dmesg w/ mac-base

dmesg

[    0.000000] Linux version 5.15.119 (bluecmd@svc-lab1) (mips64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23383-0fc6ef009b) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Jul 18 16:35:20 2023
[    0.000000] Skipping L2 locking due to reduced L2 cache size
[    0.000000] CVMSEG size: 0 cache lines (0 bytes)
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 000d9301 (Cavium Octeon II)
[    0.000000] Kernel sections are not in the memory maps
[    0.000000] Wasting 278528 bytes for tracking 4352 unused pages
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Using appended Device Tree.
[    0.000000] software IO TLB: mapped [mem 0x0000000002f15000-0x0000000006f15000] (64MB)
[    0.000000] Primary instruction cache 37kB, virtually tagged, 37 way, 8 sets, linesize 128 bytes.
[    0.000000] Primary data cache 32kB, 32-way, 8 sets, linesize 128 bytes.
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000001100000-0x00000000efffffff]
[    0.000000]   Normal   [mem 0x00000000f0000000-0x000000010effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000001100000-0x0000000002dfffff]
[    0.000000]   node   0: [mem 0x0000000002f00000-0x000000000eefffff]
[    0.000000]   node   0: [mem 0x000000000f200000-0x000000000fdfffff]
[    0.000000]   node   0: [mem 0x0000000020000000-0x00000000efffffff]
[    0.000000]   node   0: [mem 0x00000000f0001000-0x00000000ffffffff]
[    0.000000]   node   0: [mem 0x0000000100001000-0x000000010effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000001100000-0x000000010effffff]
[    0.000000] On node 0, zone DMA32: 4352 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 256 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 768 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 512 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 1 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 1 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.000000] percpu: Embedded 16 pages/cpu s24864 r8192 d32480 u65536
[    0.000000] pcpu-alloc: s24864 r8192 d32480 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1022362
[    0.000000] Kernel command line:  rootfstype=squashfs rootwait root=PARTUUID=01029395-02 console=ttyS0,115200
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 3986324K/4154360K available (8104K kernel code, 874K rwdata, 2008K rodata, 1288K init, 17410K bss, 168036K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 127
[   19.245526] clocksource: OCTEON_CVMCOUNT: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[   19.256533] Calibrating delay loop (skipped) preset value.. 2000.00 BogoMIPS (lpj=10000000)
[   19.264762] pid_max: default: 32768 minimum: 301
[   19.269799] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[   19.277050] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[   19.286625] Performance counters: octeon PMU enabled, 2 64-bit counters available to each CPU, irq 7
[   19.295730] rcu: Hierarchical SRCU implementation.
[   19.301004] smp: Bringing up secondary CPUs ...
[   19.305781] SMP: Booting CPU01 (CoreId  1)...
[   19.310026] CPU1 revision is: 000d9301 (Cavium Octeon II)
[   19.310466] SMP: Booting CPU02 (CoreId  2)...
[   19.320077] CPU2 revision is: 000d9301 (Cavium Octeon II)
[   19.320525] SMP: Booting CPU03 (CoreId  3)...
[   19.330136] CPU3 revision is: 000d9301 (Cavium Octeon II)
[   19.330210] smp: Brought up 1 node, 4 CPUs
[   19.342918] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[   19.352617] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
[   19.360296] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[   19.374213] PCIe: Initializing port 0
[   19.388738] PCIe: Port 0 stuck in reset, skipping.
[   19.393363] PCIe: Initializing port 1
[   19.413746] PCIe: Port 1 link active, 1 lanes, speed gen2
[   19.545507] SCSI subsystem initialized
[   19.549264] libata version 3.00 loaded.
[   19.549427] usbcore: registered new interface driver usbfs
[   19.554794] usbcore: registered new interface driver hub
[   19.560111] usbcore: registered new device driver usb
[   19.565151] EDAC MC: Ver: 3.0.0
[   19.569151] PCI host bridge to bus 0000:00
[   19.573122] pci_bus 0000:00: root bus resource [mem 0x1000000000000]
[   19.579427] pci_bus 0000:00: root bus resource [io  0x0000]
[   19.585006] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[   19.594032] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[   19.600547] PCI host bridge to bus 0000:01
[   19.604574] pci_bus 0000:01: root bus resource [mem 0x11c00f0000000-0x11c0fffffffff] (bus address [0xf0000000-0xfffffffff])
[   19.615711] pci_bus 0000:01: root bus resource [io  0x100000000-0x1ffffffff] (bus address [0x0000-0xffffffff])
[   19.625697] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[   19.633658] pci 0000:01:00.0: [104c:8241] type 00 class 0x0c0330
[   19.639629] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
[   19.646407] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff 64bit]
[   19.653279] pci 0000:01:00.0: supports D1 D2
[   19.657436] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[   19.664700] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[   19.671175] pci 0000:01:00.0: BAR 0: assigned [mem 0x11c0100000000-0x11c010000ffff 64bit]
[   19.679339] pci 0000:01:00.0: BAR 2: assigned [mem 0x11c0100010000-0x11c0100011fff 64bit]
[   19.687781] clocksource: Switched to clocksource OCTEON_CVMCOUNT
[   19.694424] NET: Registered PF_INET protocol family
[   19.699350] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[   19.709423] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[   19.717852] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[   19.725539] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[   19.733761] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[   19.741383] TCP: Hash tables configured (established 32768 bind 32768)
[   19.747873] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   19.754542] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   19.761864] NET: Registered PF_UNIX/PF_LOCAL protocol family
[   19.767408] pci 0000:01:00.0: enabling device (0000 -> 0002)
[   19.773067] PCI: CLS 64 bytes, default 128
[   19.782318] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[   19.794346] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[   19.800190] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[   19.811972] octeon_gpio 1070000000800.gpio-controller: OCTEON GPIO driver probed.
[   19.819571] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[   19.826218] printk: console [ttyS0] disabled
[   19.830398] 1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 34, base_baud = 37500000) is a OCTEON
[   19.840185] printk: console [ttyS0] enabled
[   19.848515] printk: bootconsole [early0] disabled
[   19.858180] 1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 35, base_baud = 37500000) is a OCTEON
[   19.868302] octeon_rng octeon_rng: Octeon Random Number Generator
[   19.878455] loop: module loaded
[   19.881922] Driver 'pata_octeon_cf' needs updating - please use bus_type methods
[   19.889646] physmap-flash 1ec00000.nor: physmap platform flash device: [mem 0x1ec00000-0x1fbfffff]
[   19.898693] 1ec00000.nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002101
[   19.908744] Amd/Fujitsu Extended Query Table at 0x0040
[   19.913906]   Amd/Fujitsu Extended Query version 1.5.
[   19.918980] number of CFI chips: 1
[   19.922590] 2 fixed-partitions partitions found on MTD device 1ec00000.nor
[   19.929503] Creating 2 MTD partitions on "1ec00000.nor":
[   19.934830] 0x000000000000-0x000000200000 : "bootloader"
[   19.940503] 0x000000fe0000-0x000001000000 : "environment"
[   19.948593] mdio_octeon 1180000001800.mdio: Probed
[   19.954047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.960633] ehci-pci: EHCI PCI platform driver
[   19.965147] ehci-platform: EHCI generic platform driver
[   19.970506] ehci-platform 16f0000000000.ehci: EHCI Host Controller
[   19.976718] ehci-platform 16f0000000000.ehci: new USB bus registered, assigned bus number 1
[   19.985200] ehci-platform 16f0000000000.ehci: irq 56, io mem 0x16f0000000000
[   20.017793] ehci-platform 16f0000000000.ehci: USB 2.0 started, EHCI 1.00
[   20.024994] hub 1-0:1.0: USB hub found
[   20.028800] hub 1-0:1.0: 2 ports detected
[   20.033159] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   20.039386] ohci-platform: OHCI generic platform driver
[   20.044736] ohci-platform 16f0000000400.ohci: Generic Platform OHCI controller
[   20.052018] ohci-platform 16f0000000400.ohci: new USB bus registered, assigned bus number 2
[   20.060465] ohci-platform 16f0000000400.ohci: irq 56, io mem 0x16f0000000400
[   20.132196] hub 2-0:1.0: USB hub found
[   20.135990] hub 2-0:1.0: 2 ports detected
[   20.140469] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   20.145728] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 3
[   20.153305] xhci_hcd 0000:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x0000000004000000
[   20.162590] xhci_hcd 0000:01:00.0: xHCI Host Controller
[   20.167854] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 4
[   20.175272] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[   20.182086] hub 3-0:1.0: USB hub found
[   20.185880] hub 3-0:1.0: 2 ports detected
[   20.190223] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   20.198671] hub 4-0:1.0: USB hub found
[   20.202463] hub 4-0:1.0: 2 ports detected
[   20.207070] usbcore: registered new interface driver usb-storage
[   20.213500] i2c-octeon 1180000001000.i2c: probed
[   20.218834] i2c-octeon 1180000001200.i2c: probed
[   20.223585] octeon_wdt: Initial granularity 5 Sec
[   20.228739] EDAC DEVICE0: Giving out device to module octeon-cpu controller cache: DEV octeon_pc_edac (INTERRUPT)
[   20.239160] EDAC DEVICE1: Giving out device to module octeon-l2c controller octeon_l2c_err: DEV octeon_l2c_edac (POLLED)
[   20.250200] EDAC MC0: Giving out device to module octeon-lmc controller co_lmc_err: DEV octeon_lmc_edac.0 (POLLED)
[   20.261400] platform 1180000002000.mmc:mmc-slot@0: Got CD GPIO
[   20.263736] Interface 0 has 4 ports (SGMII)
[   20.267270] platform 1180000002000.mmc:mmc-slot@0: Got WP GPIO
[   20.271487] Interface 1 has 4 ports (SGMII)
[   20.281509] cvm_oct_get_port_status running over 3 interfaces
[   20.287266] cvm_oct_get_port_status interface 0, #ports = 4
[   20.292863] cvm_oct_get_port_status 0/0, mode = 6, port_node = 1
[   20.299916] cvm_oct_get_port_status 0/1, mode = 6, port_node = 1
[   20.305944] cvm_oct_get_port_status 0/2, mode = 6, port_node = 1
[   20.311981] sgmii-mac-1000x-mode found setting..
[   20.316609] cvm_oct_get_port_status 0/3, mode = 6, port_node = 1
[   20.322634] sgmii-mac-1000x-mode found setting..
[   20.327259] cvm_oct_get_port_status interface 1, #ports = 4
[   20.327801] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   20.332848] cvm_oct_get_port_status 1/0, mode = 6, port_node = 1
[   20.345834] cvm_oct_get_port_status 1/1, mode = 6, port_node = 1
[   20.351860] cvm_oct_get_port_status 1/2, mode = 6, port_node = 1
[   20.357888] cvm_oct_get_port_status 1/3, mode = 6, port_node = 1
[   20.363907] cvm_oct_get_port_status interface 2, #ports = 0
[   20.369505] __cvmx_helper_sgmii_hardware_init_one_time, interface 0/0, protocol SGMII, MAC mode
[   20.378227] __cvmx_helper_sgmii_hardware_init_one_time, interface 0/1, protocol SGMII, MAC mode
[   20.386941] __cvmx_helper_sgmii_hardware_init_one_time, interface 0/2, protocol 1000BASE-X
[   20.395231] __cvmx_helper_sgmii_hardware_init_one_time, interface 0/3, protocol 1000BASE-X
[   20.403531] __cvmx_helper_sgmii_hardware_init_one_time, interface 1/0, protocol SGMII, MAC mode
[   20.412260] __cvmx_helper_sgmii_hardware_init_one_time, interface 1/1, protocol SGMII, MAC mode
[   20.420983] __cvmx_helper_sgmii_hardware_init_one_time, interface 1/2, protocol SGMII, MAC mode
[   20.429703] __cvmx_helper_sgmii_hardware_init_one_time, interface 1/3, protocol SGMII, MAC mode
[   20.442604] NET: Registered PF_INET6 protocol family
[   20.449708] Segment Routing with IPv6
[   20.453428] In-situ OAM (IOAM) with IPv6
[   20.457423] NET: Registered PF_PACKET protocol family
[   20.462665] 8021q: 802.1Q VLAN Support v1.8
[   20.468198] OF: fdt: not creating '/sys/firmware/fdt': CRC check failed
[   20.475029] Waiting for root device PARTUUID=01029395-02...
[   20.544784] usb-storage 1-1:1.0: USB Mass Storage device detected
[   20.551227] scsi host0: usb-storage 1-1:1.0
[   21.628839] scsi 0:0:0:0: Direct-Access     Generic  Ultra HS-COMBO   1.98 PQ: 0 ANSI: 0
[   21.638676] sd 0:0:0:0: [sda] 14942208 512-byte logical blocks: (7.65 GB/7.13 GiB)
[   21.647417] sd 0:0:0:0: [sda] Write Protect is off
[   21.652243] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[   21.653420] sd 0:0:0:0: [sda] No Caching mode page found
[   21.658764] sd 0:0:0:0: [sda] Assuming drive cache: write through
[   21.669937]  sda: sda1 sda2
[   21.676299] sd 0:0:0:0: [sda] Attached SCSI removable disk
[   21.705226] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[   21.712585] Freeing unused kernel image (initmem) memory: 1288K
[   21.718589] This architecture does not have kernel memory protection.
[   21.725051] Run /sbin/init as init process
[   21.729165]   with arguments:
[   21.729171]     /sbin/init
[   21.729175]   with environment:
[   21.729180]     HOME=/
[   21.729184]     TERM=linux
[   21.996323] init: Console is alive
[   21.999923] init: - watchdog -
[   22.479601] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[   22.507126] usbcore: registered new interface driver uas
[   22.513283] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[   22.526818] init: - preinit -
[   23.436193] random: jshn: uninitialized urandom read (4 bytes read)
[   23.467194] random: jshn: uninitialized urandom read (4 bytes read)
[   23.526980] random: jshn: uninitialized urandom read (4 bytes read)
[   23.726907] octeon_mgmt 1070000100000.ethernet mgmt0: Link is up - 1000/Full
[   23.734019] IPv6: ADDRCONF(NETDEV_CHANGE): mgmt0: link becomes ready
[   25.828624] loop0: detected capacity change from 0 to 12832264
[   25.897789] loop0: detected capacity change from 12832264 to 12798984
[   25.908604] mount_root: overlay filesystem in /dev/loop0 has not been formatted yet
[   25.926673] random: procd: uninitialized urandom read (4 bytes read)
[   26.537791] random: crng init done
[   26.541210] random: 2 urandom warning(s) missed due to ratelimiting
[   27.751178] F2FS-fs (loop0): Found nat_bits in checkpoint
[   27.843842] F2FS-fs (loop0): Mounted with checkpoint version = 8f5dc87
[   27.850851] mount_root: overlay filesystem has not been fully initialized yet
[   27.858461] mount_root: switching to f2fs overlay
[   27.869291] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[   28.005725] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   28.019849] EXT4-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[   28.029927] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null). Quota mode: disabled.
[   28.396911] urandom-seed: Seed file not found (/etc/urandom.seed)
[   28.463971] octeon_mgmt 1070000100000.ethernet mgmt0: Link is down
[   28.477588] procd: - early -
[   28.480876] procd: - watchdog -
[   29.037750] procd: - watchdog -
[   29.041147] procd: - ubus -
[   29.115650] procd: - init -
[   29.387377] urngd: v1.0.2 started.
[   29.410695] kmodloader: loading kernel modules from /etc/modules.d/*
[   29.437680] NET: Registered PF_ALG protocol family
[   29.453331] NET: Registered PF_KEY protocol family
[   29.459642] Initializing XFRM netlink socket
[   29.465358] tun: Universal TUN/TAP device driver, 1.6
[   29.478632] cryptodev: driver 1.12 loaded.
[   29.484078] i2c_dev: i2c /dev entries driver
[   29.490520] n821_cpld_i2c: module is from the staging directory, the quality is unknown, you have been warned.
[   29.501573] mdio_i2c_gen: module is from the staging directory, the quality is unknown, you have been warned.
[   29.512219] n821_cpld_fan: module is from the staging directory, the quality is unknown, you have been warned.
[   29.522990] n821_cpld_psu: module is from the staging directory, the quality is unknown, you have been warned.
[   29.537848] hid: raw HID events driver (C) Jiri Kosina
[   29.547716] n821-cpld 1e000000.cpld: probed
[   29.552613] n821-cpld-i2c 1e000038.n821-cpld-i2c: probed, base = 800000001e000038
[   29.560578] n821-cpld-fan 1e000000.cpld:n821-cpld-fan: probed
[   29.566872] n821-cpld-psu 1e000000.cpld:n821-cpld-psu: probed
[   29.573461] input: 1e000000.cpld:reset-button as /devices/platform/soc@0/1180000000000.bootbus/1e000000.cpld/1e000000.cpld:reset-button/input/input0
[   29.587470] leds-syscon 1e000000.cpld:sysled: registered LED (null)
[   29.594162] leds-syscon 1e000000.cpld:sysled-flash: registered LED (null)
[   29.601384] leds-syscon 1e000000.cpld:statusled: registered LED (null)
[   29.608324] leds-syscon 1e000000.cpld:lan0-linkled: registered LED (null)
[   29.615539] leds-syscon 1e000000.cpld:lan0-actled: registered LED (null)
[   29.622645] leds-syscon 1e000000.cpld:lan1-linkled: registered LED (null)
[   29.629860] leds-syscon 1e000000.cpld:lan1-actled: registered LED (null)
[   29.636932] leds-syscon 1e000000.cpld:lan2-linkled: registered LED (null)
[   29.644167] leds-syscon 1e000000.cpld:lan2-actled: registered LED (null)
[   29.651273] leds-syscon 1e000000.cpld:lan3-linkled: registered LED (null)
[   29.658548] leds-syscon 1e000000.cpld:lan3-actled: registered LED (null)
[   29.665632] leds-syscon 1e000000.cpld:lan4-linkled: registered LED (null)
[   29.672938] leds-syscon 1e000000.cpld:lan4-actled: registered LED (null)
[   29.680083] leds-syscon 1e000000.cpld:lan5-linkled: registered LED (null)
[   29.687287] leds-syscon 1e000000.cpld:lan5-actled: registered LED (null)
[   29.694408] leds-syscon 1e000000.cpld:lan6-linkled: registered LED (null)
[   29.701621] leds-syscon 1e000000.cpld:lan6-actled: registered LED (null)
[   29.708725] leds-syscon 1e000000.cpld:lan7-linkled: registered LED (null)
[   29.715930] leds-syscon 1e000000.cpld:lan7-actled: registered LED (null)
[   29.724053] mdio_bus i2c:3-0056: MDIO device at address 22 is missing.
[   29.730731] i2c i2c-2: Added multiplexed i2c bus 3
[   29.736461] mdio_bus i2c:4-0056: MDIO device at address 22 is missing.
[   29.743148] i2c i2c-2: Added multiplexed i2c bus 4
[   29.748909] mdio_bus i2c:5-0056: MDIO device at address 22 is missing.
[   29.755569] i2c i2c-2: Added multiplexed i2c bus 5
[   29.761361] mdio_bus i2c:6-0056: MDIO device at address 22 is missing.
[   29.768046] i2c i2c-2: Added multiplexed i2c bus 6
[   29.773785] mdio_bus i2c:7-0056: MDIO device at address 22 is missing.
[   29.780471] i2c i2c-2: Added multiplexed i2c bus 7
[   29.786214] mdio_bus i2c:8-0056: MDIO device at address 22 is missing.
[   29.792886] i2c i2c-2: Added multiplexed i2c bus 8
[   29.798849] mdio_bus i2c:9-0056: MDIO device at address 22 is missing.
[   29.805511] i2c i2c-2: Added multiplexed i2c bus 9
[   29.811286] mdio_bus i2c:10-0056: MDIO device at address 22 is missing.
[   29.818021] i2c i2c-2: Added multiplexed i2c bus 10
[   29.823200] i2c i2c-2: Added multiplexed i2c bus 11
[   29.837599] n821_cpld_gpio: module is from the staging directory, the quality is unknown, you have been warned.
[   29.848339] n821-cpld-gpio 1e000000.cpld:n821-cpld-gpio: probed
[   29.860760] rtc-ds1307 1-006f: registered as rtc0
[   29.865756] rtc-ds1307 1-006f: setting system clock to 2023-07-18T16:45:00 UTC (1689698700)
[   29.905639] PPP generic driver version 2.4.2
[   29.910834] NET: Registered PF_PPPOX protocol family
[   29.917948] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[   29.925805] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[   29.938883] kmodloader: done loading kernel modules from /etc/modules.d/*
[   36.273793] octeon_mgmt 1070000100000.ethernet mgmt0: Link is up - 1000/Full
[   36.280970] br-lan: port 1(mgmt0) entered blocking state
[   36.286349] br-lan: port 1(mgmt0) entered disabled state
[   36.291935] device mgmt0 entered promiscuous mode
[   36.299004] br-lan: port 1(mgmt0) entered blocking state
[   36.304352] br-lan: port 1(mgmt0) entered forwarding state
[   36.325362] lan0: 1000 Mbps Full duplex, port 2, queue 2
[   37.337934] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready