Using the Sparkfun Data Service with an UNO WiFi (via REST)

UNOWiFi_Sparkfun_REST.ino

/*
|| @author   Brett Hagman <brett@roguerobotics.com>
|| @url      https://roguerobotics.com/
||
|| @description
|| | A simple example of an UNO WiFi sending data to the Sparkfun Data Service.
|| | https://data.sparkfun.com/
|| |
|| | In the Arduino IDE, you will need to add the "Arduino Uno WiFi Dev Ed Library" in the Library Manager.
|| | Sketch > Include Library > Manage Libraries...
|| #
*/

// Sparkfun Data Service REST URL format:
// http://data.sparkfun.com/input/[publicKey]?private_key=[privateKey]&leveltrigger=[value]&temperature=[value]

#include <UnoWiFiDevEd.h>

#define CONNECTOR     "rest"
#define SERVER        "data.sparkfun.com"
#define PUBLICKEY     "yourpublickey"
#define PRIVATEKEY    "yourprivatekey"
#define TIMEBETWEEN   9000

#define TRIGGERPIN 11

void setup()
{
  pinMode(TRIGGERPIN, INPUT);
  digitalWrite(TRIGGERPIN, HIGH);

  Ciao.begin();
}


void loop()
{
  String uri = "/input/";
  uri += PUBLICKEY;
  uri += "?private_key=";
  uri += PRIVATEKEY;
  uri += "&temperature=";
  uri += String(getTemp());
  uri += "&leveltrigger=";
  uri += String(readTrigger());

  // Display message in the WiFi Console:
  Ciao.println("Sending data...");
  Ciao.println(uri);

  // Upload the data, and wait for a response.
  CiaoData data = Ciao.write(CONNECTOR, SERVER, uri);

  if (!data.isEmpty())
  {
    Ciao.println( "State: " + String (data.get(1)) );
    Ciao.println( "Response: " + String (data.get(2)) );
  }
  else
  {
    Ciao.println("Write Error");
  }

  // Wait the required time between requests to store data.
  delay(TIMEBETWEEN);
}


int readTrigger()
{
  // When triggered, the TRIGGERPIN registers low.
  if (digitalRead(TRIGGERPIN))
  {
    return 0;
  }
  else
  {
    return 1;
  }
}


// http://playground.arduino.cc/Main/InternalTemperatureSensor

double getTemp(void)
{
  unsigned int wADC;
  double t;

  // The internal temperature has to be used
  // with the internal reference of 1.1V.
  // Channel 8 can not be selected with
  // the analogRead function yet.

  // Set the internal reference and mux.
  ADMUX = (_BV(REFS1) | _BV(REFS0) | _BV(MUX3));
  ADCSRA |= _BV(ADEN);  // enable the ADC

  delay(20);            // wait for voltages to become stable.

  ADCSRA |= _BV(ADSC);  // Start the ADC

  // Detect end-of-conversion
  while (bit_is_set(ADCSRA,ADSC));

  // Reading register "ADCW" takes care of how to read ADCL and ADCH.
  wADC = ADCW;

  // The offset of 324.31 could be wrong. It is just an indication.
  t = (wADC - 324.31 ) / 1.22;

  // The returned temperature is in degrees Celsius.
  return (t);
}