II) NOUVEAU(0): Modeline "640x480"x60.6 24.25 640 664 720 800 480 483 487 500 -hsync +vsync (30.3 kHz e)
[ 190.835] (II) NOUVEAU(0): Modeline "720x400"x60.9 22.75 720 744 808 896 400 403 413 417 -hsync +vsync (25.4 kHz e)
[ 190.835] (II) NOUVEAU(0): Modeline "640x400"x60.7 20.25 640 664 720 800 400 403 409 417 -hsync +vsync (25.3 kHz e)
[ 190.835] (II) NOUVEAU(0): Modeline "640x350"x60.6 17.75 640 664 720 800 350 353 363 366 -hsync +vsync (22.2 kHz e)
[ 190.927] (II) NOUVEAU(0): EDID for output VGA-1
[ 190.929] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 190.929] (II) NOUVEAU(0): Output LVDS-1 connected
[ 190.929] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 190.929] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[ 190.929] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 190.929] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1680x1050
[ 190.929] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 190.929] (--) NOUVEAU(0): Virtual size is 1680x1050 (pitch 0)
[ 190.929] (**) NOUVEAU(0): Driver mode "1680x1050": 121.0 MHz (scaled from 0.0 MHz), 64.5 kHz, 60.6 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1680x1050"x60.6 121.00 1680 1704 1792 1876 1050 1051 1054 1065 -hsync -vsync (64.5 kHz eP)
[ 190.929] (**) NOUVEAU(0): Driver mode "1680x1050": 148.8 MHz (scaled from 0.0 MHz), 66.4 kHz, 60.9 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1680x1050"x60.9 148.75 1680 1784 1960 2240 1050 1053 1059 1090 -hsync +vsync (66.4 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "1400x1050": 123.8 MHz (scaled from 0.0 MHz), 66.4 kHz, 60.9 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1400x1050"x60.9 123.75 1400 1488 1632 1864 1050 1053 1057 1090 -hsync +vsync (66.4 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "1280x1024": 110.8 MHz (scaled from 0.0 MHz), 64.7 kHz, 60.9 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1280x1024"x60.9 110.75 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (64.7 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "1280x960": 103.0 MHz (scaled from 0.0 MHz), 60.7 kHz, 60.9 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1280x960"x60.9 103.00 1280 1360 1488 1696 960 963 967 997 -hsync +vsync (60.7 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "1152x864": 83.0 MHz (scaled from 0.0 MHz), 54.6 kHz, 60.8 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1152x864"x60.8 83.00 1152 1216 1336 1520 864 867 871 898 -hsync +vsync (54.6 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "1024x768": 65.2 MHz (scaled from 0.0 MHz), 48.5 kHz, 60.8 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "1024x768"x60.8 65.25 1024 1080 1184 1344 768 771 775 798 -hsync +vsync (48.5 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "800x600": 38.8 MHz (scaled from 0.0 MHz), 37.8 kHz, 60.6 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "800x600"x60.6 38.75 800 832 912 1024 600 603 607 624 -hsync +vsync (37.8 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "640x480": 24.2 MHz (scaled from 0.0 MHz), 30.3 kHz, 60.6 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "640x480"x60.6 24.25 640 664 720 800 480 483 487 500 -hsync +vsync (30.3 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "720x400": 22.8 MHz (scaled from 0.0 MHz), 25.4 kHz, 60.9 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "720x400"x60.9 22.75 720 744 808 896 400 403 413 417 -hsync +vsync (25.4 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "640x400": 20.2 MHz (scaled from 0.0 MHz), 25.3 kHz, 60.7 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "640x400"x60.7 20.25 640 664 720 800 400 403 409 417 -hsync +vsync (25.3 kHz e)
[ 190.929] (**) NOUVEAU(0): Driver mode "640x350": 17.8 MHz (scaled from 0.0 MHz), 22.2 kHz, 60.6 Hz
[ 190.929] (II) NOUVEAU(0): Modeline "640x350"x60.6 17.75 640 664 720 800 350 353 363 366 -hsync +vsync (22.2 kHz e)
[ 190.929] (**) NOUVEAU(0): Display dimensions: (330, 210) mm
[ 190.929] (**) NOUVEAU(0): DPI set to (129, 127)
[ 190.929] (II) Loading sub module "fb"
[ 190.929] (II) LoadModule: "fb"
[ 190.929] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 190.931] (II) Module fb: vendor="X.Org Foundation"
[ 190.931] compiled for 1.12.3, module version = 1.0.0
[ 190.931] ABI class: X.Org ANSI C Emulation, version 0.4
[ 190.931] (II) Loading sub module "exa"
[ 190.931] (II) LoadModule: "exa"
[ 190.931] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 190.937] (II) Module exa: vendor="X.Org Foundation"
[ 190.937] compiled for 1.12.3, module version = 2.5.0
[ 190.937] ABI class: X.Org Video Driver, version 12.0
[ 190.937] (II) Loading sub module "shadowfb"
[ 190.937] (II) LoadModule: "shadowfb"
[ 190.937] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 190.943] (II) Module shadowfb: vendor="X.Org Foundation"
[ 190.943] compiled for 1.12.3, module version = 1.0.0
[ 190.943] ABI class: X.Org ANSI C Emulation, version 0.4
[ 190.943] (--) Depth 24 pixmap format is 32 bpp
[ 190.944] (II) NOUVEAU(0): Opened GPU channel 2
[ 190.950] (II) NOUVEAU(0): [DRI2] Setup complete
[ 190.950] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 190.950] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 190.951] (II) EXA(0): Driver allocated offscreen pixmaps
[ 190.951] (II) EXA(0): Driver registered support for the following operations:
[ 190.951] (II) Solid
[ 190.951] (II) Copy
[ 190.951] (II) Composite (RENDER acceleration)
[ 190.951] (II) UploadToScreen
[ 190.951] (II) DownloadFromScreen
[ 190.951] (==) NOUVEAU(0): Backing store disabled
[ 190.951] (==) NOUVEAU(0): Silken mouse enabled
[ 190.951] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 190.951] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 190.951] (==) NOUVEAU(0): DPMS enabled
[ 190.951] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 190.952] (--) RandR disabled
[ 190.952] (II) Initializing built-in extension Generic Event Extension
[ 190.952] (II) Initializing built-in extension SHAPE
[ 190.952] (II) Initializing built-in extension MIT-SHM
[ 190.952] (II) Initializing built-in extension XInputExtension
[ 190.952] (II) Initializing built-in extension XTEST
[ 190.952] (II) Initializing built-in extension BIG-REQUESTS
[ 190.952] (II) Initializing built-in extension SYNC
[ 190.952] (II) Initializing built-in extension XKEYBOARD
[ 190.952] (II) Initializing built-in extension XC-MISC
[ 190.952] (II) Initializing built-in extension SECURITY
[ 190.952] (II) Initializing built-in extension XINERAMA
[ 190.952] (II) Initializing built-in extension XFIXES
[ 190.952] (II) Initializing built-in extension RENDER
[ 190.952] (II) Initializing built-in extension RANDR
[ 190.952] (II) Initializing built-in extension COMPOSITE
[ 190.952] (II) Initializing built-in extension DAMAGE
[ 190.957] (EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/nouveau_dri.so failed (/usr/lib/xorg/modules/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
[ 190.957] (EE) AIGLX: reverting to software rendering
[ 190.957] (II) AIGLX: Screen 0 is not DRI capable
[ 191.236] (II) AIGLX: Loaded and initialized swrast
[ 191.236] (II) GLX: Initialized DRISWRAST GL provider for screen 0
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment