april

# this forces Arena into full screen mode on startup, set back to 3 to reset
# note that if you go into the Arena "Graphics" preference panel, it will reset all of these
# and you will need to run these commands again
defaults write com.wizards.mtga "Screenmanager Fullscreen mode" -integer 0
defaults write com.wizards.mtga "Screenmanager Resolution Use Native" -integer 0

# you can also replace the long complicated integer bit with any other scaled 16:9
# resolution your system supports.
# to find the scaled resolutions, go to System Preferences --> Display and then
# divide the width by 16 and multiple by 9. on my personal system this ends up

ericdouglas

// 4 spaces to 2 spaces
%s;^\(\s\+\);\=repeat(' ', len(submatch(0))/2);g

// Tab to 2 spaces
:%s/\t/  /g

hellerbarde

Latency numbers every programmer should know

L1 cache reference ......................... 0.5 ns
Branch mispredict ............................ 5 ns
L2 cache reference ........................... 7 ns
Mutex lock/unlock ........................... 25 ns
Main memory reference ...................... 100 ns             
Compress 1K bytes with Zippy ............. 3,000 ns  =   3 µs
Send 2K bytes over 1 Gbps network ....... 20,000 ns  =  20 µs
SSD random read ........................ 150,000 ns  = 150 µs

Read 1 MB sequentially from memory ..... 250,000 ns = 250 µs

jboner

Latency Comparison Numbers (~2012)
----------------------------------
L1 cache reference                           0.5 ns
Branch mispredict                            5   ns
L2 cache reference                           7   ns                      14x L1 cache
Mutex lock/unlock                           25   ns
Main memory reference                      100   ns                      20x L2 cache, 200x L1 cache
Compress 1K bytes with Zippy             3,000   ns        3 us
Send 1K bytes over 1 Gbps network       10,000   ns       10 us
Read 4K randomly from SSD*             150,000   ns      150 us          ~1GB/sec SSD