Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
EdgeRouter Lite QOS Settings
#
# fair-queue based settings for EdgeRouter Lite traffic shaping
#
# download is typically 30 and change. everything can burst to 100%
# of bandwidth, priority rules keep the garbage in check
set traffic-policy shaper download
set traffic-policy shaper download bandwidth 30Mbit
# set default download priority
set traffic-policy shaper download default bandwidth 70%
set traffic-policy shaper download default ceiling 100%
set traffic-policy shaper download default priority 3
set traffic-policy shaper download default queue-type fair-queue
# megasuper priority dns and ssh and icmp
set traffic-policy shaper download class 10 bandwidth 10%
set traffic-policy shaper download class 10 ceiling 100%
set traffic-policy shaper download class 10 priority 5
set traffic-policy shaper download class 10 queue-type fair-queue
set traffic-policy shaper download class 10 match icmp ip protocol icmp
set traffic-policy shaper download class 10 match ssh ip source port 22
set traffic-policy shaper download class 10 match dns ip source port 53
# semipriority http and https
set traffic-policy shaper download class 20 bandwidth 10%
set traffic-policy shaper download class 20 ceiling 100%
set traffic-policy shaper download class 20 priority 4
set traffic-policy shaper download class 20 queue-type fair-queue
set traffic-policy shaper download class 20 match http ip source port 80
set traffic-policy shaper download class 20 match https ip source port 443
# garbage bittorrent
set traffic-policy shaper download class 30 bandwidth 10%
set traffic-policy shaper download class 30 ceiling 100%
set traffic-policy shaper download class 30 priority 1
set traffic-policy shaper download class 30 queue-type fair-queue
# FIXME: no port ranges in QOS rules.
# instead, mark packets in a firewall rule and match on that
#set traffic-policy shaper download class 30 match bittorrent ip source port 6881-6889
set traffic-policy shaper download class 30 match transmission ip source port 51413
set interfaces ethernet eth1 traffic-policy out download
# upload is typically 5.5-ish. should be clamped at less than 100%
# of advertised bandwidth to avoid buffer bloat and lag
set traffic-policy shaper upload
set traffic-policy shaper upload bandwidth 5Mbit
# high priority, interactive, ssh, dns, icmp
set traffic-policy shaper upload class 2 bandwidth 10%
set traffic-policy shaper upload class 2 ceiling 100%
set traffic-policy shaper upload class 2 priority 5
set traffic-policy shaper upload class 2 queue-type fair-queue
set traffic-policy shaper upload class 2 queue-limit 16
set traffic-policy shaper upload class 2 match icmp ip protocol icmp
set traffic-policy shaper upload class 2 match ssh ip destination port 22
set traffic-policy shaper upload class 2 match dns ip destination port 53
# high priority but not quite so much, http, https
set traffic-policy shaper upload class 5 bandwidth 10%
set traffic-policy shaper upload class 5 ceiling 100%
set traffic-policy shaper upload class 5 priority 4
set traffic-policy shaper upload class 5 queue-type fair-queue
set traffic-policy shaper upload class 5 match http ip destination port 80
set traffic-policy shaper upload class 5 match https ip destination port 443
# everything else is middle-of-the-road priority
set traffic-policy shaper upload default bandwidth 60%
set traffic-policy shaper upload default ceiling 100%
set traffic-policy shaper upload default priority 3
set traffic-policy shaper upload default queue-type fair-queue
# crashplan traffic only, set DSCP to 32 in crashplan, matches 8 here (?)
set traffic-policy shaper upload class 10 bandwidth 10%
set traffic-policy shaper upload class 10 ceiling 100%
set traffic-policy shaper upload class 10 priority 2
set traffic-policy shaper upload class 10 queue-type fair-queue
set traffic-policy shaper upload class 10 match crashplan ip dscp 8
# bulk, bittorrent from transmission client on default port
set traffic-policy shaper upload class 20 bandwidth 10%
set traffic-policy shaper upload class 20 ceiling 100%
set traffic-policy shaper upload class 20 priority 1
set traffic-policy shaper upload class 20 queue-type fair-queue
set traffic-policy shaper upload class 20 match bittorrent ip source port 51413
set interfaces ethernet eth0 traffic-policy out upload
@slesru

This comment has been minimized.

Copy link

commented Jun 27, 2017

Hmm, no example for firewall marking? :-(

@hlmtre

This comment has been minimized.

Copy link

commented Feb 8, 2019

So these QoS settings gave me an excellent example to copy and make sense of for my VyOS box (the config translates over 1-to-1; copy and paste). Suddenly QoS makes sense. Thank you.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.