Inovelli LZW30-SN ZwaveJS Blueprint

inovelliLZW30.yaml

blueprint:
  name: Inovelli Red Series LZW30-SN Switch (ZWave-JS)
  description: Create automations for the Inovelli Red Series LZW30-SN Switch using the ZWave-JS integration.
  domain: automation
  input:
    zwave_device:
      name: Inovelli Switch
      description: "List of available inovelli LZW30-SN switch."
      selector:
        device:
          integration: zwave_js
          manufacturer: Inovelli
    ## Config Press 1 time
    config_button:
      name: Button C - Config press 1x
      description: "Action to run, when the config button is pressed one time."
      default: []
      selector:
        action:
    ### Up Button Actions###
    ## Paddle Press 1 time
    button_a:
      name: Button A - Up/On press 1x
      description: "Action to run, when the button is pressed one time."
      default: []
      selector:
        action:
    ## Paddle Press 2 times
    button_a2:
      name: Button A - Up/On press 2x
      description: "Action to run, when the button is pressed two times."
      default: []
      selector:
        action:
    ## Paddle Press 3 times
    button_a3:
      name: Button A - Up/On press 3x
      description: "Action to run, when the button is pressed three times."
      default: []
      selector:
        action:
    ## Paddle Press 4 times
    button_a4:
      name: Button A - Up/On press 4x
      description: "Action to run, when the button is pressed four times."
      default: []
      selector:
        action:
    ## Paddle Press 5 times
    button_a5:
      name: Button A - Up/On press 5x
      description: "Action to run, when the button is pressed five times."
      default: []
      selector:
        action:
    ## Paddle Hold
    button_a6:
      name: Button A - Up/On Hold
      description: "Action to run, when the button is held down."
      default: []
      selector:
        action:

    ### Down Button Actions ###
    ## Paddle Press 1 time
    button_b:
      name: Button B - Down/Off press 1x
      description: "Action to run, when the button is pressed one time."
      default: []
      selector:
        action:
    ## Paddle Press 2 times
    button_b2:
      name: Button B - Down/Off press 2x
      description: "Action to run, when the button is pressed two times."
      default: []
      selector:
        action:
    ## Paddle Press 3 times
    button_b3:
      name: Button B - Down/Off press 3x
      description: "Action to run, when the button is pressed three times."
      default: []
      selector:
        action:
    ## Paddle Press 4 times
    button_b4:
      name: Button B - Down/Off press 4x
      description: "Action to run, when the button is pressed four times."
      default: []
      selector:
        action:
    ## Paddle Press 5 times
    button_b5:
      name: Button B - Down/Off press 5x
      description: "Action to run, when the button is pressed five times."
      default: []
      selector:
        action:
    ## Paddle Hold
    button_b6:
      name: Button B - Down/Off Hold
      description: "Action to run, when the button is held down."
      default: []
      selector:
        action:
mode: single
max_exceeded: silent
variables:
  device_id: !input zwave_device
trigger:
  - platform: event
    event_type: zwave_js_value_notification
condition: "{{ trigger.event.data.device_id == device_id }}"
action:
  - variables:
      button_id: "{{ trigger.event.data.property_key_name }}"
      press_count: "{{ trigger.event.data.value }}"
  - service: "logbook.log"
    data:
      name: "Button Id"
      message: "{{ button_id }}"
  - service: "logbook.log"
    data:
      name: "Press Count"
      message: "{{ press_count }}"
  - service: "logbook.log"
    data:
      name: "Device"
      message: "{{ zwave_device }}"
  - choose:
      - conditions: '{{ button_id == "003" and press_count == "KeyPressed" }}'
        sequence: !input config_button
      - conditions: '{{ button_id == "002" and press_count == "KeyPressed" }}'
        sequence: !input button_a
      - conditions: '{{ button_id == "001" and press_count == "KeyPressed" }}'
        sequence: !input button_b
      - conditions: '{{ button_id == "002" and press_count == "KeyPressed2x" }}'
        sequence: !input button_a2
      - conditions: '{{ button_id == "001" and press_count == "KeyPressed2x" }}'
        sequence: !input button_b2
      - conditions: '{{ button_id == "002" and press_count == "KeyPressed3x" }}'
        sequence: !input button_a3
      - conditions: '{{ button_id == "001" and press_count == "KeyPressed3x" }}'
        sequence: !input button_b3
      - conditions: '{{ button_id == "002" and press_count == "KeyPressed4x" }}'
        sequence: !input button_a4
      - conditions: '{{ button_id == "001" and press_count == "KeyPressed4x" }}'
        sequence: !input button_b4
      - conditions: '{{ button_id == "002" and press_count == "KeyPressed5x" }}'
        sequence: !input button_a5
      - conditions: '{{ button_id == "001" and press_count == "KeyPressed5x" }}'
        sequence: !input button_b5
      - conditions: '{{ button_id == "002" and press_count == "KeyHeldDown" }}'
        sequence: !input button_a6
      - conditions: '{{ button_id == "001" and press_count == "KeyHeldDown" }}'
        sequence: !input button_b6

any feedback on how to use this? I'm running home assistant and have the switch added via z wave but Have no idea how to use it.

This is the blueprint in order to setup automations for the switch. You can import this file to a blueprint in order to use it.

Where are you getting hung up?