I am attempting to make a stereo camera rig for the pandaboard. The aim is to release it as an open source hardware project when it is in a working form.
Some images of the hardware can be found here: http://imgur.com/a/3L5l8
System layout:
Input Journeys | |
---- | |
processing route: 100 whiteladies road | |
-> 15 Park Street | |
route interpreted as: 100 Whiteladies Rd, Clifton, Bristol, City of Bristol BS8, UK | |
-> 15 Park St, Bristol BS1, UK | |
route length 1859.06420152 | |
processing route: 6 Tyndalls Park Road | |
-> Temple Meads Station |
include <MCAD/involute_gears.scad> | |
include <MCAD/bearing.scad> | |
include <MCAD/boxes.scad> | |
include <MCAD/nuts_and_bolts.scad> | |
include <MCAD/units.scad> | |
include <motor_gearbox.scad> | |
far_center = [60,0,0]; | |
near_center = [-60,0,0]; |
include <MCAD/involute_gears.scad> | |
include <MCAD/bearing.scad> | |
include <MCAD/boxes.scad> | |
include <MCAD/nuts_and_bolts.scad> | |
include <MCAD/units.scad> | |
far_center = [60,0,0]; | |
near_center = [-60,0,0]; | |
end_cube_radius = 15; | |
stem_thickness = 7; |
//c Ben Howes 2012 | |
//the main structure of the arm section | |
module s1_main(outline=false, tol=0){ | |
far_center = 120; | |
end_cube_radius = 15; | |
hole_offset = end_cube_radius-4.75; |
initBuffer = (len)-> | |
buffer = new ArrayBuffer(len) | |
stack = new Uint8Array(buffer); | |
for i in [0..len] by 2 | |
stack[i] = 0; | |
stack[i+1] = 1; | |
stack | |
regress = ()-> | |
stack = initBuffer(4) |
regress = ()-> | |
stack = [0,1,0,1] #regress with stack of 4 and mean of 0 | |
(result)-> | |
stack.push(result) | |
stack.unshift() | |
sum = 0 | |
for i in stack | |
sum += i | |
sum /= 4 | |
if sum is 0.5 then Math.RandomInteger(0,1) |
runs = 1000000 | |
Math.RandomInteger = (n, m) -> | |
if not m then m = 1 # default range starts at 1 | |
max = if n > m then n else m # doesn<q>t matter which value is min or max | |
min = if n is max then m else n # min is value that is not max | |
d = max - min + 1 # distribution range | |
Math.floor(Math.random() * d + min) |
I am attempting to make a stereo camera rig for the pandaboard. The aim is to release it as an open source hardware project when it is in a working form.
Some images of the hardware can be found here: http://imgur.com/a/3L5l8
System layout: