.rtorrent.rc

# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.

# Maximum and minimum number of peers to connect to per torrent.
min_peers = 1
max_peers = 100

# Same as above but for seeding completed torrents (-1 = same as downloading)
min_peers_seed = 0
max_peers_seed = 0

# Maximum number of uploads single torrent may use
max_uploads = 100

# Maximum number of simultaneous downloads
max_downloads_global = 3
# Maximum number of simultaneous uploads
max_uploads_global = 200

# Global upload and download rate in KiB. "0" for unlimited.
download_rate = 0
upload_rate = 1

# Default directory to save the downloaded torrents.
directory = /home/pi/torrents/downloaded

# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
session = /home/pi/rtorrent/session/

# Watch a directory for new torrents, and stop those that have been
# deleted.
schedule = tied_directory,10,10,start_tied=
schedule = untied_directory,10,10,close_untied=
schedule = watch_directory_1,10,10,"load_start=/home/pi/rtorrent/torrents/movies/*.torrent,d.set_directory=/media/Wall-E/Movies/"
schedule = watch_directory_2,10,10,"load_start=/home/pi/rtorrent/torrents/series/*.torrent,d.set_directory=/media/Wall-E/Series/"

# Close torrents when diskspace is low.
schedule = low_diskspace,5,60,close_low_diskspace=2000M

# Periodically save session data
schedule = session_save,240,300,session_save=

# Enable the default ratio group.
ratio.enable=

# Change the limits, the defaults should be sufficient.
# Upload to a minimum ratio of 4.0
ratio.min.set=400
# Upload to a maximum ratio of 20.0
ratio.max.set=2000
# Upload a minimum of 250 MB
ratio.upload.set=250M

# When seeding ratio is reached close the torrent
system.method.set = group.seeding.ratio.command, d.close=

# Move files to ./unsorted when download completes
system.method.set_key = event.download.finished,move_complete,"execute=mv,-n,$d.get_base_path=,./unsorted/;d.set_directory=./unsorted/"

# Port range to use for listening.
port_range = 33101-33199

# Start opening ports at a random position within the port range.
port_random = yes

# Encryption options, set to none (default) or any combination of the following:
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
#
# The example value allows incoming encrypted connections, starts unencrypted
# outgoing connections but retries with encryption if they fail, preferring
# plaintext to RC4 encryption after the encrypted handshake
#
encryption = allow_incoming,try_outgoing,enable_retry,prefer_plaintext

# Sort the seeding view by the upload rate
view_sort_current = seeding,greater=d.get_up_rate=
view_sort_new = seeding,greater=d.get_up_rate=
schedule = sort,5,2,view_sort=seeding

# Enable DHT support for trackerless torrents or when all trackers are down.
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
# The default is "off". For DHT to work, a session directory must be defined.
# 
#dht = auto

# UDP port to use for DHT. 
# 
#dht_port = 6881

# Enable peer exchange (for torrents not marked private)
#
#peer_exchange = yes