Home Assistant config for ANKO HEGSM40 fan running Tasmota

configuration.yaml

# bedroom fan
mqtt:
  fan:
    - name: "Bedroom Fan"
      unique_id: "bedroom_fan"
      device: { "identifiers": "tasmota bedroom fan", "suggested_area": "Bedroom" }
      command_topic: "cmnd/tasmota_743BE6/POWER"
      state_topic: "stat/tasmota_743BE6/POWER"
      percentage_command_topic: "cmnd/tasmota_743BE6/TuyaSend4"
      percentage_command_template: "{{ {1: '3,0', 2: '3,1', 3: '3,2', 4: '3,3', 5: '3,4', 6: '3,5', 7: '3,6', 8: '3,7'}[value] | default('1') }}"
      percentage_state_topic: "stat/tasmota_743BE6/DPTYPE4ID3"
      speed_range_min: 1
      speed_range_max: 8
      oscillation_command_topic: "cmnd/tasmota_743BE6/TuyaSend4"
      oscillation_state_topic: "stat/tasmota_743BE6/DPTYPE4ID4"
      payload_oscillation_on: "4,1"
      payload_oscillation_off: "4,0"
      #preset_mode_command_topic: "cmnd/tasmota_743BE6/TuyaSend4"
      #preset_modes:
      #  -  "normal"
      #  -  "nature"
      #  -  "sleep mode"
      #preset_mode_command_template: "{{ { 'normal': '2,0', 'nature' : '2,1', 'sleep': '2,2'}[value] | default('normal') }}"
      #preset_mode_state_topic: "stat/tasmota_743BE6/DPTYPE4ID2"