Danfoss Ally TRV send external temperature (ZHA)

danfoss_trv_ext_temp_zha.yaml

blueprint:
  domain: automation
  name: Ally Temperature Update
  description: Update Danfoss Ally TRV external temperature with min/max refresh rate
  input:
    ally_device:
      name: Ally TRV Device
      description: Temperature reading will be sent to this device
      selector:
        device:
          manufacturer: Danfoss
          entity:
            domain: climate
    min_update_minutes:
      name: Minimum update interval
      description: >
        Updates will not be sent if time from last update is less than minimum interval.
        Normally 30min for uncovered, 5min for covered.
      selector:
        number:
          max: 360
          min: 1
          unit_of_measurement: minutes
          mode: box
    temp_sensor_id:
      name: Temperature Sensor
      description: External sensor from which the temperature will be read. Expects data format 12.3
      selector:
        entity:
          domain: sensor
          device_class: temperature
    max_update_timer_id:
      name: Timer entity
      description: >
        Timer that will be (re)started on update.
        Set this timer to slowest interval you want the device to update at.
        Normally 3h for uncovered, 30m for covered.
        Use separate timer for each automation.
      selector:
        entity:
          domain: timer
variables:
  device: !input ally_device
  ieee: "{{(device_attr(device, 'identifiers')|list)[0][1]}}"
  min_update_minutes: !input min_update_minutes
  temp_sensor_id: !input temp_sensor_id
trigger:
- platform: state
  entity_id:
  - !input temp_sensor_id
- platform: event
  event_type: timer.finished
  event_data:
    entity_id: !input max_update_timer_id
condition:
- condition: template
  value_template: >
    {{ as_timestamp(now()) - as_timestamp(state_attr(this.entity_id,'last_triggered'),0)|int
    > (60 * min_update_minutes) }}
action:
- service: zha.set_zigbee_cluster_attribute
  data:
    ieee: '{{ ieee }}'
    endpoint_id: 1
    cluster_id: 513
    cluster_type: in
    attribute: 16405
    value: '{{ (states(temp_sensor_id) | float * 100) | round(0) }}'
- service: timer.start
  target:
    entity_id: !input max_update_timer_id
mode: single