xen_dmesg

[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WC  WP  UC  UC  
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.2.0-18-generic (buildd@lgw01-38) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #22-Ubuntu SMP Fri Nov 6 18:25:50 UTC 2015 (Ubuntu 4.2.0-18.22-generic 4.2.3)
[    0.000000] Command line: placeholder root=UUID=f3feacbe-ef73-430f-937d-e1232da77e68 ro rootflags=subvol=@ quiet splash acpi=off
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] Released 0 page(s)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] Xen: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] Xen: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] Xen: [mem 0x0000000000059000-0x000000000009bfff] usable
[    0.000000] Xen: [mem 0x000000000009c000-0x000000000009cfff] reserved
[    0.000000] Xen: [mem 0x000000000009d000-0x000000000009dfff] usable
[    0.000000] Xen: [mem 0x000000000009e000-0x00000000000fffff] reserved
[    0.000000] Xen: [mem 0x0000000000100000-0x00000000cfd5ffff] usable
[    0.000000] Xen: [mem 0x00000000cfd60000-0x00000000cff61fff] reserved
[    0.000000] Xen: [mem 0x00000000cff62000-0x00000000da44cfff] usable
[    0.000000] Xen: [mem 0x00000000da44d000-0x00000000da64cfff] type 20
[    0.000000] Xen: [mem 0x00000000da64d000-0x00000000dcd3efff] reserved
[    0.000000] Xen: [mem 0x00000000dcd3f000-0x00000000dce7efff] ACPI NVS
[    0.000000] Xen: [mem 0x00000000dce7f000-0x00000000dcefefff] ACPI data
[    0.000000] Xen: [mem 0x00000000dceff000-0x00000000dcefffff] usable
[    0.000000] Xen: [mem 0x00000000dcf00000-0x00000000df9fffff] reserved
[    0.000000] Xen: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
[    0.000000] Xen: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[    0.000000] Xen: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] Xen: [mem 0x0000000100000000-0x000000031f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI not present or invalid.
[    0.000000] Hypervisor detected: Xen
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x31f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR: Disabled
[    0.000000] e820: last_pfn = 0xdcf00 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x2e8a00000-0x2e8bfffff]
[    0.000000]  [mem 0x2e8a00000-0x2e8bfffff] page 4k
[    0.000000] BRK [0x01fef000, 0x01feffff] PGTABLE
[    0.000000] BRK [0x01ff0000, 0x01ff0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x2e0000000-0x2e89fffff]
[    0.000000]  [mem 0x2e0000000-0x2e89fffff] page 4k
[    0.000000] BRK [0x01ff1000, 0x01ff1fff] PGTABLE
[    0.000000] BRK [0x01ff2000, 0x01ff2fff] PGTABLE
[    0.000000] BRK [0x01ff3000, 0x01ff3fff] PGTABLE
[    0.000000] BRK [0x01ff4000, 0x01ff4fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x2c0000000-0x2dfffffff]
[    0.000000]  [mem 0x2c0000000-0x2dfffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfd5ffff]
[    0.000000]  [mem 0x00100000-0xcfd5ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xcff62000-0xda44cfff]
[    0.000000]  [mem 0xcff62000-0xda44cfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdceff000-0xdcefffff]
[    0.000000]  [mem 0xdceff000-0xdcefffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x2bfffffff]
[    0.000000]  [mem 0x100000000-0x2bfffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x2e8c00000-0x31f5fffff]
[    0.000000]  [mem 0x2e8c00000-0x31f5fffff] page 4k
[    0.000000] RAMDISK: [mem 0x04000000-0x06162fff]
[    0.000000] NUMA turned off
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000031f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x2e8ce6000-0x2e8ceafff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x000000000009d000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cfd5ffff]
[    0.000000]   node   0: [mem 0x00000000cff62000-0x00000000da44cfff]
[    0.000000]   node   0: [mem 0x00000000dceff000-0x00000000dcefffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000031f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000031f5fffff]
[    0.000000] On node 0 totalpages: 3119079
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13898 pages used for memmap
[    0.000000]   DMA32 zone: 889420 pages, LIFO batch:31
[    0.000000]   Normal zone: 34776 pages used for memmap
[    0.000000]   Normal zone: 2225664 pages, LIFO batch:31
[    0.000000] p2m virtual area at ffffc90000000000, size is 40000000
[    0.000000] Remapped 155160 page(s)
[    0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[    0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfd60000-0xcff61fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda44d000-0xda64cfff]
[    0.000000] PM: Registered nosave memory: [mem 0xda64d000-0xdcd3efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcd3f000-0xdce7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xdce7f000-0xdcefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdcf00000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf80f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf80f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.5.1 (preserve-AD)
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88030e800000 s96728 r8192 d30248 u2097152
[    0.000000] pcpu-alloc: s96728 r8192 d30248 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] xen: PV spinlocks enabled
[    0.000000] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes)
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 3070320
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: placeholder root=UUID=f3feacbe-ef73-430f-937d-e1232da77e68 ro rootflags=subvol=@ quiet splash acpi=off
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] software IO TLB [mem 0x30a800000-0x30e800000] (64MB) mapped at [ffff88030a800000-ffff88030e7fffff]
[    0.000000] Memory: 11839912K/12476316K available (8146K kernel code, 1237K rwdata, 3800K rodata, 1460K init, 1292K bss, 636404K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=1
[    0.000000] NR_IRQS:16640 nr_irqs:32 16
[    0.000000] xen:events: Using FIFO-based ABI
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: xen: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Xen: using vcpuop timer interface
[    0.000000] installing Xen timer for CPU 0
[    0.000000] tsc: Detected 2294.766 MHz processor
[    4.786347] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.53 BogoMIPS (lpj=9179064)
[    4.786355] pid_max: default: 32768 minimum: 301
[    4.787007] Security Framework initialized
[    4.787033] AppArmor: AppArmor initialized
[    4.787036] Yama: becoming mindful.
[    4.793414] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    4.803757] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    4.807480] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    4.807585] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    4.808338] Initializing cgroup subsys blkio
[    4.808346] Initializing cgroup subsys memory
[    4.808370] Initializing cgroup subsys devices
[    4.808378] Initializing cgroup subsys freezer
[    4.808384] Initializing cgroup subsys net_cls
[    4.808391] Initializing cgroup subsys perf_event
[    4.808398] Initializing cgroup subsys net_prio
[    4.808405] Initializing cgroup subsys hugetlb
[    4.808571] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    4.808573] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    4.808581] CPU: Physical Processor ID: 0
[    4.808584] CPU: Processor Core ID: 0
[    4.810654] mce: CPU supports 2 MCE banks
[    4.810705] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    4.810708] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    4.884240] Freeing SMP alternatives memory: 28K (ffffffff81ea4000 - ffffffff81eab000)
[    4.888573] ftrace: allocating 30905 entries in 121 pages
[    4.922592] cpu 0 spinlock event irq 17
[    4.922699] Performance Events: unsupported p6 CPU model 69 no PMU driver, software events only.
[    4.924555] x86: Booted up 1 node, 1 CPUs
[    4.924635] NMI watchdog: disabled (cpu0): hardware events not enabled
[    4.924638] NMI watchdog: Shutting down hard lockup detector on all cpus
[    4.924774] devtmpfs: initialized
[    4.931820] evm: security.selinux
[    4.931824] evm: security.SMACK64
[    4.931826] evm: security.SMACK64EXEC
[    4.931828] evm: security.SMACK64TRANSMUTE
[    4.931830] evm: security.SMACK64MMAP
[    4.931833] evm: security.ima
[    4.931835] evm: security.capability
[    4.931972] PM: Registering ACPI NVS region [mem 0xdcd3f000-0xdce7efff] (1310720 bytes)
[    4.932157] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    4.932335] pinctrl core: initialized pinctrl subsystem
[    4.932597] RTC time: 14:22:44, date: 11/24/15
[    4.932857] NET: Registered protocol family 16
[    4.932881] xen:grant_table: Grant tables using version 1 layout
[    4.932898] Grant table initialized
[    4.933906] PCI: Using configuration type 1 for base access
[    4.937447] ACPI: Interpreter disabled.
[    4.937476] xen:balloon: Initialising balloon driver
[    4.939677] xen_balloon: Initialising balloon driver
[    4.939888] vgaarb: loaded
[    4.940542] SCSI subsystem initialized
[    4.940617] libata version 3.00 loaded.
[    4.940708] usbcore: registered new interface driver usbfs
[    4.940728] usbcore: registered new interface driver hub
[    4.940743] usbcore: registered new device driver usb
[    4.940942] dmi: Firmware registration failed.
[    4.941073] PCI: Probing PCI hardware
[    4.941077] PCI: root bus 00: using default resources
[    4.941080] PCI: Probing PCI hardware (bus 00)
[    4.941143] PCI host bridge to bus 0000:00
[    4.941151] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    4.941156] pci_bus 0000:00: root bus resource [mem 0x00000000-0x7fffffffff]
[    4.941160] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    4.941201] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[    4.941531] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[    4.941642] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[    4.941687] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    4.941718] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    4.941933] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=mem,locks=none
[    4.941984] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[    4.942077] pci 0000:00:03.0: reg 0x10: [mem 0xf0630000-0xf0633fff 64bit]
[    4.942466] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[    4.942606] pci 0000:00:14.0: reg 0x10: [mem 0xf0620000-0xf062ffff 64bit]
[    4.942813] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    4.942970] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[    4.943087] pci 0000:00:16.0: reg 0x10: [mem 0xf0639000-0xf063901f 64bit]
[    4.943301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    4.943491] pci 0000:00:19.0: [8086:1559] type 00 class 0x020000
[    4.943597] pci 0000:00:19.0: reg 0x10: [mem 0xf0600000-0xf061ffff]
[    4.943630] pci 0000:00:19.0: reg 0x14: [mem 0xf063e000-0xf063efff]
[    4.943662] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    4.943847] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    4.944016] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[    4.944118] pci 0000:00:1b.0: reg 0x10: [mem 0xf0634000-0xf0637fff 64bit]
[    4.944330] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    4.944501] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400
[    4.944745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    4.944832] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    4.944840] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    4.944969] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400
[    4.945218] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    4.945278] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    4.945286] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    4.945443] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[    4.945550] pci 0000:00:1d.0: reg 0x10: [mem 0xf063d000-0xf063d3ff]
[    4.945805] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    4.945968] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[    4.946427] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[    4.946527] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    4.946574] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    4.946606] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    4.946638] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    4.946670] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    4.946702] pci 0000:00:1f.2: reg 0x24: [mem 0xf063c000-0xf063c7ff]
[    4.946805] pci 0000:00:1f.2: PME# supported from D3hot
[    4.946962] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[    4.947032] pci 0000:00:1f.3: reg 0x10: [mem 0xf0638000-0xf06380ff 64bit]
[    4.947121] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    4.947517] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    4.947699] pci 0000:02:00.0: reg 0x10: [mem 0xf0500000-0xf0500fff]
[    4.948220] pci 0000:02:00.0: supports D1 D2
[    4.948224] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    4.954656] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    4.954678] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    4.955483] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000
[    4.956902] pci 0000:03:00.0: reg 0x10: [mem 0xf0400000-0xf0401fff 64bit]
[    4.960004] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    4.967012] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    4.967033] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    4.967103] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03
[    4.971174] PCI: pci_cache_line_size set to 64 bytes
[    4.971599] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    4.971604] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[    4.971607] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    4.971610] e820: reserve RAM buffer [mem 0xcfd60000-0xcfffffff]
[    4.971613] e820: reserve RAM buffer [mem 0xda44d000-0xdbffffff]
[    4.971616] e820: reserve RAM buffer [mem 0xdcf00000-0xdfffffff]
[    4.971619] e820: reserve RAM buffer [mem 0x31f600000-0x31fffffff]
[    4.971880] NetLabel: Initializing
[    4.971883] NetLabel:  domain hash size = 128
[    4.971885] NetLabel:  protocols = UNLABELED CIPSOv4
[    4.971912] NetLabel:  unlabeled traffic allowed by default
[    4.972128] clocksource: Switched to clocksource xen
[    4.986129] AppArmor: AppArmor Filesystem Enabled
[    4.986268] pnp: PnP ACPI: disabled
[    4.989317] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    4.989338] pci 0000:00:1c.0:   bridge window [mem 0xf0500000-0xf05fffff]
[    4.989368] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    4.989385] pci 0000:00:1c.1:   bridge window [mem 0xf0400000-0xf04fffff]
[    4.989416] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    4.989421] pci_bus 0000:00: resource 5 [mem 0x00000000-0x7fffffffff]
[    4.989426] pci_bus 0000:02: resource 1 [mem 0xf0500000-0xf05fffff]
[    4.989430] pci_bus 0000:03: resource 1 [mem 0xf0400000-0xf04fffff]
[    4.989502] NET: Registered protocol family 2
[    4.990168] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    4.990934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    4.991185] TCP: Hash tables configured (established 131072 bind 65536)
[    4.991312] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    4.991481] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    4.991650] NET: Registered protocol family 1
[    4.991697] pci 0000:00:02.0: Video device with shadowed ROM
[    4.991736] pci 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    4.991939] pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    4.992198] PCI: CLS 64 bytes, default 64
[    4.992365] Trying to unpack rootfs image as initramfs...
[    6.491831] Freeing initrd memory: 34188K (ffff880004000000 - ffff880006163000)
[    6.492093] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    6.492176] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    6.492179] hw unit of domain pp0-core 2^-14 Joules
[    6.492182] hw unit of domain package 2^-14 Joules
[    6.492184] hw unit of domain dram 2^-14 Joules
[    6.492187] hw unit of domain pp1-gpu 2^-14 Joules
[    6.492423] Scanning for low memory corruption every 60 seconds
[    6.492982] futex hash table entries: 256 (order: 2, 16384 bytes)
[    6.493010] Initialise system trusted keyring
[    6.493062] audit: initializing netlink subsys (disabled)
[    6.493090] audit: type=2000 audit(1448374966.677:1): initialized
[    6.493811] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    6.497105] zpool: loaded
[    6.497114] zbud: loaded
[    6.497552] VFS: Disk quotas dquot_6.6.0
[    6.497627] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    6.498741] fuse init (API version 7.23)
[    6.499042] Key type big_key registered
[    6.499530] Key type asymmetric registered
[    6.499541] Asymmetric key parser 'x509' registered
[    6.499571] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    6.499621] io scheduler noop registered
[    6.499628] io scheduler deadline registered (default)
[    6.499697] io scheduler cfq registered
[    6.499890] pcieport 0000:00:1c.0: can't find IRQ for PCI INT B; please try using pci=biosirq
[    6.500223] pcieport 0000:00:1c.1: can't find IRQ for PCI INT C; please try using pci=biosirq
[    6.500568] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    6.500573] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    6.500587] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    6.500636] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    6.500639] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    6.500652] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    6.500668] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.500685] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    6.500785] intel_idle: MWAIT substates: 0x11142120
[    6.500789] intel_idle: v0.4 model 0x45
[    6.500791] intel_idle: lapic_timer_reliable_states 0xffffffff
[    6.500805] intel_idle: intel_idle yielding to none
[    6.501697] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    6.504338] Linux agpgart interface v0.103
[    6.508764] brd: module loaded
[    6.510514] loop: module loaded
[    6.511048] libphy: Fixed MDIO Bus: probed
[    6.511055] tun: Universal TUN/TAP device driver, 1.6
[    6.511058] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    6.511140] PPP generic driver version 2.4.2
[    6.511202] xen_netfront: Initialising Xen virtual ethernet driver
[    6.511313] xhci_hcd 0000:00:14.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    6.511393] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.511405] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    6.511517] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
[    6.511539] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    6.511757] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    6.511762] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.511766] usb usb1: Product: xHCI Host Controller
[    6.511770] usb usb1: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
[    6.511773] usb usb1: SerialNumber: 0000:00:14.0
[    6.512005] hub 1-0:1.0: USB hub found
[    6.512026] hub 1-0:1.0: 9 ports detected
[    6.512453] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    6.512463] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    6.512546] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    6.512551] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    6.512554] usb usb2: Product: xHCI Host Controller
[    6.512558] usb usb2: Manufacturer: Linux 4.2.0-18-generic xhci-hcd
[    6.512561] usb usb2: SerialNumber: 0000:00:14.0
[    6.512771] hub 2-0:1.0: USB hub found
[    6.512787] hub 2-0:1.0: 4 ports detected
[    6.513046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.513056] ehci-pci: EHCI PCI platform driver
[    6.513098] ehci-pci 0000:00:1d.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    6.513112] ehci-pci 0000:00:1d.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:1d.0 setup!
[    6.513127] ehci-pci 0000:00:1d.0: init 0000:00:1d.0 fail, -19
[    6.513153] ehci-platform: EHCI generic platform driver
[    6.513173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.513180] ohci-pci: OHCI PCI platform driver
[    6.513203] ohci-platform: OHCI generic platform driver
[    6.513220] uhci_hcd: USB Universal Host Controller Interface driver
[    6.513312] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    6.764541] serio: i8042 KBD port at 0x60,0x64 irq 1
[    6.764742] mousedev: PS/2 mouse device common for all mice
[    6.765087] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    6.765141] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram
[    6.765157] i2c /dev entries driver
[    6.765323] device-mapper: uevent: version 1.0.3
[    6.765452] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[    6.765496] ledtrig-cpu: registered to indicate activity on CPUs
[    6.766288] NET: Registered protocol family 10
[    6.766681] NET: Registered protocol family 17
[    6.766709] Key type dns_resolver registered
[    6.766840] mce: Unable to init device /dev/mcelog (rc: -16)
[    6.767301] Loading compiled-in X.509 certificates
[    6.769700] Loaded X.509 cert 'Build time autogenerated kernel key: 93ad27021225ce1bb4865e4bab1e2b6a5f099429'
[    6.769740] registered taskstats version 1
[    6.769863] zswap: loading zswap
[    6.769868] zswap: using zbud pool
[    6.769879] zswap: using lzo compressor
[    6.770103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    6.778535] Key type trusted registered
[    6.794836] Key type encrypted registered
[    6.794857] AppArmor: AppArmor sha1 policy hashing enabled
[    6.794869] ima: No TPM chip found, activating TPM-bypass!
[    6.794925] evm: HMAC attrs: 0x1
[    6.795619]   Magic number: 7:143:385
[    6.795755] rtc_cmos rtc_cmos: setting system clock to 2015-11-24 14:22:46 UTC (1448374966)
[    6.795842] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    6.795845] EDD information not available.
[    6.796022] PM: Hibernation image not present or could not be loaded.
[    6.797240] Freeing unused kernel memory: 1460K (ffffffff81d37000 - ffffffff81ea4000)
[    6.797244] Write protecting the kernel read-only data: 12288k
[    6.804721] Freeing unused kernel memory: 36K (ffff8800017f7000 - ffff880001800000)
[    6.805029] Freeing unused kernel memory: 296K (ffff880001bb6000 - ffff880001c00000)
[    6.824203] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[    6.876946] random: systemd-udevd urandom read with 8 bits of entropy available
[    6.953327] usb 1-6: New USB device found, idVendor=138a, idProduct=0017
[    6.953336] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    6.953340] usb 1-6: SerialNumber: a5554124fa02
[    6.999501] pps_core: LinuxPPS API ver. 1 registered
[    6.999508] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    7.014870] rtsx_pci 0000:02:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    7.015156] rtsx_pci 0000:02:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
[    7.024892] PTP clock support registered
[    7.044358] [drm] Initialized drm 1.1.0 20060810
[    7.057590] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[    7.057596] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    7.057660] e1000e 0000:00:19.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    7.057859] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    7.124913] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    7.203429] AVX2 version of gcm_enc/dec engaged.
[    7.203435] AES CTR mode by8 optimization enabled
[    7.309114] usb 1-7: New USB device found, idVendor=8087, idProduct=07dc
[    7.309123] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.471681] e1000e 0000:00:19.0 eth0: registered PHC clock
[    7.471691] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:fa:60:1b
[    7.471695] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    7.471741] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    7.471795] ahci 0000:00:1f.2: version 3.0
[    7.471828] ahci 0000:00:1f.2: can't find IRQ for PCI INT B; please try using pci=biosirq
[    7.472023] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x5 impl SATA mode
[    7.472030] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    7.476179] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    7.476556] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    7.479416] scsi host0: ahci
[    7.480896] scsi host1: ahci
[    7.481409] scsi host2: ahci
[    7.481530] ata1: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c100 irq 32
[    7.481534] ata2: DUMMY
[    7.481538] ata3: SATA max UDMA/133 abar m2048@0xf063c000 port 0xf063c200 irq 32
[    7.481695] i915 0000:00:02.0: enabling device (0006 -> 0007)
[    7.481714] i915 0000:00:02.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    7.484366] [drm] Memory usable by graphics device = 2048M
[    7.484374] [drm] Replacing VGA console driver
[    7.488627] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2113e4ed063, max_idle_ns: 440795286347 ns
[    7.624361] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    7.624367] [drm] Driver supports precise vblank timestamp query.
[    7.624625] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=mem
[    7.654016] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[    7.708140] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    7.729899] fbcon: inteldrmfb (fb0) is primary device
[    7.732600] usb 1-8: New USB device found, idVendor=04f2, idProduct=b39a
[    7.732603] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    7.732606] usb 1-8: Product: Integrated Camera
[    7.732609] usb 1-8: Manufacturer: SunplusIT INC.
[    7.796152] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    7.798021] ata1.00: supports DRM functions and may not be fully accessible
[    7.798098] ata1.00: READ LOG DMA EXT failed, trying unqueued
[    7.798133] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.798136] ata1.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0BB6Q, max UDMA/133
[    7.798139] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    7.798329] ata1.00: supports DRM functions and may not be fully accessible
[    7.798389] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[    7.798394] ata1.00: configured for UDMA/133
[    7.798563] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 840  BB6Q PQ: 0 ANSI: 5
[    7.798976] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    7.799061] sd 0:0:0:0: [sda] Write Protect is off
[    7.799065] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.799093] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.799464] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.801691]  sda: sda1 sda2 sda3 sda4 sda5 sda6
[    7.802422] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.808199] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    7.808620] ata3.00: ATA-9: SanDisk SSD U110 16GB, U21B001, max UDMA/133
[    7.808624] ata3.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[    7.808910] ata3.00: configured for UDMA/133
[    7.809049] scsi 2:0:0:0: Direct-Access     ATA      SanDisk SSD U110 001  PQ: 0 ANSI: 5
[    7.809432] sd 2:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[    7.809515] sd 2:0:0:0: [sdb] Write Protect is off
[    7.809520] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.809547] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.809889] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    7.812496]  sdb: sdb1
[    7.812921] sd 2:0:0:0: [sdb] Attached SCSI disk
[    8.488199] clocksource: Switched to clocksource tsc
[    8.856719] Console: switching to colour frame buffer device 240x67
[    8.868694] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    8.868699] i915 0000:00:02.0: registered panic notifier
[   18.830731] NET: Registered protocol family 38
[   19.556559] raid6: sse2x1   gen()  2552 MB/s
[   19.624548] raid6: sse2x1   xor()  1980 MB/s
[   19.692545] raid6: sse2x2   gen()  3252 MB/s
[   19.760546] raid6: sse2x2   xor()  2163 MB/s
[   19.828549] raid6: sse2x4   gen()  3754 MB/s
[   19.896535] raid6: sse2x4   xor()  2622 MB/s
[   19.964534] raid6: avx2x1   gen()  4964 MB/s
[   20.032534] raid6: avx2x2   gen()  5800 MB/s
[   20.100541] raid6: avx2x4   gen()  6723 MB/s
[   20.100544] raid6: using algorithm avx2x4 gen() 6723 MB/s
[   20.100547] raid6: using avx2x2 recovery algorithm
[   20.107670] xor: automatically using best checksumming function:
[   20.144534]    avx       :  7679.000 MB/sec
[   20.196959] Btrfs loaded
[   20.283002] random: nonblocking pool is initialized
[   20.306777] BTRFS: device fsid f3feacbe-ef73-430f-937d-e1232da77e68 devid 1 transid 3467 /dev/mapper/sda6_crypt
[   20.374443] BTRFS info (device dm-0): disk space caching is enabled
[   20.374451] BTRFS: has skinny extents
[   20.722415] BTRFS: detected SSD devices, enabling SSD mode
[   20.963880] systemd[1]: RTC configured in localtime, applying delta of 0 minutes to system time.
[   21.026349] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[   21.038215] systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[   21.038336] systemd[1]: Detected virtualization xen.
[   21.038350] systemd[1]: Detected architecture x86-64.
[   21.039160] systemd[1]: Set hostname to <feynman>.
[   21.375889] systemd[1]: Created slice Root Slice.
[   21.376329] systemd[1]: Created slice User and Session Slice.
[   21.376514] systemd[1]: Listening on Journal Socket.
[   21.376689] systemd[1]: Listening on fsck to fsckd communication Socket.
[   21.377107] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   21.377145] systemd[1]: Reached target User and Group Name Lookups.
[   21.377242] systemd[1]: Listening on Journal Socket (/dev/log).
[   21.377379] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   21.377466] systemd[1]: Listening on udev Kernel Socket.
[   21.377492] systemd[1]: Reached target Remote File Systems (Pre).
[   21.377596] systemd[1]: Listening on udev Control Socket.
[   21.377854] systemd[1]: Created slice System Slice.
[   21.381924] systemd[1]: Mounting Debug File System...
[   21.382306] systemd[1]: Created slice system-getty.slice.
[   21.382698] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[   21.383002] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   21.388390] systemd[1]: Starting Increase datagram queue length...
[   21.404795] systemd[1]: Starting Setup Virtual Console...
[   21.416975] systemd[1]: Started Braille Device Support.
[   21.441479] systemd[1]: Starting Uncomplicated firewall...
[   21.457472] systemd[1]: Starting udev Coldplug all Devices...
[   21.504940] systemd[1]: Mounting Huge Pages File System...
[   21.505389] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   21.508357] systemd[1]: Mounting POSIX Message Queue File System...
[   21.553052] systemd[1]: Starting Load Kernel Modules...
[   21.553180] systemd[1]: Reached target Slices.
[   21.553489] systemd[1]: Listening on Journal Audit Socket.
[   21.553568] systemd[1]: Reached target Swap.
[   21.578036] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   21.578299] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   21.596913] systemd[1]: Mounted Debug File System.
[   21.600223] systemd[1]: Mounted POSIX Message Queue File System.
[   21.601578] systemd[1]: Mounted Huge Pages File System.
[   21.604920] systemd[1]: Started Increase datagram queue length.
[   21.607624] systemd[1]: Started Setup Virtual Console.
[   21.611790] systemd[1]: Started Uncomplicated firewall.
[   21.622662] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   21.624076] lp: driver loaded but no devices found
[   21.654236] ppdev: user-space parallel port driver
[   21.659365] parport_pc parport_pc.956: Unable to set coherent dma mask: disabling DMA
[   21.659567] parport_pc parport_pc.888: Unable to set coherent dma mask: disabling DMA
[   21.659767] parport_pc parport_pc.632: Unable to set coherent dma mask: disabling DMA
[   21.670320] systemd[1]: Started Load Kernel Modules.
[   21.744015] systemd[1]: Mounting FUSE Control File System...
[   21.768945] systemd[1]: Starting Apply Kernel Variables...
[   21.806484] systemd[1]: Starting Create Static Device Nodes in /dev...
[   21.806675] systemd[1]: Listening on Syslog Socket.
[   21.814720] systemd[1]: Starting Journal Service...
[   21.835792] systemd[1]: Mounted FUSE Control File System.
[   21.848139] systemd[1]: Started Apply Kernel Variables.
[   21.858421] systemd[1]: Started Create Static Device Nodes in /dev.
[   21.909267] systemd[1]: Starting udev Kernel Device Manager...
[   21.989230] systemd[1]: Started udev Coldplug all Devices.
[   22.050359] systemd[1]: Started Journal Service.
[   22.165465] BTRFS info (device dm-0): disk space caching is enabled
[   22.349799] systemd-journald[389]: Received request to flush runtime journal from PID 1
[   23.064897] mei_me 0000:00:16.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   23.078433] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.158670] media: Linux media interface: v0.10
[   23.267119] Bluetooth: Core ver 2.20
[   23.267159] NET: Registered protocol family 31
[   23.267163] Bluetooth: HCI device and connection manager initialized
[   23.267170] Bluetooth: HCI socket layer initialized
[   23.267176] Bluetooth: L2CAP socket layer initialized
[   23.267188] Bluetooth: SCO socket layer initialized
[   23.312542] Linux video capture interface: v2.00
[   23.384956] usbcore: registered new interface driver btusb
[   23.401856] Bluetooth: hci0: read Intel version: 370710018002030d00
[   23.414635] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   23.531718] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b39a)
[   23.543145] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input1
[   23.543280] usbcore: registered new interface driver uvcvideo
[   23.543285] USB Video Class driver (1.1.1)
[   23.612181] Intel(R) Wireless WiFi driver for Linux
[   23.612189] Copyright(c) 2003- 2015 Intel Corporation
[   23.612725] iwlwifi 0000:03:00.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   23.614889] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   23.661908] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-15.ucode failed with error -2
[   23.662398] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-7260-14.ucode failed with error -2
[   23.671825] iwlwifi 0000:03:00.0: loaded firmware version 25.30.13.0 op_mode iwlmvm
[   23.788641] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[   23.793071] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   23.793668] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   24.020185] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   24.023728] intel_rapl: Found RAPL domain package
[   24.023738] intel_rapl: Found RAPL domain core
[   24.023743] intel_rapl: Found RAPL domain uncore
[   24.023749] intel_rapl: Found RAPL domain dram
[   24.393313] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   24.824996] snd_hda_intel 0000:00:03.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   24.825260] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   24.830426] snd_hda_intel 0000:00:1b.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[   24.899994] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   24.900005] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   24.900010] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[   24.900014] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   24.900017] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   24.900022] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[   24.900026] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[   24.900030] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[   24.911488] ACPI Exception: AE_BAD_PARAMETER, Thread 79174528 could not acquire Mutex [0x1] (20150619/utmutex-285)
[   24.911501] ACPI Exception: AE_BAD_PARAMETER, Thread 79174528 could not acquire Mutex [0x1] (20150619/utmutex-285)
[   24.931452] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input2
[   24.931586] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input3
[   24.931710] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input4
[   24.941179] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[   24.941308] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[   24.941430] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[   24.941545] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[   25.468166] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[   25.557707] cfg80211: World regulatory domain updated:
[   25.557717] cfg80211:  DFS Master region: unset
[   25.557720] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   25.557726] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   25.557730] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   25.557734] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   25.557738] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   25.557743] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   25.557747] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   25.557751] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   25.557754] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   26.222611] audit: type=1400 audit(1448374985.920:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=753 comm="apparmor_parser"
[   26.261003] audit: type=1400 audit(1448374985.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=753 comm="apparmor_parser"
[   26.261024] audit: type=1400 audit(1448374985.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=753 comm="apparmor_parser"
[   26.283788] audit: type=1400 audit(1448374985.980:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=753 comm="apparmor_parser"
[   26.283811] audit: type=1400 audit(1448374985.980:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
[   26.283823] audit: type=1400 audit(1448374985.980:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=753 comm="apparmor_parser"
[   26.283838] audit: type=1400 audit(1448374985.980:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
[   26.403482] audit: type=1400 audit(1448374986.100:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=753 comm="apparmor_parser"
[   26.403503] audit: type=1400 audit(1448374986.100:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=753 comm="apparmor_parser"
[   26.403514] audit: type=1400 audit(1448374986.100:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=753 comm="apparmor_parser"
[   26.972095] cgroup: new mount options do not match the existing superblock, will be ignored
[   27.711462] xen:xen_evtchn: Event-channel device installed
[   27.918541] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   27.918550] Bluetooth: BNEP filters: protocol multicast
[   27.918562] Bluetooth: BNEP socket layer initialized
[   28.596943] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 895 (update-binfmts)
[   29.794992] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   30.089275] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[   30.131099] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   30.132390] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   30.136989] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   30.321952] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   30.322549] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[   30.349435] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   30.690025] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   30.939168] vgaarb: this pci device is not a vga device
[   30.965923] vgaarb: this pci device is not a vga device
[   34.177471] wlp3s0: authenticate with 4c:5e:0c:f8:50:27
[   34.186313] wlp3s0: send auth to 4c:5e:0c:f8:50:27 (try 1/3)
[   34.233863] wlp3s0: authenticated
[   34.237283] wlp3s0: associate with 4c:5e:0c:f8:50:27 (try 1/3)
[   34.244097] wlp3s0: RX AssocResp from 4c:5e:0c:f8:50:27 (capab=0x431 status=0 aid=2)
[   34.246880] wlp3s0: associated
[   34.246932] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   37.830740] Bluetooth: RFCOMM TTY layer initialized
[   37.830758] Bluetooth: RFCOMM socket layer initialized
[   37.830771] Bluetooth: RFCOMM ver 1.11