Simple, hacky SSL Benchmark ported from oracle example

SSLBenchmark

package kafka.tools;
/*
 * Copyright (c) 2004, Oracle and/or its affiliates. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * -Redistribution of source code must retain the above copyright
 *  notice, this list of conditions and the following disclaimer.
 *
 * -Redistribution in binary form must reproduce the above copyright
 *  notice, this list of conditions and the following disclaimer in the
 *  documentation and/or other materials provided with the
 *  distribution.
 *
 * Neither the name of Oracle nor the names of
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * This software is provided "AS IS," without a warranty of any kind.
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
 * INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A
 * PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE HEREBY EXCLUDED. SUN
 * MIDROSYSTEMS, INC. ("SUN") AND ITS LICENSORS SHALL NOT BE LIABLE FOR
 * ANY DAMAGES SUFFERED BY LICENSEE AS A RESULT OF USING, MODIFYING OR
 * DISTRIBUTING THIS SOFTWARE OR ITS DERIVATIVES. IN NO EVENT WILL SUN
 * OR ITS LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR
 * FOR DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE
 * DAMAGES, HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY,
 * ARISING OUT OF THE USE OF OR INABILITY TO USE THIS SOFTWARE, EVEN IF
 * SUN HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 *
 * You acknowledge that this software is not designed, licensed or
 * intended for use in the design, construction, operation or
 * maintenance of any nuclear facility.
 */

/**
 * A SSLEngine usage example which simplifies the presentation
 * by removing the I/O and multi-threading concerns.
 *
 * The demo creates two SSLEngines, simulating a client and server.
 * The "transport" layer consists two ByteBuffers:  think of them
 * as directly connected pipes.
 *
 * Note, this is a *very* simple example: real code will be much more
 * involved.  For example, different threading and I/O models could be
 * used, transport mechanisms could close unexpectedly, and so on.
 *
 * When this application runs, notice that several messages
 * (wrap/unwrap) pass before any application data is consumed or
 * produced.  (For more information, please see the SSL/TLS
 * specifications.)  There may several steps for a successful handshake,
 * so it's typical to see the following series of operations:
 *
 *      client          server          message
 *      ======          ======          =======
 *      wrap()          ...             ClientHello
 *      ...             unwrap()        ClientHello
 *      ...             wrap()          ServerHello/Certificate
 *      unwrap()        ...             ServerHello/Certificate
 *      wrap()          ...             ClientKeyExchange
 *      wrap()          ...             ChangeCipherSpec
 *      wrap()          ...             Finished
 *      ...             unwrap()        ClientKeyExchange
 *      ...             unwrap()        ChangeCipherSpec
 *      ...             unwrap()        Finished
 *      ...             wrap()          ChangeCipherSpec
 *      ...             wrap()          Finished
 *      unwrap()        ...             ChangeCipherSpec
 *      unwrap()        ...             Finished
 */

import javax.net.ssl.*;
import javax.net.ssl.SSLEngineResult.*;
import java.io.*;
import java.security.*;
import java.nio.*;

public class SSLEngineSimpleDemo {


    private static int dataTransferSize;
    private static int netBufferSize;

    /*
     * Enables logging of the SSLEngine operations.
     */
    private static boolean logging = false;

    /*
     * Enables the JSSE system debugging system property:
     *
     *     -Djavax.net.debug=all
     *
     * This gives a lot of low-level information about operations underway,
     * including specific handshake messages, and might be best examined
     * after gaining some familiarity with this application.
     */
    private static boolean debug = false;

    private SSLContext sslc;

    private SSLEngine clientEngine;     // client Engine
    private ByteBuffer clientOut;       // write side of clientEngine
    private ByteBuffer clientIn;        // read side of clientEngine

    private SSLEngine serverEngine;     // server Engine
    private ByteBuffer serverOut;       // write side of serverEngine
    private ByteBuffer serverIn;        // read side of serverEngine

    /*
     * For data transport, this example uses local ByteBuffers.  This
     * isn't really useful, but the purpose of this example is to show
     * SSLEngine concepts, not how to do network transport.
     */
    private ByteBuffer cTOs;            // "reliable" transport client->server
    private ByteBuffer sTOc;            // "reliable" transport server->client

    /*
     * The following is to set up the keystores.
     */
    private static String keyStoreFile = "ssl-conf/keystore.jks";
    private static String trustStoreFile = "ssl-conf/truststore.jks";
    private static String passwd = "techno";

    /*
     * Main entry point for this demo.
     */
    public static void main(String args[]) throws Exception {
        if (debug) {
            System.setProperty("javax.net.debug", "all");
        }

        dataTransferSize = 10 * 1024 * 1024;
        netBufferSize = 17 * 1024; //needs to be bigger than 16k

        SSLEngineSimpleDemo demo = new SSLEngineSimpleDemo();
        for (int i = 0; i < 20; i++)
            demo.runDemo();

        System.out.println("Demo Completed.");
    }

    /*
     * Create an initialized SSLContext to use for this demo.
     */
    public SSLEngineSimpleDemo() throws Exception {

        KeyStore ks = KeyStore.getInstance("JKS");
        KeyStore ts = KeyStore.getInstance("JKS");

        char[] passphrase = "techno".toCharArray();

        ks.load(new FileInputStream(keyStoreFile), passphrase);
        ts.load(new FileInputStream(trustStoreFile), passphrase);

        KeyManagerFactory kmf = KeyManagerFactory.getInstance("SunX509");
        kmf.init(ks, passphrase);

        TrustManagerFactory tmf = TrustManagerFactory.getInstance("SunX509");
        tmf.init(ts);

        SSLContext sslCtx = SSLContext.getInstance("TLS");

        sslCtx.init(kmf.getKeyManagers(), tmf.getTrustManagers(), null);

        sslc = sslCtx;
    }

    /*
     * Run the demo.
     *
     * Sit in a tight loop, both engines calling wrap/unwrap regardless
     * of whether data is available or not.  We do this until both engines
     * report back they are closed.
     *
     * The main loop handles all of the I/O phases of the SSLEngine's
     * lifetime:
     *
     *     initial handshaking
     *     application data transfer
     *     engine closing
     *
     * One could easily separate these phases into separate
     * sections of code.
     */
    private void runDemo() throws Exception {
        long start = System.currentTimeMillis();
        boolean dataDone = false;

        createSSLEngines();
        createBuffers();

        SSLEngineResult clientResult;   // results from client's last operation
        SSLEngineResult serverResult;   // results from server's last operation

        /*
         * Examining the SSLEngineResults could be much more involved,
         * and may alter the overall flow of the application.
         *
         * For example, if we received a BUFFER_OVERFLOW when trying
         * to write to the output pipe, we could reallocate a larger
         * pipe, but instead we wait for the peer to drain it.
         */
        while (!isEngineClosed(clientEngine) ||
                !isEngineClosed(serverEngine)) {

            log("================");

            clientResult = clientEngine.wrap(clientOut, cTOs);
            log("client wrap: ", clientResult);
            runDelegatedTasks(clientResult, clientEngine);

            serverResult = serverEngine.wrap(serverOut, sTOc);
            log("server wrap: ", serverResult);
            runDelegatedTasks(serverResult, serverEngine);

            cTOs.flip();
            sTOc.flip();

            log("----");

            clientResult = clientEngine.unwrap(sTOc, clientIn);
            log("client unwrap: ", clientResult);
            runDelegatedTasks(clientResult, clientEngine);

            serverResult = serverEngine.unwrap(cTOs, serverIn);
            log("server unwrap: ", serverResult);
            runDelegatedTasks(serverResult, serverEngine);

            cTOs.compact();
            sTOc.compact();

            /*
             * After we've transfered all application data between the client
             * and server, we close the clientEngine's outbound stream.
             * This generates a close_notify handshake message, which the
             * server engine receives and responds by closing itself.
             *
             * In normal operation, each SSLEngine should call
             * closeOutbound().  To protect against truncation attacks,
             * SSLEngine.closeInbound() should be called whenever it has
             * determined that no more input data will ever be
             * available (say a closed input stream).
             */

            log("Client Out limit " + clientOut.limit() + " Server In Limit " + serverIn.position());
            log("Server Out limit " + serverOut.limit() + " Server In Limit " + clientIn.position());
            if (!dataDone && (clientOut.limit() == serverIn.position()) &&
                    (serverOut.limit() == clientIn.position())) {

                /*
                 * A sanity check to ensure we got what was sent.
                 */
                checkTransfer(serverOut, clientIn);
                checkTransfer(clientOut, serverIn);

                log("\tClosing clientEngine's *OUTBOUND*...");
                clientEngine.closeOutbound();
                // serverEngine.closeOutbound();
                dataDone = true;
            }
        }

        long took = System.currentTimeMillis() - start;
        System.out.println("Took " + took);

        System.out.println(dataTransferSize * 1024d / 1024 / 1000 / took + " MB/s");

    }

    /*
     * Using the SSLContext created during object creation,
     * create/configure the SSLEngines we'll use for this demo.
     */
    private void createSSLEngines() throws Exception {
        /*
         * Configure the serverEngine to act as a server in the SSL/TLS
         * handshake.  Also, require SSL client authentication.
         */
        serverEngine = sslc.createSSLEngine();
        serverEngine.setUseClientMode(false);
        serverEngine.setNeedClientAuth(true);

        /*
         * Similar to above, but using client mode instead.
         */
        clientEngine = sslc.createSSLEngine("client", 80);
        clientEngine.setUseClientMode(true);
    }

    /*
     * Create and size the buffers appropriately.
     */
    private void createBuffers() {
        SSLSession session = clientEngine.getSession();
        clientIn = ByteBuffer.allocate(dataTransferSize + 50);
        serverIn = ByteBuffer.allocate(dataTransferSize + 50);

        cTOs = ByteBuffer.allocateDirect(netBufferSize);
        sTOc = ByteBuffer.allocateDirect(netBufferSize);

        clientOut = ByteBuffer.wrap("I'd like some data please".getBytes());
        serverOut = ByteBuffer.wrap(new byte[dataTransferSize]);
    }

    /*
     * If the result indicates that we have outstanding tasks to do,
     * go ahead and run them in this thread.
     */
    private static void runDelegatedTasks(SSLEngineResult result,
                                          SSLEngine engine) throws Exception {

        if (result.getHandshakeStatus() == HandshakeStatus.NEED_TASK) {
            Runnable runnable;
            while ((runnable = engine.getDelegatedTask()) != null) {
                log("\trunning delegated task...");
                runnable.run();
            }
            HandshakeStatus hsStatus = engine.getHandshakeStatus();
            if (hsStatus == HandshakeStatus.NEED_TASK) {
                throw new Exception(
                        "handshake shouldn't need additional tasks");
            }

            log("\tnew HandshakeStatus: " + hsStatus);
        }
        if (result.getHandshakeStatus() == HandshakeStatus.NOT_HANDSHAKING) {
            if (result.getStatus() == Status.BUFFER_OVERFLOW) {

            }
        }
    }

    private static boolean isEngineClosed(SSLEngine engine) {
        return (engine.isOutboundDone() && engine.isInboundDone());
    }

    /*
     * Simple check to make sure everything came across as expected.
     */
    private static void checkTransfer(ByteBuffer a, ByteBuffer b)
            throws Exception {
        a.flip();
        b.flip();

        if (!a.equals(b)) {
            throw new Exception("Data didn't transfer cleanly");
        } else {
            log("\tData transferred cleanly");
        }

        a.position(a.limit());
        b.position(b.limit());
        a.limit(a.capacity());
        b.limit(b.capacity());
    }

    /*
     * Logging code
     */
    private static boolean resultOnce = true;

    private static void log(String str, SSLEngineResult result) {
        if (!logging) {
            return;
        }
        if (resultOnce) {
            resultOnce = false;
            System.out.println("The format of the SSLEngineResult is: \n" +
                    "\t\"getStatus() / getHandshakeStatus()\" +\n" +
                    "\t\"bytesConsumed() / bytesProduced()\"\n");
        }
        HandshakeStatus hsStatus = result.getHandshakeStatus();
        log(str +
                result.getStatus() + "/" + hsStatus + ", " +
                result.bytesConsumed() + "/" + result.bytesProduced() +
                " bytes");
        if (hsStatus == HandshakeStatus.FINISHED) {
            log("\t...ready for application data");
        }
    }

    private static void log(String str) {
        if (logging) {
            System.out.println(str);
        }
    }
}