Cerberus BoM

gistfile1.txt

30.60 KJN 40x40 extrusions 3 x 1m
      ITM02633
      http://www.aluminium-profile.co.uk/acatalog/8mm_Slot_ITM_Profile.html

31.00 200m filament from faberdashery

78.33 Grabercars bearings
      9 x Dual 623 Wide V Roller - fits both 3mm and 8mm T-Slot extrusions
          http://3d.grabercars.com/?product=dual-623-wide-v-roller-fits-both-3mm-and-8mm-t-slot-extrusions
      3 x Delrin V-Groove Idler Pulley – 8mm I.D.
          http://3d.grabercars.com/?product=v-groove-8mm
      6 x Delrin V-Groove Idler Pulley – 4mm I.D.
          http://3d.grabercars.com/?product=26
      3 x Filament Drive Reel – Grooved – 15mm O.D. – for CERBERUS
          http://3d.grabercars.com/?product=filament-drive-reel-grooved-15mm-o-d-for-cerberus

 free  tridprinting rod ends set
      12 x Traxxas Rod Ends (Large) with Hollow Balls #5347
 8.50 carbon fibre rods

 8.99 spectra braid
 1.90 +delivery

43.96 4 x NEMA17 motors

      Bolts
      12 x M3x25mm for motor mounting
      12 x M3 washer for motor mounting
      4 x M3x40mm for fit idler part
      4 x M3 nut for fit idler part
      4 x M4x35mm for idler axle
      4 x M4 nut for fit idler axle
      12 x M5x20mm for fit flat bar to upper and lower braces
      12 x M5 washer for fit flat bar to upper and lower braces
      3 x M5x25mm for though extrusion into bottom tripod arm end
      3 x M5 washer for though extrusion into bottom tripod arm end

For bolts also see the older info at:

  https://groups.google.com/d/msg/deltabot/F5Nrg6RVbkk/a1YBe3lYJIQJ