I hereby claim:
- I am bilson on github.
- I am bilson (https://keybase.io/bilson) on keybase.
- I have a public key ASD-chH0_e31RUohUMCt_J3N57eyQdpv4wpUX8sb-gbcSAo
To claim this, I am signing this object:
I hereby claim:
To claim this, I am signing this object:
#!/bin/bash | |
cd ~ | |
sudo apt-get update | |
sudo apt-get install -y git cmake libusb-1.0-0.dev build-essential | |
cat <<EOF >no-rtl.conf | |
blacklist dvb_core | |
blacklist dvb_usb_rtl28xxu |
#!/bin/bash | |
cd ~ | |
sudo apt-get update | |
sudo apt-get install curl git cmake libusb-1.0-0.dev build-essential | |
cat <<EOF >no-rtl.conf | |
blacklist dvb_core | |
blacklist dvb_usb_rtl28xxu |
#!/bin/bash | |
#set -e | |
# install-wifi - 12/02/2018 - by MrEngman. | |
UPDATE_SELF=${UPDATE_SELF:-1} | |
UPDATE_URI="http://downloads.fars-robotics.net/wifi-drivers/install-wifi" | |
ROOT_PATH=${ROOT_PATH:-"/"} | |
WORK_PATH=${WORK_PATH:-"${ROOT_PATH}/root"} |
#!/bin/bash | |
CURDIR=$(pwd) | |
CYAN='\033[0;36m' | |
GREEN='\033[0;32m' | |
NC='\033[0m' | |
ORANGE='\033[0;33m' | |
PURPLE='\033[0;35m' | |
RED='\033[0;31m' | |
YELLOW='\033[1;33m' |
#install depencies | |
apt install python-dev gcc make gcc binutils build-essential | |
#get pjsip | |
wget http://www.pjsip.org/release/2.6/pjproject-2.6.tar.bz2 | |
tar -xjf pjproject-2.6.tar.bz2 | |
cd pjproject-2.6 | |
#configure | |
export CFLAGS="$CFLAGS -fPIC" | |
#build pjsip |
#!/bin/bash | |
# This script allows you to chroot ("work on") | |
# the raspbian sd card as if it's the raspberry pi | |
# on your Ubuntu desktop/laptop | |
# just much faster and more convenient | |
# credits: https://gist.github.com/jkullick/9b02c2061fbdf4a6c4e8a78f1312a689 | |
# make sure you have issued |
The repository for the assignment is public and Github does not allow the creation of private forks for public repositories.
The correct way of creating a private frok by duplicating the repo is documented here.
For this assignment the commands are:
git clone --bare git@github.com:usi-systems/easytrace.git
You can use ffmpeg to directly pull frames off of a dahua 4300s at full resolution. May be a good alternative to pricey dvrs which likely cannot record at full resolution, may not work with the camera, or are prohibitevly expensive
Simple stream to file. Full resolution
ffmpeg -loglevel debug -rtsp_transport tcp -i "rtsp://admin:admin@198.175.207.61:554/live" \
-c copy -map 0 foo.mp4