bistory

compaction_throughput_mb_per_sec: 16
row_cache_save_period: 0
cross_node_timeout: false
counter_cache_save_period: 7200
sstable_preemptive_open_interval_in_mb: 50
internode_compression: all
storage_port: 7000
key_cache_save_period: 14400
inter_dc_tcp_nodelay: false
start_rpc: true

bistory

# This file contains pin mappings for the Anycubic i3 Mega with
# Ultrabase from 2017. (This config may work on an Anycubic i3 Mega v1
# prior to the Ultrabase if you comment out the definition of the
# endstop_pin in the stepper_z1 section.) To use this config, the
# firmware should be compiled for the AVR atmega2560.

# See the example.cfg file for a description of available parameters.

[stepper_x]
step_pin: PF0

bistory

root = true

[*]
indent_style = space
indent_size = 2
end_of_line = lf
charset = utf-8
trim_trailing_whitespace = true
insert_final_newline = true

bistory

<?php

use PhpCsFixer\Config;
use PhpCsFixer\Finder;

$rules = [
    '@PSR1' => true,
    '@PSR2' => true,
    'array_syntax' => ['syntax' => 'short'],
    'binary_operator_spaces' => [

bistory

<?php

use PhpCsFixer\Config;
use PhpCsFixer\Finder;

$rules = [
    '@PSR1' => true,
    '@PSR2' => true,
    '@PHP74Migration' => true,
    '@PHP80Migration' => true,

bistory

#####################################################################
#       Mainsail
#####################################################################

[virtual_sdcard]
path: ~/gcode_files

[display_status]

[pause_resume]

bistory

#####################################################################
#       Mainsail
#####################################################################

[virtual_sdcard]
path: ~/gcode_files

[display_status]

[pause_resume]

bistory

[z_calibration]

## update these variable according to the documentation here https://github.com/protoloft/klipper_z_calibration
## you then should call CALIBRATE_Z as one of the last lines on your PRINT_START to set the Z offset dinamically

#   The X and Y coordinates (in mm) for clicking the nozzle on the
#   Z endstop.
nozzle_xy_position: X,Y
#   The X and Y coordinates (in mm) for clicking the probe's switch body
#   on the Z endstop.

bistory

# Macros for setting the status leds on the Voron enclosure (or for any neopixel-type leds).
#
# You will need to configure a neopixel (or other addressable led, such as dotstar). See
# https://www.klipper3d.org/Config_Reference.html#neopixel for configuration details.
#
# CONFIGURATION
#
# Example neopixel configuration:
# [neopixel caselight]
# pin: <your pin>

bistory

#####################################################################
#	LED Control
#####################################################################

[neopixel caselight]
pin: PD3
#   The pin connected to the neopixel. This parameter must be
#   provided.
chain_count: 54
#   The number of Neopixel chips that are "daisy chained" to the