berichan

## RaspberryPiSysBot.md

      
              1 file
            
          
              3 forks
            
          
              16 comments
            
          
              7 stars
            
          
                berichan
                / RaspberryPiSysBot.md
            
            
              Last active
              June 8, 2023 16:36
            
              
                How to compile SysBot.NET for linux-arm64 and run it on a raspberry pi
              
          
    Preface

My Pokemon shiny raid seed checker https://cute.berichan.net/ which is essentially a dudu bot clone runs on a Raspberry Pi 4 so I thought I'd write down how I compiled an arm-64 optimized version of SysBot.NET/Pokemon.
This guide assumes you have a working and 64-bit compatible Raspberry Pi with the 64-bit version of Raspbian installed and have at least a basic understanding of how to use Raspbian/Linux. If you can't get this set up, you should ask for help in the official Raspberry Pi forums. Note, the 64-bit OS is only installable on the Pi 3 and Pi 4 (and onwards) devices.
32-bit compilation (not covered) is easier but significantly slower for a variety of things SysBot.NET uses, so I don't recommend it.
Make sure your pi is up-to-date by running sudo apt-get update then sudo apt-get dist-upgrade.
Note, This guide also assumes you have already used (with success) SysBot.NET at least once and are able to copy over your c

  
## ProcessRestarter.cs
// This is a very simple program that takes in a config file (config.txt)
// in the same directory as the application and creates a process with
// (optional, can stay blank) arguments, and restarts it whenever it
// dies or (optionally) every x number of seconds/minutes/hours/days etc.
// You can also have it set up to look out for a certain line in the
// output and restart it whenever it sees that line (uses String.Contains)
// Can obviously be much cleaner.
// 2020 Berichan https://berichan.net/

using System;

## ShinyDenQuickGuide.md

      
              1 file
            
          
              0 forks
            
          
              3 comments
            
          
              3 stars
            
          
                berichan
                / ShinyDenQuickGuide.md
            
            
              Last active
              May 16, 2023 03:13
            
              
                Quick guide to getting a shiny den using cute.berichan.net or other dudu bot style seed checkers.
              
          
    Preface

This isn't intended as a thorough guide to getting a shiny den. If you're looking for an extensive guide, consider using the one by /r/PokemonMaxRaids which is available here.
A hacked switch is NOT required to use this guide.
If you're just looking for the seed checker (シードチェック): https://cute.berichan.net/
Setting up


Make sure you have autosave turned off in settings, if you don't then you will lose your den as soon as you finish it.
Put a wishing piece in the den you want shinies from. Use https://www.pokeatlas.com/ to take a look at what each den contains (Isle of armor can be toggled from the top bar)
	// This is a very simple program that takes in a config file (config.txt)
	// in the same directory as the application and creates a process with
	// (optional, can stay blank) arguments, and restarts it whenever it
	// dies or (optionally) every x number of seconds/minutes/hours/days etc.
	// You can also have it set up to look out for a certain line in the
	// output and restart it whenever it sees that line (uses String.Contains)
	// Can obviously be much cleaner.
	// 2020 Berichan https://berichan.net/

	using System;