-
-
Save bmcbm/375f14eaa17f88756b4bdbbebbcfd029 to your computer and use it in GitHub Desktop.
# Use systemd for managing NVIDIA driver suspend in drivers ====>>> PRIOR to version 470 <<<===== | |
# https://download.nvidia.com/XFree86/Linux-x86_64/450.66/README/powermanagement.html | |
# https://forums.developer.nvidia.com/t/unable-to-set-nvidia-kernel-module-parameters/161306 | |
# Please note: In Fedora Linux you may need to just install the xorg-x11-drv-nvidia-power pakage | |
# as sugested by @goombah88 in the comments below. | |
TMP_PATH=/var/tmp | |
TMPL_PATH=/usr/share/doc/nvidia-driver-460/ | |
echo "options nvidia NVreg_PreserveVideoMemoryAllocations=1 NVreg_TemporaryFilePath=${TMP_PATH}" | sudo tee /etc/modprobe.d/nvidia-power-management.conf | |
sudo install --mode 644 "${TMPL_PATH}/nvidia-suspend.service" /etc/systemd/system | |
sudo install --mode 644 "${TMPL_PATH}/nvidia-hibernate.service" /etc/systemd/system | |
sudo install --mode 644 "${TMPL_PATH}/nvidia-resume.service" /etc/systemd/system | |
sudo install "${TMPL_PATH}/nvidia" /lib/systemd/system-sleep | |
sudo install "${TMPL_PATH}/nvidia-sleep.sh" /usr/bin | |
sudo systemctl enable nvidia-suspend.service | |
sudo systemctl enable nvidia-hibernate.service | |
sudo systemctl enable nvidia-resume.service | |
is there any reason this is not set by default? i'm using kubuntu 23.04 with 535 driver and i had to follow this to get suspend working working, although i had to only enable the services.
What is "this"... you mean prime-select? ... if it is not on "Nvidia-on-demand" we can not use discrete graphics on the laptop..
I currently have prime and Optimus manager installed. Driver version is 535.54.03 . I am facing the suspend issue when laptop is in hybrid or discrete graphics mode but no issue on integrated mode. What steps should I follow to solve this issue?
Hi I'm also facing the same issue on ubuntu 22.10 / Nvidia-driver-535. I'm not sure what exact steps to be taken to resolve the suspend issue. The device wakes up immediately after suspend. If manually suspended, the graphics has issues after wakeup and external monitor does not work post suspend.
Yeah . I didn't face that issue earlier . It's fairly recent for me. I was on Fedora 37 when I started facing the issue.. I tried everything then but it didn't work . Then I switched to EndeavourOS and followed the steps mentioned in post but the issue didn't resolve. I came across post where they mentioned sometimes having less SWAP partition can cause that issue so I created new SWAP partition and again the issue didn't resolve.
I was earlier dual booting with windows 10, since this issue was not resolved I reverted back to Windows removing the Linux partition. Main issue is without suspend there is constant use of device and there is high power consumption, suspending will reboot system causing loss of work. Suspend works fine on integrated graphics but that's not viable since I can't use my external display . So I switched. Hopefully someone will figure out what exactly is the issue!
The solution by @ermenkov is the only thing that worked. Ubuntu 22.02 / driver version 535.104.05
The other issue was bluetooth waking up the system immediately after suspend. That was fixed with this script in /lib/systemd/system-sleep/bluetooth-suspend
(From stack overflow or a forum, I forget where)
#!/bin/bash
# Makes sure bluetooth service is not running while suspended.
if [ "${1}" == "pre" ]; then
service bluetooth stop
elif [ "${1}" == "post" ]; then
service bluetooth start
fi
Whoever gave this idea worked for me:
sudo rm /etc/systemd/system/systemd-hibernate.service.requires/nvidia-resume.service
sudo rm /etc/systemd/system/systemd-hibernate.service.requires/nvidia-hibernate.service
sudo rm /etc/systemd/system/systemd-suspend.service.requires/nvidia-resume.service
sudo rm /etc/systemd/system/systemd-suspend.service.requires/nvidia-suspend.service
My nvidia info using nvidia-smi
command:
Wed Sep 6 19:56:52 2023
+---------------------------------------------------------------------------------------+
| NVIDIA-SMI 535.104.05 Driver Version: 535.104.05 CUDA Version: 12.2 |
|-----------------------------------------+----------------------+----------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+======================+======================|
| 0 NVIDIA GeForce RTX 3060 Ti Off | 00000000:B3:00.0 On | N/A |
| 0% 48C P8 21W / 240W | 345MiB / 8192MiB | 36% Default |
| | | N/A |
+-----------------------------------------+----------------------+----------------------+
+---------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=======================================================================================|
| 0 N/A N/A 2404 G /usr/lib/xorg/Xorg 179MiB |
| 0 N/A N/A 2575 G /usr/bin/gnome-shell 98MiB |
| 0 N/A N/A 50045 G ...2403833,13679958894095400614,262144 58MiB |
+---------------------------------------------------------------------------------------+
System Name:
Dell Inc. Precision 5820 Tower
Ubuntu 22.04.3 LTS
I'm on Ubuntu 22.04, and after installing CUDA I was unable to suspend. The following steps worked for me:
- Inside
/etc/systemd
, delete all of the files that includenvidia
andsuspend
orhibernate
. There are three services inside/etc/systemd/system
, which I deleted. There are also some other dead nvidia links insidesystemd-hibernate.service.requires
,systemd-suspend.service.requires
, which I deleted.I wish I knew the exact names of the files that I deleted, but since they're now gone, I can't remember their exact paths. But in a nutshell, go into
/etc/systemd
, and dofind . -iname nv*
, and then delete all the of thesuspend
,resume
, andhibernate
scripts.DO NOT DELETE
nvidia-powerd.service
andnvidia-persistenced.service
.Once you're done with that, do
systemctl daemon-reload
.
Worked for me as well!
I have a Dell Inspiron 15 5000 with Nvidia driver 470.199.02
on Ubuntu 20.04 LTS.
sudo rm /etc/systemd/system/systemd-hibernate.service.requires/nvidia-resume.service sudo rm /etc/systemd/system/systemd-hibernate.service.requires/nvidia-hibernate.service sudo rm /etc/systemd/system/systemd-suspend.service.requires/nvidia-resume.service sudo rm /etc/systemd/system/systemd-suspend.service.requires/nvidia-suspend.serviceThis works perfectly
Also worked for me after installing CUDA libraries on Ubuntu 22.04. Prior to this I had Nvidia drivers working with suspend without issue.
I know this gist is for NVIDIA drivers with versions <470, but I wanted to if anyone has had any luck getting drivers 525, or 535 to work.
GPU: Nvidia 4060 TI
Driver: 535.129.03
CUDA Version: 12.2
CPU: AMD 5700X
Board: Gigabyte 550 Gaming V2
OS: Ubuntu 22.04.3 LTS
Basically, when I select suspend on Ubuntu, my screens turn off, and my fans spin up to a very high RPM. Then I am unable to wake it up from this state, and must toggle the PSU switch off and on again. After that, the login screen is displayed.
I know this is an Ubuntu related issue because I can put my computer to sleep on Windows 10, and wake it back up again.
What I've tried:
- Editing
/etc/defaults/grub
(GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="nouveau.blacklist=1") - Removing all NVIDIA services in
/etc/systemd
(https://askubuntu.com/a/1409631/1554429) - Installing different Nvidia drivers, both open source and proprietary options
- Setting the Nvidia sleep shell script to only execute
exit 0
- Disabled secure boot in BIOS
- Disabled CSM in BIOS
- Enabled mouse and key presses to wake in BIOS
- Disabling Nvidia systemd state management, https://askubuntu.com/a/1436923/1554429
- Other stuff...
Yes, I got it to run on an IBM Thinkpad P52 with:
GPU: NVIDIA GP107GLM [Quadro P2000 Mobile]
Driver: 535.129.03
CPU: Intel Xeon E-2176M
Distro: Linux Mint 21.2 Victoria
base: Ubuntu 22.04 jammy
Kernel: 5.15.0-89-generic x86_64
Desktop: Xfce 4.18.1
My 'trick' ist to only use:
sudo pm-suspend
Anything related to systemd suspend, closing lid etc. else will fail miserably, end with a hanging OS and a hard reboot. Very disappointing, for quite a long time already.
I'm on Ubuntu 22.04, and after installing CUDA I was unable to suspend. The following steps worked for me:
- Inside
/etc/systemd
, delete all of the files that includenvidia
andsuspend
orhibernate
. There are three services inside/etc/systemd/system
, which I deleted. There are also some other dead nvidia links insidesystemd-hibernate.service.requires
,systemd-suspend.service.requires
, which I deleted.I wish I knew the exact names of the files that I deleted, but since they're now gone, I can't remember their exact paths. But in a nutshell, go into
/etc/systemd
, and dofind . -iname nv*
, and then delete all the of thesuspend
,resume
, andhibernate
scripts.
DO NOT DELETEnvidia-powerd.service
andnvidia-persistenced.service
.
Once you're done with that, dosystemctl daemon-reload
.Worked for me as well!
I have a Dell Inspiron 15 5000 with Nvidia driver
470.199.02
on Ubuntu 20.04 LTS.
This worked for me too! I have a Razer Blade 14 2022 with Nvidia driver 535.129.03 on Ubuntu 23.10
This also worked for me on an XPS 15 with a 3050 Ti (Ampere), Ubuntu 22.04, driver 550.
This fixed my pci_pm_suspend() and the PreserveVideoMemory stuff that would pop up and prevent laptop sleep.
If you deleted the service files, like nvidia-powerd.service or nvidia-persistenced.service, you either find them here or you can reinstall the drivers like this.
After reinstalling, I was able to see the service files, and then doing what the OP said worked.
Doing systemctl list-unit-files | grep nvidia
now gets me:
joao@joao-XPS-15-9520:~$ systemctl list-unit-files | grep nvidia
nvidia-hibernate.service enabled enabled
nvidia-persistenced.service static -
nvidia-resume.service enabled enabled
nvidia-suspend.service enabled enabled
Good luck!
This also worked for me on an XPS 15 with a 3050 Ti (Ampere), Ubuntu 22.04, driver 550.
...
So far seems to have work on my Lenovo Legion Slim 7 4060 PopOS kernel 6.8, also driver 550. Kind of frustrating because PopOS ships with nvidia drivers and so everytime I have to update OS it updates my drivers 😅 and I have to repeat this process.
nvidia-hibernate.service enabled enabled
nvidia-powerd.service enabled enabled
nvidia-resume.service enabled enabled
nvidia-suspend.service enabled enabled
The method works. In case you need fresh files install the services, you can get your driver version from NVIDIA. Use
nvidia-smi
to get the exact version and then run the.run
file with--extract-only
flag:sudo bash NVIDIA-Linux-x86_64-515.65.01.run --extract-only
.Then you run the given commands setting the
TMPL_PATH
to the path where you've extracted the files. Keep in mind that the files for this driver (515.65.01) have a slightly different locations as stated in the original post. So the updated commands should be like this:TMPL_PATH=/home/user/Downloads/NVIDIA-Linux-x86_64-515.65.01/systemd sudo install --mode 644 "${TMPL_PATH}/system/nvidia-suspend.service" /etc/systemd/system sudo install --mode 644 "${TMPL_PATH}/system/nvidia-hibernate.service" /etc/systemd/system sudo install --mode 644 "${TMPL_PATH}/system/nvidia-resume.service" /etc/systemd/system sudo install "${TMPL_PATH}/system-sleep/nvidia" /lib/systemd/system-sleep sudo install "${TMPL_PATH}/nvidia-sleep.sh" /usr/bin sudo systemctl enable nvidia-suspend.service sudo systemctl enable nvidia-hibernate.service sudo systemctl enable nvidia-resume.service
535.183.01 works! thanks !
Can’t resume after suspend with 535 driver on OS: Linux Mint 21.3 x86_64
Kernel: 5.15.0-118-generic
l am experiencing an issue where your Linux Mint 21.3 system can’t resume after being suspended when using the nvidia-driver-535. with NVIDIA drivers on Linux systems. Let’s clarify the situation:
My system boots up normally with the NVIDIA driver installed.
When l put the computer to sleep (suspend mode), it appears to enter sleep mode successfully.
meaning When you try to wake the computer from sleep, it fails to resume properly. it stopped to resume with black screen with all system information displayed on the screen, then l need do nothing until I hard-restarted o options
this is very frustrating,
I’m happy to provide further information about the system
Thanks in advance for any assistance you can provide.
@inspiron:~$ nvidia-smi
Fri Aug 9 11:12:52 2024
±--------------------------------------------------------------------------------------+
| NVIDIA-SMI 535.183.01 Driver Version: 535.183.01 CUDA Version: 12.2 |
|-----------------------------------------±---------------------±---------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+======================+======================|
| 0 NVIDIA GeForce GTX 960M Off | 00000000:02:00.0 Off | N/A |
| N/A 41C P8 N/A / 200W | 6MiB / 4096MiB | 0% Default |
| | | N/A |
±----------------------------------------±---------------------±---------------------+
±--------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=======================================================================================|
| 0 N/A N/A 1209 G /usr/lib/xorg/Xorg 2MiB |
±--------------------------------------------------------------------------------------+
inxi -Sx
System:
Host: Inspiron Kernel: 5.15.0-118-generic x86_64 bits: 64 compiler: gcc
v: 11.4.0 Desktop: Cinnamon 6.0.4 Distro: Linux Mint 21.3 Virginia
base: Ubuntu 22.04 jammy
inxi -Gx
Graphics:
Device-1: Intel HD Graphics 530 vendor: Dell driver: i915 v: kernel
bus-ID: 00:02.0
Device-2: NVIDIA GM107M [GeForce GTX 960M] vendor: Dell driver: nvidia
v: 535.183.01 bus-ID: 02:00.0
Device-3: Sunplus Innovation Integrated_Webcam_HD type: USB
driver: uvcvideo bus-ID: 1-4:3
Display: x11 server: X.Org v: 1.21.1.4 driver: X:
loaded: modesetting,nvidia unloaded: fbdev,nouveau,vesa gpu: i915
resolution: 1: 1600x90060Hz 2: 1600x90060Hz
OpenGL: renderer: Mesa Intel HD Graphics 530 (SKL GT2)
v: 4.6 Mesa 23.2.1-1ubuntu3.1~22.04.2 direct render: Yes
systemctl | grep nvidia
sys-bus-pci-drivers-nvidia.device loaded active plugged /sys/bus/pci/drivers/nvidia
nvidia-persistenced.service loaded active running NVIDIA Persistence Daemon
After so many trials I found a solution for myself. I'm not sure it'll work for yours but at least it's working for my system now.
Here' what I did:
- Switch back to nouveau open source driver (if you're using proprietary driver)
- Manually install Nvidia 550 driver ( sudo apt install nvidia-driver-550)
- Reboot system and check if Nvidia 550 is installed
- Create nvidia.conf file and add these lines into it (not sure about yours, but my system doesn't have this file)
- nvidia.conf file will be in /etc/modprobe.d
sudo nano /etc/modprobe.d/nvidia.conf - Add these lines into it:
options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp - Reboot your system.
- That's work for me
My system info:
Dell Optiplex 9020 Intel i7-4790 4GHz
Memory 16GBytes
Video card: Nvidia GeForce GTX 745
Kernel 6.8.0-41-generic
Linux Mint 22, Cinammon 6.2.9
(By the way, I tried this method on Nvidia driver 535 but it didn't work. Also, I got some ACPI errors before restart/shutdown, but not on start up, other than that, the system is running fine)
I hope this info help someone who is looking for a solution of not wake-up from suspend as mind.
Cheers !!!
After so many trials I found a solution for myself. I'm not sure it'll work for yours but at least it's working for my system now. Here' what I did:
- Switch back to nouveau open source driver (if you're using proprietary driver)
- Manually install Nvidia 550 driver ( sudo apt install nvidia-driver-550)
- Reboot system and check if Nvidia 550 is installed
- Create nvidia.conf file and add these lines into it (not sure about yours, but my system doesn't have this file)
- nvidia.conf file will be in /etc/modprobe.d
sudo nano /etc/modprobe.d/nvidia.conf- Add these lines into it:
options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp- Reboot your system.
- That's work for me
My system info: Dell Optiplex 9020 Intel i7-4790 4GHz Memory 16GBytes Video card: Nvidia GeForce GTX 745 Kernel 6.8.0-41-generic Linux Mint 22, Cinammon 6.2.9
(By the way, I tried this method on Nvidia driver 535 but it didn't work. Also, I got some ACPI errors before restart/shutdown, but not on start up, other than that, the system is running fine) I hope this info help someone who is looking for a solution of not wake-up from suspend as mind. Cheers !!!
l have tried this hack NVIDIA sleep script: /usr/bin/nvidia-sleep.sh
Adding exit 0 at the top of this script solved the problem.
This solution effectively bypasses the NVIDIA-specific sleep handling,
which was causing the suspend/resume issues. Here's how to implement this
fix properly many thanks :
Open the NVIDIA sleep script with sudo privileges:
sudo nano /usr/bin/nvidia-sleep.sh
Add exit 0 as the second line of the file,
#!/bin/bash
exit 0 <<---- This is the ;-) Hack
it worked for while, than the issue back again Can’t resume after suspend with 550 driver on OS: Linux Mint 21.3 x86_64
Kernel: 5.15.0-118-generic
Wed Sep 4 15:11:48 2024
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.107.02 Driver Version: 550.107.02 CUDA Version: 12.4 |
|-----------------------------------------+------------------------+----------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+========================+======================|
| 0 NVIDIA GeForce GTX 960M Off | 00000000:02:00.0 Off | N/A |
| N/A 39C P8 N/A / 200W | 7MiB / 4096MiB | 0% Default |
| | | N/A |
+-----------------------------------------+------------------------+----------------------+
+-----------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=========================================================================================|
| 0 N/A N/A 1115 G /usr/lib/xorg/Xorg 2MiB |
+-----------------------------------------------------------------------------------------+
l have also tried
nvidia.conf file will be in /etc/modprobe.d # tried this not working for me
sudo nano /etc/modprobe.d/nvidia.conf
Add these lines into it:
options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp
No Joy ;-( still have the same issue any help or pointer that would be greatly appreciated
This is my current setting and it's working for me (Linux Mint 22, Nvidia GeForce GTX 745 using Nvidia 550.107.02 driver)
sudo nano /etc/modprobe.d/nvidia-graphics-drivers-kms.conf
and add these lines into it:
options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp
The method works. In case you need fresh files install the services, you can get your driver version from NVIDIA. Use
nvidia-smi
to get the exact version and then run the.run
file with--extract-only
flag:sudo bash NVIDIA-Linux-x86_64-515.65.01.run --extract-only
.该方法有效。如果您需要新文件,请安装服务,您可以从 NVIDIA 获取您的驱动程序版本。使用nvidia-smi
获取确切版本,然后使用.run
文件和--extract-only
标志运行:sudo bash NVIDIA-Linux-x86_64-515.65.01.run --extract-only
。
Then you run the given commands setting theTMPL_PATH
to the path where you've extracted the files. Keep in mind that the files for this driver (515.65.01) have a slightly different locations as stated in the original post. So the updated commands should be like this:然后,您运行给定的命令,将TMPL_PATH
设置为您提取文件的路径。请记住,此驱动程序 (515.65.01) 的文件位置与原始帖子中所述略有不同。因此,更新后的命令应如下所示:TMPL_PATH=/home/user/Downloads/NVIDIA-Linux-x86_64-515.65.01/systemd sudo install --mode 644 "${TMPL_PATH}/system/nvidia-suspend.service" /etc/systemd/system sudo install --mode 644 "${TMPL_PATH}/system/nvidia-hibernate.service" /etc/systemd/system sudo install --mode 644 "${TMPL_PATH}/system/nvidia-resume.service" /etc/systemd/system sudo install "${TMPL_PATH}/system-sleep/nvidia" /lib/systemd/system-sleep sudo install "${TMPL_PATH}/nvidia-sleep.sh" /usr/bin sudo systemctl enable nvidia-suspend.service sudo systemctl enable nvidia-hibernate.service sudo systemctl enable nvidia-resume.service
535.183.01 works! thanks !535.183.01 有用!谢谢!
Sadly,it doesn't work for me.same is 535.183.01. Until now ,I have tried almost all methods ,no one work for me.It's so terrible.
same with me - Gentoo fully up to date as of today. - I'm not able to go past over 535.183.01 or kernel 6.9. Terrible.
Fix also stopped working for me. Frustrating. @chanh2018 what do these changes do?
Fix also stopped working for me. Frustrating. @chanh2018 what do these changes do?
To preserve video memory for NVIDIA. It works for me.
After a completely new install of Ubuntu, which was needed as my NVME SSD WD 750 1TB completely died suddenly, I reinstalled 24.04 on a new Samsung 780 1TB. Most worked smoothly except the Suspend. Resume gave me a black screen with
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] REquest device [fo:1f.0] fault index 0x0 [fault reason 0x25] Blocked compatibility format interrupt request
I just tried the following from @chanh2018 and I just got my first successful resume. 😀
sudo nano /etc/modprobe.d/nvidia-graphics-drivers-kms.conf
and add these lines into it:
options nvidia-drm fbdev=1
options nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp
Note: the error messages still appear quickly on screen, but the system no longer hangs after that...
I also have Mint 22 based on ubuntu 24.04 and had the same problem. This solved the problem for me:
Any news on this? Recently my new Working Notebook with dedicated nvidia gpu worked fine (with Ubuntu 23.04 and proprietary nvidia drivers). But after some update of Kernel and/or nvidia drivers my Notebook didn't wake-up from sleep mode. It's still available by SSH! But monitors keep off/no-signal whatever I do.
It totally sucks as I have to reboot (REISUB-Reboot) my Workstation nearly every morning and every morning I'm praying monitors won''t keep blank giving me the chance just to start working.
Any solution that works? I've tried nearly everything and now I'm even trying to totally disable sleep/hibernate/standby stuff.
Btw. I have linux-kernel 6.8.0-101041(-tuxedo) and (ubuntu/dpkg) nvidia drivers 560.
apparently fix is going to be available in upcoming 565 linux driver release. NVIDIA/open-gpu-kernel-modules#662 (comment)
sudo nano /etc/modprobe.d/nvidia-graphics-drivers-kms.conf
and add these lines into it:
options nvidia-drm fbdev=1 options
nvidia NVreg_PreserveVideoMemoryAllocations=1
options nvidia NVreg_TemporaryFilePath=/var/tmp
I can confirm this also fixes the resume from suspend problem for me:
Ubuntu 24.04, Nvidia Quadro M2000M, with the latest nvidia driver 560 and it works also on wayland
thank you @chanh2018!
is there any reason this is not set by default? i'm using kubuntu 23.04 with 535 driver and i had to follow this to get suspend working working, although i had to only enable the services.